An issue was discovered in GitLab Community and Enterprise Edition 11.3 to 12.3 in the protected environments feature. It has Insecure Permissions (issue 3 of 4).

Limesurvey before 3.17.14 uses an anti-CSRF cookie without the HttpOnly flag, which allows attackers to access a cookie value via a client-side script.

Compaq/Microcom 6000 Access Integrator does not disconnect a client after a certain number of failed login attempts, which allows remote attackers to guess usernames or passwords via a brute force attack.

The Telenav Scout GPS Link app 1.x for iOS, as used with Toyota and Lexus vehicles, has an incorrect protection mechanism against brute-force attacks on the authentication process, which makes it easier for attackers to obtain multimedia-screen access via port 7050 on the cellular network, as demonstrated by a DrivingRestriction method call to uma/jsonrpc/mobile.

IBM Security Directory Server 6.4.0 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 165178.

Ricoh SP C250DN 1.05 devices have an Authentication Method Vulnerable to Brute Force Attacks. Some Ricoh printers did not implement account lockout. Therefore, it was possible to obtain the local account credentials by brute force.

Some Xerox printers (such as the Phaser 3320 V53.006.16.000) did not implement account lockout. Local account credentials may be extracted from the device via brute force guessing attacks.

VMware Workspace ONE Access and Identity Manager, unintentionally provide a login interface on port 7443. A malicious actor with network access to port 7443 may attempt user enumeration or brute force the login endpoint, which may or may not be practical based on lockout policy configuration and password complexity for the target account.

An issue was discovered in Fimer Aurora Vision before 2.97.10. The response to a failed login attempt discloses whether the username or password is wrong, helping an attacker to enumerate usernames. This can make a brute-force attack easier.

It was found that all versions of 3Scale developer portal lacked brute force protections. An attacker could use this gap to bypass login controls, and access privileged information, or possibly conduct further attacks.

SilverStripe through 4.3.3 has incorrect access control for protected files uploaded via Upload::loadIntoFile(). An attacker may be able to guess a filename in silverstripe/assets via the AssetControlExtension.

Nextcloud server before 19.0.11, 20.0.10, 21.0.2 is vulnerable to brute force attacks due to lack of inclusion of IPv6 subnets in rate-limiting considerations. This could potentially result in an attacker bypassing rate-limit controls such as the Nextcloud brute-force protection.

Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.13, 20.011, and 21.0.3, there was a lack of ratelimiting on the public DAV endpoint. This may have allowed an attacker to enumerate potentially valid share tokens or credentials. The issue was fixed in versions 19.0.13, 20.0.11, and 21.0.3. There are no known workarounds.

Shopware is an open source eCommerce platform. In versions prior to 6.4.1.1 private files publicly accessible with Cloud Storage providers when the hashed URL is known. Users are recommend to first change their configuration to set the correct visibility according to the documentation. The visibility must be at the same level as `type`. When the Storage is saved on Amazon AWS we recommending disabling public access to the bucket containing the private files: https://docs.aws.amazon.com/AmazonS3/latest/userguide/access-control-block-public-access.html. Otherwise, update to Shopware 6.4.1.1 or install or update the Security plugin (https://store.shopware.com/en/detail/index/sArticle/518463/number/Swag136939272659) and run the command `./bin/console s3:set-visibility` to correct your cloud file visibilities.

A flaw was found in tripleo-ansible version as shipped in Red Hat Openstack 16.1. The Ansible log file is readable to all users during stack update and creation. The highest threat from this vulnerability is to data confidentiality.

An issue was discovered in Stormshield SNS through 4.2.1. A brute-force attack can occur.

IBM WebSphere Application Server 7.0, 8.0, 8.5, 9.0 and Liberty 17.0.0.3 through 21.0.0.9 could allow a remote user to enumerate usernames due to a difference of responses from valid and invalid login attempts. IBM X-Force ID: 205202.

A vulnerability in the Guest Portal login page of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to perform multiple login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Guest Portal login page. An exploit could allow the attacker to perform brute-force password attacks on the ISE Guest Portal. Cisco Bug IDs: CSCve98518.

BTCPay Server through 1.0.7.0 could allow a remote attacker to obtain sensitive information, caused by failure to set the HTTPOnly flag for a cookie.

IBM Tivoli Endpoint Manager (IBM BigFix 9.2 and 9.5) does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 123861.

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow unauthenticated attackers to access uncontrolled the login service at /webif/SecurityModule in a brute force attack. The password could be weak and default username is known as 'admin'. This is usable and part of an attack chain to gain SSH root access.

The Debian courier-authlib package before 0.71.1-2 for Courier Authentication Library creates a /run/courier/authdaemon directory with weak permissions, allowing an attacker to read user information. This may include a cleartext password in some configurations. In general, it includes the user's existence, uid and gids, home and/or Maildir directory, quota, and some type of password information (such as a hash).

CA eHealth Performance Manager through 6.3.2.12 is affected by Improper Restriction of Excessive Authentication Attempts. An attacker is able to perform an arbitrary number of /web/frames/ authentication attempts using different passwords, and eventually gain access to a targeted account, NOTE: This vulnerability only affects products that are no longer supported by the maintainer

HCL AppScan Standard is vulnerable to excessive authorization attempts

Pimcore before 6.2.2 lacks brute force protection for the 2FA token.

Philips e-Alert Unit (non-medical device), Version R2.1 and prior. The software, upon installation, sets incorrect permissions for an object that exposes it to an unintended actor.

A JSON Injection vulnerability exists in the `mintplex-labs/anything-llm` application, specifically within the username parameter during the login process at the `/api/request-token` endpoint. The vulnerability arises from improper handling of values, allowing attackers to perform brute force attacks without prior knowledge of the username. Once the password is known, attackers can conduct blind attacks to ascertain the full username, significantly compromising system security.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

Nextcloud Server is a Nextcloud package that handles data storage. In versions prior to 19.0.13, 20.011, and 21.0.3, there was a lack of ratelimiting on the shareinfo endpoint. This may have allowed an attacker to enumerate potentially valid share tokens. The issue was fixed in versions 19.0.13, 20.0.11, and 21.0.3. There are no known workarounds.

Improper restriction of excessive authentication attempts vulnerability in QSAN Storage Manager, XEVO, SANOS allows remote attackers to discover users’ credentials and obtain access via a brute force attack. Suggest contacting with QSAN and refer to recommendations in QSAN Document.

A weak password requirement vulnerability exists in the Create New User function of MintHCM RELEASE 3.0.8, which could lead an attacker to easier password brute-forcing.

IBM Guardium Data Encryption (GDE) 4.0.0.4 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 196217.

IBM Cognos Analytics 11.1.7 and 11.2.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 196339.

IBM Guardium Data Encryption (GDE) 3.0.0.3 and 4.0.0.4 could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. IBM X-Force ID: 196218.

IBM Planning Analytics 2.0 could allow a remote attacker to obtain sensitive information, caused by the failure to set the HTTPOnly flag. A remote attacker could exploit this vulnerability to obtain sensitive information from the cookie. IBM X-Force ID: 198755.

Revive Adserver before 3.2.3 suffers from Improper Restriction of Excessive Authentication Attempts. The login page of Revive Adserver is vulnerable to password-guessing attacks. An account lockdown feature was considered, but rejected to avoid introducing service disruptions to regular users during such attacks. A random delay has instead been introduced as a countermeasure in case of password failures, along with a system to discourage parallel brute forcing. These systems will effectively allow the valid users to log in to the adserver, even while an attack is in progress.

IBM Security Guardium 11.1 uses an inadequate account lockout setting that could allow a remote attacker to brute force account credentials. IBM X-Force ID: 174857.

In Solstice Pod before 3.3.0 (or Open4.3), the screen key can be enumerated using brute-force attacks via the /lookin/info Solstice Open Control API because there are only 1.7 million possibilities.