The decodenetnum function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (assertion failure) via a 6 or mode 7 packet containing a long data value.

The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash). NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750.

NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote attackers to cause a denial of service (ntpd crash) via a malformed mode configuration directive.

ntpd in ntp 4.2.8 before 4.2.8p15 and 4.3.x before 4.3.101 allows remote attackers to cause a denial of service (memory consumption) by sending packets, because memory is not freed in situations where a CMAC key is used and associated with a CMAC algorithm in the ntp.keys file.

ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to cause a denial of service (infinite loop or crash) by pointing the key file at the log file.

The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash) via crafted packets containing particular autokey operations. NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750.

An exploitable denial of service vulnerability exists in the origin timestamp check functionality of ntpd 4.2.8p9. A specially crafted unauthenticated network packet can be used to reset the expected origin timestamp for target peers. Legitimate replies from targeted peers will fail the origin timestamp check (TEST2) causing the reply to be dropped and creating a denial of service condition.

The read_mru_list function in NTP before 4.2.8p9 allows remote attackers to cause a denial of service (crash) via a crafted mrulist query.

NTP before 4.2.8p9 allows remote attackers to bypass the origin timestamp protection mechanism via an origin timestamp of zero. NOTE: this vulnerability exists because of a CVE-2015-8138 regression.

NTP before 4.2.8p7 and 4.3.x before 4.3.92 allows remote attackers to cause a denial of service (prevent subsequent authentication) by leveraging knowledge of the controlkey or requestkey and sending a crafted packet to ntpd, which changes the value of trustedkey, controlkey, or requestkey. NOTE: this vulnerability exists because of a CVE-2016-2516 regression.

NTP before 4.2.8p7 and 4.3.x before 4.3.92, when mode7 is enabled, allows remote attackers to cause a denial of service (ntpd abort) by using the same IP address multiple times in an unconfig directive.

An off-path attacker can cause a preemptible client association to be demobilized in NTP 4.2.8p4 and earlier and NTPSec a5fb34b9cc89b92a8fef2f459004865c93bb7f92 by sending a crypto NAK packet to a victim client with a spoofed source address of an existing associated peer. This is true even if authentication is enabled.

NTP before 4.2.8p6 and 4.3.x before 4.3.90 allows remote attackers to bypass the origin timestamp validation via a packet with an origin timestamp set to zero.

The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash). NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750.

The ntpd client in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service via a number of crafted "KOD" messages.

The rate limiting feature in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to have unspecified impact via a large number of crafted requests.

The "pidfile" or "driftfile" directives in NTP ntpd 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77, when ntpd is configured to allow remote configuration, allows remote attackers with an IP address that is allowed to send configuration requests, and with knowledge of the remote configuration password to write to arbitrary files via the :config command.

ntpd in ntp before 4.2.8p3 with remote configuration enabled allows remote authenticated users with knowledge of the configuration password and access to a computer entrusted to perform remote configuration to cause a denial of service (service crash) via a NULL byte in a crafted configuration directive packet.

The log_config_command function in ntp_parser.y in ntpd in NTP before 4.2.7p42 allows remote attackers to cause a denial of service (ntpd crash) via crafted logconfig commands.

ntp_openssl.m4 in ntpd in NTP before 4.2.7p112 allows remote attackers to cause a denial of service (segmentation fault) via a crafted statistics or filegen configuration command that is not enabled during compilation.

The read_network_packet function in ntp_io.c in ntpd in NTP 4.x before 4.2.8p1 on Linux and OS X does not properly determine whether a source IP address is an IPv6 loopback address, which makes it easier for remote attackers to spoof restricted packets, and read or write to the runtime state, by leveraging the ability to reach the ntpd machine's network interface with a packet from the ::1 address.

ntp_crypto.c in ntpd in NTP 4.x before 4.2.8p1, when Autokey Authentication is enabled, allows remote attackers to obtain sensitive information from process memory or cause a denial of service (daemon crash) via a packet containing an extension field with an invalid value for the length of its value field.

The monlist feature in ntp_request.c in ntpd in NTP before 4.2.7p26 allows remote attackers to cause a denial of service (traffic amplification) via forged (1) REQ_MON_GETLIST or (2) REQ_MON_GETLIST_1 requests, as exploited in the wild in December 2013.

ntpd in ntp 4.2.8p10, 4.2.8p11, 4.2.8p12 and 4.2.8p13 allow remote attackers to prevent a broadcast client from synchronizing its clock with a broadcast NTP server via soofed mode 3 and mode 5 packets. The attacker must either be a part of the same broadcast network or control a slave in that broadcast network that can capture certain required packets on the attacker's behalf and send them to the attacker.

ntpq in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash) via crafted mode 6 response packets.

Xerver 4.32 allows remote authenticated users to cause a denial of service (daemon crash) via a non-numeric web port assignment in the management interface. NOTE: this can be leveraged by non-authenticated attackers using CVE-2009-4657.

DataWizard Technologies FtpXQ FTP Server 3.0 allows remote authenticated users to cause a denial of service (crash) via a long ABOR command.

An improper input validation before calling java readLine() method may impact IBM Curam Social Program Management 7.0.9 and 7.0.10, which could result in a denial of service. IBM X-Force ID: 189159.

The policy definition evaluator in Condor before 7.4.2 does not properly handle attributes in a WANT_SUSPEND policy that evaluate to an UNDEFINED state, which allows remote authenticated users to cause a denial of service (condor_startd exit) via a crafted job.

The IMAP server in Softalk Mail Server (formerly WorkgroupMail) 8.5.1.431 allows remote authenticated users to cause a denial of service (resource consumption and daemon crash) via a long IMAP APPEND command with certain repeated parameters.

Serv-U 7.0.0.1 through 7.3, including 7.2.0.1, allows remote authenticated users to cause a denial of service (CPU consumption) via a crafted stou command, probably related to MS-DOS device names, as demonstrated using "con:1".

NWFTPD.nlm before 5.03b in the FTP server in Novell NetWare allows remote authenticated users to cause a denial of service (abend) via a crafted ABOR command.

lib/rfc1035.c in Squid 2.x, 3.0 through 3.0.STABLE22, and 3.1 through 3.1.0.15 allows remote attackers to cause a denial of service (assertion failure) via a crafted DNS packet that only contains a header.

A DOS vulnerability exists in Gitlab CE/EE >=10.3, <13.4.7,>=13.5, <13.5.5,>=13.6, <13.6.2 that allows an attacker to trigger uncontrolled resource by bypassing input validation in markdown fields.

A flaw was found in the way Ceph Object Gateway would process cross-origin HTTP requests if the CORS policy was set to allow origin on a bucket. A remote unauthenticated attacker could use this flaw to cause denial of service by sending a specially-crafted cross-origin HTTP request. Ceph branches 1.3.x and 2.x are affected.

Huawei AnyOffice V200R006C00 could allow an authenticated, remote attacker to cause the software to deny services by uploading an XML bomb.

IBM WebSphere MQ 8.0 could allow an authenticated user with authority to create a cluster object to cause a denial of service to MQ clustering. IBM Reference #: 1998647.

Huawei USG9520, USG9560, and USG9580 unified security gateways with software before V300R001C01SPCa00 allow remote authenticated users to cause a denial of service (device restart) via an unspecified command parameter.

A flaw was found in Red Hat Ceph before 0.94.9-8. The way Ceph Object Gateway handles POST object requests permits an authenticated attacker to launch a denial of service attack by sending null or specially crafted POST object requests.

A vulnerability was found in Openstack Glance. No limits are enforced within the Glance image service for both v1 and v2 `/images` API POST method for authenticated users, resulting in possible denial of service attacks through database table saturation.

An issue was discovered in phpMyAdmin. An authorized user can cause a denial-of-service (DoS) attack on a server by passing large values to a loop. All 4.6.x versions (prior to 4.6.4), 4.4.x versions (prior to 4.4.15.8), and 4.0.x versions (prior to 4.0.10.17) are affected.

A Denial of Service vulnerability exists in the ITMS workflow process manager login window in Symantec IT Management Suite 8.0.