In Eclipse Mosquitto version from 1.0 to 1.4.15, a Null Dereference vulnerability was found in the Mosquitto library which could lead to crashes for those applications using the library.

In Eclipse Californium version 2.3.0 to 2.6.0, the certificate based (x509 and RPK) DTLS handshakes accidentally fails, because the DTLS server side sticks to a wrong internal state. That wrong internal state is set by a previous certificate based DTLS handshake failure with TLS parameter mismatch. The DTLS server side must be restarted to recover this. This allow clients to force a DoS.

In Eclipse Hono version 1.3.0 and 1.4.0 the AMQP protocol adapter does not verify the size of AMQP messages received from devices. In particular, a device may send messages that are bigger than the max-message-size that the protocol adapter has indicated during link establishment. While the AMQP 1.0 protocol explicitly disallows a peer to send such messages, a hand crafted AMQP 1.0 client could exploit this behavior in order to send a message of unlimited size to the adapter, eventually causing the adapter to fail with an out of memory exception.

In Eclipse OpenJ9 prior to the 0.14.0 release, the Java bytecode verifier incorrectly allows a method to execute past the end of bytecode array causing crashes. Eclipse OpenJ9 v0.14.0 correctly detects this case and rejects the attempted class load.

In Eclipse Jetty versions 10.0.0 thru 10.0.9, and 11.0.0 thru 11.0.9 versions, SslConnection does not release ByteBuffers from configured ByteBufferPool in case of error code paths.

In Eclipse Jetty HTTP/2 server implementation, when encountering an invalid HTTP/2 request, the error handling has a bug that can wind up not properly cleaning up the active connections and associated resources. This can lead to a Denial of Service scenario where there are no enough resources left to process good requests.

In Eclipse Wakaama, ever since its inception until 2021-01-14, the CoAP parsing code does not properly sanitize network-received data.

In versions 1.6 to 2.0.11 of Eclipse Mosquitto, an MQTT v5 client connecting with a large number of user-property properties could cause excessive CPU usage, leading to a loss of performance and possible denial of service.

In Eclipse Wakaama (formerly liblwm2m) 1.0, core/er-coap-13/er-coap-13.c in lwm2mserver in the LWM2M server mishandles invalid options, leading to a memory leak. Processing of a single crafted packet leads to leaking (wasting) 24 bytes of memory. This can lead to termination of the LWM2M server after exhausting all available memory.

In Eclipse Mosquitto 1.4.15 and earlier, a Memory Leak vulnerability was found within the Mosquitto Broker. Unauthenticated clients can send crafted CONNECT packets which could cause a denial of service in the Mosquitto Broker.

In Eclipse Mosquitto 1.4.14, a user can shutdown the Mosquitto server simply by filling the RAM memory with a lot of connections with large payload. This can be done without authentications if occur in connection phase of MQTT protocol.

In Eclipse Mosquitto versions 2.07 and earlier, the server will crash if the client tries to send a PUBLISH packet with topic length = 0.

In Eclipse Jetty version 9.3.x and 9.4.x, the server is vulnerable to Denial of Service conditions if a remote client sends either large SETTINGs frames container containing many settings, or many small SETTINGs frames. The vulnerability is due to the additional CPU and memory allocations required to handle changed settings.

A stack buffer overflow in /ddsi/q_bitset.h of Eclipse IOT Cyclone DDS Project v0.1.0 causes the DDS subscriber server to crash.

A heap buffer overflow in /src/dds_stream.c of Eclipse IOT Cyclone DDS Project v0.1.0 causes the DDS subscriber server to crash.

In Eclipse Mosquitto versions 1.5 to 1.5.2 inclusive, if a message is published to Mosquitto that has a topic starting with $, but that is not $SYS, e.g. $test/test, then an assert is triggered that should otherwise not be reachable and Mosquitto will exit.

In Eclipse Mosquitto version 2.0.0 to 2.0.9, if an authenticated client that had connected with MQTT v5 sent a crafted CONNACK message to the broker, a NULL pointer dereference would occur.

In Eclipse OMR, from the initial contribution to version 0.4.0, some OMR internal port library and utilities consumers of z/OS atoe functions do not check their return values for NULL memory pointers or for memory allocation failures. This can lead to NULL pointer dereference crashes. Beginning in version 0.5.0, internal OMR consumers of atoe functions handle NULL return values and memory allocation failures correctly.

The _xrealloc function in xlsp_xmalloc.c in OpenSLP 2.0.0 allows remote attackers to cause a denial of service (NULL pointer dereference and crash) via a large number of crafted packets, which triggers a memory allocation failure.

Apache HTTP Server protocol handler for the HTTP/2 protocol checks received request headers against the size limitations as configured for the server and used for the HTTP/1 protocol as well. On violation of these restrictions and HTTP response is sent to the client with a status code indicating why the request was rejected. This rejection response was not fully initialised in the HTTP/2 protocol handler if the offending header was the very first one received or appeared in a a footer. This led to a NULL pointer dereference on initialised memory, crashing reliably the child process. Since such a triggering HTTP/2 request is easy to craft and submit, this can be exploited to DoS the server. This issue affected mod_http2 1.15.17 and Apache HTTP Server version 2.4.47 only. Apache HTTP Server 2.4.47 was never released.

Zetetic SQLCipher 4.x before 4.4.3 has a NULL pointer dereferencing issue related to sqlcipher_export in crypto.c and sqlite3StrICmp in sqlite3.c. This may allow an attacker to perform a remote denial of service attack. For example, an SQL injection can be used to execute the crafted SQL command sequence, which causes a segmentation fault.

The mod_dav_svn module for the Apache HTTP Server, as distributed in Apache Subversion before 1.6.17, allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via a request for a baselined WebDAV resource, as exploited in the wild in May 2011.

Shibboleth Service Provider 3.x before 3.2.2 is prone to a NULL pointer dereference flaw involving the session recovery feature. The flaw is exploitable (for a daemon crash) on systems not using this feature if a crafted cookie is supplied.

The ip_evictor function in ip_fragment.c in libnids before 1.24, as used in dsniff and possibly other products, allows remote attackers to cause a denial of service (NULL pointer dereference and crash) via crafted fragmented packets.

IP fragmentation denial of service in FreeBSD allows a remote attacker to cause a crash.

Possible null pointer dereference due to improper validation of APE clip in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Voice & Music, Snapdragon Wearables

A null pointer dereference was addressed with improved input validation. This issue is fixed in macOS Big Sur 11.4, Safari 14.1.1, iOS 14.6 and iPadOS 14.6. A remote attacker may be able to cause a denial of service.

A NULL pointer dereference flaw was found in the way LibVNCServer before 0.9.9 handled certain ClientCutText message. A remote attacker could use this flaw to crash the VNC server by sending a specially crafted ClientCutText message from a VNC client.

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_config function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the content in upload_file variable is NULL in the upload_config function then the strncasecmp would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

Null Pointer Dereference vulnerability exists in D-Link DSL-2740R UK_1.01, which could let a remove malicious user cause a denial of service via the send_hnap_unauthorized function. It could be triggered by sending crafted POST request to /HNAP1/. NOTE: The DSL-2740R and all hardware revisions are considered End of Life and as such this issue will not be patched

It was found in FreeBSD 8.0, 6.3 and 4.9, and OpenBSD 4.6 that a null pointer dereference in ftpd/popen.c may lead to remote denial of service of the ftpd service.

Null Pointer Dereference vulnerability in TRENDnet TEW-755AP 1.11B03, TEW-755AP2KAC 1.11B03, TEW-821DAP2KAC 1.11B03, and TEW-825DAP 1.11B03, which could let a remote malicious user cause a denial of service by sending a POST request to apply_cgi via an action ping_test without a ping_ipaddr key.

Null pointer dereference vulnerability in D-Link DAP-2310 2,10RC039, DAP-2330 1.10RC036 BETA, DAP-2360 2.10RC055, DAP-2553 3.10rc039 BETA, DAP-2660 1.15rc131b, DAP-2690 3.20RC115 BETA, DAP-2695 1.20RC093, DAP-3320 1.05RC027 BETA and DAP-3662 1.05rc069 in the sbin/httpd binary. The crash happens at the `atoi' operation when a specific network package are sent to the httpd binary.

An issue was discovered in Envoy through 1.71.1. There is a remotely exploitable NULL pointer dereference and crash in TLS when an unknown TLS alert code is received.

Null Pointer Dereference vulnerability exists in TRENDnet TEW-755AP 1.11B03, TEW-755AP2KAC 1.11B03, TEW-821DAP2KAC 1.11B03, and TEW-825DAP 1.11B03 by sending the POST request to apply_cgi via a do_graph_auth action without a session_id key.

Null Pointer Dereference vulnerability exists in D-Link DSP-W215 1.10, which could let a remote malicious user cause a denial of servie via usr/bin/lighttpd. It could be triggered by sending an HTTP request without URL in the start line directly to the device. NOTE: The DSP-W215 and all hardware revisions is considered End of Life and as such this issue will not be patched

An issue was discovered in the fltk crate before 0.15.3 for Rust. There is a NULL pointer dereference during attempted use of a non-raster image for a window icon.

Null Pointer Dereference vulnerability exists in TRENDnet TEW-755AP 1.11B03, TEW-755AP2KAC 1.11B03, TEW-821DAP2KAC 1.11B03, and TEW-825DAP 1.11B03 by sending the POST request to apply_cgi with an unknown action name.

An issue was discovered in Storage Performance Development Kit (SPDK) before 20.01.01. If a PDU is sent to the iSCSI target with a zero length (but data is expected), the iSCSI target can crash with a NULL pointer dereference.

Null Pointer Dereference vulnerability exists in TRENDnet TEW-755AP 1.11B03, TEW-755AP2KAC 1.11B03, TEW-821DAP2KAC 1.11B03, and TEW-825DAP 1.11B03, which could let a remote malicious user cause a denial of service by sending the POST request to apply_cgi via the lang action without a language key.

sshd in OpenSSH before 7.4 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an out-of-sequence NEWKEYS message, as demonstrated by Honggfuzz, related to kex.c and packet.c.

CODESYS Gateway 3 before 3.5.16.70 has a NULL pointer dereference that may result in a denial of service (DoS).

Null Pointer Deference vulnerability exists in TRENDnet TEW-755AP 1.11B03, TEW-755AP2KAC 1.11B03, TEW-821DAP2KAC 1.11B03, and TEW-825DAP 1.11B03, which could let a remote malicious user cause a denial os service by sending the POST request to apply_cgi via action do_graph_auth without login_name key.

LibreDWG v0.12.3 was discovered to contain a NULL pointer dereference via out_dxfb.c.

An issue was discovered in the fltk crate before 0.15.3 for Rust. There is a NULL pointer dereference during attempted use of a multi label type if the image is nonexistent.

Null Pointer Dereference vulnerability exists in D-Link DAP-2310 2.07.RC031, DAP-2330 1.07.RC028, DAP-2360 2.07.RC043, DAP-2553 3.06.RC027, DAP-2660 1.13.RC074, DAP-2690 3.16.RC100, DAP-2695 1.17.RC063, DAP-3320 1.01.RC014 and DAP-3662 1.01.RC022 in the upload_certificate function of sbin/httpd binary. When the binary handle the specific HTTP GET request, the strrchr in the upload_certificate function would take NULL as first argument, and incur the NULL pointer dereference vulnerability.

Fluent Bit 1.6.10 has a NULL pointer dereference when an flb_malloc return value is not validated by flb_avro.c or http_server/api/v1/metrics.c.

Onigmo through 6.2.0 has a NULL pointer dereference in onig_error_code_to_str because of fetch_token in regparse.c.

SAP NetWeaver ABAP Server and ABAP Platform (Enqueue Server), versions - KRNL32NUC - 7.22,7.22EXT, KRNL64NUC - 7.22,7.22EXT,7.49, KRNL64UC - 8.04,7.22,7.22EXT,7.49,7.53,7.73, KERNEL - 7.22,8.04,7.49,7.53,7.73, allows an unauthenticated attacker without specific knowledge of the system to send a specially crafted packet over a network which will trigger an internal error in the system due to improper input validation in method EnqConvUniToSrvReq() causing the system to crash and rendering it unavailable. In this attack, no data in the system can be viewed or modified.