A vulnerability has been found in D-Link R15 (AX1500) 1.20.01 and below. By manipulating the model name parameter during a password change request in the web administrator page, it is possible to trigger a command injection in httpd.

In D-Link DIR-860L v2.03, there is a buffer overflow vulnerability due to the lack of length verification for the SID field in gena.cgi. Attackers who successfully exploit this vulnerability can cause the remote target device to crash or execute arbitrary commands.

SQL injection vulnerability in D-Link Online behavior audit gateway DAR-7000 V31R02B1413C allows a remote attacker to obtain sensitive information and execute arbitrary code via the editrole.php component.

A vulnerability, which was classified as critical, has been found in D-Link DIR-632 FW103B08. Affected by this issue is the function get_pure_content of the component HTTP POST Request Handler. The manipulation of the argument Content-Length leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-880 A1_FW107WWb08 was discovered to contain a buffer overflow via the function FUN_0001be68.

D-Link DIR-868L fw_revA_1-12_eu_multi_20170316 was discovered to contain a buffer overflow via the param_2 parameter in the inet_ntoa() function.

D-Link DIR-868L fw_revA_1-12_eu_multi_20170316 was discovered to contain a buffer overflow via the param_2 parameter in the FUN_0000acb4 function.

D-Link DIR-842 fw_revA_1-02_eu_multi_20151008 was discovered to contain multiple buffer overflows in the fgets function via the acStack_120 and acStack_220 parameters.

D-Link DIR-868L fw_revA_1-12_eu_multi_20170316 was discovered to contain a buffer overflow via the acStack_50 parameter.

D-Link DAP-2660 v1.13 was discovered to contain a buffer overflow via the f_ipv6_enable parameter at /bsc_ipv6. This vulnerability is exploited via a crafted POST request.

A vulnerability was found in D-Link DIR-823G 1.0.2B05_20181207. It has been rated as critical. This issue affects the function SetAutoRebootSettings/SetClientInfo/SetDMZSettings/SetFirewallSettings/SetParentsControlInfo/SetQoSSettings/SetVirtualServerSettings of the file /HNAP1/ of the component Web Management Interface. The manipulation leads to improper access controls. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device.

An issue was discovered on D-Link DCS-1130 devices. The device provides a user with the capability of setting a SMB folder for the video clippings recorded by the device. It seems that the POST parameters passed in this request (to test if email credentials and hostname sent to the device work properly) result in being passed as commands to a "system" API in the function and thus result in command injection on the device. If the firmware version is dissected using binwalk tool, we obtain a cramfs-root archive which contains the filesystem set up on the device that contains all the binaries. The library "libmailutils.so" is the one that has the vulnerable function "sub_1FC4" that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows an ARM little endian format. The function sub_1FC4 in IDA pro is identified to be receiving the values sent in the POST request and the value set in POST parameter "receiver1" is extracted in function "sub_15AC" which is then passed to the vulnerable system API call. The vulnerable library function is accessed in "cgibox" binary at address 0x0008F598 which calls the "mailLoginTest" function in "libmailutils.so" binary as shown below which results in the vulnerable POST parameter being passed to the library which results in the command injection issue.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom telnet daemon as a part of the busybox and retrieves the password from the shadow file using the function getspnam at address 0x00053894. Then performs a crypt operation on the password retrieved from the user at address 0x000538E0 and performs a strcmp at address 0x00053908 to check if the password is correct or incorrect. However, the /etc/shadow file is a part of CRAM-FS filesystem which means that the user cannot change the password and hence a hardcoded hash in /etc/shadow is used to match the credentials provided by the user. This is a salted hash of the string "admin" and hence it acts as a password to the device which cannot be changed as the whole filesystem is read only.

The D-Link DSL6740C modem has an Incorrect Use of Privileged APIs vulnerability, allowing unauthenticated remote attackers to modify any user’s password by leveraging the API, thereby granting access to Web, SSH, and Telnet services using that user’s account.

D-Link - CWE-294: Authentication Bypass by Capture-replay

On the D-Link DIR-615 before v20.12PTb04, once authenticated, this device identifies the user based on the IP address of his machine. By spoofing the IP address belonging to the victim's host, an attacker might be able to take over the administrative session without being prompted for authentication credentials. An attacker can get the victim's and router's IP addresses by simply sniffing the network traffic. Moreover, if the victim has web access enabled on his router and is accessing the web interface from a different network that is behind the NAT/Proxy, an attacker can sniff the network traffic to know the public IP address of the victim's router and take over his session as he won't be prompted for credentials.

D-Link DIR-846 devices with firmware 100A35 allow remote attackers to execute arbitrary code as root via HNAP1/control/SetGuestWLanSettings.php.

A security issue exists in D-Link D-View 8 v2.0.2.89 and prior that could allow an attacker to manipulate the probe inventory of the D-View service. This could result in the disclosure of information from other probes, denial of service conditions due to the probe inventory becoming full, or the execution of tasks on other probes.

A vulnerability has been found in D-Link DAR-7000 up to 20231126 and classified as critical. This vulnerability affects unknown code of the file /user/inc/workidajax.php. The manipulation of the argument id leads to sql injection. The exploit has been disclosed to the public and may be used. VDB-247162 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as critical was found in D-Link DIR-619L 2.04B04. This vulnerability affects the function formEasySetupWizard. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. The vendor was contacted early about this disclosure. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-822+ V1.0.2 contains a login bypass in the HNAP1 interface, which allows attackers to log in to administrator accounts with empty passwords.

D-Link DIR-619L v2.04(TW) was discovered to contain a stack overflow via the curTime parameter at /goform/formLogin.

Authentication Bypass vulnerability in D-Link DIR-885L FW102b01 allows remote attackers to gain escalated privileges via phpcgi. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Certain D-Link products are affected by: Buffer Overflow. This affects DIR-880L 1.08B04 and DIR-895 L/R 1.13b03. The impact is: execute arbitrary code (remote). The component is: htdocs/fileaccess.cgi. The attack vector is: A crafted HTTP request handled by fileacces.cgi could allow an attacker to mount a ROP attack: if the HTTP header field CONTENT_TYPE starts with ''boundary=' followed by more than 256 characters, a buffer overflow would be triggered, potentially causing code execution.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formWlanSetup function via the parameter f_wds_wepKey.

D-Link DIR-846 v1.00A52 was discovered to contain a remote command execution (RCE) vulnerability via the tomography_ping_address parameter in the /HNAP1 interface.

A vulnerability has been found in D-Link DIR-816 1.10CNB05 and classified as critical. This vulnerability affects unknown code of the file /goform/form2lansetup.cgi. The manipulation of the argument ip leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function httpd_debug.asp. This vulnerability allows attackers to execute arbitrary commands via the time parameter.

D-Link DSL-G256DG version vBZ_1.00.27 web management interface allows authentication bypass via an unspecified method.

D-Link DSL-224 firmware version 3.0.10 CWE-307: Improper Restriction of Excessive Authentication Attempts

D-Link DIR-300 firmware <=REVA1.06 and <=REVB2.06 is vulnerable to File inclusion via /model/__lang_msg.php.

A vulnerability was found in D-Link DIR-816 1.10CNB05. It has been declared as critical. This vulnerability affects the function QoSPortSetup of the file /goform/QoSPortSetup. The manipulation of the argument port0_group/port0_remarker/ssid0_group/ssid0_remarker leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-605L firmware version 1.17B01 BETA is vulnerable to stack overflow via /goform/formTcpipSetup,

D-Link device DI-7200GV2.E1 v21.04.09E1 was discovered to contain a command injection vulnerability in the function upgrade_filter. This vulnerability allows attackers to execute arbitrary commands via the path and time parameters.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formSysCmd function via the submit-url parameter.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formLanguageChange function via the nextPage parameter.

D-Link DIR823G_V1.0.2B05 was discovered to contain a stack overflow via the NewPassword parameters in SetPasswdSettings.

The DI-7400G+ router has a command injection vulnerability, which allows attackers to execute arbitrary commands on the device. The sub_478D28 function in in mng_platform.asp, and sub_4A12DC function in wayos_ac_server.asp of the jhttpd program, with the parameter ac_mng_srv_host.

A vulnerability was found in D-Link DIR-816 1.10CNB05. It has been classified as critical. This affects the function qosClassifier of the file /goform/qosClassifier. The manipulation of the argument dip_address/sip_address leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in D-Link DIR-816 1.10CNB05 and classified as critical. Affected by this issue is the function wirelessApcli_5g of the file /goform/wirelessApcli_5g. The manipulation of the argument apcli_mode_5g/apcli_enc_5g/apcli_default_key_5g leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

D-Link DIR-868L Hardware version A1, firmware version 1.12 is vulnerable to Buffer Overflow. The vulnerability is in scandir.sgi binary.

register_send.php on D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices does not require authentication, which can result in unintended enrollment in mydlink Cloud Services.

D-Link DIR-850L REV. B (with firmware through FW208WWb02) devices have a hardcoded password of wrgac25_dlink.2013gui_dir850l for the Alphanetworks account upon device reset, which allows remote attackers to obtain root access via a TELNET session.

D-Link DIR878 1.30B08 was discovered to contain a stack overflow in the sub_48d630 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

D-Link DIR878 1.30B08 was discovered to contain a stack overflow in the sub_498308 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

D-Link DIR878 1.30B08 was discovered to contain a stack overflow in the sub_478360 function. This vulnerability allows attackers to cause a Denial of Service (DoS) or execute arbitrary code via a crafted payload.

D-Link DIR-823G firmware version 1.02B05 has a buffer overflow vulnerability, which originates from the URL field in SetParentsControlInfo.

D-Link Go-RT-AC750 revA_v101b03 was discovered to contain a command injection vulnerability via the service parameter at soapcgi.main.

D-Link DIR-823G firmware version 1.02B05 has a buffer overflow vulnerability, which originates from the HostName field in SetParentsControlInfo.