A vulnerability in the Bulk Administration Tool (BAT) for Cisco Unity Connection could allow an authenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software does not restrict the maximum size of certain files that can be written to disk. An attacker who has valid administrator credentials for an affected system could exploit this vulnerability by sending a crafted, remote connection request to an affected system. A successful exploit could allow the attacker to write a file that consumes most of the available disk space on the system, causing application functions to operate abnormally and leading to a DoS condition.

Memory leak in the Cisco Tunneling Control Protocol (cTCP) encapsulation feature in Cisco IOS 12.4, when an Easy VPN (aka EZVPN) server is enabled, allows remote attackers to cause a denial of service (memory consumption and device crash) via a sequence of TCP packets.

A vulnerability in the Open Shortest Path First (OSPF) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper memory protection mechanisms while processing certain OSPF packets. An attacker could exploit this vulnerability by sending a series of malformed OSPF packets in a short period of time to an affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition for client traffic that is traversing the device.

A vulnerability in the Layer 2 punt code of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a queue wedge on an interface that receives specific Layer 2 frames, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of certain Layer 2 frames. An attacker could exploit this vulnerability by sending specific Layer 2 frames on the segment the router is connected to. A successful exploit could allow the attacker to cause a queue wedge on the interface, resulting in a DoS condition.

A vulnerability in CLI management in Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system as the root user. This vulnerability is due to the way the software handles concurrent CLI sessions. An attacker could exploit this vulnerability by authenticating to the device as an administrative user and executing a sequence of commands. A successful exploit could allow the attacker to obtain access to the underlying operating system as the root user.

Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the MPLS Operation, Administration, and Maintenance (OAM) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper input validation when an affected device is processing an MPLS echo-request or echo-reply packet. An attacker could exploit this vulnerability by sending malicious MPLS echo-request or echo-reply packets to an interface that is enabled for MPLS forwarding on the affected device. A successful exploit could allow the attacker to cause the MPLS OAM process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition.

A vulnerability in the ingress traffic manager of Cisco IOS XE Software for Cisco Network Convergence System (NCS) 520 Routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition in the web management interface of an affected device. This vulnerability is due to incorrect processing of certain IPv4 TCP traffic that is destined to an affected device. An attacker could exploit this vulnerability by sending a large number of crafted TCP packets to the affected device. A successful exploit could allow the attacker to cause the web management interface to become unavailable, resulting in a DoS condition. Note: This vulnerability does not impact traffic that is going through the device or going to the Management Ethernet interface of the device.

A vulnerability in the Rate Limiting Network Address Translation (NAT) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization in the Cisco QuantumFlow Processor of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to mishandling of the rate limiting feature within the QuantumFlow Processor. An attacker could exploit this vulnerability by sending large amounts of traffic that would be subject to NAT and rate limiting through an affected device. A successful exploit could allow the attacker to cause the QuantumFlow Processor utilization to reach 100 percent on the affected device, resulting in a DoS condition.

Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for Mac, and Cisco Jabber for mobile platforms could allow an attacker to access sensitive information or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Ethernet over GRE (EoGRE) packet processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9800 Family Wireless Controller, Embedded Wireless Controller, and Embedded Wireless on Catalyst 9000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper processing of malformed EoGRE packets. An attacker could exploit this vulnerability by sending malicious packets to the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Multiple vulnerabilities in Cisco Jabber for Windows, Cisco Jabber for Mac, and Cisco Jabber for mobile platforms could allow an attacker to access sensitive information or cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Simple Network Management Protocol (SNMP) punt handling function of Cisco cBR-8 Converged Broadband Routers could allow an authenticated, remote attacker to overload a device punt path, resulting in a denial of service (DoS) condition. This vulnerability is due to the punt path being overwhelmed by large quantities of SNMP requests. An attacker could exploit this vulnerability by sending a large number of SNMP requests to an affected device. A successful exploit could allow the attacker to overload the device punt path, resulting in a DoS condition.

A vulnerability in Address Resolution Protocol (ARP) management of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to prevent an affected device from resolving ARP entries for legitimate hosts on the connected subnets. This vulnerability exists because ARP entries are mismanaged. An attacker could exploit this vulnerability by continuously sending traffic that results in incomplete ARP entries. A successful exploit could allow the attacker to cause ARP requests on the device to be unsuccessful for legitimate hosts, resulting in a denial of service (DoS) condition.

Multiple vulnerabilities exist in the Cisco Webex Network Recording Player for Advanced Recording Format (ARF) and Webex Recording Format (WRF) files. An attacker could exploit these vulnerabilities by providing a user with a malicious .arf or .wrf file via email or URL and convincing the user to launch the file in the Webex recording players. Exploitation of these vulnerabilities could cause an affected player to crash, resulting in a denial of service (DoS) condition. The Cisco Webex players are applications that are used to play back Webex meetings that have been recorded by an online meeting attendee. The Webex Network Recording Player for .arf files can be automatically installed when the user accesses a recording that is hosted on a Webex server. The Webex Player for .wrf files can be downloaded manually. These vulnerabilities affect ARF and WRF recording players available from Cisco Webex Meetings Suite sites, Cisco Webex Meetings Online sites, and Cisco Webex Meetings Server. Cisco Bug IDs: CSCvh70253, CSCvh70268, CSCvh72272, CSCvh72281, CSCvh72285, CSCvi60477, CSCvi60485, CSCvi60490, CSCvi60520, CSCvi60529, CSCvi60533.

A vulnerability in the Open Shortest Path First version 3 (OSPFv3) implementation in Cisco IOS and IOS XE Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. The vulnerability is due to incorrect handling of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending crafted OSPFv3 Link-State Advertisements (LSA) to an affected device. An exploit could allow the attacker to cause an affected device to reload, leading to a denial of service (DoS) condition.

A vulnerability in the errdisable per VLAN feature of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause the device to crash, leading to a denial of service (DoS) condition. The vulnerability is due to a race condition that occurs when the VLAN and port enter an errdisabled state, resulting in an incorrect state in the software. An attacker could exploit this vulnerability by sending frames that trigger the errdisable condition. A successful exploit could allow the attacker to cause the affected device to crash, leading to a DoS condition.

A vulnerability in the Cisco Discovery Protocol (formerly known as CDP) subsystem of devices running, or based on, Cisco NX-OS Software contain a vulnerability that could allow an unauthenticated, adjacent attacker to create a denial of service (DoS) condition. The vulnerability is due to a failure to properly validate certain fields within a Cisco Discovery Protocol message prior to processing it. An attacker with the ability to submit a Cisco Discovery Protocol message designed to trigger the issue could cause a DoS condition on an affected device while the device restarts. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc89242, CSCve40943, CSCve40953, CSCve40965, CSCve40970, CSCve40978, CSCve40992, CSCve41000, CSCve41007.

A vulnerability in one of the diagnostic test CLI commands on Cisco Industrial Ethernet 4010 Series Switches running Cisco IOS Software could allow an authenticated, local attacker to impact the stability of the device. This could result in arbitrary code execution or a denial of service (DoS) condition. The attacker has to have valid user credentials at privilege level 15. The vulnerability is due to a diagnostic test CLI command that allows the attacker to write to the device memory. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a specific diagnostic test command at the CLI. An exploit could allow the attacker to overwrite system memory locations, which could have a negative impact on the stability of the device. Cisco Bug IDs: CSCvf71150.

A vulnerability in the Session Initiation Protocol (SIP) call-handling functionality of Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware could allow an unauthenticated, remote attacker to cause an affected phone to reload unexpectedly, resulting in a temporary denial of service (DoS) condition. The vulnerability exists because the firmware of an affected phone incorrectly handles errors that could occur when an incoming phone call is not answered. An attacker could exploit this vulnerability by sending a set of maliciously crafted SIP packets to an affected phone. A successful exploit could allow the attacker to cause the affected phone to reload unexpectedly, resulting in a temporary DoS condition. This vulnerability affects Cisco IP Phone 6800, 7800, and 8800 Series Phones with Multiplatform Firmware if they are running a Multiplatform Firmware release prior to Release 11.1(2). Cisco Bug IDs: CSCvi24718.

A vulnerability in the XCP Router service of the Cisco Unified Communications Manager IM & Presence Service (CUCM IM&P) and the Cisco TelePresence Video Communication Server (VCS) and Expressway could allow an unauthenticated, remote attacker to cause a temporary service outage for all IM&P users, resulting in a denial of service (DoS) condition. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a malicious IPv4 or IPv6 packet to an affected device on TCP port 7400. An exploit could allow the attacker to overread a buffer, resulting in a crash and restart of the XCP Router service. Cisco Bug IDs: CSCvg97663, CSCvi55947.

A vulnerability in the IP Version 4 (IPv4) fragment reassembly function of Cisco 3500, 5500, and 8500 Series Wireless LAN Controller Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a corruption of an internal data structure process that occurs when the affected software reassembles certain IPv4 packets. An attacker could exploit this vulnerability by sending certain malformed IPv4 fragments to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. This vulnerability affects all releases of 8.4 until the first fixed release for the 5500 and 8500 Series Wireless LAN Controllers and releases 8.5.103.0 and 8.5.105.0 for the 3500, 5500, and 8500 Series Wireless LAN Controllers. Cisco Bug IDs: CSCvf89222.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to obtain sensitive information from memory or cause a denial of service (DoS) condition on the affected product. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overread condition, which could allow the attacker to obtain sensitive information from memory or cause a DoS condition on the affected product. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69957, CSCve02435, CSCve04859, CSCve41536, CSCve41538, CSCve41559.

A vulnerability in the Pong tool of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software attempts to free the same area of memory twice. An attacker could exploit this vulnerability by sending a pong request to an affected device from a location on the network that causes the pong reply packet to egress both a FabricPath port and a non-FabricPath port. An exploit could allow the attacker to cause a dual or quad supervisor virtual port-channel (vPC) to reload. This vulnerability affects the following products when running Cisco NX-OS Software Release 7.2(1)D(1), 7.2(2)D1(1), or 7.2(2)D1(2) with both the Pong and FabricPath features enabled and the FabricPath port is actively monitored via a SPAN session: Cisco Nexus 7000 Series Switches and Cisco Nexus 7700 Series Switches. Cisco Bug IDs: CSCuv98660.

A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause one of the detection engine processes to run out of memory and thus slow down traffic processing. The vulnerability is due to improper handling of traffic when the Secure Sockets Layer (SSL) inspection policy is enabled. An attacker could exploit this vulnerability by sending malicious traffic through an affected device. An exploit could allow the attacker to increase the resource consumption of a single instance of the Snort detection engine on an affected device. This will lead to performance degradation and eventually the restart of the affected Snort process. Cisco Bug IDs: CSCvi09219, CSCvi29845.

A vulnerability in TCP connection management in Cisco Prime Access Registrar could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition when the application unexpectedly restarts. The vulnerability is due to incorrect handling of incoming TCP SYN packets to specific listening ports. The improper handling of the TCP SYN packets could cause a system file description to be allocated and not freed. An attacker could exploit this vulnerability by sending a crafted stream of TCP SYN packets to the application. A successful exploit could allow the attacker to cause the application to eventually restart if a file description cannot be obtained.

A vulnerability in the TCP throttling process of Cisco Prime Network could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection for TCP listening ports. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP SYN packets to the local IP address of the targeted application. A successful exploit could allow the attacker to cause the device to consume a high amount of memory and become slow, or to stop accepting new TCP connections to the application. Cisco Bug IDs: CSCvg48152.

A vulnerability in the implementation of Session Initiation Protocol (SIP) processing in Cisco Small Business SPA514G IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SIP request messages by an affected device. An attacker could exploit this vulnerability by sending crafted SIP messages to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. Cisco has not released software updates that address this vulnerability. This vulnerability affects Cisco Small Business SPA514G IP Phones that are running firmware release 7.6.2SR2 or earlier.

A vulnerability in Cisco IOS XE Software running on Cisco cBR Series Converged Broadband Routers could allow an unauthenticated, adjacent attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect handling of certain DHCP packets. An attacker could exploit this vulnerability by sending certain DHCP packets to a specific segment of an affected device. A successful exploit could allow the attacker to increase CPU usage on the affected device and cause a DoS condition. Cisco Bug IDs: CSCvg73687.

A vulnerability in the Cisco Webex Player for Webex Recording Format (WRF) files could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. An attacker could exploit this vulnerability by sending a user a link or email attachment with a malicious WRF file and persuading the user to open the file in the Cisco Webex Player. A successful exploit could cause the affected player to crash, resulting in a DoS condition. For more information about this vulnerability, see the Details section of this security advisory.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packets when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could cause process crashes and result in a DoS condition on the device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69960, CSCve02463, CSCve04859, CSCve41530, CSCve41537, CSCve41541, CSCve41557.

A vulnerability in the detection engine parsing of Security Socket Layer (SSL) protocol packets for Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the Snort process unexpectedly restarting. The vulnerability is due to improper input handling of the SSL traffic. An attacker could exploit this vulnerability by sending a crafted SSL traffic to the detection engine on the targeted device. An exploit could allow the attacker to cause a DoS condition if the Snort process restarts and traffic inspection is bypassed or traffic is dropped. Cisco Bug IDs: CSCvi36434.

A vulnerability in the Switch Integrated Security Features of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an interface queue wedge. The vulnerability is due to incorrect handling of crafted IPv6 packets. An attacker could exploit this vulnerability by sending crafted IPv6 packets through the device. An exploit could allow the attacker to cause an interface queue wedge. This vulnerability affects the Cisco cBR-8 Converged Broadband Router, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco Cloud Services Router 1000V Series when configured with IPv6. In the field and internal testing, this vulnerability was only observed or reproduced on the Cisco cBR-8 Converged Broadband Router. The Cisco ASR 1000 Series Aggregation Services Routers and Cisco Cloud Services Router 1000V Series contain the same code logic, so affected trains have had the code fix applied; however, on these two products, the vulnerability has not been observed in the field or successfully reproduced internally. Cisco Bug IDs: CSCvd75185.

A vulnerability in the web framework of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a buffer overflow condition on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly parsing malformed HTTP packets that are destined to a device. An attacker could exploit this vulnerability by sending a malformed HTTP packet to an affected device for processing. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, resulting in a DoS condition.

A vulnerability in the Internet Group Management Protocol (IGMP) packet-processing functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust buffers on an affected device, resulting in a denial of service (DoS) condition, aka a Memory Leak. The vulnerability is due to the affected software insufficiently processing IGMP Membership Query packets that are sent to an affected device. An attacker could exploit this vulnerability by sending a large number of IGMP Membership Query packets, which contain certain values, to an affected device. A successful exploit could allow the attacker to exhaust buffers on the affected device, resulting in a DoS condition that requires the device to be reloaded manually. This vulnerability affects: Cisco Catalyst 4500 Switches with Supervisor Engine 8-E, if they are running Cisco IOS XE Software Release 3.x.x.E and IP multicast routing is configured; Cisco devices that are running Cisco IOS XE Software Release 16.x, if IP multicast routing is configured. Cisco Bug IDs: CSCuw09295, CSCve94496.

A vulnerability in the Precision Time Protocol (PTP) subsystem of Cisco IOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of the Precision Time Protocol. The vulnerability is due to insufficient processing of PTP packets. An attacker could exploit this vulnerability by sending a custom PTP packet to, or through, an affected device. A successful exploit could allow the attacker to cause a DoS condition for the PTP subsystem, resulting in time synchronization issues across the network.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to read sensitive memory content, create a denial of service (DoS) condition, or execute arbitrary code as root. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow or buffer overread condition in the Cisco Fabric Services component, which could allow the attacker to read sensitive memory content, create a DoS condition, or execute arbitrary code as root. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69951, CSCve02459, CSCve02461, CSCve02463, CSCve02474, CSCve04859.

A vulnerability in Cisco AMP for Endpoints Mac Connector Software installed on Apple macOS 10.12 could allow an unauthenticated, remote attacker to cause a kernel panic on an affected system, resulting in a denial of service (DoS) condition. The vulnerability exists if the affected software is running in Block network conviction mode. Exploitation could occur if the system that is running the affected software starts a server process and an address in the IP blacklist cache of the affected software attempts to connect to the affected system. A successful exploit could allow the attacker to cause a kernel panic on the system that is running the affected software, resulting in a DoS condition. Cisco Bug IDs: CSCvk08192.

A vulnerability in the TCP throttling process for the GUI of the Cisco Identity Services Engine (ISE) 2.1(0.474) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device where the ISE GUI may fail to respond to new or established connection requests. The vulnerability is due to insufficient TCP rate limiting protection on the GUI. An attacker could exploit this vulnerability by sending the affected device a high rate of TCP connections to the GUI. An exploit could allow the attacker to cause the GUI to stop responding while the high rate of connections is in progress. Cisco Bug IDs: CSCvc81803.

A vulnerability in the TCP connection handling functionality of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to disable TCP ports and cause a denial of service (DoS) condition on an affected system. The vulnerability is due to a lack of rate-limiting functionality in the TCP Listen application of the affected software. An attacker could exploit this vulnerability by sending a crafted TCP traffic stream in which specific types of TCP packets are flooded to an affected device, for example a TCP packet stream in which the TCP FIN bit is set in all the TCP packets. A successful exploit could allow the attacker to cause certain TCP listening ports on the affected system to stop accepting incoming connections for a period of time or until the affected device is restarted, resulting in a DoS condition. In addition, system resources, such as CPU and memory, could be exhausted during the attack. Cisco Bug IDs: CSCva29806.

A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812.

A vulnerability in the DNS input packet processor for Cisco Prime Network Registrar could allow an unauthenticated, remote attacker to cause the DNS process to momentarily restart, which could lead to a partial denial of service (DoS) condition on the affected system. The vulnerability is due to incomplete DNS packet header validation when the packet is received by the application. An attacker could exploit this vulnerability by sending a malformed DNS packet to the application. An exploit could allow the attacker to cause the DNS process to restart, which could lead to a DoS condition. This vulnerability affects Cisco Prime Network Registrar on all software versions prior to 8.3.5. Cisco Bug IDs: CSCvb55412.

A vulnerability in the ingress UDP packet processing functionality of Cisco Virtualized Packet Core-Distributed Instance (VPC-DI) Software 19.2 through 21.0 could allow an unauthenticated, remote attacker to cause both control function (CF) instances on an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient handling of user-supplied data by the affected software. An attacker could exploit this vulnerability by sending crafted UDP packets to the distributed instance (DI) network addresses of both CF instances on an affected system. A successful exploit could allow the attacker to cause an unhandled error condition on the affected system, which would cause the CF instances to reload and consequently cause the entire VPC to reload, resulting in the disconnection of all subscribers and a DoS condition on the affected system. This vulnerability can be exploited via IPv4 traffic only. Cisco Bug IDs: CSCvc01665 CSCvc35565.

A vulnerability in the Session Initiation Protocol (SIP) of the Cisco TelePresence Codec (TC) and Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause a TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms within the software. An attacker could exploit this vulnerability by sending a flood of SIP INVITE packets to the affected device. An exploit could allow the attacker to impact the availability of services and data of the device, including a complete DoS condition. This vulnerability affects the following Cisco TC and CE platforms when running software versions prior to TC 7.3.8 and CE 8.3.0. Cisco Bug IDs: CSCux94002.

Multiple Cisco products are affected by a vulnerability in local file management for certain system log files of Cisco collaboration products that could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability occurs because a certain system log file does not have a maximum size restriction. Therefore, the file is allowed to consume the majority of available disk space on the appliance. An attacker could exploit this vulnerability by sending crafted remote connection requests to the appliance. Successful exploitation could allow the attacker to increase the size of a system log file so that it consumes most of the disk space. The lack of available disk space could lead to a DoS condition in which the application functions could operate abnormally, making the appliance unstable. This vulnerability affects the following Cisco Voice Operating System (VOS)-based products: Emergency Responder, Finesse, Hosted Collaboration Mediation Fulfillment, MediaSense, Prime License Manager, SocialMiner, Unified Communications Manager (UCM), Unified Communications Manager IM and Presence Service (IM&P - earlier releases were known as Cisco Unified Presence), Unified Communication Manager Session Management Edition (SME), Unified Contact Center Express (UCCx), Unified Intelligence Center (UIC), Unity Connection, Virtualized Voice Browser. This vulnerability also affects Prime Collaboration Assurance and Prime Collaboration Provisioning. Cisco Bug IDs: CSCvd10872, CSCvf64322, CSCvf64332, CSCvi29538, CSCvi29543, CSCvi29544, CSCvi29546, CSCvi29556, CSCvi29571, CSCvi31738, CSCvi31741, CSCvi31762, CSCvi31807, CSCvi31818, CSCvi31823.

A vulnerability in the OSPF version 3 (OSPFv3) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incomplete input validation of specific OSPFv3 packets. An attacker could exploit this vulnerability by sending a malicious OSPFv3 link-state advertisement (LSA) to an affected device. A successful exploit could allow the attacker to cause the OSPFv3 process to crash and restart multiple times, causing the affected device to reload and resulting in a DoS condition. Note: The OSPFv3 feature is disabled by default. To exploit this vulnerability, an attacker must be able to establish a full OSPFv3 neighbor state with an affected device. For more information about exploitation conditions, see the Details section of this advisory.