A user controlled parameter used in video call in WhatsApp for Android prior to v2.20.17, WhatsApp Business for Android prior to v2.20.7, WhatsApp for iPhone prior to v2.20.20, and WhatsApp Business for iPhone prior to v2.20.20 could have allowed an out-of-bounds write on 32-bit devices.
A stack overflow in WhatsApp for Android prior to v2.20.196.16, WhatsApp Business for Android prior to v2.20.196.12, WhatsApp for iOS prior to v2.20.90, WhatsApp Business for iOS prior to v2.20.90, and WhatsApp for Portal prior to v173.0.0.29.505 could have allowed arbitrary code execution when parsing the contents of an RTP Extension header.
Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.
An issue was discovered in uIP 1.0, as used in Contiki 3.0 and other products. The code that reassembles fragmented packets fails to properly validate the total length of an incoming packet specified in its IP header, as well as the fragmentation offset value specified in the IP header. By crafting a packet with specific values of the IP header length and the fragmentation offset, attackers can write into the .bss section of the program (past the statically allocated buffer that is used for storing the fragmented data) and cause a denial of service in uip_reass() in uip.c, or possibly execute arbitrary code on some target architectures.
An issue was discovered in NeoMutt before 2018-07-16. nntp_add_group in newsrc.c has a stack-based buffer overflow because of incorrect sscanf usage.
A vulnerability, which was classified as critical, has been found in GPAC 2.3-DEV-rev40-g3602a5ded. This issue affects the function mp3_dmx_process of the file filters/reframe_mp3.c. The manipulation leads to heap-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-221087.
OpenConnect VPN client with GnuTLS before 5.02 contains a heap overflow if MTU is increased on reconnection.
In nDPI through 3.2, there is a stack overflow in extractRDNSequence in lib/protocols/tls.c.
An issue was discovered in the client side of Zoho ManageEngine Desktop Central 10.0.552.W. An attacker-controlled server can trigger an integer overflow in InternetSendRequestEx and InternetSendRequestByBitrate that leads to a heap-based buffer overflow and Remote Code Execution with SYSTEM privileges. This issue will occur only when untrusted communication is initiated with server. In cloud, Agent will always connect with trusted communication.
An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.
Heap-based buffer overflow in the SvrAppendReceivedChunk function in xlsasink.dll in the SMTP service of Exchange Server 2000 and 2003 allows remote attackers to execute arbitrary code via a crafted X-LINK2STATE extended verb request to the SMTP port.
In TensorFlow Lite before versions 2.2.1 and 2.3.1, models using segment sum can trigger writes outside of bounds of heap allocated buffers by inserting negative elements in the segment ids tensor. Users having access to `segment_ids_data` can alter `output_index` and then write to outside of `output_data` buffer. This might result in a segmentation fault but it can also be used to further corrupt the memory and can be chained with other vulnerabilities to create more advanced exploits. The issue is patched in commit 204945b19e44b57906c9344c0d00120eeeae178a and is released in TensorFlow versions 2.2.1, or 2.3.1. A potential workaround would be to add a custom `Verifier` to the model loading code to ensure that the segment ids are all positive, although this only handles the case when the segment ids are stored statically in the model. A similar validation could be done if the segment ids are generated at runtime between inference steps. If the segment ids are generated as outputs of a tensor during inference steps, then there are no possible workaround and users are advised to upgrade to patched code.
In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, when determining the common dimension size of two tensors, TFLite uses a `DCHECK` which is no-op outside of debug compilation modes. Since the function always returns the dimension of the first tensor, malicious attackers can craft cases where this is larger than that of the second tensor. In turn, this would result in reads/writes outside of bounds since the interpreter will wrongly assume that there is enough data in both tensors. The issue is patched in commit 8ee24e7949a203d234489f9da2c5bf45a7d5157d, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.
A vulnerability, which was classified as critical, has been found in FreeFloat FTP Server 1.0. Affected by this issue is some unknown functionality of the component LCD Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A memory corruption issue was found in Artifex Ghostscript 9.50 and 9.52. Use of a non-standard PostScript operator can allow overriding of file access controls. The 'rsearch' calculation for the 'post' size resulted in a size that was too large, and could underflow to max uint32_t. This was fixed in commit 5d499272b95a6b890a1397e11d20937de000d31b.
Mozilla developers and community members reported memory safety bugs present in Firefox 81 and Firefox ESR 78.3. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox ESR < 78.4, Firefox < 82, and Thunderbird < 78.4.
nsak64.sys in Norman Malware Cleaner 2.08.08 allows users to call arbitrary kernel functions because the passing of function pointers between user and kernel mode is mishandled.
Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. Functions parsing the OIDs in SNMP requests lack sufficient allocated target-buffer capacity verification when writing parsed OID values. The function snmp_oid_decode_oid() may overwrite memory areas beyond the provided target buffer, when called from snmp_message_decode() upon an SNMP request reception. Because the content of the write operations is externally provided in the SNMP requests, it enables a remote overwrite of an IoT device's memory regions beyond the allocated buffer. This overflow may allow remote overwrite of stack and statically allocated variables memory regions by sending a crafted SNMP request.
Stack-based buffer overflow vulnerability in Vigor3900, Vigor2960, and Vigor300B with firmware before 1.5.1.1.
A memory corruption vulnerability is present in bspatch as shipped in Colin Percival’s bsdiff tools version 4.3. Insufficient checks when handling external inputs allows an attacker to bypass the sanity checks in place and write out of a dynamically allocated buffer boundaries.
In FreeBSD 12.1-STABLE before r357213, 12.1-RELEASE before 12.1-RELEASE-p2, 12.0-RELEASE before 12.0-RELEASE-p13, 11.3-STABLE before r357214, and 11.3-RELEASE before 11.3-RELEASE-p6, URL handling in libfetch with URLs containing username and/or password components is vulnerable to a heap buffer overflow allowing program misbehavior or malicious code execution.
Heap-based buffer overflow in dnsmasq before 2.78 allows remote attackers to cause a denial of service (crash) or execute arbitrary code via a crafted DNS response.
A global buffer overflow was discovered in the iteration_loop function in loop.c in BladeEnc version 0.94.2. The vulnerability causes an out-of-bounds write, which leads to remote denial of service or possibly code execution.
In msm_ispif_config_stereo() in Android for MSM, Firefox OS for MSM, and QRD Android before 2017-06-21, the parameter params->entries[i].vfe_intf comes from userspace without any bounds check which could potentially result in a kernel out-of-bounds write.
In avrc_ctrl_pars_vendor_rsp of bluetooth avrcp_ctrl, there is a possible out of bounds write on the stack due to a missing bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-71603410.
In wl_get_assoc_ies of wl_cfg80211.c, there is a possible out of bounds write due to an incorrect bounds check. This could lead to remote code execution with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android kernel. Android ID: A-70722061. References: B-V2018010201.
Heap-based Buffer Overflow in GitHub repository strukturag/libde265 prior to and including 1.0.8. The fix is established in commit 8e89fe0e175d2870c39486fdd09250b230ec10b8 but does not yet belong to an official release.
Valve's Game Networking Sockets prior to version v1.2.0 improperly handles long encrypted messages in function AES_GCM_DecryptContext::Decrypt() when compiled using libsodium, leading to a Stack-Based Buffer Overflow and resulting in a memory corruption and possibly even a remote code execution.
In SvoxSsmlParser and startElement of svox_ssml_parser.cpp, there is a possible out of bounds write due to an uninitialized buffer. This could lead to remote code execution in an unprivileged process with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0, 8.1. Android ID: A-69177126.
The parser_yyerror function in the UTF-8 parser in Ruby 2.4.1 allows attackers to cause a denial of service (invalid write or read) or possibly have unspecified other impact via a crafted Ruby script, related to the parser_tokadd_utf8 function in parse.y. NOTE: this might have security relevance as a bypass of a $SAFE protection mechanism.
avcodec 2.2.x, as used in VideoLAN VLC media player 2.2.7-x before 2017-06-29, allows out-of-bounds heap memory write due to calling memcpy() with a wrong size, leading to a denial of service (application crash) or possibly code execution.
An FR-GV-301 issue in FreeRADIUS 3.x before 3.0.15 allows "Write overflow in data2vp_wimax()" - this allows remote attackers to cause a denial of service (daemon crash) or possibly execute arbitrary code.
A remote code execution vulnerability in the Broadcom Wi-Fi firmware could enable a remote attacker to execute arbitrary code within the context of the Wi-Fi SoC. This issue is rated as Critical due to the possibility of remote code execution in the context of the Wi-Fi SoC. Product: Android. Versions: Kernel-3.10, Kernel-3.18. Android ID: A-34199105. References: B-RB#110814.
An out-of-bounds write vulnerability exists in the OpenImageIO::add_exif_item_to_spec functionality of OpenImageIO Project OpenImageIO v2.4.4.2. Specially-crafted exif metadata can lead to stack-based memory corruption. An attacker can provide a malicious file to trigger this vulnerability.
A heap-based buffer overflow vulnerability exists in the m2m DELETE_FILE cmd functionality of Siretta QUARTZ-GOLD G5.0.1.5-210720-141020. A specially-crafted network request can lead to a heap buffer overflow. An attacker can send a network request to trigger this vulnerability.
A heap based buffer overflow vulnerability exists in the PSD thumbnail resource parsing code of OpenImageIO 2.3.19.0. A specially-crafted PSD file can lead to arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.
Bro before Bro v2.5.2 is vulnerable to an out of bounds write in the ContentLine analyzer allowing remote attackers to cause a denial of service (crash) and possibly other exploitation.
A heap based buffer overflow vulnerability exists in tile decoding code of TIFF image parser in OpenImageIO master-branch-9aeece7a and v2.3.19.0. A specially-crafted TIFF file can lead to an out of bounds memory corruption, which can result in arbitrary code execution. An attacker can provide a malicious file to trigger this vulnerability.
tools/tiffcp.c in libtiff 4.0.6 has an out-of-bounds write on tiled images with odd tile width versus image width. Reported as MSVR 35103, aka "cpStripToTile heap-buffer-overflow."
tools/tiffcrop.c in libtiff 4.0.6 has out-of-bounds write vulnerabilities in buffers. Reported as MSVR 35093, MSVR 35096, and MSVR 35097.
tools/tiff2pdf.c in libtiff 4.0.6 has out-of-bounds write vulnerabilities in heap allocated buffers in t2p_process_jpeg_strip(). Reported as MSVR 35098, aka "t2p_process_jpeg_strip heap-buffer-overflow."
A code execution vulnerability exists in the DDS scanline parsing functionality of OpenImageIO Project OpenImageIO v2.4.4.2. A specially-crafted .dds can lead to a heap buffer overflow. An attacker can provide a malicious file to trigger this vulnerability.
The XRenderQueryFilters function in X.org libXrender before 0.9.10 allows remote X servers to trigger out-of-bounds write operations via vectors involving filter name lengths.
An exploitable stack-based buffer overflow vulnerability exists in the querying functionality of Aerospike Database Server 3.10.0.3. A specially crafted packet can cause a stack-based buffer overflow in the function as_sindex__simatch_list_by_set_binid resulting in remote code execution. An attacker can simply connect to the port to trigger this vulnerability.
The XGetImage function in X.org libX11 before 1.6.4 might allow remote X servers to gain privileges via vectors involving image type and geometry, which triggers out-of-bounds read operations.
The URL percent-encoding decode function in libcurl before 7.51.0 is called `curl_easy_unescape`. Internally, even if this function would be made to allocate a unscape destination buffer larger than 2GB, it would return that new length in a signed 32 bit integer variable, thus the length would get either just truncated or both truncated and turned negative. That could then lead to libcurl writing outside of its heap based buffer.
The XListFonts function in X.org libX11 before 1.6.4 might allow remote X servers to gain privileges via vectors involving length fields, which trigger out-of-bounds write operations.
A stack-based buffer-overflow exists in Edimax IP-Camera IC-3116W (v3.06) and IC-3140W (v3.07), which allows an unauthenticated, unauthorized attacker to perform remote-code-execution due to a crafted GET-Request. The overflow occurs in binary ipcam_cgi due to a missing type check in function doGetSysteminfo(). This has been fixed in version: IC-3116W v3.08.
X.org libXrandr before 1.5.1 allows remote X servers to trigger out-of-bounds write operations by leveraging mishandling of reply data.
The telnet_input_char function in opt/src/accel-pppd/cli/telnet.c suffers from a memory corruption vulnerability, whereby user input cmdline_len is copied into a fixed buffer b->buf without any bound checks. If the server connects with a malicious client, crafted client requests can remotely trigger this vulnerability.