handle_daylightsaving.php in NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.0.0 through 3.0.0, NUUO Crystal 2.2.1 through 3.2.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to execute arbitrary PHP code via the NTPServer parameter.

__debugging_center_utils___.php in NUUO NVRmini 2 1.7.5 through 3.0.0, NUUO NVRsolo 1.7.5 through 3.0.0, and NETGEAR ReadyNAS Surveillance 1.1.1 through 1.4.1 allows remote attackers to execute arbitrary PHP code via the log parameter.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an unauthenticated attacker. This affects WAC505 before 5.0.5.4, WAC510 before 5.0.5.4, WAC120 before 2.1.7, WN604 before 3.3.10, WNAP320 before 3.7.11.4, WNAP210v2 before 3.7.11.4, WNDAP350 before 3.7.11.4, WNDAP360 before 3.7.11.4, WNDAP660 before 3.7.11.4, WNDAP620 before 2.1.7, and WND930 before 2.1.5.

(1) boardData102.php, (2) boardData103.php, (3) boardDataJP.php, (4) boardDataNA.php, and (5) boardDataWW.php in Netgear WN604 before 3.3.3 and WN802Tv2, WNAP210v2, WNAP320, WNDAP350, WNDAP360, and WNDAP660 before 3.5.5.0 allow remote attackers to execute arbitrary commands.

NETGEAR JNR1010 devices before 1.0.0.32 have Incorrect Access Control because the ok value of the auth cookie is a special case.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_wps_gen_pincode function.

NETGEAR RAX5 (AX1600 WiFi Router) v1.0.2.26 was discovered to contain a command injection vulnerability via the iface parameter in the vif_disable function.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pin_wps function.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_cancel_wps function.

In Netgear WNR854T 1.5.2 (North America), the UPNP service is vulnerable to command injection in the function addmap_exec which parses the NewInternalClient parameter of the AddPortMapping SOAPAction into a system call without sanitation. An attacker can send a specially crafted SOAPAction request for AddPortMapping via the router's WANIPConn1 service to achieve arbitrary command execution.

Netgear WNR854T 1.5.2 (North America) contains a stack-based buffer overflow vulnerability in the SetDefaultConnectionService function due to an unconstrained use of sscanf. The vulnerability allows for control of the program counter and can be utilized to achieve arbitrary code execution.

In Netgear WNR854T 1.5.2 (North America), the UPNP service (/usr/sbin/upnp) is vulnerable to stack-based buffer overflow in the M-SEARCH Host header.

NETGEAR Arlo base stations with firmware 1.7.5_6178 and earlier, Arlo Q devices with firmware 1.8.0_5551 and earlier, and Arlo Q Plus devices with firmware 1.8.1_6094 and earlier have a default password of 12345678, which makes it easier for remote attackers to obtain access after a factory reset or in a factory configuration.

Netgear Inc WNR854T 1.5.2 (North America) contains a stack-based buffer overflow vulnerability in the parse_st_header function due to use of a request header parameter in a strncpy where size is determined based on the input specified. By sending a specially crafted packet, an attacker can take control of the program counter and hijack control flow of the program to execute arbitrary system commands.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter get_email. After which, they can visit the send_log.cgi endpoint which uses the parameter in a system call to achieve command execution.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter wan_hostname and forcing a reboot. This will result in command injection.

The NETGEAR WNR2000v5 router contains a buffer overflow in the hidden_lang_avi parameter when invoking the URL /apply.cgi?/lang_check.html. This buffer overflow can be exploited by an unauthenticated attacker to achieve remote code execution.

In Netgear Orbi RBR750 firmware before V7.2.6.21, there is a stack-based buffer overflow in /usr/sbin/httpd.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass via the NtgrBak key.

netgear R6250 Firmware Version 1.0.4.48 is vulnerable to Buffer Overflow after authentication.

NETGEAR Nighthawk WiFi6 Router prior to V1.0.10.94 contains a format string vulnerability in a SOAP service that could allow an attacker to execute arbitrary code on the device.

Netgear R7100LG 1.0.0.78 was discovered to contain a command injection vulnerability via the password parameter at usb_remote_invite.cgi.

NETGEAR ProSAFE Network Management System MyHandlerInterceptor Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of NETGEAR ProSAFE Network Management System. Authentication is not required to exploit this vulnerability. The specific flaw exists within the MyHandlerInterceptor class. The issue results from improper implementation of the authentication mechanism. An attacker can leverage this vulnerability to bypass authentication on the system. . Was ZDI-CAN-19718.

Buffer Overflow vulnerability in NETGEAR R6400v2 before version 1.0.4.118, allows remote unauthenticated attackers to execute arbitrary code via crafted URL to httpd.

A vulnerability has been found in Netgear WNDR3700v2 1.0.1.14 and classified as critical. This vulnerability affects unknown code of the component Web Interface. The manipulation leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-221152.

There is a command injection vulnerability in the Netgear R6250 router with Firmware Version 1.0.4.48. If an attacker gains web management privileges, they can inject commands into the post request parameters, thereby gaining shell privileges.

Buffer Overflow vulnerability found in Netgear R6900 v.1.0.2.26, R6700v3 v.1.0.4.128, R6700 v.1.0.0.26 allows a remote attacker to execute arbitrary code and cause a denial ofservice via the getInputData parameter of the fwSchedule.cgi page.

Buffer Overflow vulnerability in Netgear- R61 router V1.0.1.28 allows a remote attacker to execute arbitrary code via the QUERY_STRING key value

NETGEAR Nighthawk WiFi6 Router prior to V1.0.10.94 contains a buffer overflow vulnerability in various CGI mechanisms that could allow an attacker to execute arbitrary code on the device.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the devname parameter in the reset_wifi function.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the iface parameter in the vif_enable function.

NETGEAR RAX5 (AX1600 WiFi Router) V1.0.2.26 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pbc_wps function.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Command Injection. An attacker can send a specially crafted request to post.cgi, updating the nvram parameter pppoe_peer_mac and forcing a reboot. This will result in command injection.

Netgear WNR854T 1.5.2 (North America) is vulnerable to Arbitrary command execution in cmd.cgi which allows for the execution of system commands via the web interface.

NETGEAR MR1100 devices before 12.06.08.00 are affected by lack of access control at the function level.

Netgear RAX30 (AX2400), prior to version 1.0.6.74, was affected by an authentication bypass vulnerability, allowing an unauthenticated attacker to gain administrative access to the device's web management interface by resetting the admin password.

Symlink Traversal vulnerability in NETGEAR WNR3500U and WNR3500L due to misconfiguration in the SMB service.

An Authentication Bypass vulnerability exists in NETGEAR Centria WNDR4700 Firmware 1.0.0.34 in http://<router_ip>/apply.cgi?/hdd_usr_setup.htm that when visited by any user, authenticated or not, causes the router to no longer require a password to access the web administration portal.

NETGEAR Centria WNDR4700 devices with firmware 1.0.0.34 allow authentication bypass.

Netgear WNR1000v3 with firmware before 1.0.2.60 contains an Authentication Bypass due to the server skipping checks for URLs containing a ".jpg".

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D7800 before 1.0.1.34, R7800 before 1.0.2.46, and R9000 before 1.0.3.16.

Certain NETGEAR devices are affected by a hardcoded password. This affects D3600 before 1.0.0.76 and D6000 before 1.0.0.76.

Eval injection vulnerability in frontview/lib/np_handler.pl in the FrontView web interface in NETGEAR ReadyNAS RAIDiator before 4.1.12 and 4.2.x before 4.2.24 allows remote attackers to execute arbitrary Perl code via a crafted request, related to the "forgot password workflow."

/api/2.0/rest/aggregator/xml in Axentra firmware, used by NETGEAR Stora, Seagate GoFlex Home, and MEDION LifeCloud, has an XXE vulnerability that can be chained with an SSRF bug to gain remote command execution as root. It can be triggered by anyone who knows the IP address of the affected device.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via parameter openvpn_server_ip.

NETGEAR Nighthawk WiFi Mesh systems and routers are affected by a stack-based buffer overflow vulnerability. This affects MR60 before 1.1.7.132, MS60 before 1.1.7.132, R6900P before 1.3.3.154, R7000P before 1.3.3.154, R7960P before 1.4.4.94, and R8000P before 1.4.4.94.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow via wan_dns1_pri.

Netgear R7000P V1.3.0.8 is vulnerable to Buffer Overflow in /usr/sbin/httpd via parameter enable_band_steering.

Netgear R7000P V1.3.0.8, V1.3.1.64 is vulnerable to Buffer Overflow via parameters: stamode_dns1_pri and stamode_dns1_sec.

Netgear R7000P V1.3.1.64 is vulnerable to Buffer Overflow via parameter openvpn_server_ip.