ProFTPD before 1.3.6b and 1.3.7rc before 1.3.7rc2 allows remote unauthenticated denial-of-service due to incorrect handling of overly long commands because main.c in a child process enters an infinite loop.

An issue was discovered in GitLab Community and Enterprise Edition 11 through 12.4 when building Nested GraphQL queries. It has a large or infinite loop.

In Wireshark 3.0.0 to 3.0.3 and 2.6.0 to 2.6.10, the Gryphon dissector could go into an infinite loop. This was addressed in plugins/epan/gryphon/packet-gryphon.c by checking for a message length of zero.

An issue was discovered in the Linux kernel before 5.0.4. The 9p filesystem did not protect i_size_write() properly, which causes an i_size_read() infinite loop and denial of service on SMP systems.

A flaw was found in the way HAProxy processed HTTP responses containing the "Set-Cookie2" header. This flaw could allow an attacker to send crafted HTTP response packets which lead to an infinite loop, eventually resulting in a denial of service condition. The highest threat from this vulnerability is availability.

Infinite loop in RTMPT protocol dissector in Wireshark 3.6.0 to 3.6.1 and 3.4.0 to 3.4.11 allows denial of service via packet injection or crafted capture file

BT SDP dissector infinite loop in Wireshark 4.0.0 to 4.0.7 and 3.6.0 to 3.6.15 allows denial of service via packet injection or crafted capture file

An Improperly Implemented Security Check for Standard vulnerability in storm control of Juniper Networks Junos OS QFX5k devices allows packets to be punted to ARP queue causing a l2 loop resulting in a DDOS violations and DDOS syslog. This issue is triggered when Storm control is enabled and ICMPv6 packets are present on device. This issue affects Juniper Networks: Junos OS * All versions prior to 20.2R3-S6 on QFX5k; * 20.3 versions prior to 20.3R3-S5 on QFX5k; * 20.4 versions prior to 20.4R3-S5 on QFX5k; * 21.1 versions prior to 21.1R3-S4 on QFX5k; * 21.2 versions prior to 21.2R3-S3 on QFX5k; * 21.3 versions prior to 21.3R3-S2 on QFX5k; * 21.4 versions prior to 21.4R3 on QFX5k; * 22.1 versions prior to 22.1R3 on QFX5k; * 22.2 versions prior to 22.2R2 on QFX5k.

The RemoteAddr and LocalAddr methods on the returned net.Conn may call themselves, leading to an infinite loop which will crash the program due to a stack overflow.

Transient DOS while parsing IPv6 extension header when WLAN firmware receives an IPv6 packet that contains `IPPROTO_NONE` as the next header.

Certain WithSecure products allow an infinite loop in a scanning engine via unspecified file types. This affects WithSecure Client Security 15, WithSecure Server Security 15, WithSecure Email and Server Security 15, WithSecure Elements Endpoint Protection 17 and later, WithSecure Client Security for Mac 15, WithSecure Elements Endpoint Protection for Mac 17 and later, Linux Security 64 12.0 , Linux Protection 12.0, and WithSecure Atlant (formerly F-Secure Atlant) 1.0.35-1.

Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Sierra Wireless, Inc ALEOS could potentially allow a remote attacker to trigger a Denial of Service (DoS) condition for ACEManager without impairing other router functions. This condition is cleared by restarting the device.

Pion DTLS is a Go implementation of Datagram Transport Layer Security. Prior to version 2.1.4, an attacker can send packets that sends Pion DTLS into an infinite loop when processing. Version 2.1.4 contains a patch for this issue. There are currently no known workarounds available.

An infinite loop in OPC UA .NET Standard Stack 1.04.368 allows a remote attackers to cause the application to hang via a crafted message.

A Denial-of-Service (DoS) vulnerability was discovered in F-Secure & WithSecure products whereby the aegen.dll will go into an infinite loop when unpacking PE files. This eventually leads to scanning engine crash. The exploit can be triggered remotely by an attacker.

Go before 1.13.15 and 14.x before 1.14.7 can have an infinite read loop in ReadUvarint and ReadVarint in encoding/binary via invalid inputs.

An issue was discovered in picoTCP 1.7.0. The routine for processing the next header field (and deducing whether the IPv6 extension headers are valid) doesn't check whether the header extension length field would overflow. Therefore, if it wraps around to zero, iterating through the extension headers will not increment the current data pointer. This leads to an infinite loop and Denial-of-Service in pico_ipv6_check_headers_sequence() in pico_ipv6.c.

In Wireshark 3.2.0 to 3.2.4, the GVCP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-gvcp.c by ensuring that an offset increases in all situations.

Trustwave ModSecurity 3.x through 3.0.4 allows denial of service via a special request. NOTE: The discoverer reports "Trustwave has signaled they are disputing our claims." The CVE suggests that there is a security issue with how ModSecurity handles regular expressions that can result in a Denial of Service condition. The vendor does not consider this as a security issue because1) there is no default configuration issue here. An attacker would need to know that a rule using a potentially problematic regular expression was in place, 2) the attacker would need to know the basic nature of the regular expression itself to exploit any resource issues. It's well known that regular expression usage can be taxing on system resources regardless of the use case. It is up to the administrator to decide on when it is appropriate to trade resources for potential security benefit

Denial of service in modem due to infinite loop while parsing IGMPv2 packet from server in Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Voice & Music

An issue was discovered in MultiPartParser in Django 2.2 before 2.2.27, 3.2 before 3.2.12, and 4.0 before 4.0.2. Passing certain inputs to multipart forms could result in an infinite loop when parsing files.

Xerox VersaLink devices on specific versions of firmware before 2022-01-26 allow remote attackers to brick the device via a crafted TIFF file in an unauthenticated HTTP POST request. There is a permanent denial of service because image parsing causes a reboot, but image parsing is restarted as soon as the boot process finishes. However, this boot loop can be resolved by a field technician. The TIFF file must have an incomplete Image Directory. Affected firmware versions include xx.42.01 and xx.50.61. NOTE: the 2022-01-24 NeoSmart article included "believed to affect all previous and later versions as of the date of this posting" but a 2022-01-26 vendor statement reports "the latest versions of firmware are not vulnerable to this issue."

Junrar is an open source java RAR archive library. In affected versions A carefully crafted RAR archive can trigger an infinite loop while extracting said archive. The impact depends solely on how the application uses the library, and whether files can be provided by malignant users. The problem is patched in 7.4.1. There are no known workarounds and users are advised to upgrade as soon as possible.

An issue was discovered in the DNS proxy in Connman through 1.40. The TCP server reply implementation has an infinite loop if no data is received.

An issue was discovered in LibVNCServer before 0.9.13. An improperly closed TCP connection causes an infinite loop in libvncclient/sockets.c.

An issue was discovered in Mattermost Server before 5.23.0. Automatic direct message replies allow attackers to cause a denial of service (infinite loop), aka MMSA-2020-0020.

An issue was discovered in Mattermost Server before 5.23.0. Large webhook requests allow attackers to cause a denial of service (infinite loop), aka MMSA-2020-0021.

An issue was discovered in Foxit Reader and PhantomPDF before 9.7.2. It has circular reference mishandling that causes a loop.

The payload length in a WebSocket frame was not correctly validated in Apache Tomcat 10.0.0-M1 to 10.0.0-M6, 9.0.0.M1 to 9.0.36, 8.5.0 to 8.5.56 and 7.0.27 to 7.0.104. Invalid payload lengths could trigger an infinite loop. Multiple requests with invalid payload lengths could lead to a denial of service.

An issue was discovered in Contiki through 3.0. An infinite loop exists in the uIP TCP/IP stack component when processing IPv6 extension headers in ext_hdr_options_process in net/ipv6/uip6.c.

An infinite loop in the function httpRpmPass of TP-Link TL-WR741N/TL-WR742N V1/V2/V3_130415 allows attackers to cause a Denial of Service (DoS) via a crafted packet.

The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients consuming server certificates - TLS servers consuming client certificates - Hosting providers taking certificates or private keys from customers - Certificate authorities parsing certification requests from subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate which makes it slightly harder to trigger the infinite loop. However any operation which requires the public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-signed certificate to trigger the loop during verification of the certificate signature. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the 15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected 1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc).

In libtirpc before 1.3.3rc1, remote attackers could exhaust the file descriptors of a process that uses libtirpc because idle TCP connections are mishandled. This can, in turn, lead to an svc_run infinite loop without accepting new connections.

A denial-of-service issue in the dns implemenation could cause an infinite loop.

TinyXML through 2.6.2 has an infinite loop in TiXmlParsingData::Stamp in tinyxmlparser.cpp via the TIXML_UTF_LEAD_0 case. It can be triggered by a crafted XML message and leads to a denial of service.

Infinite loop in the BitTorrent DHT dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file

Infinite loop in the RTMPT dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file

Crash in the RFC 7468 dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file

Apache Tomcat 8.5.0 to 8.5.63, 9.0.0-M1 to 9.0.43 and 10.0.0-M1 to 10.0.2 did not properly validate incoming TLS packets. When Tomcat was configured to use NIO+OpenSSL or NIO2+OpenSSL for TLS, a specially crafted packet could be used to trigger an infinite loop resulting in a denial of service.

The rencode package through 1.0.6 for Python allows an infinite loop in typecode decoding (such as via ;\x2f\x7f), enabling a remote attack that consumes CPU and memory.

In Contiki 3.0, a Telnet server that silently quits (before disconnection with clients) leads to connected clients entering an infinite loop and waiting forever, which may cause excessive CPU consumption.

jsoup is a Java library for working with HTML. Those using jsoup versions prior to 1.14.2 to parse untrusted HTML or XML may be vulnerable to DOS attacks. If the parser is run on user supplied input, an attacker may supply content that causes the parser to get stuck (loop indefinitely until cancelled), to complete more slowly than usual, or to throw an unexpected exception. This effect may support a denial of service attack. The issue is patched in version 1.14.2. There are a few available workarounds. Users may rate limit input parsing, limit the size of inputs based on system resources, and/or implement thread watchdogs to cap and timeout parse runtimes.

In Contiki 3.0, potential nonterminating acknowledgment loops exist in the Telnet service. When the negotiated options are already disabled, servers still respond to DONT and WONT requests with WONT or DONT commands, which may lead to infinite acknowledgment loops, denial of service, and excessive CPU consumption.

The HTTP/2 header parser in Apache Tomcat 9.0.0.M1 to 9.0.0.M11 and 8.5.0 to 8.5.6 entered an infinite loop if a header was received that was larger than the available buffer. This made a denial of service attack possible.

An issue has been discovered in GitLab CE/EE affecting all versions from 17.7 before 17.10.8, 17.11 before 17.11.4, and 18.0 before 18.0.2, allow an attacker to trigger an infinite redirect loop, potentially leading to a denial of service condition.

The sequoia-openpgp crate 1.13.0 before 1.21.0 for Rust allows an infinite loop of "Reading a cert: Invalid operation: Not a Key packet" messages for RawCertParser operations that encounter an unsupported primary key type.