A vulnerability in the internal packet processing of Cisco Aironet Series Access Points (APs) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected AP if the switch interface where the AP is connected has port security configured. The vulnerability exists because the AP forwards some malformed wireless client packets outside of the Control and Provisioning of Wireless Access Points (CAPWAP) tunnel. An attacker could exploit this vulnerability by sending crafted wireless packets to an affected AP. A successful exploit could allow the attacker to trigger a security violation on the adjacent switch port, which could result in a DoS condition. Note: Though the Common Vulnerability Scoring System (CVSS) score corresponds to a High Security Impact Rating (SIR), this vulnerability is considered Medium because a workaround is available and exploitation requires a specific switch configuration. There are workarounds that address this vulnerability.

A vulnerability in the Open Shortest Path First (OSPF) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software improperly parses certain options in OSPF link-state advertisement (LSA) type 11 packets. An attacker could exploit this vulnerability by sending a crafted LSA type 11 OSPF packet to an affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition for client traffic that is traversing the device.

A vulnerability in the VLAN Trunking Protocol (VTP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to corrupt the internal VTP database on an affected device and cause a denial of service (DoS) condition. The vulnerability is due to a logic error in how the affected software handles a subset of VTP packets. An attacker could exploit this vulnerability by sending VTP packets in a sequence that triggers a timeout in the VTP message processing code of the affected software. A successful exploit could allow the attacker to impact the ability to create, modify, or delete VLANs and cause a DoS condition. There are workarounds that address this vulnerability. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS Software or Cisco IOS XE Software, are operating in VTP client mode or VTP server mode, and do not have a VTP domain name configured. The default configuration for Cisco devices that are running Cisco IOS Software or Cisco IOS XE Software and support VTP is to operate in VTP server mode with no domain name configured.

A vulnerability when handling incoming 802.11 Association Requests for Cisco Aironet 1800 Series Access Point (APs) on Qualcomm Atheros (QCA) based hardware platforms could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected system. A successful exploit could prevent new clients from joining the AP. The vulnerability is due to incorrect handling of malformed or invalid 802.11 Association Requests. An attacker could exploit this vulnerability by sending a malformed stream of 802.11 Association Requests to the local interface of the targeted device. A successful exploit could allow the attacker to cause a DoS situation on an affected system, causing new client 802.11 Association Requests to fail. This vulnerability affects the following Cisco products: Aironet 1560 Series Access Points, Aironet 1810 Series OfficeExtend Access Points, Aironet 1810w Series Access Points, Aironet 1815 Series Access Points, Aironet 1830 Series Access Points, Aironet 1850 Series Access Points, Aironet 2800 Series Access Points, Aironet 3800 Series Access Points. Cisco Bug IDs: CSCvg02116.

A vulnerability in the Fibre Channel over Ethernet (FCoE) protocol implementation in Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition when an FCoE-related process unexpectedly reloads. This vulnerability affects Cisco NX-OS Software on the following Cisco devices when they are configured for FCoE: Multilayer Director Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches. More Information: CSCvc91729. Known Affected Releases: 8.3(0)CV(0.833). Known Fixed Releases: 8.3(0)ISH(0.62) 8.3(0)CV(0.944) 8.1(1) 8.1(0.8)S0 7.3(2)D1(0.47).

A vulnerability in the Cisco IOS Software forwarding queue of Cisco 2960X and 3750X switches could allow an unauthenticated, adjacent attacker to cause a memory leak in the software forwarding queue that would eventually lead to a partial denial of service (DoS) condition. More Information: CSCva72252. Known Affected Releases: 15.2(2)E3 15.2(4)E1. Known Fixed Releases: 15.2(2)E6 15.2(4)E3 15.2(5)E1 15.2(5.3.28i)E1 15.2(6.0.49i)E 3.9(1)E.

A vulnerability in IPv6 traffic processing of Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a Layer 2 (L2) loop in a configured VLAN, resulting in a denial of service (DoS) condition for that VLAN. The vulnerability is due to a logic error when processing specific link-local IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that would flow inbound through the wired interface of an affected device. A successful exploit could allow the attacker to cause traffic drops in the affected VLAN, thus triggering the DoS condition.

A vulnerability in the Virtual Private LAN Service (VPLS) code of Cisco IOS 15.0 through 15.4 for Cisco Catalyst 6800 Series Switches could allow an unauthenticated, adjacent attacker to cause a C6800-16P10G or C6800-16P10G-XL type line card to crash, resulting in a denial of service (DoS) condition. The vulnerability is due to a memory management issue in the affected software. An attacker could exploit this vulnerability by creating a large number of VPLS-generated MAC entries in the MAC address table of an affected device. A successful exploit could allow the attacker to cause a C6800-16P10G or C6800-16P10G-XL type line card to crash, resulting in a DoS condition. This vulnerability affects Cisco Catalyst 6800 Series Switches that are running a vulnerable release of Cisco IOS Software and have a Cisco C6800-16P10G or C6800-16P10G-XL line card in use with Supervisor Engine 6T. To be vulnerable, the device must also be configured with VPLS and the C6800-16P10G or C6800-16P10G-XL line card needs to be the core-facing MPLS interfaces. Cisco Bug IDs: CSCva61927.

A vulnerability in the handling of encrypted wireless frames of Cisco Aironet Access Point (AP) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to incomplete cleanup of resources when dropping certain malformed frames. An attacker could exploit this vulnerability by connecting as a wireless client to an affected AP and sending specific malformed frames over the wireless connection. A successful exploit could allow the attacker to cause degradation of service to other clients, which could potentially lead to a complete DoS condition.

Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Multiple vulnerabilities in the Server Message Block (SMB) Protocol preprocessor detection engine for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent or remote attacker to cause a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A Denial of Service Vulnerability in 802.11 ingress connection authentication handling for the Cisco Mobility Express 2800 and 3800 Access Points (APs) could allow an unauthenticated, adjacent attacker to cause authentication to fail. Affected Products: This vulnerability affects Cisco Mobility Express 2800 Series and 3800 Series Access Points when configured in local mode in 40 MHz. More Information: CSCvb33575. Known Affected Releases: 8.2(121.12) 8.4(1.82). Known Fixed Releases: 8.2(131.2) 8.2(131.3) 8.2(131.4) 8.2(141.0) 8.3(104.53) 8.3(104.54) 8.4(1.80) 8.4(1.85).

A Denial of Service Vulnerability in 802.11 ingress packet processing of the Cisco Mobility Express 2800 and 3800 Access Points (APs) could allow an unauthenticated, adjacent attacker to cause the connection table to be full of invalid connections and be unable to process new incoming requests. More Information: CSCvb66659. Known Affected Releases: 8.2(130.0). Known Fixed Releases: 8.2(131.10) 8.2(131.6) 8.2(141.0) 8.3(104.56) 8.4(1.88) 8.4(1.91).

A vulnerability in the DHCP service of Cisco Industrial Network Director could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper handling of DHCP lease requests. An attacker could exploit this vulnerability by sending malicious DHCP lease requests to an affected application. A successful exploit could allow the attacker to cause the DHCP service to terminate, resulting in a DoS condition.

A vulnerability in Cisco Aironet Series Access Points Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the improper processing of client packets that are sent to an affected access point (AP). An attacker could exploit this vulnerability by sending a large number of sustained client packets to the affected AP. A successful exploit could allow the attacker to cause the affected AP to crash, resulting in a DoS condition.

Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the Layer 2 punt code of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a queue wedge on an interface that receives specific Layer 2 frames, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of certain Layer 2 frames. An attacker could exploit this vulnerability by sending specific Layer 2 frames on the segment the router is connected to. A successful exploit could allow the attacker to cause a queue wedge on the interface, resulting in a DoS condition.

A vulnerability in Cisco IOS XE Software running on Cisco cBR Series Converged Broadband Routers could allow an unauthenticated, adjacent attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the incorrect handling of certain DHCP packets. An attacker could exploit this vulnerability by sending certain DHCP packets to a specific segment of an affected device. A successful exploit could allow the attacker to increase CPU usage on the affected device and cause a DoS condition. Cisco Bug IDs: CSCvg73687.

A vulnerability in the packet processing functionality of Cisco access point (AP) software could allow an unauthenticated, adjacent attacker to exhaust resources on an affected device.  This vulnerability is due to insufficient management of resources when handling certain types of traffic. An attacker could exploit this vulnerability by sending a series of specific wireless packets to an affected device. A successful exploit could allow the attacker to consume resources on an affected device. A sustained attack could lead to the disruption of the Control and Provisioning of Wireless Access Points (CAPWAP) tunnel and intermittent loss of wireless client traffic.

A vulnerability in the IPv6 protocol handling of the management interfaces of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause an IPv6 flood on the management interface network of an affected device. The vulnerability exists because the software incorrectly forwards IPv6 packets that have an IPv6 node-local multicast group address destination and are received on the management interfaces. An attacker could exploit this vulnerability by connecting to the same network as the management interfaces and injecting IPv6 packets that have an IPv6 node-local multicast group address destination. A successful exploit could allow the attacker to cause an IPv6 flood on the corresponding network. Depending on the number of Cisco IOS XR Software nodes on that network segment, exploitation could cause excessive network traffic, resulting in network degradation or a denial of service (DoS) condition.

Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Multiple vulnerabilities in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause an affected IP camera to reload. The vulnerability is due to missing checks when Cisco Discovery Protocol messages are processed. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected IP camera. A successful exploit could allow the attacker to cause the affected IP camera to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the Link Layer Discovery Protocol (LLDP) for Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, adjacent attacker to disable switching on a small form-factor pluggable (SFP) interface. This vulnerability is due to incomplete validation of the source of a received LLDP packet. An attacker could exploit this vulnerability by sending a crafted LLDP packet on an SFP interface to an affected device. A successful exploit could allow the attacker to disable switching on the SFP interface, which could disrupt network traffic.

A vulnerability in the multicast DNS (mDNS) gateway feature of Cisco Aironet Series Access Points Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of incoming mDNS traffic. An attacker could exploit this vulnerability by sending a crafted mDNS packet to an affected device through a wireless network that is configured in FlexConnect local switching mode or through a wired network on a configured mDNS VLAN. A successful exploit could allow the attacker to cause the access point (AP) to reboot, resulting in a DoS condition.

The OSPF functionality in Cisco IOS and IOS XE allows remote attackers to cause a denial of service (device reload) via crafted options in an LSA type 11 packet, aka Bug ID CSCui21030.

The NTP implementation in Cisco IOS 12.0 through 12.4 and 15.0 through 15.1, and IOS XE 2.1 through 3.3, does not properly handle encapsulation of multicast NTP packets within MSDP SA messages, which allows remote attackers to cause a denial of service (device reload) by leveraging an MSDP peer relationship, aka Bug ID CSCuc81226.

The PPTP-ALG component in CRS Carrier Grade Services Engine (CGSE) and ASR 9000 Integrated Service Module (ISM) in Cisco IOS XR allows remote attackers to cause a denial of service (module reset) via crafted packet streams, aka Bug ID CSCue91963.

Cisco IOS XE 3.4 before 3.4.2S and 3.5 before 3.5.1S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) via malformed ICMP error packets associated with a (1) TCP or (2) UDP session that is under inspection by the Zone-Based Firewall (ZBFW) component, aka Bug ID CSCtt26470.

The T1/E1 driver-queue functionality in Cisco IOS 12.2 and 15.0 through 15.3, when an HDLC32 driver is used, allows remote attackers to cause a denial of service (interface queue wedge) via bursty network traffic, aka Bug ID CSCub67465.

The DNS-over-TCP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 DNS TCP stream, aka Bug ID CSCuf28733.

The PPTP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via crafted TCP port-1723 packets, aka Bug ID CSCtq14817.

Buffer overflow in the web-application interface on Cisco 9900 IP phones allows remote attackers to cause a denial of service (webapp interface outage) via long values in unspecified fields, aka Bug ID CSCuh10343.

Open Network Environment Platform (ONEP) in Cisco NX-OS allows remote authenticated users to cause a denial of service (network-element reload) via a crafted packet, aka Bug ID CSCui51551.

Apache Log4j2 versions 2.0-beta7 through 2.17.0 (excluding security fix releases 2.3.2 and 2.12.4) are vulnerable to a remote code execution (RCE) attack when a configuration uses a JDBC Appender with a JNDI LDAP data source URI when an attacker has control of the target LDAP server. This issue is fixed by limiting JNDI data source names to the java protocol in Log4j2 versions 2.17.1, 2.12.4, and 2.3.2.

A vulnerability in the batch provisioning feature in Cisco Prime Collaboration Provisioning Tool could allow an authenticated, remote attacker to overwrite system files as root. The vulnerability is due to lack of input validation of the parameters in BatchFileName and Directory. An attacker could exploit this vulnerability by manipulating the parameters of the batch action file function. Cisco Bug IDs: CSCvd61766.

A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

A vulnerability in the Telnet CLI command of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into the Telnet CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86771.

A vulnerability in the UpgradeManager of the Cisco Prime Collaboration Provisioning Tool 12.1 could allow an authenticated, remote attacker to write arbitrary files as root on the system. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by triggering the upgrade package installation functionality. Cisco Bug IDs: CSCvc90304.

A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.

A vulnerability in the web proxy functionality of the Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to forward traffic from the web proxy interface of an affected device to the administrative management interface of an affected device, aka an Access Control Bypass Vulnerability. Affected Products: virtual and hardware versions of Cisco Web Security Appliance (WSA). More Information: CSCvd88863. Known Affected Releases: 10.1.0-204 9.0.0-485.

The image-upgrade functionality on Cisco 9900 Unified IP phones allows local users to gain privileges by placing shell commands in an unspecified parameter, aka Bug ID CSCuh10334.

A vulnerability in the file check operation of Cisco ASR 5000 Series Aggregated Services Routers running the Cisco StarOS operating system could allow an authenticated, remote attacker to overwrite or modify arbitrary files on an affected system. More Information: CSCvd73726. Known Affected Releases: 21.0.v0.65839 21.3.M0.67005. Known Fixed Releases: 21.4.A0.67087 21.4.A0.67079 21.4.A0.67013 21.3.M0.67084 21.3.M0.67077 21.3.M0.66994 21.3.J0.66993 21.1.v0.67082 21.1.V0.67083.

A vulnerability in the implementation of the H.264 protocol in Cisco Meeting Server (CMS) 2.1.4 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected application does not properly validate Fragmentation Unit (FU-A) protocol packets. An attacker could exploit this vulnerability by sending a crafted H.264 FU-A packet through the affected application. A successful exploit could allow the attacker to cause a DoS condition on the affected system due to an unexpected restart of the CMS media process on the system. Although the CMS platform continues to operate and only the single, affected CMS media process is restarted, a brief interruption of media traffic for certain users could occur. Cisco Bug IDs: CSCve10131.

A vulnerability in configuration modification permissions validation for Cisco Unified Communications Manager could allow an authenticated, remote attacker to perform a horizontal privilege escalation where one user can modify another user's configuration. The vulnerability is due to lack of proper Role Based Access Control (RBAC) when certain user configuration changes are requested. An attacker could exploit this vulnerability by sending an authenticated, crafted HTTP request to the targeted application. An exploit could allow the attacker to impact the integrity of the application where one user can modify the configuration of another user's information. Cisco Bug IDs: CSCve27331. Known Affected Releases: 10.5(2.10000.5), 11.0(1.10000.10), 11.5(1.10000.6).

A vulnerability in the email message scanning of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass configured filters on the device, as demonstrated by the Attachment Filter. More Information: CSCvd34632. Known Affected Releases: 10.0.1-087 9.7.1-066. Known Fixed Releases: 10.0.2-020 9.8.1-015.

A vulnerability in the CLI of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into a vulnerable CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86787, CSCve60516, CSCve60555.

A vulnerability in the ingress processing of fragmented TCP packets by Cisco Wide Area Application Services (WAAS) could allow an unauthenticated, remote attacker to cause the WAASNET process to restart unexpectedly, causing a denial of service (DoS) condition. More Information: CSCvc57428. Known Affected Releases: 6.3(1). Known Fixed Releases: 6.3(0.143) 6.2(3c)6 6.2(3.22).

A vulnerability in the Server Message Block (SMB) protocol of Cisco Wide Area Application Services (WAAS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device due to a process restarting unexpectedly and creating Core Dump files. More Information: CSCvc63035. Known Affected Releases: 6.2(3a). Known Fixed Releases: 6.3(0.167) 6.2(3c)5 6.2(3.22).