Grandstream GXV3370 before 1.0.1.41 and WP820 before 1.0.3.6 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in a /manager?action=getlogcat priority field.

Grandstream GWN7000 before 1.0.6.32 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/uci.apply update_nds_webroot_from_tmp API call.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via HTTP. An authenticated remote attacker can execute commands as the root user by sending a crafted HTTP GET to the UCM's "Old" HTTPS API.

Grandstream GWN7000 firmware version 1.0.9.4 and below allows authenticated remote users to modify the system's crontab via undocumented API. An attacker can use this functionality to execute arbitrary OS commands on the router.

Grandstream GXV3611IR_HD before 1.0.3.23 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the /goform/systemlog?cmd=set logserver field.

Grandstream UCM6204 before 1.0.19.20 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the backupUCMConfig file-backup parameter to the /cgi? URI.

The Grandstream UCM Series IP PBX before firmware version 1.0.20.52 is affected by a parameter injection vulnerability in the HTTP interface. A remote and authenticated attacker can execute arbitrary code by sending a crafted HTTP request. Authentication may be possible using a default user and password. Affected models are the UCM6202, UCM6204, UCM6208, and UCM6510.

Multiple buffer overflows in the limited configuration shell (/sbin/gs_config) on Grandstream HT801 devices before 1.0.29 allow remote authenticated users to execute arbitrary code as root via a crafted manage_if setting, thus bypassing the intended restrictions of this shell and taking full control of the device. There are default weak credentials that can be used to authenticate.

Grandstream GXP1600 series firmware 1.0.4.152 and below is vulnerable to authenticated remote command execution when an attacker adds an OpenVPN up script to the phone's VPN settings via the "Additional Settings" field in the web interface. When the VPN's connection is established, the user defined script is executed with root privileges.

Grandstream HT800 series firmware version 1.0.17.5 and below contain a backdoor in the SSH service. An authenticated remote attacker can obtain a root shell by correctly answering a challenge prompt.

Grandstream UCM6204 before 1.0.19.20 devices allow remote authenticated users to conduct SQL injection attacks via the sord parameter in a listCodeblueGroup API call to the /cgi? URI.

An issue was discovered on the Grandstream HT801 Analog Telephone Adaptor before 1.0.29.8. From the limited configuration shell, it is possible to set the malicious gdb_debug_server variable. As a result, after a reboot, the device downloads and executes malicious scripts from an attacker-defined host.

Grandstream GXP1600 series firmware 1.0.4.152 and below is vulnerable to authenticated remote command execution when an attacker uploads a specially crafted tar file to the HTTP /cgi-bin/upload_vpntar interface.

An os command injection vulnerability exists in the CWMP SelfDefinedTimeZone functionality of Grandstream GXP2135 1.0.9.129, 1.0.11.74 and 1.0.11.79. A specially crafted network packet can lead to arbitrary command execution. An attacker can send a sequence of malicious packets to trigger this vulnerability.

Shell Metacharacter Injection in the SSH configuration interface on Grandstream GXP16xx VoIP 1.0.4.128 phones allows attackers to execute arbitrary system commands and gain a root shell.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via HTTP. An authenticated remote attacker can bypass command injection mitigations and execute commands as the root user by sending a crafted HTTP POST to the UCM's "New" HTTPS API.

Grandstream UCM6200 series firmware version 1.0.20.23 and below is vulnerable to OS command injection via SSH. An authenticated remote attacker can execute commands as the root user by issuing a specially crafted "unset" command.

Grandstream GAC2500 1.0.3.35, GXP2200 1.0.3.27, GVC3202 1.0.3.51, GXV3275 before 1.0.3.219 Beta, and GXV3240 before 1.0.3.219 Beta devices allow unauthenticated remote code execution via shell metacharacters in a /manager?action=getlogcat priority field, in conjunction with a buffer overflow (via the phonecookie cookie) to overwrite a data structure and consequently bypass authentication. This can be exploited remotely or via CSRF because the cookie can be placed in an Accept HTTP header in an XMLHttpRequest call to lighttpd.

Grandstream GWN7000 before 1.0.6.32 and GWN7610 before 1.0.8.18 devices allow remote authenticated users to discover passwords via a /ubus/uci.apply config request.

Grandstream HT800 series firmware version 1.0.17.5 and below is vulnerable to an OS command injection vulnerability. Unauthenticated remote attackers can execute arbitrary commands as root by crafting a special configuration file and sending a crafted SIP message.

Vulnerability in rconfig “remote_text_file” enables an attacker with user level access to the CLI to inject user level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “check_vertica_upgrade” value for the “cpIp” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

D-Link DIR-823X firmware - 240126 was discovered to contain a remote command execution (RCE) vulnerability via the dhcpd_startip parameter at /goform/set_lan_settings.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “feed_comm_test” value for the “feed” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Vulnerability in rconfig “date” enables an attacker with user level access to the CLI to inject root level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setModifyVpnUser. Authenticated Attackers can send malicious packet to execute arbitrary commands.

ShopXO v1.8.1 has a command execution vulnerability. Attackers can use this vulnerability to execute arbitrary commands and gain control of the server.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setUrlFilterRules. Authenticated Attackers can send malicious packet to execute arbitrary commands.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setAccessDeviceCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

A vulnerability has been found in Tenda W30E 1.0.1.25(633) and classified as critical. This vulnerability affects the function formWriteFacMac of the file /goform/WriteFacMac. The manipulation of the argument mac leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-260914 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

In Apache Airflow, prior to version 2.2.4, some example DAGs did not properly sanitize user-provided params, making them susceptible to OS Command Injection from the web UI.

/graphStatus/displayServiceStatus.php in Centreon 19.10.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the RRDdatabase_path parameter.

mySCADA myPRO versions 8.26.0 and prior has parameters which an authenticated user could exploit to inject arbitrary operating system commands.

The snaptPowered2 component of Snapt Aria v12.8 was discovered to contain a command injection vulnerability. This vulnerability allows authenticated attackers to execute arbitrary commands.

The administrative web interface in Cisco TelePresence Video Communication Server Expressway X8.5.2 allows remote authenticated users to execute arbitrary commands via crafted fields, aka Bug ID CSCuv12531.

Vulnerability in Fidelis Network and Deception CommandPost enables authenticated command injection through the web interface using the “update_checkfile” value for the “filename” parameter. The vulnerability could allow a specially crafted HTTP request to execute system commands on the CommandPost and return results in an HTTP response via an authenticated session. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

Zyxel VMG5313-B30B router on firmware 5.13(ABCJ.6)b3_1127, and possibly older versions of firmware are affected by shell injection.

A Command Injection vulnerability exists in the do_upgrade_post function of the httpd binary in Linksys E1500 v1.0.06.001. As a result, an authenticated attacker can execute OS commands with root privileges.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setWanIeCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

Jenkins Perfecto Plugin 1.17 and earlier executes a command on the Jenkins controller, allowing attackers with Job/Configure permission to run arbitrary commands on the Jenkins controller

An OS Command Injection vulnerability in gRPC Network Operations Interface (gNOI) server module of Juniper Networks Junos OS Evolved allows an authenticated, low privileged, network based attacker to inject shell commands and execute code. This issue affects Juniper Networks Junos OS Evolved 21.4 version 21.4R1-EVO and later versions prior to 22.1R1-EVO.

Dell PowerProtect DD, versions prior to 8.0, LTS 7.13.1.0, LTS 7.10.1.30, LTS 7.7.5.40 contain an OS command injection vulnerability in an admin operation. A remote low privileged attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the system application's underlying OS with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker.

WFS-SR03 v1.0.3 was discovered to contain a command injection vulnerability via the sys_smb_pwdmod function.

A authenticated remote command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): 6.10.4 and below, 6.9.9 and below, 6.8.9-HF2 and below, 6.7.x and below. Aruba has released updates to ClearPass Policy Manager that address this security vulnerability.

Vulnerability in rconfig “cert_utils” enables an attacker with user level access to the CLI to inject root level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

A component for parsing OXMF templates could be abused to execute arbitrary system commands that would be executed as the non-privileged runtime user. Users and attackers could run system commands with limited privilege to gain unauthorized access to confidential information and potentially violate integrity by modifying resources. The template engine has been reconfigured to deny execution of harmful commands on a system level. No publicly available exploits are known.

An authenticated mySCADA myPRO 8.26.0 user may be able to modify parameters to run commands directly in the operating system.

Nextcloud server is an open source home cloud implementation. In affected versions a missing scope validation allowed users to create workflows which are designed to be only available for administrators. Some workflows are designed to be RCE by invoking defined scripts, in order to generate PDFs, invoking webhooks or running scripts on the server. Due to this combination depending on the available apps the issue can result in a RCE at the end. It is recommended that the Nextcloud Server is upgraded to 24.0.10 or 25.0.4. Users unable to upgrade should disable app `workflow_scripts` and `workflow_pdf_converter` as a mitigation.

**UNSUPPORTED WHEN ASSIGNED** A post-authentication command injection vulnerability in the management commands of the legacy DSL CPE Zyxel VMG4325-B10A firmware version 1.00(AAFR.4)C0_20170615 could allow an authenticated attacker to execute operating system (OS) commands on an affected device via Telnet.

ASUS RT-AC86U does not filter special characters for parameters in specific web URLs. A remote attacker with normal user privileges can exploit this vulnerability to perform command injection attack to execute arbitrary system commands, disrupt system or terminate service.