Some Huawei products have an insufficient input verification vulnerability. Attackers can exploit this vulnerability in the LAN to cause service abnormal on affected devices.Affected product versions include:HiRouter-CD30-10 version 10.0.2.5;HiRouter-CT31-10 version 10.0.2.20;WS5200-12 version 10.0.1.9;WS5281-10 version 10.0.5.10;WS5800-10 version 10.0.3.25;WS7100-10 version 10.0.5.21;WS7200-10 version 10.0.5.21.

Array index error in the channelised_fill_sdh_g707_format function in epan/dissectors/packet-erf.c in the ERF dissector in Wireshark 1.8.x before 1.8.2 might allow remote attackers to cause a denial of service (application crash) via a crafted speed (aka rate) value.

The dissect_stun_message function in epan/dissectors/packet-stun.c in the STUN dissector in Wireshark 1.4.x before 1.4.15, 1.6.x before 1.6.10, and 1.8.x before 1.8.2 does not properly interact with key-destruction behavior in a certain tree library, which allows remote attackers to cause a denial of service (application crash) via a malformed packet.

IBM Security Identity Governance and Intelligence 5.2.6 could allow a user to cause a denial of service due to improperly validating a supplied URL, rendering the application unusuable. IBM X-Force ID: 189375.

In the Zephyr project Bluetooth subsystem, certain duplicate and back-to-back packets can cause incorrect behavior, resulting in a denial of service. This issue affects: zephyrproject-rtos zephyr version 2.2.0 and later versions, and version 1.14.0 and later versions.

In RegisterNotificationResponse::GetEvent of register_notification_packet.cc, there is a possible abort due to improper input validation. This could lead to remote denial of service of the Bluetooth service, over Bluetooth, with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-10Android ID: A-144066833

The Bluetooth Low Energy implementation on STMicroelectronics BLE Stack through 1.3.1 for STM32WB5x devices does not properly handle consecutive Attribute Protocol (ATT) requests on reception, allowing attackers in radio range to cause an event deadlock or crash via crafted packets.

A vulnerability in the Cluster Management Protocol (CMP) processing code in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation when processing CMP management packets. An attacker could exploit this vulnerability by sending malicious CMP management packets to an affected device. A successful exploit could cause the switch to crash, resulting in a DoS condition. The switch will reload automatically.

A vulnerability in the internal packet processing of Cisco Aironet Series Access Points (APs) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected AP if the switch interface where the AP is connected has port security configured. The vulnerability exists because the AP forwards some malformed wireless client packets outside of the Control and Provisioning of Wireless Access Points (CAPWAP) tunnel. An attacker could exploit this vulnerability by sending crafted wireless packets to an affected AP. A successful exploit could allow the attacker to trigger a security violation on the adjacent switch port, which could result in a DoS condition. Note: Though the Common Vulnerability Scoring System (CVSS) score corresponds to a High Security Impact Rating (SIR), this vulnerability is considered Medium because a workaround is available and exploitation requires a specific switch configuration. There are workarounds that address this vulnerability.

A vulnerability has been identified in SCALANCE W1788-1 M12 (All versions < V3.0.0), SCALANCE W1788-2 EEC M12 (All versions < V3.0.0), SCALANCE W1788-2 M12 (All versions < V3.0.0), SCALANCE W1788-2IA M12 (All versions < V3.0.0). Affected devices do not properly handle malformed TCP packets received over the RemoteCapture feature. This could allow an attacker to lead to a denial of service condition which only affects the port used by the RemoteCapture feature.

The client 802.11 mac implementation in Espressif ESP8266_NONOS_SDK 2.2.0 through 3.1.0 does not validate correctly the RSN AuthKey suite list count in beacon frames, probe responses, and association responses, which allows attackers in radio range to cause a denial of service (crash) via a crafted message.

A vulnerability in the Open Shortest Path First (OSPF) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software improperly parses certain options in OSPF link-state advertisement (LSA) type 11 packets. An attacker could exploit this vulnerability by sending a crafted LSA type 11 OSPF packet to an affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition for client traffic that is traversing the device.

Insufficient input validation vulnerability in subsystem for Intel(R) AMT before versions 11.8.65, 11.11.65, 11.22.65, 12.0.35 may allow an unauthenticated user to potentially enable denial of service via adjacent network access.

Certain NETGEAR devices are affected by denial of service. This affects GS110EMX before 1.0.0.9, GS810EMX before 1.0.0.5, XS512EM before 1.0.0.6, and XS724EM before 1.0.0.6.

Drager Infinity Delta, Infinity Delta, all versions, Delta XL, all versions, Kappa, all version, and Infinity Explorer C700, all versions. A malformed network packet may cause the monitor to reboot. By repeatedly sending the malformed network packet, an attacker may be able to disrupt patient monitoring by causing the monitor to repeatedly reboot until it falls back to default configuration and loses network connectivity.

A security flaw was found in the ip_frag_reasm() function in net/ipv4/ip_fragment.c in the Linux kernel from 4.19-rc1 to 4.19-rc3 inclusive, which can cause a later system crash in ip_do_fragment(). With certain non-default, but non-rare, configuration of a victim host, an attacker can trigger this crash remotely, thus leading to a remote denial-of-service.

A missing input sanitization flaw was found in the implementation of LDP database used for the LDAP server. An attacker could use this flaw to cause a denial of service against a samba server, used as a Active Directory Domain Controller. All versions of Samba from 4.8.0 onwards are vulnerable

In the Siemens 7KM PAC Switched Ethernet PROFINET expansion module (All versions < V2.1.3), a Denial-of-Service condition could be induced by a specially crafted PROFINET DCP packet sent as a local Ethernet (Layer 2) broadcast. The affected component requires a manual restart via the main device to recover.

A vulnerability in the VLAN Trunking Protocol (VTP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to corrupt the internal VTP database on an affected device and cause a denial of service (DoS) condition. The vulnerability is due to a logic error in how the affected software handles a subset of VTP packets. An attacker could exploit this vulnerability by sending VTP packets in a sequence that triggers a timeout in the VTP message processing code of the affected software. A successful exploit could allow the attacker to impact the ability to create, modify, or delete VLANs and cause a DoS condition. There are workarounds that address this vulnerability. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS Software or Cisco IOS XE Software, are operating in VTP client mode or VTP server mode, and do not have a VTP domain name configured. The default configuration for Cisco devices that are running Cisco IOS Software or Cisco IOS XE Software and support VTP is to operate in VTP server mode with no domain name configured.

A vulnerability when handling incoming 802.11 Association Requests for Cisco Aironet 1800 Series Access Point (APs) on Qualcomm Atheros (QCA) based hardware platforms could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected system. A successful exploit could prevent new clients from joining the AP. The vulnerability is due to incorrect handling of malformed or invalid 802.11 Association Requests. An attacker could exploit this vulnerability by sending a malformed stream of 802.11 Association Requests to the local interface of the targeted device. A successful exploit could allow the attacker to cause a DoS situation on an affected system, causing new client 802.11 Association Requests to fail. This vulnerability affects the following Cisco products: Aironet 1560 Series Access Points, Aironet 1810 Series OfficeExtend Access Points, Aironet 1810w Series Access Points, Aironet 1815 Series Access Points, Aironet 1830 Series Access Points, Aironet 1850 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Cisco Bug IDs: CSCvg02116.

In Open vSwitch (OvS) 2.7.0, while parsing an OpenFlow role status message, there is a call to the abort() function for undefined role status reasons in the function `ofp_print_role_status_message` in `lib/ofp-print.c` that may be leveraged toward a remote DoS attack by a malicious switch.

An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a UPnP functionality for devices to interface with the router and interact with the device. It seems that the "NewInMessage" SOAP parameter passed with a huge payload results in crashing the process. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "miniupnpd" is the one that has the vulnerable function that receives the values sent by the SOAP request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function WscDevPutMessage at address 0x0041DBB8 in IDA pro is identified to be receiving the values sent in the SOAP request. The SOAP parameter "NewInMesage" received at address 0x0041DC30 causes the miniupnpd process to finally crash when a second request is sent to the same process.

A vulnerability has been identified in Primary Setup Tool (PST) (All versions < V4.2 HF1), SIMATIC Automation Tool (All versions < V3.0), SIMATIC NET PC-Software (All versions < V14 SP1), SIMATIC PCS 7 V8.1 (All versions), SIMATIC PCS 7 V8.2 (All versions < V8.2 SP1), SIMATIC STEP 7 (TIA Portal) V13 (All versions < V13 SP2), SIMATIC STEP 7 (TIA Portal) V14 (All versions < V14 SP1), SIMATIC STEP 7 V5.X (All versions < V5.6), SIMATIC WinAC RTX 2010 SP2 (All versions), SIMATIC WinAC RTX F 2010 SP2 (All versions), SIMATIC WinCC (TIA Portal) V13 (All versions < V13 SP2), SIMATIC WinCC (TIA Portal) V14 (All versions < V14 SP1), SIMATIC WinCC V7.2 and prior (All versions), SIMATIC WinCC V7.3 (All versions < V7.3 Update 15), SIMATIC WinCC V7.4 (All versions < V7.4 SP1 Upd1), SIMATIC WinCC flexible 2008 (All versions < flexible 2008 SP5), SINAUT ST7CC (All versions installed in conjunction with SIMATIC WinCC < V7.3 Update 15), SINEMA Server (All versions < V14), SINUMERIK 808D Programming Tool (All versions < V4.7 SP4 HF2), SMART PC Access (All versions < V2.3), STEP 7 - Micro/WIN SMART (All versions < V2.3), Security Configuration Tool (SCT) (All versions < V5.0). Specially crafted PROFINET DCP broadcast packets sent to the affected products on a local Ethernet segment (Layer 2) could cause a Denial-of-Service condition of some services. The services require manual restart to recover.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0, 12.1.0 - 12.1.2 and 11.5.1 - 11.6.1, an undisclosed sequence of packets, sourced from an adjacent network may cause TMM to crash.

A denial of service vulnerability in rpd daemon of Juniper Networks Junos OS allows a malformed MPLS ping packet to crash the rpd daemon if MPLS OAM is configured. Repeated crashes of the rpd daemon can result in an extended denial of service condition for the device. The affected releases are Junos OS 12.3X48 prior to 12.3X48-D50, 12.3X48-D55; 13.3 prior to 13.3R10; 14.1 prior to 14.1R4-S13, 14.1R8-S3, 14.1R9; 14.1X53 prior to 14.1X53-D42, 14.1X53-D50; 14.2 prior to 14.2R4-S8, 14.2R7-S6, 14.2R8; 15.1 prior to 15.1F2-S14, 15.1F5-S7, 15.1F6-S4, 15.1F7, 15.1R4-S7, 15.1R5-S1, 15.1R6; 15.1X49 prior to 15.1X49-D100; 15.1X53 prior to 15.1X53-D105, 15.1X53-D47, 15.1X53-D62, 15.1X53-D70; 16.1 prior to 16.1R3-S3, 16.1R4. No other Juniper Networks products or platforms are affected by this issue.

Short Message Service (SMS) module of Mate 9 Pro Huawei smart phones with the versions before LON-AL00B 8.0.0.354(C00) has a Denial of Service (DoS) vulnerability. An unauthenticated attacker may set up a pseudo base station, and send special malware text message to the phone, causing the mobile phone to fail to make calls and send and receive text messages.

Huawei MBB (Mobile Broadband) products E5771h-937 with the versions before E5771h-937TCPU-V200R001B328D62SP00C1133 and the versions before E5771h-937TCPU-V200R001B329D05SP00C1308 have a Denial of Service (DoS) vulnerability. When an attacker accessing device sends special http request to device, the webserver process will try to apply too much memory which can cause the device to become unable to respond. An attacker can launch a DoS attack by exploiting this vulnerability.

Some Huawei smartphones with software of BGO-L03C158B003CUSTC158D001 and BGO-L03C331B009CUSTC331D001 have a DoS vulnerability due to insufficient input validation. An attacker could exploit this vulnerability by sending specially crafted NFC messages to the target device. Successful exploit could make a service crash.

Improper Use of Validation Framework in firmware for some Intel(R) PROSet/Wireless Wi-Fi in multiple operating systems and some Killer(TM) Wi-Fi in Windows 10 and 11 may allow a unauthenticated user to potentially enable denial of service via adjacent access.

Improper input validation in firmware for Intel(R) PROSet/Wireless Wi-Fi in multiple operating systems and Killer(TM) Wi-Fi in Windows 10 and 11 may allow an unauthenticated user to potentially enable denial of service via adjacent access.

Improper Validation of Specified Index, Position, or Offset in Input in software for some Intel(R) PROSet/Wireless Wi-Fi in multiple operating systems and some Killer(TM) Wi-Fi in Windows 10 and 11 may allow an unauthenticated user to potentially enable denial of service via adjacent access.

Improper input validation in software for Intel(R) PROSet/Wireless Wi-Fi and Killer(TM) Wi-Fi in Windows 10 and 11 may allow an unauthenticated user to potentially enable denial of service via adjacent access.

Improper input validation in firmware for some Intel(R) PROSet/Wireless Wi-Fi in multiple operating systems and some Killer(TM) Wi-Fi in Windows 10 and 11 may allow an unauthenticated user to potentially enable denial of service via adjacent access.

Improper Validation of Consistency within input in firmware for some Intel(R) PROSet/Wireless Wi-Fi in multiple operating systems and some Killer(TM) Wi-Fi in Windows 10 and 11 may allow a unauthenticated user to potentially enable denial of service via adjacent access.

A vulnerability in the handling of IEEE 802.11w Protected Management Frames (PMFs) of Cisco Catalyst 9800 Series Wireless Controllers that are running Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to terminate a valid user connection to an affected device. The vulnerability exists because the affected software does not properly validate 802.11w disassociation and deauthentication PMFs that it receives. An attacker could exploit this vulnerability by sending a spoofed 802.11w PMF from a valid, authenticated client on a network adjacent to an affected device. A successful exploit could allow the attacker to terminate a single valid user connection to the affected device.