An Improper Authentication issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3.1 build 150410 to V5.4.4 Build 161125, DS-2CD4x2xFWD Series V5.2.0 build 140721 to V5.4.0 Build 160414, DS-2CD4xx5 Series V5.2.0 build 140721 to V5.4.0 Build 160421, DS-2DFx Series V5.2.0 build 140805 to V5.4.5 Build 160928, and DS-2CD63xx Series V5.0.9 build 140305 to V5.3.5 Build 160106 devices. The improper authentication vulnerability occurs when an application does not adequately or correctly authenticate users. This may allow a malicious user to escalate his or her privileges on the system and gain access to sensitive information.

On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.

Hanwha Techwin SRN-4000, SRN-4000 firmware versions prior to SRN4000_v2.16_170401, A specially crafted http request and response could allow an attacker to gain access to the device management page with admin privileges without proper authentication.

AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.

An Improper Authentication issue was discovered in Newport XPS-Cx and XPS-Qx. An attacker may bypass authentication by accessing a specific uniform resource locator (URL).

The network enabled distribution of Kura before 2.1.0 takes control over the device's firewall setup but does not allow IPv6 firewall rules to be configured. Still the Equinox console port 5002 is left open, allowing to log into Kura without any user credentials over unencrypted telnet and executing commands using the Equinox "exec" command. As the process is running as "root" full control over the device can be acquired. IPv6 is also left in auto-configuration mode, accepting router advertisements automatically and assigns a MAC address based IPv6 address.

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

License Manager Service of YOKOGAWA products (CENTUM VP (R5.01.00 - R6.06.00), CENTUM VP Entry Class (R5.01.00 - R6.06.00), ProSafe-RS (R3.01.00 - R4.04.00), PRM (R4.01.00 - R4.02.00), B/M9000 VP(R7.01.01 - R8.02.03)) allows remote attackers to bypass access restriction to send malicious files to the PC where License Manager Service runs via unspecified vectors.

A Use of Client-Side Authentication issue was discovered in Advantech B+B SmartWorx MESR901 firmware versions 1.5.2 and prior. The web interface uses JavaScript to check client authentication and redirect unauthorized users. Attackers may intercept requests and bypass authentication to access restricted web pages.

PostgreSQL versions before 9.2.22, 9.3.18, 9.4.13, 9.5.8 and 9.6.4 are vulnerable to incorrect authentication flaw allowing remote attackers to gain access to database accounts with an empty password.

In ABB IP GATEWAY 3.39 and prior, by accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access the configuration files and application pages without authentication.

An unprivileged user of the Unitrends Enterprise Backup before 9.0.0 web server can escalate to root privileges by modifying the "token" cookie issued at login.

A remote attacker could bypass the Sandstorm organization restriction before build 0.203 via a comma in an email-address field.

Televes COAXDATA GATEWAY 1Gbps devices doc-wifi-hgw_v1.02.0014 4.20 do not check password.shtml authorization, leading to Arbitrary password change.

T-Com Speedport 500V routers with firmware 1.31 allow remote attackers to bypass authentication and reconfigure the device via a LOGINKEY=TECOM cookie value.

A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995.

An Authentication Bypass vulnerability exists in Gitea before 1.5.0, which could let a malicious user gain privileges. If captured, the TOTP code for the 2FA can be submitted correctly more than once.

xrdp 0.9.1 calls the PAM function auth_start_session() in an incorrect location, leading to PAM session modules not being properly initialized, with a potential consequence of incorrect configurations or elevation of privileges, aka a pam_limits.so bypass.

An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).

AVTECH AVN801 DVR has a security bypass via the administration login captcha

Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.

An issue was discovered in Zammad before 1.0.4, 1.1.x before 1.1.3, and 1.2.x before 1.2.1. Attackers can login with the hashed password itself (e.g., from the DB) instead of the valid password string.

Zoho ManageEngine Access Manager Plus before 4203 allows anyone to view a few data elements (e.g., access control details) and modify a few aspects of the application state.

An Authentication Bypass by Capture-Replay issue was discovered in Schneider Electric Modicon Modbus Protocol. Sensitive information is transmitted in cleartext in the Modicon Modbus protocol, which may allow an attacker to replay the following commands: run, stop, upload, and download.

Zoho ManageEngine PAM360 before build 5303 allows attackers to modify a few aspects of application state because of a filter bypass in which authentication is not required.

It was noticed that a malicious process impersonating an Impala daemon in Apache Impala (incubating) 2.7.0 to 2.8.0 could cause Impala daemons to skip authentication checks when Kerberos is enabled (but TLS is not). If the malicious server responds with 'COMPLETE' before the SASL handshake has completed, the client will consider the handshake as completed even though no exchange of credentials has happened.

The (1) REST and (2) memcache interfaces in the Hazelcast cluster API in Open-Xchange AppSuite 7.0.x before 7.0.2-rev15 and 7.2.x before 7.2.2-rev16 do not require authentication, which allows remote attackers to obtain sensitive information or modify data via an API call.

An exploitable vulnerability exists in the generation of authentication token functionality of Circle with Disney. Specially crafted network packets can cause a valid authentication token to be returned to the attacker resulting in authentication bypass. An attacker can send a series of packets to trigger this vulnerability.

The authentication algorithm of the WebHMI portal is sound, but the implemented mechanism can be bypassed as the result of a separate weakness that is primary to the authentication error.

OpUtils in Zoho ManageEngine OpManager 12.5 before 125490 mishandles authentication for a few audit directories.

logahead UNU 1.0 before 20061226 allows remote attackers to upload arbitrary files via unspecified vectors related to plugins/widged/_widged.php (aka the WidgEd plugin), possibly because of an authentication bypass. NOTE: some of these details are obtained from third party information.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains an Improper Authentication vulnerability that could potentially be exploited by malicious users to compromise the affected system.

EMC Isilon InsightIQ 4.1.0, 4.0.1, 4.0.0, 3.2.2, 3.2.1, 3.2.0, 3.1.1, 3.1.0, 3.0.1, 3.0.0 is affected by an authentication bypass vulnerability that could potentially be exploited by attackers to compromise the affected system.

In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26, use of the ap_get_basic_auth_pw() by third-party modules outside of the authentication phase may lead to authentication requirements being bypassed.

VCM5010 with software versions earlier before V100R002C50SPC100 has an authentication bypass vulnerability. This is due to improper implementation of authentication for accessing web pages. An unauthenticated attacker could bypass the authentication by sending a crafted HTTP request. 5010 with software versions earlier before V100R002C50SPC100 has an arbitrary file upload vulnerability. The software does not validate the files that uploaded. An authenticated attacker could upload arbitrary files to the system.

A vulnerability has been found in TOTOLINK T10 4.1.8cu.5241_B20210927. Affected is an unknown function of the file /formLoginAuth.htm. The manipulation of the argument authCode with the input 1 leads to improper authentication. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

lib/Auth/Source/External.php in the drupalauth module before 1.2.2 for simpleSAMLphp allows remote attackers to authenticate as an arbitrary user via the user name (uid) in a cookie.

The server components in Objectivity/DB 10.0 do not require authentication for administrative commands, which allows remote attackers to modify data, obtain sensitive information, or cause a denial of service by sending requests over TCP to (1) the Lock Server or (2) the Advanced Multithreaded Server, as demonstrated by commands that are ordinarily sent by the (a) ookillls and (b) oostopams applications. NOTE: some of these details are obtained from third party information.

WAPM-1166D firmware Ver.1.2.7 and earlier, WAPM-APG600H firmware Ver.1.16.1 and earlier allows remote attackers to bypass authentication and access the configuration interface via unspecified vectors.

Fresenius Kabi Vigilant Software Suite (Mastermed Dashboard) version 2.0.1.3 allows user input to be validated on the client side without authentication by the server. The server should not rely on the correctness of the data because users might not support or block JavaScript or intentionally bypass the client-side checks. An attacker with knowledge of the service user could circumvent the client-side control and login with service privileges.

An issue was discovered in Talend Data Catalog before 7.3-20210930. After setting up SAML/OAuth, authentication is not correctly enforced on the native login page. Any valid user from the SAML/OAuth provider can be used as the username with an arbitrary password, and login will succeed.

The CentralAuth extension for MediaWiki 1.19.x before 1.19.8, 1.20.x before 1.20.7, and 1.21.x before 1.21.2 caches a valid CentralAuthUser object in the centralauth_User cookie even when a user has not successfully logged in, which allows remote attackers to bypass authentication without a password.

Apache Shiro before 1.8.0, when using Apache Shiro with Spring Boot, a specially crafted HTTP request may cause an authentication bypass. Users should update to Apache Shiro 1.8.0.

Paid To Read Script 2.0.5 has authentication bypass in the admin panel via a direct request, as demonstrated by the admin/viewvisitcamp.php fn parameter and the admin/userview.php uid parameter.

The update function in umbraco.webservices/templates/templateService.cs in the TemplateService component in Umbraco CMS before 6.0.4 does not require authentication, which allows remote attackers to execute arbitrary ASP.NET code via a crafted SOAP request.

The UserPro plugin before 4.9.17.1 for WordPress, when used on a site with the "admin" username, allows remote attackers to bypass authentication and obtain administrative access via a "true" value for the up_auto_log parameter in the QUERY_STRING to the default URI.

importbuddy.php in the BackupBuddy plugin 1.3.4, 2.1.4, 2.2.25, 2.2.28, and 2.2.4 for WordPress allows remote attackers to bypass authentication via a crafted integer in the step parameter.

An authentication bypass exists in the web management interface in Belkin F5D8236-4 v2.

importbuddy.php in the BackupBuddy plugin 1.3.4, 2.1.4, 2.2.25, 2.2.28, and 2.2.4 for WordPress does not require that authentication be enabled, which allows remote attackers to obtain sensitive information, or overwrite or delete files, via vectors involving a (1) direct request, (2) step=1 request, (3) step=2 or step=3 request, or (4) step=7 request.