A vulnerability was found in Tenda AC18 15.03.05.05. It has been rated as critical. This issue affects the function formSetPPTPUserList of the file /goform/setPptpUserList. The manipulation of the argument list leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in Tenda AC18 15.03.05.05. Affected by this vulnerability is the function fromadvsetlanip of the file /goform/AdvSetLanip. The manipulation of the argument lanMask leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in TOTOLINK X15 1.0.0-B20230714.1105. This affects the function formMapReboot of the file /boafrm/formMapReboot. The manipulation of the argument deviceMacAddr leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Tenda AC10 up to 15.03.06.47. This affects the function formSetPPTPServer of the file /goform/SetPptpServerCfg of the component HTTP Handler. The manipulation of the argument startIp/endIp leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

Multiple vulnerabilities in the web-based management interface of the Cisco RV110W Wireless-N VPN Firewall, RV130 VPN Router, RV130W Wireless-N Multifunction VPN Router, and RV215W Wireless-N VPN Router could allow an authenticated, remote attacker to execute arbitrary code on an affected device. The vulnerabilities are due to improper validation of user-supplied data in the web-based management interface. An attacker could exploit these vulnerabilities by sending malicious HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device as a high-privilege user.

A vulnerability was found in Tenda RX3 16.03.13.11_multi_TDE01. It has been rated as critical. This issue affects the function save_staticroute_data of the file /goform/SetStaticRouteCfg. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. Affected by this vulnerability is the function setSystemEmail of the file /setSystemEmail. The manipulation of the argument EmailSMTPPortNumber leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in Tenda CH22 1.0.0.1. This affects the function formNatlimit of the file /goform/Natlimit. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in TOTOLINK N302R Plus up to 3.4.0-B20201028. Affected is an unknown function of the file /boafrm/formPortFw of the component HTTP POST Request Handler. The manipulation of the argument service_type leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A stack buffer overflow flaw was found in the Quick Emulator (QEMU) before 2.9 built with the Network Block Device (NBD) client support. The flaw could occur while processing server's response to a 'NBD_OPT_LIST' request. A malicious NBD server could use this issue to crash a remote NBD client resulting in DoS or potentially execute arbitrary code on client host with privileges of the QEMU process.

A buffer overflow vulnerability in "Add command" functionality exists in Flexense SyncBreeze Enterprise <= 10.3.14. The vulnerability can be triggered by an authenticated attacker who submits more than 5000 characters as the command name. It will cause termination of the SyncBreeze Enterprise server and possibly remote command execution with SYSTEM privilege.

The RandR extension in XFree86 4.2.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) SProcRRQueryVersion, (2) SProcRRGetScreenInfo, (3) SProcRRSelectInput, or (4) SProcRRConfigureOutputProperty function.

The DBE extension in X.Org X Window System (aka X11 or X) X11R6.1 and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) ProcDbeSwapBuffers or (2) SProcDbeSwapBuffers function.

Apache PLC4X - PLC4C (Only the C language implementation was effected) was vulnerable to an unsigned integer underflow flaw inside the tcp transport. Users should update to 0.9.1, which addresses this issue. However, in order to exploit this vulnerability, a user would have to actively connect to a mallicious device which could send a response with invalid content. Currently we consider the probability of this being exploited as quite minimal, however this could change in the future, especially with the industrial networks growing more and more together.

Multiple stack-based buffer overflows in PostgreSQL before 8.4.20, 9.0.x before 9.0.16, 9.1.x before 9.1.12, 9.2.x before 9.2.7, and 9.3.x before 9.3.3 allow remote authenticated users to cause a denial of service (crash) or possibly execute arbitrary code via vectors related to an incorrect MAXDATELEN constant and datetime values involving (1) intervals, (2) timestamps, or (3) timezones, a different vulnerability than CVE-2014-0065.

Multiple buffer overflows in PostgreSQL before 8.4.20, 9.0.x before 9.0.16, 9.1.x before 9.1.12, 9.2.x before 9.2.7, and 9.3.x before 9.3.3 allow remote authenticated users to have unspecified impact and attack vectors, a different vulnerability than CVE-2014-0063.

X.Org Server (aka xserver and xorg-server) 1.15.0 through 1.16.x before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) sproc_dri3_query_version, (2) sproc_dri3_open, (3) sproc_dri3_pixmap_from_buffer, (4) sproc_dri3_buffer_from_pixmap, (5) sproc_dri3_fence_from_fd, (6) sproc_dri3_fd_from_fence, (7) proc_present_query_capabilities, (8) sproc_present_query_version, (9) sproc_present_pixmap, (10) sproc_present_notify_msc, (11) sproc_present_select_input, or (12) sproc_present_query_capabilities function in the (a) DRI3 or (b) Present extension.

Use of Out-of-range Pointer Offset in GitHub repository vim/vim prior to 8.2.4440.

Multiple stack-based buffer overflows in Icinga before 1.8.5, 1.9 before 1.9.4, and 1.10 before 1.10.2 allow remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a long string to the (1) display_nav_table, (2) page_limit_selector, (3) print_export_link, or (4) page_num_selector function in cgi/cgiutils.c; (5) status_page_num_selector function in cgi/status.c; or (6) display_command_expansion function in cgi/config.c. NOTE: this can be exploited without authentication by leveraging CVE-2013-7107.

The SProcXFixesSelectSelectionInput function in the XFixes extension in X.Org X Window System (aka X11 or X) X11R6.8.0 and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length value.

Multiple stack-based buffer overflows in the ServerView web interface (SnmpGetMibValues.exe) in Fujitsu Siemens Computers ServerView 04.60.07 and earlier allow remote authenticated users to execute arbitrary code via a crafted URL.

In Tensorflow version 2.3.0, the `SparseCountSparseOutput` and `RaggedCountSparseOutput` implementations don't validate that the `weights` tensor has the same shape as the data. The check exists for `DenseCountSparseOutput`, where both tensors are fully specified. In the sparse and ragged count weights are still accessed in parallel with the data. But, since there is no validation, a user passing fewer weights than the values for the tensors can generate a read from outside the bounds of the heap buffer allocated for the weights. The issue is patched in commit 3cbb917b4714766030b28eba9fb41bb97ce9ee02 and is released in TensorFlow version 2.3.1.

An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'read' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'read <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the implementation of `SparseFillEmptyRowsGrad` uses a double indexing pattern. It is possible for `reverse_index_map(i)` to be an index outside of bounds of `grad_values`, thus resulting in a heap buffer overflow. The issue is patched in commit 390611e0d45c5793c7066110af37c8514e6a6c54, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

The GLX extension in XFree86 4.0, X.Org X Window System (aka X11 or X) X11R6.7, and X.Org Server (aka xserver and xorg-server) before 1.16.3 allows remote authenticated users to cause a denial of service (out-of-bounds read or write) or possibly execute arbitrary code via a crafted length or index value to the (1) __glXDisp_Render, (2) __glXDisp_RenderLarge, (3) __glXDispSwap_VendorPrivate, (4) __glXDispSwap_VendorPrivateWithReply, (5) set_client_info, (6) __glXDispSwap_SetClientInfoARB, (7) DoSwapInterval, (8) DoGetProgramString, (9) DoGetString, (10) __glXDispSwap_RenderMode, (11) __glXDisp_GetCompressedTexImage, (12) __glXDispSwap_GetCompressedTexImage, (13) __glXDisp_FeedbackBuffer, (14) __glXDispSwap_FeedbackBuffer, (15) __glXDisp_SelectBuffer, (16) __glXDispSwap_SelectBuffer, (17) __glXDisp_Flush, (18) __glXDispSwap_Flush, (19) __glXDisp_Finish, (20) __glXDispSwap_Finish, (21) __glXDisp_ReadPixels, (22) __glXDispSwap_ReadPixels, (23) __glXDisp_GetTexImage, (24) __glXDispSwap_GetTexImage, (25) __glXDisp_GetPolygonStipple, (26) __glXDispSwap_GetPolygonStipple, (27) __glXDisp_GetSeparableFilter, (28) __glXDisp_GetSeparableFilterEXT, (29) __glXDisp_GetConvolutionFilter, (30) __glXDisp_GetConvolutionFilterEXT, (31) __glXDisp_GetHistogram, (32) __glXDisp_GetHistogramEXT, (33) __glXDisp_GetMinmax, (34) __glXDisp_GetMinmaxEXT, (35) __glXDisp_GetColorTable, (36) __glXDisp_GetColorTableSGI, (37) GetSeparableFilter, (38) GetConvolutionFilter, (39) GetHistogram, (40) GetMinmax, or (41) GetColorTable function.

Buffer overflow in certain client utilities in OpenAFS before 1.6.2 allows remote authenticated users to cause a denial of service (crash) and possibly execute arbitrary code via a long fileserver ACL entry.

Buffer overflow in Aterm HC100RC Ver1.0.1 and earlier allows attacker with administrator rights to execute arbitrary code via tools_system.cgi date parameter, time parameter, and offset parameter.

A vulnerability was found in H3C GR-5400AX up to 100R008 and classified as critical. Affected by this issue is the function EditWlanMacList of the file /routing/goform/aspForm. The manipulation of the argument param leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A stack buffer overflow vulnerability has been discovered in Microsoft Skype 7.2, 7.35, and 7.36 before 7.37, involving MSFTEDIT.DLL mishandling of remote RDP clipboard content within the message box.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "request_image" as one of the service actions for a normal user to retrieve an image from a camera that is controlled by the controller. It seems that the "URL" parameter passed in the query string is not sanitized and is stored on the stack which allows an attacker to overflow the buffer. The function "LU::Generic_IP_Camera_Manager::REQ_Image" is activated when the lu_request_image is passed as the "id" parameter in query string. This function then calls "LU::Generic_IP_Camera_Manager::GetUrlFromArguments" and passes a "pointer" to the function where it will be allowed to store the value from the URL parameter. This pointer is passed as the second parameter $a2 to the function "LU::Generic_IP_Camera_Manager::GetUrlFromArguments". However, neither the callee or the caller in this case performs a simple length check and as a result an attacker who is able to send more than 1336 characters can easily overflow the values stored on the stack including the $RA value and thus execute code on the device.

A vulnerability classified as critical has been found in Tenda FH451 1.0.0.9. Affected is the function webExcptypemanFilter of the file /goform/webExcptypemanFilter. The manipulation of the argument page leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Stack-based buffer overflow in the receive_tcppacket function in net_packet.c in tinc before 1.0.21 and 1.1 before 1.1pre7 allows remote authenticated peers to cause a denial of service (crash) or possibly execute arbitrary code via a large TCP packet.

A vulnerability classified as critical has been found in D-Link DCS-5020L 1.01_B2. This affects the function websReadEvent of the file /rame/ptdc.cgi. The manipulation of the argument Authorization leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in Tenda AC10 16.03.10.13 and classified as critical. Affected by this issue is some unknown functionality of the file /goform/UserCongratulationsExec. The manipulation of the argument getuid leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. Affected by this vulnerability is the function sub_40BE30 of the file /boafrm/formStats of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615 and classified as critical. This issue affects some unknown processing of the file /boafrm/formNtp of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered on Vera VeraEdge 1.7.19 and Veralite 1.7.481 devices. The device provides UPnP services that are available on port 3480 and can also be accessed via port 80 using the url "/port_3480". It seems that the UPnP services provide "request_image" as one of the service actions for a normal user to retrieve an image from a camera that is controlled by the controller. It seems that the "res" (resolution) parameter passed in the query string is not sanitized and is stored on the stack which allows an attacker to overflow the buffer. The function "LU::Generic_IP_Camera_Manager::REQ_Image" is activated when the lu_request_image is passed as the "id" parameter in the query string. This function then calls "LU::Generic_IP_Camera_Manager::GetUrlFromArguments". This function retrieves all the parameters passed in the query string including "res" and then uses the value passed in it to fill up buffer using the sprintf function. However, the function in this case lacks a simple length check and as a result an attacker who is able to send more than 184 characters can easily overflow the values stored on the stack including the $RA value and thus execute code on the device.

A vulnerability classified as critical has been found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. This affects an unknown part of the file /boafrm/formWsc of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been classified as critical. This affects the function SubUPnPCSInit of the file /sbin/udev. The manipulation of the argument CameraName leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been declared as critical. This vulnerability affects the function isUCPCameraNameChanged of the file /sbin/ucp. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. It has been rated as critical. Affected by this issue is the function submit-url of the file /boafrm/formReflashClientTbl of the component HTTP POST Request Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Tenda A15 15.13.07.09/15.13.07.13. It has been classified as critical. This affects an unknown part of the file /goform/multimodalAdd of the component HTTP POST Request Handler. The manipulation leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, has been found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. Affected by this issue is some unknown functionality of the file /boafrm/formSysCmd of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

On Insteon Hub 2245-222 devices with firmware version 1012, specially crafted replies received from the PubNub service can cause buffer overflows on a global section overwriting arbitrary data. An attacker should impersonate PubNub and answer an HTTPS GET request to trigger this vulnerability. A strcpy overflows the buffer insteon_pubnub.channel_ak, which has a size of 16 bytes. An attacker can send an arbitrarily long "ak" parameter in order to exploit this vulnerability.

A vulnerability classified as critical was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. This vulnerability affects unknown code of the file /boafrm/formDMZ of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. It has been classified as critical. Affected is an unknown function of the file /boafrm/formSetLg of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. Affected is an unknown function of the file /boafrm/formSaveConfig of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Vyper is a Pythonic Smart Contract Language for the EVM. In affected versions when performing a function call inside a literal struct, there is a memory corruption issue that occurs because of an incorrect pointer to the the top of the stack. This issue has been resolved in version 0.3.0.

A vulnerability was found in D-Link DCS-932L 2.18.01 and classified as critical. Affected by this issue is the function sub_404780 of the file /bin/gpio. The manipulation of the argument CameraName leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, was found in TOTOLINK A702R, A3002R and A3002RU 3.0.0-B20230809.1615. This affects an unknown part of the file /boafrm/formSiteSurveyProfile of the component HTTP POST Request Handler. The manipulation of the argument submit-url leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.