An issue was discovered in PHP before 5.6.36, 7.0.x before 7.0.30, 7.1.x before 7.1.17, and 7.2.x before 7.2.5. An infinite loop exists in ext/iconv/iconv.c because the iconv stream filter does not reject invalid multibyte sequences.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. In verions prior to 4.6, an attacker can perform a denial-of-service attack by triggering an infinite loop in the processing of IPv6 neighbor solicitation (NS) messages. This type of attack can effectively shut down the operation of the system because of the cooperative scheduling used for the main parts of Contiki-NG and its communication stack. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

A vulnerability in the Excel XLM macro parsing module in Clam AntiVirus (ClamAV) Software versions 0.103.0 and 0.103.1 could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to improper error handling that may result in an infinite loop. An attacker could exploit this vulnerability by sending a crafted Excel file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process hang, resulting in a denial of service condition.

The Kepware DNP Master Driver for the KEPServerEX Communications Platform before 5.12.140.0 allows remote attackers to cause a denial of service (master-station infinite loop) via crafted DNP3 packets to TCP port 20000 and allows physically proximate attackers to cause a denial of service (master-station infinite loop) via crafted input over a serial line.

Grandstream HT800 series firmware version 1.0.17.5 and below is vulnerable to CPU exhaustion due to an infinite loop in the TR-069 service. Unauthenticated remote attackers can trigger this case by sending a one character TCP message to the TR-069 service.

A Denial of Service (DoS) vulnerability in zenml-io/zenml version 0.66.0 allows unauthenticated attackers to cause excessive resource consumption by sending malformed multipart requests with arbitrary characters appended to the end of multipart boundaries. This flaw in the multipart request boundary processing mechanism leads to an infinite loop, resulting in a complete denial of service for all users. Affected endpoints include `/api/v1/login` and `/api/v1/device_authorization`.

In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-openflow_v6.c had an infinite loop that was addressed by validating property lengths.

In the ihevcd_parse_slice_header function of ihevcd_parse_slice_header.c a slice address of zero after the first slice could result in an infinite loop. This could lead to a remote denial of service of a critical system process with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-64380202.

RubyGems version Ruby 2.2 series: 2.2.9 and earlier, Ruby 2.3 series: 2.3.6 and earlier, Ruby 2.4 series: 2.4.3 and earlier, Ruby 2.5 series: 2.5.0 and earlier, prior to trunk revision 62422 contains a infinite loop caused by negative size vulnerability in ruby gem package tar header that can result in a negative size could cause an infinite loop.. This vulnerability appears to have been fixed in 2.7.6.

There is an infinite loop in the jpc_dec_tileinit function in jpc/jpc_dec.c of Jasper 2.0.13. It will lead to a remote denial of service attack.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the Bazaar dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-bzr.c by ensuring that backwards parsing cannot occur.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the DICOM dissector has an infinite loop. This was addressed in epan/dissectors/packet-dcm.c by validating a length value.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the DNS dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-dns.c by trying to detect self-referencing pointers.

In Wireshark 2.2.0 to 2.2.6 and 2.0.0 to 2.0.12, the SoulSeek dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-slsk.c by making loop bounds more explicit.

The ASN.1 parser in strongSwan before 5.5.3 improperly handles CHOICE types when the x509 plugin is enabled, which allows remote attackers to cause a denial of service (infinite loop) via a crafted certificate.

A memory exhaustion vulnerability exists in Asterisk Open Source 13.x before 13.15.1 and 14.x before 14.4.1 and Certified Asterisk 13.13 before 13.13-cert4, which can be triggered by sending specially crafted SCCP packets causing an infinite loop and leading to memory exhaustion (by message logging in that loop).

In Wireshark 2.2.0 to 2.2.5 and 2.0.0 to 2.0.11, the SIGCOMP dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-sigcomp.c by correcting a memory-size check.

In Wireshark 2.2.0 to 2.2.5 and 2.0.0 to 2.0.11, the WSP dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-wsp.c by adding a length check.

In ImageMagick 7.0.4-9, an infinite loop can occur because of a floating-point rounding error in some of the color algorithms. This affects ModulateHSL, ModulateHCL, ModulateHCLp, ModulateHSB, ModulateHSI, ModulateHSV, ModulateHWB, ModulateLCHab, and ModulateLCHuv.

Incorrect interaction of the parse_packet() and parse_part_sign_sha256() functions in network.c in collectd 5.7.1 and earlier allows remote attackers to cause a denial of service (infinite loop) of a collectd instance (configured with "SecurityLevel None" and with empty "AuthFile" options) via a crafted UDP packet.

In Wireshark 2.2.0 to 2.2.5 and 2.0.0 to 2.0.11, the BGP dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-bgp.c by using a different integer data type.

crypto/ahash.c in the Linux kernel through 4.10.9 allows attackers to cause a denial of service (API operation calling its own callback, and infinite recursion) by triggering EBUSY on a full queue.

In Wireshark 2.2.0 to 2.2.5, the DOF dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-dof.c by using a different integer data type and adjusting a return value.

In Wireshark 2.2.0 to 2.2.4 and 2.0.0 to 2.0.10, there is an IAX2 infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-iax2.c by constraining packet lateness.

The tcp_splice_read function in net/ipv4/tcp.c in the Linux kernel before 4.9.11 allows remote attackers to cause a denial of service (infinite loop and soft lockup) via vectors involving a TCP packet with the URG flag.

In Wireshark 2.2.0 to 2.2.4 and 2.0.0 to 2.0.10, there is a Netscaler file parser infinite loop, triggered by a malformed capture file. This was addressed in wiretap/netscaler.c by changing the restrictions on file size.

In Wireshark 2.2.0 to 2.2.4 and 2.0.0 to 2.0.10, there is an RTMPT dissector infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-rtmpt.c by properly incrementing a certain sequence value.

In Wireshark 2.2.0 to 2.2.4 and 2.0.0 to 2.0.10, there is a NetScaler file parser infinite loop, triggered by a malformed capture file. This was addressed in wiretap/netscaler.c by validating record sizes.

It was found that when Keycloak before 2.5.5 receives a Logout request with a Extensions in the middle of the request, the SAMLSloRequestParser.parse() method ends in a infinite loop. An attacker could use this flaw to conduct denial of service attacks.

It was found in Undertow before 1.3.28 that with non-clean TCP close, the Websocket server gets into infinite loop on every IO thread, effectively causing DoS.

An infinite loop programming error exists in the DNS server functionality of Cesanta Mongoose 6.8 library. A specially crafted DNS request can cause an infinite loop resulting in high CPU usage and Denial Of Service. An attacker can send a packet over the network to trigger this vulnerability.

In Pylons Colander through 1.6, the URL validator allows an attacker to potentially cause an infinite loop thereby causing a denial of service via an unclosed parenthesis.

The receive_msg function in receive.c in the SMTP daemon in Exim 4.88 and 4.89 allows remote attackers to cause a denial of service (infinite loop and stack exhaustion) via vectors involving BDAT commands and an improper check for a '.' character signifying the end of the content, related to the bdat_getc function.

parser.c in libxml2 before 2.9.5 does not prevent infinite recursion in parameter entities.

In GNU Libextractor 1.4, there is an integer signedness error for the chunk size in the EXTRACTOR_nsfe_extract_method function in plugins/nsfe_extractor.c, leading to an infinite loop for a crafted size.

In Poppler 0.59.0, memory corruption occurs in a call to Object::streamGetChar in Object.h after a repeating series of Gfx::display, Gfx::go, Gfx::execOp, Gfx::opShowText, and Gfx::doShowText calls (aka a Gfx.cc infinite loop).

The RESP parser in tcpdump before 4.9.2 could enter an infinite loop due to a bug in print-resp.c:resp_get_length().

The DNS parser in tcpdump before 4.9.2 could enter an infinite loop due to a bug in print-domain.c:ns_print().

There is an infinite loop in the next_char function in comp_scan.c in ncurses 6.0, related to libtic. A crafted input will lead to a remote denial of service attack.

An infinite loop in the function httpRpmPass of TP-Link TL-WR741N/TL-WR742N V1/V2/V3_130415 allows attackers to cause a Denial of Service (DoS) via a crafted packet.

In Wireshark 2.4.0, 2.2.0 to 2.2.8, and 2.0.0 to 2.0.14, the MSDP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-msdp.c by adding length validation.

In the ihevcd_parse_sps function of ihevcd_parse_headers.c, several parameter values could be negative which could lead to negative indexes which could lead to an infinite loop. This could lead to a remote denial of service of a critical system process with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-65398821.

Xerox VersaLink devices on specific versions of firmware before 2022-01-26 allow remote attackers to brick the device via a crafted TIFF file in an unauthenticated HTTP POST request. There is a permanent denial of service because image parsing causes a reboot, but image parsing is restarted as soon as the boot process finishes. However, this boot loop can be resolved by a field technician. The TIFF file must have an incomplete Image Directory. Affected firmware versions include xx.42.01 and xx.50.61. NOTE: the 2022-01-24 NeoSmart article included "believed to affect all previous and later versions as of the date of this posting" but a 2022-01-26 vendor statement reports "the latest versions of firmware are not vulnerable to this issue."

A denial of service vulnerability exists in the parseNormalModeParameters functionality of MZ Automation GmbH libiec61850 1.5.0. A specially-crafted series of network requests can lead to denial of service. An attacker can send a sequence of malformed iec61850 messages to trigger this vulnerability.

Infinite loop in RTMPT protocol dissector in Wireshark 3.6.0 to 3.6.1 and 3.4.0 to 3.4.11 allows denial of service via packet injection or crafted capture file

The LLDP parser in tcpdump before 4.9.2 could enter an infinite loop due to a bug in print-lldp.c:lldp_private_8021_print().

The ISAKMP parser in tcpdump before 4.9.2 could enter an infinite loop due to bugs in print-isakmp.c, several functions.

Apache POI in versions prior to release 3.17 are vulnerable to Denial of Service Attacks: 1) Infinite Loops while parsing crafted WMF, EMF, MSG and macros (POI bugs 61338 and 61294), and 2) Out of Memory Exceptions while parsing crafted DOC, PPT and XLS (POI bugs 52372 and 61295).

In ihevcd_decode.c there is a possible infinite loop due to bytes for an sps of unsupported resolution resulting in the same sps being fed in over and over. This could lead to a remote denial of service of a critical system process with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-65718319.

The numpy.pad function in Numpy 1.13.1 and older versions is missing input validation. An empty list or ndarray will stick into an infinite loop, which can allow attackers to cause a DoS attack.