Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DSL-2740B Gateway with firmware EU_1.00 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or disable Wireless MAC Address Filters via a wlFltMode action to wlmacflt.cmd, (2) enable or disable firewall protections via a request to scdmz.cmd, or (3) enable or disable remote management via a save action to scsrvcntr.cmd.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR865L router (Rev. A1) with firmware before 1.05b07 allow remote attackers to hijack the authentication of administrators for requests that (1) change the administrator password or (2) enable remote management via a request to hedwig.cgi or (3) activate configuration changes via a request to pigwidgeon.cgi.

CSRF exists on D-Link DIR-868L devices, leading to (for example) a change to the Admin password. hedwig.cgi and pigwidgeon.cgi are two of the affected components.

Cross-site request forgery (CSRF) vulnerability in redpass.cgi in D-Link DSL-2640B Firmware EU_4.00 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the sysPassword parameter.

An issue was discovered on D-Link DCS-1130 devices. The device provides a crossdomain.xml file with no restrictions on who can access the webserver. This allows an hosted flash file on any domain to make calls to the device's webserver and pull any information that is stored on the device. In this case, user's credentials are stored in clear text on the device and can be pulled easily. It also seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site flashing attack on the user's browser and execute any action on the device provided by the web management interface which steals the credentials from tools_admin.cgi file's response and displays it inside a Textfield.

On the D-Link DIR-615 before v20.12PTb04, if a victim logged in to the Router's Web Interface visits a malicious site from another Browser tab, the malicious site then can send requests to the victim's Router without knowing the credentials (CSRF). An attacker can host a page that sends a POST request to Form2File.htm that tries to upload Firmware to victim's Router. This causes the router to reboot/crash resulting in Denial of Service. An attacker may succeed in uploading malicious Firmware.

Cross Site Request Forgery (CSRF) on D-Link DSL-2730U C1 IN_1.00 devices allows remote attackers to change the DNS or firewall configuration or any password.

CSRF exists on D-Link DIR-600M Rev. Cx devices before v3.05ENB01_beta_20170306. This can be used to bypass authentication and insert XSS sequences or possibly have unspecified other impact.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP 1150 with firmware 1.2.94 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or (2) disable the DMZ in the Firewall/DMZ section via a request to index.cgi or (3) add, (4) modify, or (5) delete URL-filter settings in the Control/URL-filter section via a request to index.cgi, as demonstrated by adding a rule that blocks access to google.com.

D-Link DIR-865L Ax 1.20B01 Beta devices allow CSRF.

Multiple cross-site request forgery (CSRF) vulnerabilities in the D-Link DIR-816L Wireless Router with firmware before 2.06.B09_BETA allow remote attackers to hijack the authentication of administrators for requests that (1) change the admin password, (2) change the network policy, or (3) possibly have other unspecified impact via crafted requests to hedwig.cgi and pigwidgeon.cgi.

Cross-site request forgery (CSRF) vulnerability in D-Link DIR-815 devices with firmware before 2.07.B01 allows remote attackers to hijack the authentication of arbitrary users for requests that insert XSS sequences.

Cross-site request forgery (CSRF) vulnerability in D-Link DWR-113 (Rev. Ax) with firmware before 2.03b02 allows remote attackers to hijack the authentication of administrators for requests that change the admin password via unspecified vectors.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR-600 router (rev. Bx) with firmware before 2.17b02 allow remote attackers to hijack the authentication of administrators for requests that (1) create an administrator account or (2) enable remote management via a crafted configuration module to hedwig.cgi, (3) activate new configuration settings via a SETCFG,SAVE,ACTIVATE action to pigwidgeon.cgi, or (4) send a ping via a ping action to diagnostic.php.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP-1360 router with firmware 2.5.4 and earlier allow remote attackers to hijack the authentication of unspecified users for requests that (1) change the MAC filter restrict mode, (2) add a MAC address to the filter, or (3) remove a MAC address from the filter via a crafted request to index.cgi.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP-1360 with firmware 2.5.4 and earlier allow remote attackers to hijack the authentication of unspecified users for requests that change the (1) Enable Wireless, (2) MBSSID, (3) BSSID, (4) Hide Access Point, (5) SSID, (6) Country, (7) Channel, (8) Wireless mode, or (9) Max Associated Clients setting via a crafted request to index.cgi.

D-Link DIR-100 4.03B07: cli.cgi CSRF

D-Link DIR-601 B1 2.00NA devices have CSRF because no anti-CSRF token is implemented. A remote attacker could exploit this in conjunction with CVE-2019-16327 to enable remote router management and device compromise. NOTE: this is an end-of-life product.

D-Link DIR-655 C devices before 3.02B05 BETA03 allow CSRF for the entire management console.

Cross-site request forgery (CSRF) vulnerability in setup/security.cgi in D-Link DCS-900, DCS-2000, and DCS-5300 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the rootpass parameter.

Cross-site request forgery (CSRF) vulnerability in D-Link DCS-931L with firmware 1.04 and earlier allows remote attackers to hijack the authentication of unspecified victims via unknown vectors.

D-Link DIR-615 HW: T1 FW:20.09 is vulnerable to Cross-Site Request Forgery (CSRF) vulnerability. This enables an attacker to perform an unwanted action on a wireless router for which the user/admin is currently authenticated, as demonstrated by changing the Security option from WPA2 to None, or changing the hiddenSSID parameter, SSID parameter, or a security-option password.

D-Link DCS-936L devices with firmware before 1.05.07 have an inadequate CSRF protection mechanism that requires the device's IP address to be a substring of the HTTP Referer header.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of changing the administrative password for the web management interface. It seems that the device does not implement any cross-site request forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface to change the user's password.

D-Link DIR-601 A1 1.02NA devices do not require the old password for a password change, which occurs in cleartext.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x00023BCC which calls the "Send_mail" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue.

D-Link DIR-853 A1 FW1.20B07 was discovered to contain a stack-based buffer overflow vulnerability via the Password parameter in the SetQuickVPNSettings module.

D-Link DGS-1100 devices with Rev.B firmware 1.01.018 have a hardcoded SSL private key, which allows man-in-the-middle attackers to spoof devices by hijacking an HTTPS session.

D-Link DIR-100 4.03B07: cli.cgi security bypass due to failure to check authentication parameters

Multiple cross-site request forgery (CSRF) vulnerabilities on the D-Link DI-524 Wireless Router with firmware 9.01 allow remote attackers to (1) change the admin password, (2) reboot the device, or (3) possibly have unspecified other impact via crafted requests to CGI programs.

Cross Site Request Forgery vulnerability in DLink DWR 2000M 5G CPE With Wifi 6 Ax1800 and Dlink DWR 5G CPE DWR-2000M_1.34ME allows a local attacker to obtain sensitive information via the Port forwarding option.

An issue was discovered in the Armor module in Polaris FT Intellect Core Banking 9.7.1. CSRF can occur via a /CollatWebApp/gcmsRefInsert?name=SUPP URI.

A CSRF vulnerability in the admin panel in Gogs through 0.11.53 allows remote attackers to execute admin operations via a crafted issue / link.

Trendnet AC2600 TEW-827DRU version 2.08B01 does not properly implement csrf protections. Most pages lack proper usage of CSRF protections or mitigations. Additionally, pages that do make use of CSRF tokens are trivially bypassable as the server does not appear to validate them properly (i.e. re-using an old token or finding the token thru some other method is possible).

An issue was discovered in Juunan06 eCommerce through 2018-08-05. There is a CSRF vulnerability in ee/eBoutique/app/template/includes/crudTreatment.php that can add new users and add products.

Multiple cross-site request forgery (CSRF) vulnerabilities in Atmail Webmail Server before 7.2 allow remote attackers to hijack the authentication of administrators for requests that (1) add user accounts, (2) modify user accounts, (3) delete user accounts, or (4) stop the product's service.

Tweetbot 1.3.3 for Mac, and 2.8.5 for iPad and iPhone, does not require confirmation of (1) follow or (2) favorite actions, which allows remote attackers to automatically force the user to perform undesired actions, as demonstrated via the tweetbot:///follow/ URL.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts.

An issue was discovered in OneThink v1.1. There is a CSRF vulnerability in admin.php?s=/AuthManager/addToGroup.html that can endow administrator privileges.

Cross-site request forgery (CSRF) vulnerability in Aterm WG2600HP firmware Ver1.0.2 and earlier, and Aterm WG2600HP2 firmware Ver1.0.2 and earlier allows remote attackers to hijack the authentication of administrators via unspecified vectors.

The administration web interface for the Arris Surfboard SB8200 lacks any protections against cross-site request forgery attacks. This means that an attacker could make configuration changes (such as changing the administrative password) without the consent of the user.

Cross-site request forgery (CSRF) vulnerability in Siemens WinCC (TIA Portal) 11 and 12 before 12 SP1 allows remote attackers to hijack the authentication of unspecified victims by leveraging improper configuration of SIMATIC HMI panels by the WinCC product.

IBM Sterling File Gateway 2.2.0.0 through 6.1.1.0 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM X-Force ID: 197790.

Racom's MIDGE Firmware 4.4.40.105 contains an issue that allows for cross-site request forgeries.

inc/central.class.php in GLPI before 0.84.2 does not attempt to make install/install.php unavailable after an installation is completed, which allows remote attackers to conduct cross-site request forgery (CSRF) attacks, and (1) perform a SQL injection via an Etape_4 action or (2) execute arbitrary PHP code via an update_1 action.

Cross-site request forgery (CSRF) vulnerability in the TEQneers SEO Enhancements (tq_seo) extension before 5.0.1 for TYPO3 allows remote attackers to hijack the authentication of unspecified victims via unknown vectors.

Draytek VigorConnect 1.6.0-B3 lacks cross-site request forgery protections and does not sufficiently verify whether a well-formed, valid, consistent request was intentionally provided by the user who submitted the request.

Cross-site request forgery (CSRF) vulnerability in Name Directory 1.17.4 and earlier allows remote attackers to hijack the authentication of administrators via unspecified vectors.