Out of the wired and wireless interfaces within MiR100, MiR200 and other vehicles from the MiR fleet, it's possible to access the Control Dashboard on a hardcoded IP address. Credentials to such wireless interface default to well known and widely spread users (omitted) and passwords (omitted). This information is also available in past User Guides and manuals which the vendor distributed. This flaw allows cyber attackers to take control of the robot remotely and make use of the default user interfaces MiR has created, lowering the complexity of attacks and making them available to entry-level attackers. More elaborated attacks can also be established by clearing authentication and sending network requests directly. We have confirmed this flaw in MiR100 and MiR200 but according to the vendor, it might also apply to MiR250, MiR500 and MiR1000.
One of the wireless interfaces within MiR100, MiR200 and possibly (according to the vendor) other MiR fleet vehicles comes pre-configured in WiFi Master (Access Point) mode. Credentials to such wireless Access Point default to well known and widely spread SSID (MiR_RXXXX) and passwords (omitted). This information is also available in past User Guides and manuals which the vendor distributed. We have confirmed this flaw in MiR100 and MiR200 but it might also apply to MiR250, MiR500 and MiR1000.
The SNMP daemon in UTStarcom F1000 VOIP WIFI Phone s2.0 running VxWorks 5.5.1 with kernel WIND 2.6 has hard-coded public credentials that cannot be changed, which allows attackers to obtain sensitive information.
A Use of Hard-Coded Cryptographic Key issue was discovered in MRD-305-DIN versions older than 1.7.5.0, and MRD-315, MRD-355, MRD-455 versions older than 1.7.5.0. The device utilizes hard-coded private cryptographic keys that may allow an attacker to decrypt traffic from any other source.
Cisco IP Phone (VoIP) 7920 1.0(8) contains certain hard-coded ("fixed") public and private SNMP community strings that cannot be changed, which allows remote attackers to obtain sensitive information.
DASAN H660RM devices with firmware 1.03-0022 use a hard-coded key for logs encryption. Data stored using this key can be decrypted by anyone able to access this key.
Milesight IP security cameras through 2016-11-14 have a hardcoded SSL private key under the /etc/config directory.
Milesight IP security cameras through 2016-11-14 have a default root password in /etc/shadow that is the same across different customers' installations.
dirary0.js on D-Link DIR-140L, DIR-640L devices allows remote unauthenticated attackers to discover admin credentials.
A CWE-798: Use of Hardcoded Credentials vulnerability exists in Modicon Controllers (All versions of the following CPUs and Communication Module product references listed in the Security Notifications), which could cause the disclosure of FTP hardcoded credentials when using the Web server of the controller on an unsecure network.
Premisys Identicard version 3.1.190 stores user credentials and other sensitive information with a known weak encryption method (MD5 hash of a salt and password).
Premisys Identicard version 3.1.190 stores backup files as encrypted zip files. The password to the zip is hard-coded and unchangeable. An attacker with access to these backups can decrypt them and obtain sensitive data.
"HCL AppScan Enterprise uses hard-coded credentials which can be exploited by attackers to get unauthorized access to application's encrypted files."
An issue was discovered in Scytl sVote 2.1. Due to the implementation of the database manager, an attacker can access the OrientDB by providing admin as the admin password. A different password cannot be set because of the implementation in code.
Use of a hard-coded cryptographic key to encrypt security sensitive data in local storage and configuration in FortiClient for Windows prior to 6.4.0 may allow an attacker with access to the local storage or the configuration backup file to decrypt the sensitive data via knowledge of the hard-coded key.
ifw8 Router ROM v4.31 allows credential disclosure by reading the action/usermanager.htm HTML source code.
An issue was discovered in iNextrix ASTPP before 4.0.1. web_interface/astpp/application/config/config.php does not have strong random keys, as demonstrated by use of the 8YSDaBtDHAB3EQkxPAyTz2I5DttzA9uR private key and the r)fddEw232f encryption key.
An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. The firmware image contains encrypted passwords that are used to authenticate users wishing to access a diagnostics or password-recovery menu. Using the hardcoded cryptographic key found elsewhere in the firmware, these passwords can be decrypted. This is related to fds_sys_passDebugPasswd_ret() and fds_sys_passRecoveryPasswd_ret() in libfds.so.0.0.
Medtronic Valleylab Exchange Client version 3.4 and below, Valleylab FT10 Energy Platform (VLFT10GEN) software version 4.0.0 and below, and Valleylab FX8 Energy Platform (VLFX8GEN) software version 1.1.0 and below use multiple sets of hard-coded credentials. If discovered, they can be used to read files on the device.
Ricoh SP C250DN 1.05 devices have a fixed password. FTP service credential were found to be hardcoded within the printer firmware. This would allow to an attacker to access and read information stored on the shared FTP folders.
Western Digital SSD Dashboard before 2.5.1.0 and SanDisk SSD Dashboard before 2.5.1.0 have Incorrect Access Control. The “generate reports” archive is protected with a hard-coded password. An application update that addresses the protection of archive encryption is available.
Milesight IP security cameras through 2016-11-14 have a default set of 10 privileged accounts with hardcoded credentials. They are accessible if the customer has not configured 10 actual user accounts.
iball Baton 150M iB-WRA150N v1 00000001 1.2.6 build 110401 Rel.47776n devices are prone to an authentication bypass vulnerability that allows remote attackers to view and modify administrative router settings by reading the HTML source code of the password.cgi file.
The onelogin-saml-sso plugin before 2.2.0 for WordPress has a hardcoded @@@nopass@@@ password for just-in-time provisioned users.
Hardcoded default root credentials exist on the ecobee3 lite 4.5.81.200 device. This allows a threat actor to gain access to the password-protected bootloader environment through the serial console.
An issue was discovered on FiberHome HG6245D devices through RP2613. The web daemon contains the hardcoded user / user1234 credentials for an ISP.
An attacker can gain VxWorks Shell after login due to hard-coded credentials on a KUKA KR C4 control software for versions prior to 8.7 or any product running KSS.
An issue was discovered in CommentsService.ashx in OnyakTech Comments Pro 3.8. An attacker can download a copy of the installer, decompile it, and discover a hardcoded IV used to encrypt the username and userid in the comment POST request. Additionally, the attacker can decrypt the encrypted encryption key (sent as a parameter in the comment form request) by setting this encrypted value as the username, which will appear on the comment page in its decrypted form. Using these two values (combined with the encryption functionality discovered in the decompiled installer), the attacker can encrypt another user's ID and username. These values can be used as part of the comment posting request in order to spoof the user.
An attacker can gain full access (read/write/delete) to sensitive folders due to hard-coded credentials on KUKA KR C4 control software for versions prior to 8.7 or any product running KSS.
In Weidmueller Industrial WLAN devices in multiple versions the usage of hard-coded cryptographic keys within the service agent binary allows for the decryption of captured traffic across the network from or to the device.
Akkadian Provisioning Manager Engine (PME) ships with a hard-coded credential, akkadianuser:haakkadianpassword. This issue was resolved in Akkadian OVA appliance version 3.0 (and later), Akkadian Provisioning Manager 5.0.2 (and later), and Akkadian Appliance Manager 3.3.0.314-4a349e0 (and later).
A vulnerability classified as critical has been found in IROAD X5 Mobile App up to 5.2.5 on Android. Affected is an unknown function of the component API Endpoint. The manipulation leads to hard-coded credentials. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
The default administrator account & password of the EDIMAX wireless network camera is hard-coded. Remote attackers can disassemble firmware to obtain the privileged permission and further control the devices.
IBM Security Identity Manager 7.0.2 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data. IBM X-Force ID: 200252.
An issue was discovered on FiberHome HG6245D devices through RP2613. The telnet daemon on port 23/tcp can be abused with the gpon/gpon credentials.
An issue was discovered on FiberHome HG6245D devices through RP2613. The web daemon contains the hardcoded f~i!b@e#r$h%o^m*esuperadmin / s(f)u_h+g|u credentials for an ISP.
An issue was discovered on FiberHome HG6245D devices through RP2613. The password for the enable command is gpon.
An issue was discovered on FiberHome HG6245D devices through RP2613. There is a password of four hexadecimal characters for the admin account. These characters are generated in init_3bb_password in libci_adaptation_layer.so.
An issue was discovered on FiberHome AN5506-04-FA devices with firmware RP2631. There is a gepon password for the gepon account.
An issue was discovered on FiberHome HG6245D devices through RP2613. The web management is done over HTTPS, using a hardcoded private key that has 0777 permissions.
An issue was discovered on FiberHome HG6245D devices through RP2613. A hardcoded GEPON password for root is defined inside /etc/init.d/system-config.sh.
A use of hard-coded cryptographic key vulnerability in the SSLVPN of FortiOS before 7.0.1 may allow an attacker to retrieve the key by reverse engineering.
An issue was discovered in svc-login.php in Void Aural Rec Monitor 9.0.0.1. Passwords are stored in unencrypted source-code text files. This was noted when accessing the svc-login.php file. The value is used to authenticate a high-privileged user upon authenticating with the server.
Usage of hard-coded cryptographic keys to encrypt configuration files and debug logs in FortiAuthenticator versions before 6.3.0 may allow an attacker with access to the files or the CLI configuration to decrypt the sensitive data, via knowledge of the hard-coded key.
A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Project data stored on the device, which is accessible via port 10005/tcp, can be decrypted due to a hardcoded encryption key. The security vulnerability could be exploited by an unauthenticated attacker with network access to port 10005/tcp. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confidentiality of the device. At the time of advisory publication no public exploitation of this security vulnerability was known.
The IMM2 First Failure Data Capture function collects management module logs and diagnostic information when a hardware error is detected. This information is made available for download through an SFTP server hosted on the IMM2 management network interface. In versions earlier than 4.90 for Lenovo System x and earlier than 6.80 for IBM System x, the credentials to access the SFTP server are hard-coded and described in the IMM2 documentation, allowing an attacker with management network access to obtain the collected FFDC data. After applying the update, the IMM2 will create random SFTP credentials for use with OneCLI.
Philips e-Alert Unit (non-medical device), Version R2.1 and prior. The software contains hard-coded cryptographic key, which it uses for encryption of internal data.
QNAP VioCard 300 has hardcoded RSA private keys.
Xerox ColorCube and WorkCenter devices in 2013 had hardcoded FTP and shell user accounts.
A vulnerability involving insecure storage of sensitive information has been reported to affect QSW-M2116P-2T2S and QNAP switches running QuNetSwitch. If exploited, this vulnerability allows remote attackers to read sensitive information by accessing the unrestricted storage mechanism.We have already fixed this vulnerability in the following versions: QSW-M2116P-2T2S 1.0.6 build 210713 and later QGD-1600P: QuNetSwitch 1.0.6.1509 and later QGD-1602P: QuNetSwitch 1.0.6.1509 and later QGD-3014PT: QuNetSwitch 1.0.6.1519 and later