Tenda AX1806 v1.0.0.1 was discovered to contain a command injection vulnerability in `SetIPv6Status` function

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 11 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 2 of 46).

Quest DR Series Disk Backup software version before 4.0.3.1 allows command injection (issue 32 of 46).

A security vulnerability has been detected in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function addStaticRoute of the file /goform/addStaticRoute. Such manipulation of the argument staticRoute_IP_setting/staticRoute_Netmask_setting/staticRoute_Gateway_setting/staticRoute_Metric_setting/staticRoute_destType_setting leads to os command injection. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This affects the function RP_setBasicAuto of the file /goform/RP_setBasicAuto. The manipulation of the argument staticIp/staticNetmask leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this vulnerability is the function setDeviceName of the file /goform/setDeviceName. The manipulation of the argument DeviceName leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A command injection remote command execution vulnerability in Trend Micro Email Encryption Gateway 5.5 could allow a remote attacker to execute arbitrary code on vulnerable installations due to a flaw in the LauncherServer. Authentication is required to exploit this vulnerability.

D-Link DIR-615 2.5.17 devices allow Remote Code Execution via shell metacharacters in the Host field of the System / Traceroute screen.

A vulnerability was identified in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. This issue affects the function RP_setBasic of the file /goform/RP_setBasic. The manipulation of the argument bssid leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in agentUniverse up to 0.0.18 and classified as critical. This issue affects the function StdioServerParameters of the component MCPSessionManager/MCPTool/MCPToolkit. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function sub_3517C of the file /goform/setWan. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

OpenEMR version 5.0.0 contains a OS Command Injection vulnerability in fax_dispatch.php that can result in OS command injection by an authenticated attacker with any role. This vulnerability appears to have been fixed in 5.0.0 Patch 2 or higher.

We have recently released new version of UniFi Protect firmware v1.13.3 and v1.14.10 for Unifi Cloud Key Gen2 Plus and UniFi Dream Machine Pro/UNVR respectively that fixes vulnerabilities found on Protect firmware v1.13.2, v1.14.9 and prior according to the description below:View only users can run certain custom commands which allows them to assign themselves unauthorized roles and escalate their privileges.

A vulnerability has been found in Linksys RE6250, RE6300, RE6350, RE6500, RE7000 and RE9000 up to 20250801. Affected by this issue is the function setDFSSetting of the file /goform/setLan. The manipulation of the argument lanNetmask/lanIp leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 may allow remote attackers to execute arbitrary code on affected installations. Authentication is required to exploit this vulnerability.

A vulnerability, which was classified as critical, has been found in TOTOLINK N200RE 9.3.5u.6095_B20200916/9.3.5u.6139_B20201216. Affected by this issue is the function sub_41A0F8 of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument Hostname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Moxa MGate 5105-MB-EIP firmware version 4.1. Authentication is required to exploit this vulnerability. The specific flaw exists within the DestIP parameter within MainPing.asp. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-9552.

A vulnerability in the web-based UI of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware before 11.2(1) could allow an authenticated, remote attacker to perform a command injection and execute commands with the privileges of the web server. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including arbitrary shell commands in a specific user input field. Cisco Bug IDs: CSCvi51426.

Command injection vulnerability in date of QNAP Q'center Virtual Appliance version 1.7.1063 and earlier could allow authenticated users to run arbitrary commands.

A vulnerability in the NX-API management application programming interface (API) in devices running, or based on, Cisco NX-OS Software could allow an authenticated, remote attacker to execute commands with elevated privileges. The vulnerability is due to a failure to properly validate certain parameters included within an NX-API request. An attacker that can successfully authenticate to the NX-API could submit a request designed to bypass NX-OS role assignment. A successful exploit could allow the attacker to execute commands with elevated privileges. This vulnerability affects the following if configured to use the NX-API feature: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvc73177, CSCve40903, CSCve40911.

A vulnerability, which was classified as critical, was found in D-Link DI-7300G+ and DI-8200G 17.12.20A1/19.12.25A1. This affects an unknown part of the file msp_info.htm. The manipulation of the argument flag/cmd/iface leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the web management GUI of the Cisco D9800 Network Transport Receiver could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of GUI command arguments. An attacker could exploit this vulnerability by injecting crafted arguments into a vulnerable GUI command. An exploit could allow the attacker to execute commands on the underlying BusyBox operating system. These commands are run at the privilege level of the authenticated user. The attacker needs valid device credentials for this attack. Cisco Bug IDs: CSCvg74691.

An OS command injection vulnerability exists in the httpd wlscan_ASP functionality of InHand Networks InRouter302 V3.5.4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Pi-hole Web v4.3.2 (aka AdminLTE) allows Remote Code Execution by privileged dashboard users via a crafted DHCP static lease.

A vulnerability in role-based access control (RBAC) for Cisco NX-OS Software could allow an authenticated, remote attacker to execute CLI commands that should be restricted for a nonadministrative user. The attacker would have to possess valid user credentials for the device. The vulnerability is due to incorrect RBAC privilege assignment for certain CLI commands. An attacker could exploit this vulnerability by authenticating to a device as a nonadministrative user and executing specific commands from the CLI. An exploit could allow the attacker to run commands that should be restricted to administrative users. These commands could modify the configuration or boot image on the device. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd77904.

A vulnerability was found in Belkin F9K1122 1.00.33. It has been classified as critical. This affects the function mp of the file /goform/mp of the component webs. The manipulation of the argument command leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Command injection vulnerability in networking of QNAP Q'center Virtual Appliance version 1.7.1063 and earlier could allow authenticated users to run arbitrary commands.

This vulnerability allows remote attackers to execute arbitrary code on affected installations of Microhard Bullet-LTE prior to v1.2.0-r1112. Authentication is required to exploit this vulnerability. The specific flaw exists within the handling of the ping parameter provided to tools.sh. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-10595.

Jenkins Pipeline: Shared Groovy Libraries Plugin 552.vd9cc05b8a2e1 and earlier uses the same checkout directories for distinct SCMs for Pipeline libraries, allowing attackers with Item/Configure permission to invoke arbitrary OS commands on the controller through crafted SCM contents.

Jenkins Pipeline: Multibranch Plugin 706.vd43c65dec013 and earlier uses the same checkout directories for distinct SCMs for the readTrusted step, allowing attackers with Item/Configure permission to invoke arbitrary OS commands on the controller through crafted SCM contents.

The package ng-packagr before 10.1.1 are vulnerable to Command Injection via the styleIncludePaths option.

IPFire 2.19 has a Remote Command Injection vulnerability in ids.cgi via the OINKCODE parameter, which is mishandled by a shell. This can be exploited directly by authenticated users, or through CSRF.

A vulnerability has been found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this vulnerability is the function formSetWanStatic of the file /goform/formSetWanStatic of the component webs. The manipulation of the argument m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 is directly passed by the attacker/so we can control the m_wan_ipaddr/m_wan_netmask/m_wan_gateway/m_wan_staticdns1/m_wan_staticdns2 leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Belkin F9K1122 1.00.33 and classified as critical. Affected by this issue is the function formBSSetSitesurvey of the file /goform/formBSSetSitesurvey of the component webs. The manipulation of the argument wan_ipaddr/wan_netmask/wan_gateway/wl_ssid is directly passed by the attacker/so we can control the wan_ipaddr/wan_netmask/wan_gateway/wl_ssid leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Netgear D6400 1.0.0.114. This affects an unknown part of the file diag.cgi. The manipulation of the argument host_name leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early and confirmed the existence of the vulnerability. They reacted very quickly, professional and kind. This vulnerability only affects products that are no longer supported by the maintainer.

This affects the package json before 10.0.0. It is possible to inject arbritary commands using the parseLookup function.

A vulnerability classified as critical has been found in D-Link DI-7300G+ 19.12.25A1. Affected is an unknown function of the file wget_test.asp. The manipulation of the argument url leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A high severity vulnerability was found in all active versions of Red Hat CloudForms before 5.11.7.0. The out of band OS command injection vulnerability can be exploited by authenticated attacker while setuping conversion host through Infrastructure Migration Solution. This flaw allows attacker to execute arbitrary commands on CloudForms server.

A vulnerability, which was classified as critical, has been found in D-Link DI-7300G+ 19.12.25A1. Affected by this issue is some unknown functionality of the file in proxy_client.asp. The manipulation of the argument proxy_srv/proxy_lanport/proxy_lanip/proxy_srvport leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

Jenkins Pipeline: Groovy Plugin 2648.va9433432b33c and earlier uses the same checkout directories for distinct SCMs when reading the script file (typically Jenkinsfile) for Pipelines, allowing attackers with Item/Configure permission to invoke arbitrary OS commands on the controller through crafted SCM contents.

codecov-node npm module before 3.6.5 allows remote attackers to execute arbitrary commands.The value provided as part of the gcov-root argument is executed by the exec function within lib/codecov.js. This vulnerability exists due to an incomplete fix of CVE-2020-7596.

A vulnerability classified as critical was found in Tenda O3V2 1.0.0.12(3880). This vulnerability affects the function fromNetToolGet of the file /goform/setPingInfo of the component httpd. The manipulation of the argument domain leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

Codecov npm module before 3.6.2 allows remote attackers to execute arbitrary commands via the "gcov-args" argument.

Command injection vulnerability in ftpd in Synology Router Manager (SRM) before 1.1.7-6941-1 allows remote authenticated users to execute arbitrary OS commands via the (1) MKD or (2) RMD command.

Vulnerability in rconfig “remote_text_file” enables an attacker with user level access to the CLI to inject user level commands into Fidelis Network and Deception CommandPost, Collector, Sensor, and Sandbox components as well as neighboring Fidelis components. The vulnerability is present in Fidelis Network and Deception versions prior to 9.4.5. Patches and updates are available to address this vulnerability.

This affects the package systeminformation before 4.27.11. This package is vulnerable to Command Injection. The attacker can concatenate curl's parameters to overwrite Javascript files and then execute any OS commands.

contentHostProperties.php in Rasilient PixelStor 5000 K:4.0.1580-20150629 (KDI Version) allows authenticated attackers to remotely execute code via the name parameter.

A vulnerability has been found in Xuxueli xxl-job up to 3.1.1 and classified as critical. Affected by this vulnerability is the function commandJobHandler of the file src\main\java\com\xxl\job\executor\service\jobhandler\SampleXxlJob.java. The manipulation leads to os command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

D-Link DSL-GS225 J1 AU_1.0.4 devices allow an admin to execute OS commands by placing shell metacharacters after a supported CLI command, as demonstrated by ping -c1 127.0.0.1; cat/etc/passwd. The CLI is reachable by TELNET.