Multiple cross-site request forgery (CSRF) vulnerabilities in the D-Link DIR-816L Wireless Router with firmware before 2.06.B09_BETA allow remote attackers to hijack the authentication of administrators for requests that (1) change the admin password, (2) change the network policy, or (3) possibly have other unspecified impact via crafted requests to hedwig.cgi and pigwidgeon.cgi.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP 1150 with firmware 1.2.94 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or (2) disable the DMZ in the Firewall/DMZ section via a request to index.cgi or (3) add, (4) modify, or (5) delete URL-filter settings in the Control/URL-filter section via a request to index.cgi, as demonstrated by adding a rule that blocks access to google.com.

Cross-site request forgery (CSRF) vulnerability in D-Link DCS-931L with firmware 1.04 and earlier allows remote attackers to hijack the authentication of unspecified victims via unknown vectors.

Cross-site request forgery (CSRF) vulnerability in D-Link DIR-815 devices with firmware before 2.07.B01 allows remote attackers to hijack the authentication of arbitrary users for requests that insert XSS sequences.

Cross-site request forgery (CSRF) vulnerability in D-Link DWR-113 (Rev. Ax) with firmware before 2.03b02 allows remote attackers to hijack the authentication of administrators for requests that change the admin password via unspecified vectors.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR-600 router (rev. Bx) with firmware before 2.17b02 allow remote attackers to hijack the authentication of administrators for requests that (1) create an administrator account or (2) enable remote management via a crafted configuration module to hedwig.cgi, (3) activate new configuration settings via a SETCFG,SAVE,ACTIVATE action to pigwidgeon.cgi, or (4) send a ping via a ping action to diagnostic.php.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP-1360 with firmware 2.5.4 and earlier allow remote attackers to hijack the authentication of unspecified users for requests that change the (1) Enable Wireless, (2) MBSSID, (3) BSSID, (4) Hide Access Point, (5) SSID, (6) Country, (7) Channel, (8) Wireless mode, or (9) Max Associated Clients setting via a crafted request to index.cgi.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP-1360 router with firmware 2.5.4 and earlier allow remote attackers to hijack the authentication of unspecified users for requests that (1) change the MAC filter restrict mode, (2) add a MAC address to the filter, or (3) remove a MAC address from the filter via a crafted request to index.cgi.

D-Link DIR-100 4.03B07: cli.cgi CSRF

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DSL-2740B Gateway with firmware EU_1.00 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or disable Wireless MAC Address Filters via a wlFltMode action to wlmacflt.cmd, (2) enable or disable firewall protections via a request to scdmz.cmd, or (3) enable or disable remote management via a save action to scsrvcntr.cmd.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR865L router (Rev. A1) with firmware before 1.05b07 allow remote attackers to hijack the authentication of administrators for requests that (1) change the administrator password or (2) enable remote management via a request to hedwig.cgi or (3) activate configuration changes via a request to pigwidgeon.cgi.

D-Link DIR-601 B1 2.00NA devices have CSRF because no anti-CSRF token is implemented. A remote attacker could exploit this in conjunction with CVE-2019-16327 to enable remote router management and device compromise. NOTE: this is an end-of-life product.

D-Link DIR-655 C devices before 3.02B05 BETA03 allow CSRF for the entire management console.

Cross-site request forgery (CSRF) vulnerability in setup/security.cgi in D-Link DCS-900, DCS-2000, and DCS-5300 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the rootpass parameter.

D-Link DCS cameras have a weak/insecure CrossDomain.XML file that allows sites hosting malicious Flash objects to access and/or change the device's settings via a CSRF attack. This is because of the 'allow-access-from domain' child element set to *, thus accepting requests from any domain. If a victim logged into the camera's web console visits a malicious site hosting a malicious Flash file from another Browser tab, the malicious Flash file then can send requests to the victim's DCS series Camera without knowing the credentials. An attacker can host a malicious Flash file that can retrieve Live Feeds or information from the victim's DCS series Camera, add new admin users, or make other changes to the device. Known affected devices are DCS-933L with firmware before 1.13.05, DCS-5030L, DCS-5020L, DCS-2530L, DCS-2630L, DCS-930L, DCS-932L, and DCS-932LB1.

On the D-Link DIR-615 before v20.12PTb04, if a victim logged in to the Router's Web Interface visits a malicious site from another Browser tab, the malicious site then can send requests to the victim's Router without knowing the credentials (CSRF). An attacker can host a page that sends a POST request to Form2File.htm that tries to upload Firmware to victim's Router. This causes the router to reboot/crash resulting in Denial of Service. An attacker may succeed in uploading malicious Firmware.

D-Link DIR-615 HW: T1 FW:20.09 is vulnerable to Cross-Site Request Forgery (CSRF) vulnerability. This enables an attacker to perform an unwanted action on a wireless router for which the user/admin is currently authenticated, as demonstrated by changing the Security option from WPA2 to None, or changing the hiddenSSID parameter, SSID parameter, or a security-option password.

Cross-site request forgery (CSRF) vulnerability in redpass.cgi in D-Link DSL-2640B Firmware EU_4.00 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the sysPassword parameter.

An issue was discovered on D-Link DCS-1130 devices. The device provides a crossdomain.xml file with no restrictions on who can access the webserver. This allows an hosted flash file on any domain to make calls to the device's webserver and pull any information that is stored on the device. In this case, user's credentials are stored in clear text on the device and can be pulled easily. It also seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site flashing attack on the user's browser and execute any action on the device provided by the web management interface which steals the credentials from tools_admin.cgi file's response and displays it inside a Textfield.

D-Link DCS-936L devices with firmware before 1.05.07 have an inadequate CSRF protection mechanism that requires the device's IP address to be a substring of the HTTP Referer header.

Cross Site Request Forgery (CSRF) on D-Link DSL-2730U C1 IN_1.00 devices allows remote attackers to change the DNS or firewall configuration or any password.

CSRF exists on D-Link DIR-600M Rev. Cx devices before v3.05ENB01_beta_20170306. This can be used to bypass authentication and insert XSS sequences or possibly have unspecified other impact.

D-Link DIR-865L Ax 1.20B01 Beta devices allow CSRF.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of changing the administrative password for the web management interface. It seems that the device does not implement any cross-site request forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface to change the user's password.

D-Link DIR-100 4.03B07: cli.cgi security bypass due to failure to check authentication parameters

D-Link DIR-601 A1 1.02NA devices do not require the old password for a password change, which occurs in cleartext.

D-Link DGS-1100 devices with Rev.B firmware 1.01.018 have a hardcoded SSL private key, which allows man-in-the-middle attackers to spoof devices by hijacking an HTTPS session.

Cross Site Request Forgery vulnerability in DLink DWR 2000M 5G CPE With Wifi 6 Ax1800 and Dlink DWR 5G CPE DWR-2000M_1.34ME allows a local attacker to obtain sensitive information via the Port forwarding option.

Multiple cross-site request forgery (CSRF) vulnerabilities on the D-Link DI-524 Wireless Router with firmware 9.01 allow remote attackers to (1) change the admin password, (2) reboot the device, or (3) possibly have unspecified other impact via crafted requests to CGI programs.

Multiple cross-site request forgery (CSRF) vulnerabilities in Oxwall before 1.8 allow remote attackers to hijack the authentication of administrators for requests that (1) put the website under maintenance via the maintenance_enable parameter or (2) conduct cross-site scripting (XSS) attacks via the maintenance_text parameter to admin/pages/maintenance.

Machform prior to version 16 is vulnerable to cross-site request forgery due to a lack of CSRF tokens in place.

Cross-site request forgery (CSRF) vulnerability on Belkin F9K1102 2 devices with firmware 2.10.17 allows remote attackers to hijack the authentication of arbitrary users.

Cross-site request forgery (CSRF) vulnerability in Web Reference Database (aka refbase) through 0.9.6 allows remote attackers to hijack the authentication of arbitrary users.

The (1) Manager and (2) Host Manager applications in Apache Tomcat 7.x before 7.0.68, 8.x before 8.0.31, and 9.x before 9.0.0.M2 establish sessions and send CSRF tokens for arbitrary new requests, which allows remote attackers to bypass a CSRF protection mechanism by using a token.

Cross-site request forgery (CSRF) vulnerability in Atlassian JIRA Enterprise Edition 3.13 allows remote attackers to hijack the authentication of unspecified victims via unknown vectors. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

Cross-site request forgery (CSRF) vulnerability in Cisco Prime Collaboration Assurance 10.5(1) and 10.6 allows remote attackers to hijack the authentication of arbitrary users, aka Bug ID CSCus62712.

Cross-site request forgery (CSRF) vulnerability in springframework-social before 1.1.3.

The redirect implementation in curl and libcurl 5.11 through 7.19.3, when CURLOPT_FOLLOWLOCATION is enabled, accepts arbitrary Location values, which might allow remote HTTP servers to (1) trigger arbitrary requests to intranet servers, (2) read or overwrite arbitrary files via a redirect to a file: URL, or (3) execute arbitrary commands via a redirect to an scp: URL.

Cross-site request forgery (CSRF) vulnerability on Cisco DPQ3925 devices with EDVA 5.5.2 allows remote attackers to hijack the authentication of arbitrary users, aka Bug ID CSCuv05943.

Cross-site request forgery (CSRF) vulnerability on Mediabridge Medialink MWN-WAPR300N devices with firmware 5.07.50 allows remote attackers to hijack the authentication of arbitrary users.

Cross-site request forgery (CSRF) vulnerability in admin/agent_edit.asp in PollPro 3.0 allows remote attackers to create or modify accounts as administrators via the username, password, and name parameters.

Cross-site request forgery (CSRF) vulnerability in wp-admin/post.php in WordPress before 4.2.4 allows remote attackers to hijack the authentication of administrators for requests that lock a post, and consequently cause a denial of service (editing blockage), via a get-post-lock action.

Cross-site request forgery (CSRF) vulnerability in the administration interface in Cisco IronPort Encryption Appliance 6.2.4 before 6.2.4.1.1, 6.2.5, 6.2.6, 6.2.7 before 6.2.7.7, 6.3 before 6.3.0.4, and 6.5 before 6.5.0.2; and Cisco IronPort PostX 6.2.1 before 6.2.1.1 and 6.2.2 before 6.2.2.3; allows remote attackers to execute commands and modify appliance preferences as arbitrary users via a logout action.

Cross-site request forgery (CSRF) vulnerability in Joomla! 3.2.0 through 3.3.x and 3.4.x before 3.4.2 allows remote attackers to hijack the authentication of unspecified victims for requests that upload code via unknown vectors.

Cross-site request forgery (CSRF) vulnerability in Cisco Unity Connection 11.5(0.98) allows remote attackers to hijack the authentication of arbitrary users, aka Bug ID CSCux24578.

Cross-site request forgery (CSRF) vulnerability in HP StoreOnce Backup system software before 3.13.1 allows remote authenticated users to hijack the authentication of unspecified victims via unknown vectors.

Cross-site request forgery (CSRF) vulnerability in eXtplorer before 2.1.8 allows remote attackers to hijack the authentication of arbitrary users for requests that execute PHP code.

A vulnerability in the web-based management interface of Cisco IOS XE New Generation Wireless Controller (NGWC) could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform arbitrary actions on an affected device by using a web browser and with the privileges of the user.

Cross-site request forgery (CSRF) vulnerability in form2WlanSetup.cgi on Philippine Long Distance Telephone (PLDT) SpeedSurf 504AN devices with firmware GAN9.8U26-4-TX-R6B018-PH.EN and Kasda KW58293 devices allows remote attackers to hijack the authentication of administrators for requests that perform setup operations, as demonstrated by modifying network settings.

Cross-site request forgery (CSRF) vulnerability in Cisco TelePresence Server software 3.0(2.24) allows remote attackers to hijack the authentication of arbitrary users, aka Bug IDs CSCut63718, CSCut63724, and CSCut63760.