An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the key passwd in Routing RIP Settings.

An OS command injection vulnerability exists in the Web Manager Diagnostics: Ping functionality of Lantronix PremierWave 2050 8.9.0.0R4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Tenda PA6 Wi-Fi Powerline extender 1.0.1.21 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially crafted string, an attacker could modify the device name of an attached PLC adapter to inject and execute arbitrary commands on the system with root privileges.

A specially-crafted HTTP request can lead to arbitrary command execution in DSA keypasswd parameter. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An OS command injection vulnerability exists in the console infactory_wlan functionality of InHand Networks InRouter302 V3.5.37. A specially-crafted series of network requests can lead to remote code execution. An attacker can send a sequence of requests to trigger this vulnerability.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an authenticated, remote attacker to execute arbitrary commands with root privileges. The vulnerability is due to incorrect input validation of user-supplied data by the NX-API subsystem. An attacker could exploit this vulnerability by sending malicious HTTP or HTTPS packets to the management interface of an affected system that has the NX-API feature enabled. A successful exploit could allow the attacker to perform a command-injection attack and execute arbitrary commands with root privileges. Note: NX-API is disabled by default. MDS 9000 Series Multilayer Switches are affected running software versions prior to 8.1(1b) and 8.2(3). Nexus 3000 Series Switches are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 3500 Platform Switches are affected running software versions prior to 7.0(3)I7(4). Nexus 2000, 5500, 5600, and 6000 Series Switches are affected running software versions prior to 7.3(4)N1(1). Nexus 9000 Series Switches in Standalone NX-OS Mode are affected running software versions prior to 7.0(3)I4(9) and 7.0(3)I7(4). Nexus 7000 and 7700 Series Switches are affected running software versions prior to 7.3(3)D1(1) and 8.2(3).

A vulnerability in the update service of Cisco Webex Meetings Desktop App and Cisco Webex Productivity Tools for Windows could allow an authenticated, local attacker to execute arbitrary commands as a privileged user. The vulnerability is due to insufficient validation of user-supplied parameters. An attacker could exploit this vulnerability by invoking the update service command with a crafted argument. An exploit could allow the attacker to run arbitrary commands with SYSTEM user privileges. While the CVSS Attack Vector metric denotes the requirement for an attacker to have local access, administrators should be aware that in Active Directory deployments, the vulnerability could be exploited remotely by leveraging the operating system remote management tools. This vulnerability is fixed in Cisco Webex Meetings Desktop App Release 33.6.6 and 33.9.1 releases. This vulnerability is fixed in Cisco Webex Productivity Tools Release 33.0.7.

MyQ Server in MyQ X Smart before 8.2 allows remote code execution by unprivileged users because administrative session data can be read in the %PROGRAMFILES%\MyQ\PHP\Sessions directory. The "Select server file" feature is only intended for administrators but actually does not require authorization. An attacker can inject arbitrary OS commands (such as commands to create new .php files) via the Task Scheduler component.

app/call_centers/cmd.php in the Call Center Queue Module in FusionPBX up to 4.5.7 suffers from a command injection vulnerability due to a lack of input validation, which allows authenticated attackers (with at least the permission call_center_queue_add or call_center_queue_edit) to execute any commands on the host as www-data.

A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.

A vulnerability in the Intelligent Platform Management Interface (IPMI) of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges on the underlying operating system (OS). The vulnerability is due to insufficient input validation of user-supplied commands. An attacker who has administrator privileges and access to the network where the IPMI resides could exploit this vulnerability by submitting crafted input to the affected commands. A successful exploit could allow the attacker to gain root privileges on the affected device.

Command injection vulnerability in CWP v0.9.8.1126 that allows normal users to run commands as the root user.

FusionPBX 4.4.8 allows an attacker to execute arbitrary system commands by submitting a malicious command to the service_edit.php file (which will insert the malicious command into the database). To trigger the command, one needs to call the services.php file via a GET request with the service id followed by the parameter a=start to execute the stored command.

There is an OS Command Injection in Nexus Repository Manager <= 2.14.14 (bypass CVE-2019-5475) that could allow an attacker a Remote Code Execution (RCE). All instances using CommandLineExecutor.java with user-supplied data is vulnerable, such as the Yum Configuration Capability.

An OS command injection vulnerability in FortiExtender 4.1.0 to 4.1.1, 4.0.0 and below under CLI admin console may allow unauthorized administrators to run arbitrary system level commands via specially crafted "execute date" commands.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Interface field to SetStaticRouteSettings.

In Fibaro Home Center 2 and Lite devices with firmware version 4.540 and older an authenticated user can run commands as root user using a command injection vulnerability.

EyesOfNetwork 5.1 allows Remote Command Execution via shell metacharacters in the module/tool_all/ host field.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MaxIdTime field to SetWanSettings.

Vulnerability in rconfig “date” enables an attacker with user level access to the CLI to inject root level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the LoginPassword field to Login.

A flaw was found in the CloudForms management engine version 5.10 and CloudForms management version 5.11, which triggered remote code execution through NFS schedule backup. An attacker logged into the management console could use this flaw to execute arbitrary shell commands on the CloudForms server as root.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS command line interface (CLI) enables an authenticated administrator with access to the CLI to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.20-h1; PAN-OS 9.0 versions earlier than PAN-OS 9.0.14-h3; PAN-OS 9.1 versions earlier than PAN-OS 9.1.11-h2; PAN-OS 10.0 versions earlier than PAN-OS 10.0.8; PAN-OS 10.1 versions earlier than PAN-OS 10.1.3. Prisma Access customers that have Prisma Access 2.1 firewalls are impacted by this issue.

The traceroute function on the TP-Link TL-WR840N v4 router with firmware through 0.9.1 3.16 is vulnerable to remote code execution via a crafted payload in an IP address input field.

An issue was discovered in JetBrains TeamCity 2018.2.4. A TeamCity Project administrator could execute any command on the server machine. The issue was fixed in TeamCity 2018.2.5 and 2019.1.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Type field to SetWanSettings, a related issue to CVE-2019-13482.

A command injection vulnerability exists in the Zingbox Inspector versions 1.286 and earlier, that allows for an authenticated user to execute arbitrary system commands in the CLI.

Vulnerability in rconfig “cert_utils” enables an attacker with user level access to the CLI to inject root level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

An issue was discovered on D-Link DIR-823G devices with firmware V1.0.2B05. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the Username field to Login.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “check_vertica_upgrade” value for the “cpIp” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

An OS command injection vulnerability in the Palo Alto Networks PAN-OS web interface enables an authenticated administrator to execute arbitrary OS commands to escalate privileges. This issue impacts: PAN-OS 9.0 version 9.0.10 through PAN-OS 9.0.14; PAN-OS 9.1 version 9.1.4 through PAN-OS 9.1.10; PAN-OS 10.0 version 10.0.7 and earlier PAN-OS 10.0 versions; PAN-OS 10.1 version 10.1.0 through PAN-OS 10.1.1. Prisma Access firewalls and firewalls running PAN-OS 8.1 versions are not impacted by this issue.

A Remote Code Execution (RCE) issue in the addon CUx-Daemon 1.11a of the eQ-3 Homematic CCU-Firmware 2.35.16 until 2.45.6 allows remote authenticated attackers to execute system commands as root remotely via a simple HTTP request.

An OS command injection vulnerability exists in the Web Manager Wireless Network Scanner functionality of Lantronix PremierWave 2050 8.9.0.0R4. A specially-crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An OS command injection vulnerability exists in the Web Manager SslGenerateCertificate functionality of Lantronix PremierWave 2050 8.9.0.0R4 (in QEMU). A specially crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

A remote execution of arbitrary commands vulnerability was discovered in Aruba CX 6200F Switch Series, Aruba 6300 Switch Series, Aruba 6400 Switch Series, Aruba 8320 Switch Series, Aruba 8325 Switch Series, Aruba 8400 Switch Series, Aruba CX 8360 Switch Series version(s): Aruba AOS-CX firmware: 10.04.xxxx - versions prior to 10.04.3070, 10.05.xxxx - versions prior to 10.05.0070, 10.06.xxxx - versions prior to 10.06.0110, 10.07.xxxx - versions prior to 10.07.0001. Aruba has released upgrades for Aruba AOS-CX devices that address this security vulnerability.

VMware Carbon Black App Control (8.5.x prior to 8.5.14, 8.6.x prior to 8.6.6, 8.7.x prior to 8.7.4 and 8.8.x prior to 8.8.2) contains an OS command injection vulnerability. An authenticated, high privileged malicious actor with network access to the VMware App Control administration interface may be able to execute commands on the server due to improper input validation leading to remote code execution.

An OS command injection vulnerability exists in the Web Manager SslGenerateCSR functionality of Lantronix PremierWave 2050 8.9.0.0R4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

AdRem NetCrunch 10.6.0.4587 allows Remote Code Execution. In the NetCrunch web client, a read-only administrator can execute arbitrary code on the server running the NetCrunch server software.

Hongdian H8922 3.0.5 devices allow OS command injection via shell metacharacters into the ip-address (aka Destination) field to the tools.cgi ping command, which is accessible with the username guest and password guest.

A specially-crafted HTTP request can lead to arbitrary command execution in EC keypasswd parameter. An attacker can make an authenticated HTTP request to trigger this vulnerability.

An OS command injection vulnerability exists in the Web Manager FsUnmount functionality of Lantronix PremierWave 2050 8.9.0.0R4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Citrix SD-WAN 10.2.x before 10.2.3 and NetScaler SD-WAN 10.0.x before 10.0.8 have Improper Input Validation (issue 6 of 6).

An issue was discovered in TRENDnet TEW-827DRU firmware before 2.05B11. There is a command injection in apply.cgi (exploitable with authentication) via the Private Port in Add Virtual Server.

An issue was discovered on D-Link DIR-818LW devices with firmware 2.06betab01. There is a command injection in HNAP1 (exploitable with Authentication) via shell metacharacters in the MTU field to SetWanSettings.

A command execution vulnerability exists in the wifi_country_code_update functionality of the home_security binary of Anker Eufy Homebase 2 2.1.6.9h. A specially-crafted set of network packets can lead to arbitrary command execution.

A vulnerability in the WebUI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system.

Dynacolor FCM-MB40 v1.2.0.0 devices allow remote attackers to execute arbitrary commands via a crafted parameter to a CGI script, as demonstrated by sed injection in cgi-bin/camctrl_save_profile.cgi (save parameter) and cgi-bin/ddns.cgi.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to inject arbitrary commands that are executed with the privileges of the root user of the underlying operating system. The vulnerability is due to insufficient validation of user-supplied input to the web UI. An attacker could exploit this vulnerability by submitting crafted input in the web UI. A successful exploit could allow an attacker to execute arbitrary commands on the device with full root privileges.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.