LibreOffice before 2017-03-17 has an out-of-bounds write caused by a heap-based buffer overflow related to the ReadJPEG function in vcl/source/filter/jpeg/jpegc.cxx.

In Tensorflow before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, the `data_splits` argument of `tf.raw_ops.StringNGrams` lacks validation. This allows a user to pass values that can cause heap overflow errors and even leak contents of memory In the linked code snippet, all the binary strings after `ee ff` are contents from the memory stack. Since these can contain return addresses, this data leak can be used to defeat ASLR. The issue is patched in commit 0462de5b544ed4731aa2fb23946ac22c01856b80, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

FreeType 2 before 2017-03-08 has an out-of-bounds write caused by a heap-based buffer overflow related to the TT_Get_MM_Var function in truetype/ttgxvar.c and the sfnt_init_face function in sfnt/sfobjs.c.

FFmpeg before 2017-02-07 has an out-of-bounds write caused by a heap-based buffer overflow related to the decode_frame function in libavcodec/pictordec.c.

LibreOffice before 2017-03-11 has an out-of-bounds write caused by a heap-based buffer overflow in the SVMConverter::ImplConvertFromSVM1 function in vcl/source/gdi/svmconverter.cxx.

Mozilla developers and community members reported memory safety bugs present in Firefox 81 and Firefox ESR 78.3. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox ESR < 78.4, Firefox < 82, and Thunderbird < 78.4.

A vulnerability was found in D-Link DIR-513 up to 1.10 and classified as critical. This issue affects the function formSetWanL2TPcallback of the file /goform/formSetWanL2TPtriggers of the component HTTP POST Request Handler. The manipulation leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered in the reorder crate through 2021-02-24 for Rust. swap_index can return uninitialized values if an iterator returns a len() that is too large.

A vulnerability has been found in Tenda M3 1.0.0.12. Affected by this vulnerability is the function formGetMasterPassengerAnalyseData of the file /goform/getMasterPassengerAnalyseData. The manipulation of the argument Time leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered in apply.cgi on D-Link DAP-1520 devices before 1.10b04Beta02. Whenever a user performs a login action from the web interface, the request values are being forwarded to the ssi binary. On the login page, the web interface restricts the password input field to a fixed length of 15 characters. The problem is that validation is being done on the client side, hence it can be bypassed. When an attacker manages to intercept the login request (POST based) and tampers with the vulnerable parameter (log_pass), to a larger length, the request will be forwarded to the webserver. This results in a stack-based buffer overflow. A few other POST variables, (transferred as part of the login request) are also vulnerable: html_response_page and log_user.

mruby through 2.1.2-rc has a heap-based buffer overflow in the mrb_yield_with_class function in vm.c because of incorrect VM stack handling. It can be triggered via the stack_copy function.

Vyper is a Pythonic Smart Contract Language for the Ethereum Virtual Machine. The `concat` built-in can write over the bounds of the memory buffer that was allocated for it and thus overwrite existing valid data. The root cause is that the `build_IR` for `concat` doesn't properly adhere to the API of copy functions (for `>=0.3.2` the `copy_bytes` function). A contract search was performed and no vulnerable contracts were found in production. The buffer overflow can result in the change of semantics of the contract. The overflow is length-dependent and thus it might go unnoticed during contract testing. However, certainly not all usages of concat will result in overwritten valid data as we require it to be in an internal function and close to the return statement where other memory allocations don't occur. This issue has been addressed in 0.4.0.

A vulnerability has been identified in SCALANCE X-200 switch family (incl. SIPLUS NET variants) (All versions < V5.2.5), SCALANCE X-200IRT switch family (incl. SIPLUS NET variants) (All versions < V5.5.0), SCALANCE X-300 switch family (incl. X408 and SIPLUS NET variants) (All versions < V4.1.0). The webserver of the affected devices contains a vulnerability that may lead to a heap overflow condition. An attacker could cause this condition on the webserver by sending specially crafted requests. This could stop the webserver temporarily.

In tensorflow-lite before versions 1.15.4, 2.0.3, 2.1.2, 2.2.1 and 2.3.1, when determining the common dimension size of two tensors, TFLite uses a `DCHECK` which is no-op outside of debug compilation modes. Since the function always returns the dimension of the first tensor, malicious attackers can craft cases where this is larger than that of the second tensor. In turn, this would result in reads/writes outside of bounds since the interpreter will wrongly assume that there is enough data in both tensors. The issue is patched in commit 8ee24e7949a203d234489f9da2c5bf45a7d5157d, and is released in TensorFlow versions 1.15.4, 2.0.3, 2.1.2, 2.2.1, or 2.3.1.

A heap overflow vulnerability in IPSec component of Ivanti Connect Secure (9.x, 22.x) and Ivanti Policy Secure allows an unauthenticated malicious user to send specially crafted requests in-order-to crash the service thereby causing a DoS attack. In certain conditions this may lead to execution of arbitrary code

Tenda AC18 router v15.03.05.19 and v15.03.05.05 was discovered to contain a stack overflow via the urls parameter at /goform/saveParentControlInfo.

H3C H200 H200V100R004 was discovered to contain a stack overflow via the function UpdateWanParams.

Tenda AC1206 V15.03.06.23 was discovered to contain a stack overflow via the speed_dir parameter in the function formSetSpeedWan.

Stack-based Buffer Overflow vulnerability in the ONVIF server component of Victure PC420 smart camera allows an attacker to execute remote code on the target device. This issue affects: Victure PC420 firmware version 1.2.2 and prior versions.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR R6400, R6700, R7000, R7850, R7900, R8000, RS400, and XR300 routers with firmware 1.0.4.84_10.0.58. Authentication is not required to exploit this vulnerability. The specific flaw exists within the check_ra service. A crafted raePolicyVersion in a RAE_Policy.json file can trigger an overflow of a fixed-length stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9852.

A memory corruption issue was found in Artifex Ghostscript 9.50 and 9.52. Use of a non-standard PostScript operator can allow overriding of file access controls. The 'rsearch' calculation for the 'post' size resulted in a size that was too large, and could underflow to max uint32_t. This was fixed in commit 5d499272b95a6b890a1397e11d20937de000d31b.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP agent. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. If the number of variables in the request exceeds the allocated buffer, a memory write out of the buffer boundaries occurs. This write operation provides a possibility to overwrite other variables allocated in the .bss section by the application. Because the sender of the frame is in control of the content that will be written beyond the buffer limits, and there is no strict process memory separation, this issue may allow overwriting of sensitive memory areas of an IoT device.

H3C H200 H200V100R004 was discovered to contain a stack overflow via the function EnableIpv6.

A flaw has been found in Tenda M3 1.0.0.12. Affected is the function formQuickIndex of the file /goform/QuickIndex. Executing manipulation of the argument PPPOEPassword can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been published and may be used.

Heap buffer overflow in the TFTP protocol handler in cURL 7.19.4 to 7.65.3.

thttpd 2007 has buffer underflow.

A vulnerability was detected in Tenda AC1206 15.03.06.23. Affected is the function GetParentControlInfo of the file /goform/GetParentControlInfo. The manipulation of the argument mac results in stack-based buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used.

A stack-based buffer overflow on DrayTek Vigor2960, Vigor3900, and Vigor300B devices before 1.5.1.1 allows remote attackers to execute arbitrary code via the formuserphonenumber parameter in an authusersms action to mainfunction.cgi.

Tenda AC1206 V15.03.06.23 was discovered to contain a stack overflow via the page parameter in the function fromAddressNat.

Tenda AC1206 V15.03.06.23 was discovered to contain a stack overflow via the function formSetClientState.

Tenda AC1206 V15.03.06.23 was discovered to contain a stack overflow via the list parameter at the function formSetVirtualSer.

Tenda AC18 router v15.03.05.19 and v15.03.05.05 was discovered to contain a stack overflow via the list parameter at /goform/SetVirtualServerCfg.

Mozilla Network Security Services (NSS) before 3.21.4, 3.22.x through 3.28.x before 3.28.4, 3.29.x before 3.29.5, and 3.30.x before 3.30.1 allows remote attackers to cause a denial of service (out-of-bounds write) or possibly have unspecified other impact by leveraging incorrect base64 operations.

Stack-based buffer overflow vulnerability in Vigor3900, Vigor2960, and Vigor300B with firmware before 1.5.1.1.

A stack-based buffer overflow in DMitry (Deepmagic Information Gathering Tool) 1.3a might allow remote WHOIS servers to execute arbitrary code via a long line in a response that is mishandled by nic_format_buff.

Netgear N300 wireless router wnr2000v4-V1.0.0.70 is vulnerable to Buffer Overflow via uhttpd. There is a stack overflow vulnerability caused by strcpy.

A vulnerability in the MIME message handling of the Domino server (versions 9 and 10) could potentially be exploited by an unauthenticated attacker resulting in a stack buffer overflow. This could allow a remote attacker to crash the server or inject code into the system which would execute with the privileges of the server.

A Stack Buffer Overflow issue was discovered in 3S-Smart Software Solutions GmbH CODESYS Web Server. The following versions of CODESYS Web Server, part of the CODESYS WebVisu web browser visualization software, are affected: CODESYS Web Server Versions 2.3 and prior. A malicious user could overflow the stack buffer by providing overly long strings to functions that handle the XML. Because the function does not verify string size before copying to memory, the attacker may then be able to crash the application or run arbitrary code.

Tenda AC18 router v15.03.05.19 and v15.03.05.05 was discovered to contain a stack overflow via the list parameter at /goform/SetIpMacBind.

In Xiaomi router R3600, ROM version<1.0.20, the connection service can be injected through the web interface, resulting in stack overflow or remote code execution.

H3C H200 H200V100R004 was discovered to contain a stack overflow via the function SetMobileAPInfoById.

H3C H200 H200V100R004 was discovered to contain a stack overflow via the function SetAPWifiorLedInfoById.

Buffer overflows were discovered in Contiki-NG 4.4 through 4.5, in the SNMP bulk get request response encoding function. The function parsing the received SNMP request does not verify the input message's requested variables against the capacity of the internal SNMP engine buffer. When a bulk get request response is assembled, a stack buffer dedicated for OIDs (with a limited capacity) is allocated in snmp_engine_get_bulk(). When snmp_engine_get_bulk() is populating the stack buffer, an overflow condition may occur due to lack of input length validation. This makes it possible to overwrite stack regions beyond the allocated buffer, including the return address from the function. As a result, the code execution path may be redirected to an address provided in the SNMP bulk get payload. If the target architecture uses common addressing space for program and data memory, it may also be possible to supply code in the SNMP request payload, and redirect the execution path to the remotely injected code, by modifying the function's return address.

Pre-auth memory corruption in HPE Serviceguard

H3C H200 H200V100R004 was discovered to contain a stack overflow via the function UpdateSnat.

Softing Industrial Automation all versions prior to the latest build of version 4.47.0, The affected product is vulnerable to a heap-based buffer overflow, which may allow an attacker to remotely execute arbitrary code.

H3C GR-1200W MiniGRW1A0V100R006 was discovered to contain a stack overflow via the function UpdateWanModeMulti.

An exploitable stack buffer overflow vulnerability exists in the MQTT packet parsing functionality of Cesanta Mongoose 6.8. A specially crafted MQTT SUBSCRIBE packet can cause a stack buffer overflow resulting in remote code execution. An attacker needs to send a specially crafted MQTT packet over the network to trigger this vulnerability.

Netgear Nighthawk AC1900 Smart WiFi Dual Band Gigabit Router R7000-V1.0.11.134_10.2.119 is vulnerable to Buffer Overflow via the wl binary in firmware. There is a stack overflow vulnerability caused by strncat