An issue was discovered on D-Link DCS-1130 devices. The device provides a crossdomain.xml file with no restrictions on who can access the webserver. This allows an hosted flash file on any domain to make calls to the device's webserver and pull any information that is stored on the device. In this case, user's credentials are stored in clear text on the device and can be pulled easily. It also seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site flashing attack on the user's browser and execute any action on the device provided by the web management interface which steals the credentials from tools_admin.cgi file's response and displays it inside a Textfield.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DSL-2740B Gateway with firmware EU_1.00 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or disable Wireless MAC Address Filters via a wlFltMode action to wlmacflt.cmd, (2) enable or disable firewall protections via a request to scdmz.cmd, or (3) enable or disable remote management via a save action to scsrvcntr.cmd.

CSRF exists on D-Link DIR-600M Rev. Cx devices before v3.05ENB01_beta_20170306. This can be used to bypass authentication and insert XSS sequences or possibly have unspecified other impact.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR865L router (Rev. A1) with firmware before 1.05b07 allow remote attackers to hijack the authentication of administrators for requests that (1) change the administrator password or (2) enable remote management via a request to hedwig.cgi or (3) activate configuration changes via a request to pigwidgeon.cgi.

Cross-site request forgery (CSRF) vulnerability in redpass.cgi in D-Link DSL-2640B Firmware EU_4.00 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the sysPassword parameter.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP 1150 with firmware 1.2.94 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or (2) disable the DMZ in the Firewall/DMZ section via a request to index.cgi or (3) add, (4) modify, or (5) delete URL-filter settings in the Control/URL-filter section via a request to index.cgi, as demonstrated by adding a rule that blocks access to google.com.

D-Link DIR-601 B1 2.00NA devices have CSRF because no anti-CSRF token is implemented. A remote attacker could exploit this in conjunction with CVE-2019-16327 to enable remote router management and device compromise. NOTE: this is an end-of-life product.

D-Link DIR-655 C devices before 3.02B05 BETA03 allow CSRF for the entire management console.

On the D-Link DIR-615 before v20.12PTb04, if a victim logged in to the Router's Web Interface visits a malicious site from another Browser tab, the malicious site then can send requests to the victim's Router without knowing the credentials (CSRF). An attacker can host a page that sends a POST request to Form2File.htm that tries to upload Firmware to victim's Router. This causes the router to reboot/crash resulting in Denial of Service. An attacker may succeed in uploading malicious Firmware.

D-Link DCS cameras have a weak/insecure CrossDomain.XML file that allows sites hosting malicious Flash objects to access and/or change the device's settings via a CSRF attack. This is because of the 'allow-access-from domain' child element set to *, thus accepting requests from any domain. If a victim logged into the camera's web console visits a malicious site hosting a malicious Flash file from another Browser tab, the malicious Flash file then can send requests to the victim's DCS series Camera without knowing the credentials. An attacker can host a malicious Flash file that can retrieve Live Feeds or information from the victim's DCS series Camera, add new admin users, or make other changes to the device. Known affected devices are DCS-933L with firmware before 1.13.05, DCS-5030L, DCS-5020L, DCS-2530L, DCS-2630L, DCS-930L, DCS-932L, and DCS-932LB1.

Cross Site Request Forgery (CSRF) on D-Link DSL-2730U C1 IN_1.00 devices allows remote attackers to change the DNS or firewall configuration or any password.

CSRF exists on D-Link DIR-868L devices, leading to (for example) a change to the Admin password. hedwig.cgi and pigwidgeon.cgi are two of the affected components.

Multiple cross-site request forgery (CSRF) vulnerabilities in the D-Link DIR-816L Wireless Router with firmware before 2.06.B09_BETA allow remote attackers to hijack the authentication of administrators for requests that (1) change the admin password, (2) change the network policy, or (3) possibly have other unspecified impact via crafted requests to hedwig.cgi and pigwidgeon.cgi.

Cross-site request forgery (CSRF) vulnerability in D-Link DIR-815 devices with firmware before 2.07.B01 allows remote attackers to hijack the authentication of arbitrary users for requests that insert XSS sequences.

Cross-site request forgery (CSRF) vulnerability in D-Link DWR-113 (Rev. Ax) with firmware before 2.03b02 allows remote attackers to hijack the authentication of administrators for requests that change the admin password via unspecified vectors.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR-600 router (rev. Bx) with firmware before 2.17b02 allow remote attackers to hijack the authentication of administrators for requests that (1) create an administrator account or (2) enable remote management via a crafted configuration module to hedwig.cgi, (3) activate new configuration settings via a SETCFG,SAVE,ACTIVATE action to pigwidgeon.cgi, or (4) send a ping via a ping action to diagnostic.php.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP-1360 with firmware 2.5.4 and earlier allow remote attackers to hijack the authentication of unspecified users for requests that change the (1) Enable Wireless, (2) MBSSID, (3) BSSID, (4) Hide Access Point, (5) SSID, (6) Country, (7) Channel, (8) Wireless mode, or (9) Max Associated Clients setting via a crafted request to index.cgi.

D-Link DIR-100 4.03B07: cli.cgi CSRF

Cross-site request forgery (CSRF) vulnerability in setup/security.cgi in D-Link DCS-900, DCS-2000, and DCS-5300 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the rootpass parameter.

D-Link DIR-865L Ax 1.20B01 Beta devices allow CSRF.

Cross-site request forgery (CSRF) vulnerability in D-Link DCS-931L with firmware 1.04 and earlier allows remote attackers to hijack the authentication of unspecified victims via unknown vectors.

D-Link DIR-615 HW: T1 FW:20.09 is vulnerable to Cross-Site Request Forgery (CSRF) vulnerability. This enables an attacker to perform an unwanted action on a wireless router for which the user/admin is currently authenticated, as demonstrated by changing the Security option from WPA2 to None, or changing the hiddenSSID parameter, SSID parameter, or a security-option password.

D-Link DCS-936L devices with firmware before 1.05.07 have an inadequate CSRF protection mechanism that requires the device's IP address to be a substring of the HTTP Referer header.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of changing the administrative password for the web management interface. It seems that the device does not implement any cross-site request forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface to change the user's password.

D-Link DIR-601 A1 1.02NA devices do not require the old password for a password change, which occurs in cleartext.

D-Link DGS-1100 devices with Rev.B firmware 1.01.018 have a hardcoded SSL private key, which allows man-in-the-middle attackers to spoof devices by hijacking an HTTPS session.

D-Link DIR-100 4.03B07: cli.cgi security bypass due to failure to check authentication parameters

Cross Site Request Forgery vulnerability in DLink DWR 2000M 5G CPE With Wifi 6 Ax1800 and Dlink DWR 5G CPE DWR-2000M_1.34ME allows a local attacker to obtain sensitive information via the Port forwarding option.

Multiple cross-site request forgery (CSRF) vulnerabilities on the D-Link DI-524 Wireless Router with firmware 9.01 allow remote attackers to (1) change the admin password, (2) reboot the device, or (3) possibly have unspecified other impact via crafted requests to CGI programs.

CSRF exists on Peplink Balance 305, 380, 580, 710, 1350, and 2500 devices with firmware before fw-b305hw2_380hw6_580hw2_710hw3_1350hw2_2500-7.0.1-build2093. The CGI scripts in the administrative interface are affected. This allows an attacker to execute commands, if a logged in user visits a malicious website. This can for example be used to change the credentials of the administrative webinterface.

CSRF exists in BigTree CMS through 4.2.18 with the force parameter to /admin/pages/revisions.php - for example: /admin/pages/revisions/1/?force=false. A page with id=1 can be unlocked.

atmail before 7.8.0.2 has CSRF, allowing an attacker to upload and import users via CSV.

Cross-site request forgery (CSRF) vulnerability in Trend Micro ServerProtect for Linux 3.0 before CP 1531 allows remote attackers to hijack the authentication of users for requests to start an update from an arbitrary source via a crafted request to SProtectLinux/scanoption_set.cgi, related to the lack of anti-CSRF tokens.

mailcow 0.14, as used in "mailcow: dockerized" and other products, has CSRF.

In WordPress before 4.7.5, a Cross Site Request Forgery (CSRF) vulnerability exists in the filesystem credentials dialog because a nonce is not required for updating credentials.

Cross-site request forgery (CSRF) vulnerability in the Subscribe to Podcast feature in Subsonic 6.1.1 allows remote attackers to hijack the authentication of unspecified victims for requests that conduct cross-site scripting (XSS) attacks or possibly have unspecified other impact via the name parameter to playerSettings.view.

Multiple cross-site request forgery (CSRF) vulnerabilities in Atmail Webmail Server before 7.2 allow remote attackers to hijack the authentication of administrators for requests that (1) add user accounts, (2) modify user accounts, (3) delete user accounts, or (4) stop the product's service.

Tweetbot 1.3.3 for Mac, and 2.8.5 for iPad and iPhone, does not require confirmation of (1) follow or (2) favorite actions, which allows remote attackers to automatically force the user to perform undesired actions, as demonstrated via the tweetbot:///follow/ URL.

The Comcast firmware on Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices allows configuration changes via CSRF.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides a user with the capability of installing or deleting apps on the device using the web management interface. It seems that the device does not implement any cross-site request forgery protection mechanism which allows an attacker to trick a user who navigates to an attacker controlled page to install or delete an application on the device. Note: The cross-site request forgery is a systemic issue across all other functionalities of the device.

Multiple cross-site request forgery (CSRF) vulnerabilities in the Podcast feature in Subsonic 6.1.1 allow remote attackers to hijack the authentication of users for requests that (1) subscribe to a podcast via the add parameter to podcastReceiverAdmin.view or (2) update Internet Radio Settings via the urlRedirectCustomUrl parameter to networkSettings.view. NOTE: These vulnerabilities can be exploited to conduct server-side request forgery (SSRF) attacks.

Cross-site request forgery (CSRF) vulnerability in Siemens WinCC (TIA Portal) 11 and 12 before 12 SP1 allows remote attackers to hijack the authentication of unspecified victims by leveraging improper configuration of SIMATIC HMI panels by the WinCC product.

The Comcast firmware on Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST) devices allows configuration changes via CSRF.

inc/central.class.php in GLPI before 0.84.2 does not attempt to make install/install.php unavailable after an installation is completed, which allows remote attackers to conduct cross-site request forgery (CSRF) attacks, and (1) perform a SQL injection via an Etape_4 action or (2) execute arbitrary PHP code via an update_1 action.

BigTree CMS through 4.2.18 has CSRF related to the core\admin\modules\users\profile\update.php script (modify user information), the index.php/admin/developer/packages/delete/ URI (remove packages), the index.php/admin/developer/upgrade/ignore/?versions= URI, and the index.php/admin/developer/upgrade/set-ftp-directory/ URI.

Cross-site request forgery (CSRF) vulnerability in the TEQneers SEO Enhancements (tq_seo) extension before 5.0.1 for TYPO3 allows remote attackers to hijack the authentication of unspecified victims via unknown vectors.

Cross Site Request Forgery (CSRF) vulnerability exists in Gitea before 1.5.2 via API routes.This can be dangerous especially with state altering POST requests.

Multiple CSRF issues exist in BigTree CMS through 4.2.18 - the clear parameter to core\admin\modules\dashboard\vitals-statistics\404\clear.php and the from or to parameter to core\admin\modules\dashboard\vitals-statistics\404\create-301.php.

Multiple cross-site request forgery (CSRF) vulnerabilities in Simple Invoices 2013.1.beta.8 allow remote attackers to hijack the authentication of admins for requests that can (1) create new administrator user accounts and take over the entire application, (2) create regular user accounts, or (3) change configuration parameters such as tax rates and the enable/disable status of PayPal payment modules.

atmail before 7.8.0.2 has CSRF, allowing an attacker to change the SMTP hostname and hijack all emails.