QEMU (aka Quick Emulator) built with a VMWARE VMXNET3 paravirtual NIC emulator support is vulnerable to crash issue. It could occur while reading Interrupt Mask Registers (IMR). A privileged (CAP_SYS_RAWIO) guest user could use this flaw to crash the QEMU process instance resulting in DoS.

The ehci_process_itd function in hw/usb/hcd-ehci.c in QEMU allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) via a circular isochronous transfer descriptor (iTD) list.

The eepro100 emulator in QEMU qemu-kvm blank allows local guest users to cause a denial of service (application crash and infinite loop) via vectors involving the command block list.

QEMU (aka Quick Emulator) built with the Rocker switch emulation support is vulnerable to an off-by-one error. It happens while processing transmit (tx) descriptors in 'tx_consume' routine, if a descriptor was to have more than allowed (ROCKER_TX_FRAGS_MAX=16) fragments. A privileged user inside guest could use this flaw to cause memory leakage on the host or crash the QEMU process instance resulting in DoS issue.

QEMU (aka Quick Emulator) built with a VMWARE VMXNET3 paravirtual NIC emulator support is vulnerable to crash issue. It occurs when a guest sends a Layer-2 packet smaller than 22 bytes. A privileged (CAP_SYS_RAWIO) guest user could use this flaw to crash the QEMU process instance resulting in DoS.

The cpu_physical_memory_write_rom_internal function in exec.c in QEMU (aka Quick Emulator) does not properly skip MMIO regions, which allows local privileged guest users to cause a denial of service (guest crash) via unspecified vectors.

The MSI-X MMIO support in hw/pci/msix.c in QEMU (aka Quick Emulator) allows local guest OS privileged users to cause a denial of service (NULL pointer dereference and QEMU process crash) by leveraging failure to define the .write method.

Stack-based buffer overflow in hw/scsi/scsi-bus.c in QEMU, when built with SCSI-device emulation support, allows guest OS users with CAP_SYS_RAWIO permissions to cause a denial of service (instance crash) via an invalid opcode in a SCSI command descriptor block.

An off-by-one error was found in the SCSI device emulation in QEMU. It could occur while processing MODE SELECT commands in mode_sense_page() if the 'page' argument was set to MODE_PAGE_ALLS (0x3f). A malicious guest could use this flaw to potentially crash QEMU, resulting in a denial of service condition.

A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device. The issue occurs while handling a "PVRDMA_CMD_CREATE_MR" command due to improper memory remapping (mremap). This flaw allows a malicious guest to crash the QEMU process on the host. The highest threat from this vulnerability is to system availability.

A potential stack overflow via infinite loop issue was found in various NIC emulators of QEMU in versions up to and including 5.2.0. The issue occurs in loopback mode of a NIC wherein reentrant DMA checks get bypassed. A guest user/process may use this flaw to consume CPU cycles or crash the QEMU process on the host resulting in DoS scenario.

Quick emulator (Qemu) built with the Cirrus CLGD 54xx VGA Emulator support is vulnerable to a divide by zero issue. It could occur while copying VGA data when cirrus graphics mode was set to be VGA. A privileged user inside guest could use this flaw to crash the Qemu process instance on the host, resulting in DoS.

QEMU 0.8.2 allows local users to crash a virtual machine via the divisor operand to the aam instruction, as demonstrated by "aam 0x0," which triggers a divide-by-zero error.

Several memory leaks were found in the virtio vhost-user GPU device (vhost-user-gpu) of QEMU in versions up to and including 6.0. They exist in contrib/vhost-user-gpu/vhost-user-gpu.c and contrib/vhost-user-gpu/virgl.c due to improper release of memory (i.e., free) after effective lifetime.

In QEMU through 5.0.0, an integer overflow was found in the SM501 display driver implementation. This flaw occurs in the COPY_AREA macro while handling MMIO write operations through the sm501_2d_engine_write() callback. A local attacker could abuse this flaw to crash the QEMU process in sm501_2d_operation() in hw/display/sm501.c on the host, resulting in a denial of service.

hw/pci/pci.c in QEMU 4.2.0 allows guest OS users to trigger an out-of-bounds access by providing an address near the end of the PCI configuration space.

sd_wp_addr in hw/sd/sd.c in QEMU 4.2.0 uses an unvalidated address, which leads to an out-of-bounds read during sdhci_write() operations. A guest OS user can crash the QEMU process.

In QEMU 5.0.0 and earlier, megasas_lookup_frame in hw/scsi/megasas.c has an out-of-bounds read via a crafted reply_queue_head field from a guest OS user.

hw/scsi/vmw_pvscsi.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (out-of-bounds access or infinite loop, and QEMU process crash) via a crafted page count for descriptor rings.

The pvscsi_ring_pop_req_descr function in hw/scsi/vmw_pvscsi.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and QEMU process crash) by leveraging failure to limit process IO loop to the ring size.

An integer overflow was found in QEMU 4.0.1 through 4.2.0 in the way it implemented ATI VGA emulation. This flaw occurs in the ati_2d_blt() routine in hw/display/ati-2d.c while handling MMIO write operations through the ati_mm_write() callback. A malicious guest could abuse this flaw to crash the QEMU process, resulting in a denial of service.

The get_cmd function in hw/scsi/esp.c in QEMU might allow local guest OS administrators to cause a denial of service (out-of-bounds write and QEMU process crash) via vectors related to reading from the information transfer buffer in non-DMA mode.

The sosendto function in slirp/udp.c in QEMU before 2.1.2 allows local users to cause a denial of service (NULL pointer dereference) by sending a udp packet with a value of 0 in the source port and address, which triggers access of an uninitialized socket.

In QEMU 1:4.1-1, 1:2.1+dfsg-12+deb8u6, 1:2.8+dfsg-6+deb9u8, 1:3.1+dfsg-8~deb10u1, 1:3.1+dfsg-8+deb10u2, and 1:2.1+dfsg-12+deb8u12 (fixed), when executing script in lsi_execute_script(), the LSI scsi adapter emulator advances 's->dsp' index to read next opcode. This can lead to an infinite loop if the next opcode is empty. Move the existing loop exit after 10k iterations so that it covers no-op opcodes as well.

Integer overflow in the VGA module in QEMU allows local guest OS users to cause a denial of service (out-of-bounds read and QEMU process crash) by editing VGA registers in VBE mode.

A potential DoS flaw was found in the virtio-fs shared file system daemon (virtiofsd) implementation of the QEMU version >= v5.0. Virtio-fs is meant to share a host file system directory with a guest via virtio-fs device. If the guest opens the maximum number of file descriptors under the shared directory, a denial of service may occur. This flaw allows a guest user/process to cause this denial of service on the host.

Qemu before 2.0 block driver for Hyper-V VHDX Images is vulnerable to infinite loops and other potential issues when calculating BAT entries, due to missing bounds checks for block_size and logical_sector_size variables. These are used to derive other fields like 'sectors_per_block' etc. A user able to alter the Qemu disk image could ise this flaw to crash the Qemu instance resulting in DoS.

An infinite loop flaw was found in the e1000 NIC emulator of the QEMU. This issue occurs while processing transmits (tx) descriptors in process_tx_desc if various descriptor fields are initialized with invalid values. This flaw allows a guest to consume CPU cycles on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.

A stack overflow via an infinite recursion vulnerability was found in the eepro100 i8255x device emulator of QEMU. This issue occurs while processing controller commands due to a DMA reentry issue. This flaw allows a guest user or process to consume CPU cycles or crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

An out-of-bounds heap buffer access issue was found in the ARM Generic Interrupt Controller emulator of QEMU up to and including qemu 4.2.0on aarch64 platform. The issue occurs because while writing an interrupt ID to the controller memory area, it is not masked to be 4 bits wide. It may lead to the said issue while updating controller state fields and their subsequent processing. A privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.

QEMU, possibly before 2.0.0, allows local users to cause a denial of service (divide-by-zero error and crash) via a zero value in the (1) tracks field to the seek_to_sector function in block/parallels.c or (2) extent_size field in the bochs function in block/bochs.c.

oss_write in audio/ossaudio.c in QEMU before 5.0.0 mishandles a buffer position.

QEMU through 8.0.0 could trigger a division by zero in scsi_disk_reset in hw/scsi/scsi-disk.c because scsi_disk_emulate_mode_select does not prevent s->qdev.blocksize from being 256. This stops QEMU and the guest immediately.

A flaw was found in the vhost-vsock device of QEMU. In case of error, an invalid element was not detached from the virtqueue before freeing its memory, leading to memory leakage and other unexpected results. Affected QEMU versions <= 6.2.0.

hw/rdma/rdma_backend.c in QEMU allows guest OS users to trigger out-of-bounds access via a PvrdmaSqWqe ring element with a large num_sge value.

hw/rdma/vmw/pvrdma_cmd.c in QEMU allows create_cq and create_qp memory leaks because errors are mishandled.

A NULL pointer dereference flaw was found in the SCSI emulation support of QEMU in versions before 6.0.0. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

A NULL pointer dereference flaw was found in the megasas-gen2 SCSI host bus adapter emulation of QEMU in versions before and including 6.0. This issue occurs in the megasas_command_cancelled() callback function while dropping a SCSI request. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

A flaw was found in the memory management API of QEMU during the initialization of a memory region cache. This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial of service. This flaw affects QEMU versions prior to 5.2.0.

hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address.

A divide-by-zero issue was found in dwc2_handle_packet in hw/usb/hcd-dwc2.c in the hcd-dwc2 USB host controller emulation of QEMU. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service.

QEMU (aka Quick Emulator) built to use 'address_space_translate' to map an address to a MemoryRegionSection is vulnerable to an OOB r/w access issue. It could occur while doing pci_dma_read/write calls. Affects QEMU versions >= 1.6.0 and <= 2.3.1. A privileged user inside guest could use this flaw to crash the guest instance resulting in DoS.

pci_change_irq_level in hw/pci/pci.c in QEMU before 5.1.1 has a NULL pointer dereference because pci_get_bus() might not return a valid pointer.

hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check before an ide_cancel_dma_sync call.

A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host, resulting in a denial of service.

fdctrl_write_data in hw/block/fdc.c in QEMU 5.0.0 has a NULL pointer dereference via a NULL block pointer for the current drive.

In QEMU 3.1, scsi_handle_inquiry_reply in hw/scsi/scsi-generic.c allows out-of-bounds write and read operations.

In QEMU 4.1.0, an out-of-bounds read flaw was found in the ATI VGA implementation. It occurs in the ati_cursor_define() routine while handling MMIO write operations through the ati_mm_write() callback. A malicious guest could abuse this flaw to crash the QEMU process, resulting in a denial of service.

An out-of-bounds memory access flaw was found in the ATI VGA device emulation of QEMU. This flaw occurs in the ati_2d_blt() routine while handling MMIO write operations when the guest provides invalid values for the destination display parameters. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service.