Stack-based buffer overflow in the RuntimeDiagnosticPing function in /bin/webs on D-Link DIR-100 routers might allow remote authenticated administrators to execute arbitrary commands via a long set/runtime/diagnostic/pingIp parameter to Tools/tools_misc.xgi.

An issue was discovered on D-Link DCS-1130 devices. The device provides a crossdomain.xml file with no restrictions on who can access the webserver. This allows an hosted flash file on any domain to make calls to the device's webserver and pull any information that is stored on the device. In this case, user's credentials are stored in clear text on the device and can be pulled easily. It also seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site flashing attack on the user's browser and execute any action on the device provided by the web management interface which steals the credentials from tools_admin.cgi file's response and displays it inside a Textfield.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DSL-2740B Gateway with firmware EU_1.00 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or disable Wireless MAC Address Filters via a wlFltMode action to wlmacflt.cmd, (2) enable or disable firewall protections via a request to scdmz.cmd, or (3) enable or disable remote management via a save action to scsrvcntr.cmd.

CSRF exists on D-Link DIR-600M Rev. Cx devices before v3.05ENB01_beta_20170306. This can be used to bypass authentication and insert XSS sequences or possibly have unspecified other impact.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR865L router (Rev. A1) with firmware before 1.05b07 allow remote attackers to hijack the authentication of administrators for requests that (1) change the administrator password or (2) enable remote management via a request to hedwig.cgi or (3) activate configuration changes via a request to pigwidgeon.cgi.

Cross-site request forgery (CSRF) vulnerability in redpass.cgi in D-Link DSL-2640B Firmware EU_4.00 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the sysPassword parameter.

Cross Site Request Forgery vulnerability in DLink DWR 2000M 5G CPE With Wifi 6 Ax1800 and Dlink DWR 5G CPE DWR-2000M_1.34ME allows a local attacker to obtain sensitive information via the Port forwarding option.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP 1150 with firmware 1.2.94 allow remote attackers to hijack the authentication of administrators for requests that (1) enable or (2) disable the DMZ in the Firewall/DMZ section via a request to index.cgi or (3) add, (4) modify, or (5) delete URL-filter settings in the Control/URL-filter section via a request to index.cgi, as demonstrated by adding a rule that blocks access to google.com.

D-Link DIR-601 B1 2.00NA devices have CSRF because no anti-CSRF token is implemented. A remote attacker could exploit this in conjunction with CVE-2019-16327 to enable remote router management and device compromise. NOTE: this is an end-of-life product.

D-Link DIR-655 C devices before 3.02B05 BETA03 allow CSRF for the entire management console.

Multiple cross-site request forgery (CSRF) vulnerabilities in the D-Link DSL-6740U gateway (Rev. H1) allow remote attackers to hijack the authentication of administrators for requests that change administrator credentials or enable remote management services to (1) Custom Services in Port Forwarding, (2) Port Triggering Entries, (3) URL Filters in Parental Control, (4) Print Server settings, (5) QoS Queue Setup, or (6) QoS Classification Entries.

On the D-Link DIR-615 before v20.12PTb04, if a victim logged in to the Router's Web Interface visits a malicious site from another Browser tab, the malicious site then can send requests to the victim's Router without knowing the credentials (CSRF). An attacker can host a page that sends a POST request to Form2File.htm that tries to upload Firmware to victim's Router. This causes the router to reboot/crash resulting in Denial of Service. An attacker may succeed in uploading malicious Firmware.

D-Link DCS cameras have a weak/insecure CrossDomain.XML file that allows sites hosting malicious Flash objects to access and/or change the device's settings via a CSRF attack. This is because of the 'allow-access-from domain' child element set to *, thus accepting requests from any domain. If a victim logged into the camera's web console visits a malicious site hosting a malicious Flash file from another Browser tab, the malicious Flash file then can send requests to the victim's DCS series Camera without knowing the credentials. An attacker can host a malicious Flash file that can retrieve Live Feeds or information from the victim's DCS series Camera, add new admin users, or make other changes to the device. Known affected devices are DCS-933L with firmware before 1.13.05, DCS-5030L, DCS-5020L, DCS-2530L, DCS-2630L, DCS-930L, DCS-932L, and DCS-932LB1.

Cross Site Request Forgery (CSRF) on D-Link DSL-2730U C1 IN_1.00 devices allows remote attackers to change the DNS or firewall configuration or any password.

CSRF exists on D-Link DIR-868L devices, leading to (for example) a change to the Admin password. hedwig.cgi and pigwidgeon.cgi are two of the affected components.

Multiple cross-site request forgery (CSRF) vulnerabilities in the D-Link DIR-816L Wireless Router with firmware before 2.06.B09_BETA allow remote attackers to hijack the authentication of administrators for requests that (1) change the admin password, (2) change the network policy, or (3) possibly have other unspecified impact via crafted requests to hedwig.cgi and pigwidgeon.cgi.

Cross-site request forgery (CSRF) vulnerability in D-Link DIR-815 devices with firmware before 2.07.B01 allows remote attackers to hijack the authentication of arbitrary users for requests that insert XSS sequences.

Cross-site request forgery (CSRF) vulnerability in D-Link DWR-113 (Rev. Ax) with firmware before 2.03b02 allows remote attackers to hijack the authentication of administrators for requests that change the admin password via unspecified vectors.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR-600 router (rev. Bx) with firmware before 2.17b02 allow remote attackers to hijack the authentication of administrators for requests that (1) create an administrator account or (2) enable remote management via a crafted configuration module to hedwig.cgi, (3) activate new configuration settings via a SETCFG,SAVE,ACTIVATE action to pigwidgeon.cgi, or (4) send a ping via a ping action to diagnostic.php.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP-1360 router with firmware 2.5.4 and earlier allow remote attackers to hijack the authentication of unspecified users for requests that (1) change the MAC filter restrict mode, (2) add a MAC address to the filter, or (3) remove a MAC address from the filter via a crafted request to index.cgi.

Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DAP-1360 with firmware 2.5.4 and earlier allow remote attackers to hijack the authentication of unspecified users for requests that change the (1) Enable Wireless, (2) MBSSID, (3) BSSID, (4) Hide Access Point, (5) SSID, (6) Country, (7) Channel, (8) Wireless mode, or (9) Max Associated Clients setting via a crafted request to index.cgi.

Cross-site request forgery (CSRF) vulnerability in D-Link DAP-2253 Access Point (Rev. A1) with firmware before 1.30 allows remote attackers to hijack the authentication of administrators for requests that modify configuration settings via unspecified vectors.

D-Link DIR-100 4.03B07: cli.cgi CSRF

Cross-site request forgery (CSRF) vulnerability in setup/security.cgi in D-Link DCS-900, DCS-2000, and DCS-5300 allows remote attackers to hijack the authentication of administrators for requests that change the administrator password via the rootpass parameter.

D-Link DIR-865L Ax 1.20B01 Beta devices allow CSRF.

Cross-site request forgery (CSRF) vulnerability in D-Link DCS-931L with firmware 1.04 and earlier allows remote attackers to hijack the authentication of unspecified victims via unknown vectors.

D-Link DIR-615 HW: T1 FW:20.09 is vulnerable to Cross-Site Request Forgery (CSRF) vulnerability. This enables an attacker to perform an unwanted action on a wireless router for which the user/admin is currently authenticated, as demonstrated by changing the Security option from WPA2 to None, or changing the hiddenSSID parameter, SSID parameter, or a security-option password.

D-Link DCS-936L devices with firmware before 1.05.07 have an inadequate CSRF protection mechanism that requires the device's IP address to be a substring of the HTTP Referer header.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of changing the administrative password for the web management interface. It seems that the device does not implement any cross-site request forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface to change the user's password.

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of blocking IP addresses using the web management interface. It seems that the device does not implement any cross-site scripting forgery protection mechanism which allows an attacker to trick a user who is logged in to the web management interface into executing a cross-site scripting payload on the user's browser and execute any action on the device provided by the web management interface.

Cross-Site Request Forgery (CSRF) in the Basic Settings screen on Vonage (Grandstream) HT802 devices allows attackers to modify settings, related to cgi-bin/update.

Cross-Site Request Forgery (CSRF) vulnerability via IMG element in Tiki before 16.3, 17.x before 17.1, 12 LTS before 12.12 LTS, and 15 LTS before 15.5 LTS allows an authenticated user to edit global permissions if an administrator opens a wiki page with an IMG element, related to tiki-objectpermissions.php. For example, an attacker could assign administrator privileges to every unauthenticated user of the site.

Cross-Site Request Forgery (CSRF) vulnerability via IMG element in Tiki before 16.3, 17.x before 17.1, 12 LTS before 12.12 LTS, and 15 LTS before 15.5 LTS allows an authenticated user to gain administrator privileges if an administrator opens a wiki page with an IMG element, related to tiki-assignuser.php.

Cross-site request forgery (CSRF) vulnerability in ZKTeco ZKTime Web 2.0.1.12280 allows remote authenticated users to hijack the authentication of administrators for requests that add administrators by leveraging lack of anti-CSRF tokens.

Multiple cross-site request forgery (CSRF) vulnerabilities in Koha 3.14.x before 3.14.16, 3.16.x before 3.16.12, 3.18.x before 3.18.08, and 3.20.x before 3.20.1 allow remote attackers to (1) hijack the authentication of administrators for requests that create a user via a request to members/memberentry.pl or (2) give a user superlibrarian permission via a request to members/member-flags.pl or (3) hijack the authentication of arbitrary users for requests that conduct cross-site scripting (XSS) attacks via the addshelf parameter to opac-shelves.pl.

A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface of the affected device. An attacker could exploit this vulnerability by persuading a user to follow a malicious link. A successful exploit could allow the attacker to use a web browser and the privileges of the user to perform arbitrary actions on the affected device.

An issue was discovered in Dolibarr 11.0.0-alpha. A user can store an IFRAME element (containing a user/card.php CSRF request) in his Linked Files settings page. When visited by the admin, this could completely take over the admin account. (The protection mechanism for CSRF is to check the Referer header; however, because the attack is from one of the application's own settings pages, this mechanism is bypassed.)

Vanilla Forums below 2.1.5 are affected by CSRF leading to Deleting topics and comments from forums Admin access

A vulnerability in open-webui/open-webui versions <= 0.3.8 allows remote code execution by non-admin users via Cross-Site Request Forgery (CSRF). The application uses cookies with the SameSite attribute set to lax for authentication and lacks CSRF tokens. This allows an attacker to craft a malicious HTML that, when accessed by a victim, can modify the Python code of an existing pipeline and execute arbitrary code with the victim's privileges.

Ubiquiti Networks EdgeOS version 1.9.1 and prior suffer from a Cross-Site Request Forgery (CSRF) vulnerability. An attacker with access to an operator (read-only) account could lure an admin (root) user to access the attacker-controlled page, allowing the attacker to gain admin privileges in the system.

A cross-site request forgery vulnerability in Jenkins GitLab Plugin 1.5.11 and earlier in the GitLabConnectionConfig#doTestConnection form validation method allowed attackers to connect to an attacker-specified URL using attacker-specified credentials IDs obtained through another method, capturing credentials stored in Jenkins.

GNU Mailman before 2.1.35 may allow remote Privilege Escalation. A csrf_token value is not specific to a single user account. An attacker can obtain a value within the context of an unprivileged user account, and then use that value in a CSRF attack against an admin (e.g., for account takeover).

IBM Sterling Order Management 9.2 through 9.5 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM X-Force ID: 121314.

Cross-site request forgery (CSRF) vulnerability in the Mailer Plugin 1.20 for Jenkins 2.111 allows remote authenticated users to send unauthorized mail as an arbitrary user via a /descriptorByName/hudson.tasks.Mailer/sendTestMail request.

A CSRF vulnerability in Brocade Virtual Traffic Manager versions released prior to and including 11.0 could allow an attacker to trick a logged-in user into making administrative changes on the traffic manager cluster.

A Cross-Site Request Forgery (CSRF) vulnerability in HPE Version Control Repository Manager (VCRM) was found. The problem impacts all versions prior to 7.6.

Cross-site request forgery (CSRF) vulnerability in esop/toolkit/profile/regData.do in Bravo Tejari Procurement Portal allows remote authenticated users to hijack the authentication of application users for requests that modify their personal data by leveraging lack of anti-CSRF tokens.

Cross-Site Request Forgery (CSRF) vulnerability in GLPI 0.90.4 allows remote authenticated attackers to submit a request that could lead to the creation of an admin account in the application.

Cross-site request forgery (CSRF) vulnerability in CMS Made Simple before 2.1.6 allows remote attackers to hijack the authentication of administrators for requests that create accounts via an admin/adduser.php request.

PHP Scripts Mall advanced-real-estate-script 4.0.9 has CSRF via edit-profile.php.