In NetX HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.3, an attacker can cause an integer underflow and a subsequent denial of service by writing a very large file, by specially crafted packets with Content-Length in one packet smaller than the data request size of the other packet. A possible workaround is to disable HTTP PUT support. This issue follows an incomplete fix of CVE-2025-0727

In Eclipse Mosquitto versions 1.5 to 1.5.2 inclusive, if a message is published to Mosquitto that has a topic starting with $, but that is not $SYS, e.g. $test/test, then an assert is triggered that should otherwise not be reachable and Mosquitto will exit.

In Eclipse Jetty version 9.3.x and 9.4.x, the server is vulnerable to Denial of Service conditions if a remote client sends either large SETTINGs frames container containing many settings, or many small SETTINGs frames. The vulnerability is due to the additional CPU and memory allocations required to handle changed settings.

In Eclipse Jetty versions 12.0.0 to 12.0.16 included, an HTTP/2 client can specify a very large value for the HTTP/2 settings parameter SETTINGS_MAX_HEADER_LIST_SIZE. The Jetty HTTP/2 server does not perform validation on this setting, and tries to allocate a ByteBuffer of the specified capacity to encode HTTP responses, likely resulting in OutOfMemoryError being thrown, or even the JVM process exiting.

Eclipse tinydtls 0.8.2 for Eclipse IoT allows remote attackers to cause a denial of service (DTLS peer crash) by sending a "Change cipher spec" packet without pre-handshake.

In Eclipse Mosquitto 1.4.14, a user can shutdown the Mosquitto server simply by filling the RAM memory with a lot of connections with large payload. This can be done without authentications if occur in connection phase of MQTT protocol.

In Eclipse Mosquitto version from 1.0 to 1.4.15, a Null Dereference vulnerability was found in the Mosquitto library which could lead to crashes for those applications using the library.

In Eclipse Mosquitto 1.4.15 and earlier, a Memory Leak vulnerability was found within the Mosquitto Broker. Unauthenticated clients can send crafted CONNECT packets which could cause a denial of service in the Mosquitto Broker.

In Eclipse Californium version 2.0.0 to 2.7.2 and 3.0.0-3.5.0 a DTLS resumption handshake falls back to a DTLS full handshake on a parameter mismatch without using a HelloVerifyRequest. Especially, if used with certificate based cipher suites, that results in message amplification (DDoS other peers) and high CPU load (DoS own peer). The misbehavior occurs only with DTLS_VERIFY_PEERS_ON_RESUMPTION_THRESHOLD values larger than 0.

The package org.eclipse.milo:sdk-server before 0.6.8 are vulnerable to Denial of Service (DoS) when bypassing the limitations for excessive memory consumption by sending multiple CloseSession requests with the deleteSubscription parameter equal to False.

In NetX HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.2, an attacker can cause an integer underflow and a subsequent denial of service by writing a very large file, by specially crafted packets with Content-Length smaller than the data request size. A possible workaround is to disable HTTP PUT support.

In Eclipse Open9J versions 0.21 to 0.58, a pre-authentication remote attacker can crash JITServer by sending a 32-byte crafted TCP message.

In Eclipse Jetty versions 10.0.0 thru 10.0.9, and 11.0.0 thru 11.0.9 versions, SslConnection does not release ByteBuffers from configured ByteBufferPool in case of error code paths.

In NetX HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.2, an attacker can cause a denial of service by specially crafted packets. The core issue is missing closing of a file in case of an error condition, resulting in the 404 error for each further file request. Users can work-around the issue by disabling the PUT request support.

In Eclipse Jetty HTTP/2 server implementation, when encountering an invalid HTTP/2 request, the error handling has a bug that can wind up not properly cleaning up the active connections and associated resources. This can lead to a Denial of Service scenario where there are no enough resources left to process good requests.

In Eclipse Vert.x version 4.3.0 to 4.5.9, the gRPC server does not limit the maximum length of message payload (Maven GAV: io.vertx:vertx-grpc-server and io.vertx:vertx-grpc-client).  This is fixed in the 4.5.10 version.  Note this does not affect the Vert.x gRPC server based grpc-java and Netty libraries (Maven GAV: io.vertx:vertx-grpc)

In versions 1.6 to 2.0.11 of Eclipse Mosquitto, an MQTT v5 client connecting with a large number of user-property properties could cause excessive CPU usage, leading to a loss of performance and possible denial of service.

In Eclipse Wakaama, ever since its inception until 2021-01-14, the CoAP parsing code does not properly sanitize network-received data.

In Eclipse Mosquitto versions 2.07 and earlier, the server will crash if the client tries to send a PUBLISH packet with topic length = 0.

In Eclipse Jetty 7.2.2 to 9.4.38, 10.0.0.alpha0 to 10.0.1, and 11.0.0.alpha0 to 11.0.1, CPU usage can reach 100% upon receiving a large invalid TLS frame.

Jetty is a Java based web server and servlet engine. An HTTP/2 SSL connection that is established and TCP congested will be leaked when it times out. An attacker can cause many connections to end up in this state, and the server may run out of file descriptors, eventually causing the server to stop accepting new connections from valid clients. The vulnerability is patched in 9.4.54, 10.0.20, 11.0.20, and 12.0.6.

A denial-of-service vulnerability exists in the NetX IPv6 component functionality of Eclipse ThreadX NetX Duo. A specially crafted network packet of "Packet Too Big" with more than 15 different source address can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability.

In NextX Duo before 6.4.4, in the HTTP client module, the network support code for Eclipse Foundation ThreadX, the parsing of HTTP header fields was missing bounds verification. A crafted server response could cause undefined behavior.

In NextX Duo's snmp addon versions before 6.4.4, a part of the Eclipse Foundation ThreadX, an attacker could cause an out-of-bound read by a crafted SNMPv3 security parameters.

In Eclipse Jetty, versions <=9.4.57, <=10.0.25, <=11.0.25, <=12.0.21, <=12.1.0.alpha2, an HTTP/2 client may trigger the server to send RST_STREAM frames, for example by sending frames that are malformed or that should not be sent in a particular stream state, therefore forcing the server to consume resources such as CPU and memory. For example, a client can open a stream and then send WINDOW_UPDATE frames with window size increment of 0, which is illegal. Per specification https://www.rfc-editor.org/rfc/rfc9113.html#name-window_update , the server should send a RST_STREAM frame. The client can now open another stream and send another bad WINDOW_UPDATE, therefore causing the server to consume more resources than necessary, as this case does not exceed the max number of concurrent streams, yet the client is able to create an enormous amount of streams in a short period of time. The attack can be performed with other conditions (for example, a DATA frame for a closed stream) that cause the server to send a RST_STREAM frame. Links: * https://github.com/jetty/jetty.project/security/advisories/GHSA-mmxm-8w33-wc4h

In Eclipse Californium version 2.3.0 to 2.6.0, the certificate based (x509 and RPK) DTLS handshakes accidentally fails, because the DTLS server side sticks to a wrong internal state. That wrong internal state is set by a previous certificate based DTLS handshake failure with TLS parameter mismatch. The DTLS server side must be restarted to recover this. This allow clients to force a DoS.

A heap buffer overflow in /src/dds_stream.c of Eclipse IOT Cyclone DDS Project v0.1.0 causes the DDS subscriber server to crash.

In Eclipse Jetty, versions 12.0.0-12.0.31 and 12.1.0-12.0.5, class GzipHandler exposes a vulnerability when a compressed HTTP request, with Content-Encoding: gzip, is processed and the corresponding response is not compressed. This happens because the JDK Inflater is allocated for decompressing the request, but it is not released because the release mechanism is tied to the compressed response. In this case, since the response is not compressed, the release mechanism does not trigger, causing the leak.

In Mosquitto before 2.0.16, a memory leak occurs when clients send v5 CONNECT packets with a will message that contains invalid property types.

A stack buffer overflow in /ddsi/q_bitset.h of Eclipse IOT Cyclone DDS Project v0.1.0 causes the DDS subscriber server to crash.

In Eclipse Wakaama (formerly liblwm2m) 1.0, core/er-coap-13/er-coap-13.c in lwm2mserver in the LWM2M server mishandles invalid options, leading to a memory leak. Processing of a single crafted packet leads to leaking (wasting) 24 bytes of memory. This can lead to termination of the LWM2M server after exhausting all available memory.

In Eclipse OpenJ9 prior to the 0.14.0 release, the Java bytecode verifier incorrectly allows a method to execute past the end of bytecode array causing crashes. Eclipse OpenJ9 v0.14.0 correctly detects this case and rejects the attempted class load.

In Eclipse Parsson before 1.0.4 and 1.1.3, a document with a large depth of nested objects can allow an attacker to cause a Java stack overflow exception and denial of service. Eclipse Parsson allows processing (e.g. parse, generate, transform and query) JSON documents.

In Eclipse Mosquito before and including 2.0.5, establishing a connection to the mosquitto server without sending data causes the EPOLLOUT event to be added, which results excessive CPU consumption. This could be used by a malicious actor to perform denial of service type attack. This issue is fixed in 2.0.6

The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.

In NetX Duo component HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.3, an attacker can cause an integer underflow and a subsequent denial of service by writing a very large file, by specially crafted packets with Content-Length smaller than the data request size. A possible workaround is to disable HTTP PUT support. This issue follows an uncomplete fix in CVE-2025-0728.

In NetX HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.3, an attacker can cause a denial of service by specially crafted packets. The core issue is missing closing of a file in case of an error condition, resulting in the 404 error for each further file request. Users can work-around the issue by disabling the PUT request support. This issue follows an incomplete fix of CVE-2025-0726.

In Eclipse Parsson before versions 1.1.4 and 1.0.5, Parsing JSON from untrusted sources can lead malicious actors to exploit the fact that the built-in support for parsing numbers with large scale in Java has a number of edge cases where the input text of a number can lead to much larger processing time than one would expect. To mitigate the risk, parsson put in place a size limit for the numbers as well as their scale.

Eclipse Jetty provides a web server and servlet container. In versions 11.0.0 through 11.0.15, 10.0.0 through 10.0.15, and 9.0.0 through 9.4.52, an integer overflow in `MetaDataBuilder.checkSize` allows for HTTP/2 HPACK header values to exceed their size limit. `MetaDataBuilder.java` determines if a header name or value exceeds the size limit, and throws an exception if the limit is exceeded. However, when length is very large and huffman is true, the multiplication by 4 in line 295 will overflow, and length will become negative. `(_size+length)` will now be negative, and the check on line 296 will not be triggered. Furthermore, `MetaDataBuilder.checkSize` allows for user-entered HPACK header value sizes to be negative, potentially leading to a very large buffer allocation later on when the user-entered size is multiplied by 2. This means that if a user provides a negative length value (or, more precisely, a length value which, when multiplied by the 4/3 fudge factor, is negative), and this length value is a very large positive number when multiplied by 2, then the user can cause a very large buffer to be allocated on the server. Users of HTTP/2 can be impacted by a remote denial of service attack. The issue has been fixed in versions 11.0.16, 10.0.16, and 9.4.53. There are no known workarounds.

The broker in Eclipse Mosquitto 1.3.2 through 2.x before 2.0.16 has a memory leak that can be abused remotely when a client sends many QoS 2 messages with duplicate message IDs, and fails to respond to PUBREC commands. This occurs because of mishandling of EAGAIN from the libc send function.

There exists a security vulnerability in Jetty's DosFilter which can be exploited by unauthorized users to cause remote denial-of-service (DoS) attack on the server using DosFilter. By repeatedly sending crafted requests, attackers can trigger OutofMemory errors and exhaust the server's memory finally.

In NetX HTTP server functionality of Eclipse ThreadX NetX Duo before version 6.4.2, an attacker can cause an integer underflow and a subsequent denial of service by writing a very large file, by specially crafted packets with Content-Length in one packet smaller than the data request size of the other packet. A possible workaround is to disable HTTP PUT support.

In Eclipse Mosquitto up to version 2.0.18a, an attacker can achieve memory leaking, segmentation fault or heap-use-after-free by sending specific sequences of "CONNECT", "DISCONNECT", "SUBSCRIBE", "UNSUBSCRIBE" and "PUBLISH" packets.

Azure RTOS USBx is a USB host, device, and on-the-go (OTG) embedded stack, fully integrated with Azure RTOS ThreadX and available for all Azure RTOS ThreadX–supported processors. Azure RTOS USBX implementation of host support for USB CDC ECM includes an integer underflow and a buffer overflow in the `_ux_host_class_cdc_ecm_mac_address_get` function which may be potentially exploited to achieve remote code execution or denial of service. Setting mac address string descriptor length to a `0` or `1` allows an attacker to introduce an integer underflow followed (string_length) by a buffer overflow of the `cdc_ecm -> ux_host_class_cdc_ecm_node_id` array. This may allow one to redirect the code execution flow or introduce a denial of service. The fix has been included in USBX release [6.1.12](https://github.com/azure-rtos/usbx/releases/tag/v6.1.12_rel). Improved mac address string descriptor length validation to check for unexpectedly small values may be used as a workaround.

A Business Logic vulnerability exists in SourceCodester Pharmacy Product Management System 1.0 in the add-stock.php file. The application fails to validate the "txtqty" parameter during stock entry, allowing negative values to be processed. This causes the system to decrease the inventory level instead of increasing it, leading to inventory corruption and potential Denial of Service by depleting stock records.

Conditional Fields for Contact Form 7 WordPress plugin through version 2.7.2 contains an uncontrolled resource consumption vulnerability in the Wpcf7cfMailParser class where the hide_hidden_mail_fields_regex_callback() method reads an iteration count directly from user-supplied POST parameters without validation or upper bound enforcement. Unauthenticated attackers can supply an arbitrarily large integer value through the REST API endpoint to cause unbounded loop execution with multiple preg_replace() operations, exhausting server memory and crashing the PHP process.

TensorFlow is an open source platform for machine learning. If `ThreadUnsafeUnigramCandidateSampler` is given input `filterbank_channel_count` greater than the allowed max size, TensorFlow will crash. We have patched the issue in GitHub commit 39ec7eaf1428e90c37787e5b3fbd68ebd3c48860. The fix will be included in TensorFlow 2.11. We will also cherrypick this commit on TensorFlow 2.10.1, 2.9.3, and TensorFlow 2.8.4, as these are also affected and still in supported range.

ImpactThe undici WebSocket client is vulnerable to a denial-of-service attack due to improper validation of the server_max_window_bits parameter in the permessage-deflate extension. When a WebSocket client connects to a server, it automatically advertises support for permessage-deflate compression. A malicious server can respond with an out-of-range server_max_window_bits value (outside zlib's valid range of 8-15). When the server subsequently sends a compressed frame, the client attempts to create a zlib InflateRaw instance with the invalid windowBits value, causing a synchronous RangeError exception that is not caught, resulting in immediate process termination. The vulnerability exists because: * The isValidClientWindowBits() function only validates that the value contains ASCII digits, not that it falls within the valid range 8-15 * The createInflateRaw() call is not wrapped in a try-catch block * The resulting exception propagates up through the call stack and crashes the Node.js process

Florent Thiéry has found that selected Axis devices were vulnerable to handling certain ethernet frames which could lead to the Axis device becoming unavailable in the network. Axis has released patched AXIS OS versions for the highlighted flaw for products that are still under AXIS OS software support. Please refer to the Axis security advisory for more information and solution.