ABB Relion 630 devices 1.1 before 1.1.0.C0, 1.2 before 1.2.0.B3, and 1.3 before 1.3.0.A6 allow remote attackers to cause a denial of service (reboot) via a reboot command in an SPA message.

Improper Input Validation vulnerability in a particular configuration setting field of Hitachi Energy TXpert Hub CoreTec 4 product, allows an attacker with access to an authorized user with ADMIN or ENGINEER role rights to inject an OS command that is executed by the system. This issue affects: Hitachi Energy TXpert Hub CoreTec 4 version 2.0.0; 2.0.1; 2.1.0; 2.1.1; 2.1.2; 2.1.3; 2.2.0; 2.2.1.

Improper Input Validation vulnerability in Hitachi ABB Power Grids Relion 670 Series, Relion 670/650 Series, Relion 670/650/SAM600-IO, Relion 650, REB500, RTU500 Series, FOX615 (TEGO1), MSM, GMS600, PWC600 allows an attacker with access to the IEC 61850 network with knowledge of how to reproduce the attack, as well as the IP addresses of the different IEC 61850 access points (of IEDs/products), to force the device to reboot, which renders the device inoperable for approximately 60 seconds. This vulnerability affects only products with IEC 61850 interfaces. This issue affects: Hitachi ABB Power Grids Relion 670 Series 1.1; 1.2.3 versions prior to 1.2.3.20; 2.0 versions prior to 2.0.0.13; 2.1; 2.2.2 versions prior to 2.2.2.3; 2.2.3 versions prior to 2.2.3.2. Hitachi ABB Power Grids Relion 670/650 Series 2.2.0 versions prior to 2.2.0.13. Hitachi ABB Power Grids Relion 670/650/SAM600-IO 2.2.1 versions prior to 2.2.1.6. Hitachi ABB Power Grids Relion 650 1.1; 1.2; 1.3 versions prior to 1.3.0.7. Hitachi ABB Power Grids REB500 7.3; 7.4; 7.5; 7.6; 8.2; 8.3. Hitachi ABB Power Grids RTU500 Series 7.x version 7.x and prior versions; 8.x version 8.x and prior versions; 9.x version 9.x and prior versions; 10.x version 10.x and prior versions; 11.x version 11.x and prior versions; 12.x version 12.x and prior versions. Hitachi ABB Power Grids FOX615 (TEGO1) R1D02 version R1D02 and prior versions. Hitachi ABB Power Grids MSM 2.1.0 versions prior to 2.1.0. Hitachi ABB Power Grids GMS600 1.3.0 version 1.3.0 and prior versions. Hitachi ABB Power Grids PWC600 1.0 versions prior to 1.0.1.4; 1.1 versions prior to 1.1.0.1.

An input validation vulnerability exists in the Monitor Pro interface of MicroSCADA Pro and MicroSCADA X SYS600. An authenticated user can launch an administrator level remote code execution irrespective of the authenticated user's role.

Improper Input Validation vulnerability in the handling of a malformed IEC 104 TCP packet in the Hitachi Energy MicroSCADA X SYS600, MicroSCADA Pro SYS600. Upon receiving a malformed IEC 104 TCP packet, the malformed packet is dropped, however the TCP connection is left open. This may cause a denial-of-service if the affected connection is left open. This issue affects: Hitachi Energy MicroSCADA Pro SYS600 version 9.4 FP2 Hotfix 4 and earlier versions Hitachi Energy MicroSCADA X SYS600 version 10 to version 10.3.1. cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.0:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.4:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3.1:*:*:*:*:*:*:*

Improper Input Validation vulnerability in the handling of a specially crafted IEC 61850 packet with a valid data item but with incorrect data type in the IEC 61850 OPC Server in the Hitachi Energy MicroSCADA X SYS600, MicroSCADA Pro SYS600. The vulnerability may cause a denial-of-service on the IEC 61850 OPC Server part of the SYS600 product. This issue affects: Hitachi Energy MicroSCADA Pro SYS600 version 9.4 FP2 Hotfix 4 and earlier versions Hitachi Energy MicroSCADA X SYS600 version 10 to version 10.3.1. cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.0:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_pro_sys600:9.4:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.1.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.2.1:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3:*:*:*:*:*:*:* cpe:2.3:a:hitachienergy:microscada_x_sys600:10.3.1:*:*:*:*:*:*:*

A vulnerability exists in the HCI IEC 60870-5-104 function included in certain versions of the RTU500 series product. The vulnerability can only be exploited, if the HCI 60870-5-104 is configured with support for IEC 62351-5 and the CMU contains the license feature ‘Advanced security’ which must be ordered separately. If these preconditions are fulfilled, an attacker could exploit the vulnerability by sending a specially crafted message to the RTU500, causing the targeted RTU500 CMU to reboot. The vulnerability is caused by a missing input data validation which eventually if exploited causes an internal buffer to overflow in the HCI IEC 60870-5-104 function.

Lack of adequate input/output validation for ABB eSOMS versions 4.0 to 6.0.2 might allow an attacker to attack such as stored cross-site scripting by storing malicious content in the database.

An attacker may use a specially crafted message to force Relion 650 series (versions 1.3.0.5 and prior) or Relion 670 series (versions 1.2.3.18, 2.0.0.11, 2.1.0.1 and prior) to reboot, which could cause a denial of service.

Improper Input Validation vulnerability in the APDU parser in the Bidirectional Communication Interface (BCI) IEC 60870-5-104 function of Hitachi Energy RTU500 series allows an attacker to cause the receiving RTU500 CMU of which the BCI is enabled to reboot when receiving a specially crafted message. By default, BCI IEC 60870-5-104 function is disabled (not configured). This issue affects: Hitachi Energy RTU500 series CMU Firmware version 12.0.* (all versions); CMU Firmware version 12.2.* (all versions); CMU Firmware version 12.4.* (all versions).

Insufficient input validation in the subsystem for Intel(R) CSME before versions 11.8.70, 12.0.45 and 13.0.10; Intel(R) TXE before versions 3.1.70 and 4.0.20 may allow a privileged user to potentially enable information disclosure via local access.

The osf_partition function in fs/partitions/osf.c in the Linux kernel before 2.6.38 does not properly handle an invalid number of partitions, which might allow local users to obtain potentially sensitive information from kernel heap memory via vectors related to partition-table parsing.

The do_task_stat function in fs/proc/array.c in the Linux kernel before 2.6.39-rc1 does not perform an expected uid check, which makes it easier for local users to defeat the ASLR protection mechanism by reading the start_code and end_code fields in the /proc/#####/stat file for a process executing a PIE binary.

The do_replace function in net/bridge/netfilter/ebtables.c in the Linux kernel before 2.6.39 does not ensure that a certain name field ends with a '\0' character, which allows local users to obtain potentially sensitive information from kernel stack memory by leveraging the CAP_NET_ADMIN capability to replace a table, and then reading a modprobe command line.

The ocfs2_prepare_page_for_write function in fs/ocfs2/aops.c in the Oracle Cluster File System 2 (OCFS2) subsystem in the Linux kernel before 2.6.39-rc1 does not properly handle holes that cross page boundaries, which allows local users to obtain potentially sensitive information from uninitialized disk locations by reading a file.

liboping 1.3.2 allows users reading arbitrary files upon the local system.

A vulnerability in the secryptocfg export command of Brocade Fabric OS versions before 8.2.1, 8.1.2f, 8.0.2f, 7.4.2d could allow a local attacker to bypass the export file access restrictions and initiate a file copy from the source to a remote system.

A local privilege escalation vulnerability exists in the install helper tool of the Mac OS X version of Pixar Renderman, version 22.2.0. A user with local access can use this vulnerability to read any root file from the file system. An attacker would need local access to the machine to successfully exploit this flaw.

A consistency issue existed in the handling of application snapshots. The issue was addressed with improved handling of message deletions. This issue affected versions prior to iOS 12, tvOS 12, watchOS 5.

This issue was addressed with improved entitlements. This issue affected versions prior to iOS 12.

ecryptfs-setup-swap in eCryptfs before 111 does not prevent the unencrypted swap partition from activating during boot when using GPT partitioning and certain versions of systemd, which allows local users to obtain sensitive information via unspecified vectors.

A vulnerability was found in the Linux kernel in versions prior to v5.14-rc1. Missing size validations on inbound SCTP packets may allow the kernel to read uninitialized memory.

A missing address check in the callers of the show_opcodes() in the Linux kernel allows an attacker to dump the kernel memory at an arbitrary kernel address into the dmesg log.

Improper input validation in TrustZone memory transfer interface can lead to information disclosure in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking

The parse_rock_ridge_inode_internal function in fs/isofs/rock.c in the Linux kernel before 3.18.2 does not validate a length value in the Extensions Reference (ER) System Use Field, which allows local users to obtain sensitive information from kernel memory via a crafted iso9660 image.

Bytes can be written to fuses from Secure region which can be read later by HLOS in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in versions IPQ8074, MDM9150, MDM9206, MDM9607, MDM9650, MDM9655, MSM8996AU, QCA8081, QCS605, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 625, SD 632, SD 636, SD 650/52, SD 675, SD 712 / SD 710 / SD 670, SD 820, SD 820A, SD 835, SD 845 / SD 850, SD 8CX, SDA660, SDM439, SDM630, SDM660, Snapdragon_High_Med_2016, SXR1130.

Insufficient input validation in Kernel Mode Driver in Intel(R) Graphics Driver for Windows* before versions 10.18.x.5059 (aka 15.33.x.5059), 10.18.x.5057 (aka 15.36.x.5057), 20.19.x.5063 (aka 15.40.x.5063) 21.20.x.5064 (aka 15.45.x.5064) and 24.20.100.6373 potentially enables an unprivileged user to read memory via local access via local access.

Ceph does not properly sanitize encryption keys in debug logging for v4 auth. This results in the leaking of encryption key information in log files via plaintext. Versions up to v13.2.4 are vulnerable.

Insufficient input validation in Kernel Mode Driver in Intel(R) Graphics Driver for Windows* before versions 10.18.x.5059 (aka 15.33.x.5059), 10.18.x.5057 (aka 15.36.x.5057), 20.19.x.5063 (aka 15.40.x.5063) 21.20.x.5064 (aka 15.45.x.5064) and 24.20.100.6373 potentially enables an unprivileged user to cause an out of bound memory read via local access.

A flaw was found in Wildfly 9.x. A path traversal vulnerability through the org.wildfly.extension.undertow.deployment.ServletResourceManager.getResource method could lead to information disclosure of arbitrary local files.

Insufficient validation of guest context in the SNP Firmware could lead to a potential loss of guest confidentiality.

A possible guessing and confirming a byte memory vulnerability in Widevine trustlet prior to SMR Oct-2021 Release 1 allows attackers to read arbitrary memory address.

Intent redirection vulnerability in Group Sharing prior to 10.8.03.2 allows attacker to access contact information.

Improper sanitization of incoming intent in Samsung Contacts prior to SMR JUN-2021 Release 1 allows local attackers to get permissions to access arbitrary data with Samsung Contacts privilege.

The Sony Xperia L1 Android device with a build fingerprint of Sony/G3313/G3313:7.0/43.0.A.6.49/2867558199:user/release-keys contains the android framework (i.e., system_server) with a package name of android (versionCode=24, versionName=7.0) that has been modified by Sony or another entity in the supply chain. The system_server process in the core android package has an exported broadcast receiver that allows any app co-located on the device to programmatically initiate the taking of a screenshot and have the resulting screenshot be written to external storage. The taking of a screenshot is not transparent to the user; the device has a screen animation as the screenshot is taken and there is a notification indicating that a screenshot occurred. If the attacking app also requests the EXPAND_STATUS_BAR permission, it can wake the device up using certain techniques and expand the status bar to take a screenshot of the user's notifications even if the device has an active screen lock. The notifications may contain sensitive data such as text messages used in two-factor authentication. The system_server process that provides this capability cannot be disabled, as it is part of the Android framework. The notification can be removed by a local Denial of Service (DoS) attack to reboot the device.

Some improper access control in Bluetooth APIs prior to SMR Sep-2021 Release 1 allows untrusted application to get Bluetooth information.

Schneider Electric Wonderware Information Server (WIS) Portal 4.0 SP1 through 5.5 allows remote attackers to read arbitrary files or cause a denial of service via an XML external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue.

The ktrace utility in the FreeBSD kernel 8.4 before p11, 9.1 before p14, 9.2 before p7, and 9.3-BETA1 before p1 uses an incorrect page fault kernel trace entry size, which allows local users to obtain sensitive information from kernel memory via a kernel process trace.

An issue was discovered in the Headunit NTG6 in the MBUX Infotainment System on Mercedes-Benz vehicles through 2021. A Message Length is not checked in the HiQnet Protocol, leading to remote code execution.

A component of the HarmonyOS has a Improper Input Validation vulnerability. Local attackers may exploit this vulnerability to read at any address.

A component of the HarmonyOS has a Improper Input Validation vulnerability. Local attackers may exploit this vulnerability to read at any address.

pyxtrlock before 0.2 does not properly check the return values of the (1) xcb_grab_pointer and (2) xcb_grab_keyboard XCB library functions, which allows physically proximate attackers to gain access to the keyboard or mouse without unlocking the screen via unspecified vectors.

Improper validation of kernel buffer address while copying information back to user buffer can lead to kernel memory information exposure to user space in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables

Improper validation of kernel buffer address while copying information back to user buffer can lead to kernel memory information exposure to user space in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables

In mobile_log_d, there is a possible information disclosure due to improper input validation. This could lead to local information disclosure with System execution privileges needed. User interaction is not needed for exploitation. Product: Android; Versions: Android-11; Patch ID: ALPS05457039.

cPanel before 74.0.0 allows arbitrary file-read operations during File Restoration (SEC-436).

Huawei smartphones HONOR 20 PRO Versions earlier than 10.1.0.230(C432E9R5P1),Versions earlier than 10.1.0.231(C10E3R3P2),Versions earlier than 10.1.0.231(C185E3R5P1),Versions earlier than 10.1.0.231(C636E3R3P1);Versions earlier than 10.1.0.212(C432E10R3P4),Versions earlier than 10.1.0.213(C636E3R4P3),Versions earlier than 10.1.0.214(C10E5R4P3),Versions earlier than 10.1.0.214(C185E3R3P3);Versions earlier than 10.1.0.212(C00E210R5P1);Versions earlier than 10.1.0.160(C00E160R2P11);Versions earlier than 10.1.0.160(C00E160R2P11);Versions earlier than 10.1.0.160(C01E160R2P11);Versions earlier than 10.1.0.160(C00E160R2P11);Versions earlier than 10.1.0.160(C00E160R8P12);Versions earlier than 10.1.0.230(C432E9R5P1),Versions earlier than 10.1.0.231(C10E3R3P2),Versions earlier than 10.1.0.231(C636E3R3P1);Versions earlier than 10.1.0.225(C431E3R1P2),Versions earlier than 10.1.0.225(C432E3R1P2) contain an information vulnerability. A module has a design error that is lack of control of input. Attackers can exploit this vulnerability to obtain some information. This can lead to information leak.