GE UR firmware versions prior to version 8.1x web server interface is supported on UR over HTTP protocol. It allows sensitive information exposure without authentication.

NETSAS Enigma NMS 65.0.0 and prior does not encrypt sensitive data rendered within web pages. It is possible for an attacker to expose unencrypted sensitive data.

pam_ldap and nss_ldap, when used with OpenLDAP and connecting to a slave using TLS, does not use TLS for the subsequent connection if the client is referred to a master, which may cause a password to be sent in cleartext and allows remote attackers to sniff the password.

Jenkins SCTMExecutor Plugin 2.2 and earlier transmits previously configured service credentials in plain text as part of the global configuration, as well as individual jobs' configurations.

A vulnerability exists in libgwenhywfar through 4.12.0 due to the usage of outdated bundled CA certificates.

NETSAS Enigma NMS 65.0.0 and prior utilises basic authentication over HTTP for enforcing access control to the web application. The use of weak authentication transmitted over cleartext protocols can allow an attacker to steal username and password combinations by intercepting authentication traffic in transit.

Procom NetFORCE 800 4.02 M10 Build 20 and possibly other versions sends the NIS password map (passwd.nis) as a file attachment in diagnostic e-mail messages, which allows remote attackers to obtain the cleartext NIS password hashes.

DTEN D5 before 1.3 and D7 before 1.3 devices transfer customer data files via unencrypted HTTP.

A CWE-319: Cleartext transmission of sensitive information vulnerability exists in PowerLogic ION7400, ION7650, ION7700/73xx, ION83xx/84xx/85xx/8600, ION8650, ION8800, ION9000 and PM800 (see notification for affected versions), that could cause disclosure of user credentials when a malicious actor intercepts Telnet network traffic between a user and the device.

A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.

A CWE-319: Cleartext transmission of sensitive information vulnerability exists in PowerLogic ION7400, ION7650, ION83xx/84xx/85xx/8600, ION8650, ION8800, ION9000 and PM800 (see notification for affected versions), that could cause disclosure of user credentials when a malicious actor intercepts HTTP network traffic between a user and the device.

The Voo branded NETGEAR CG3700b custom firmware V2.02.03 uses HTTP Basic Authentication over cleartext HTTP.

When Connect workers in Apache Kafka 2.0.0, 2.0.1, 2.1.0, 2.1.1, 2.2.0, 2.2.1, or 2.3.0 are configured with one or more config providers, and a connector is created/updated on that Connect cluster to use an externalized secret variable in a substring of a connector configuration property value, then any client can issue a request to the same Connect cluster to obtain the connector's task configuration and the response will contain the plaintext secret rather than the externalized secrets variables.

Anviz access control devices perform cleartext transmission of sensitive information (passwords/pins and names) when replying to query on port tcp/5010.

Wrongthink peer-to-peer, end-to-end encrypted messenger with PeerJS and Axolotl ratchet. In wrongthink from version 2.0.0 and before 2.3.0 there was a set of vulnerabilities causing inadequate encryption strength. Part of the secret identity key was disclosed by the fingerprint used for connection. Additionally, the safety number was improperly calculated. It was computed using part of one of the public identity keys instead of being derived from both public identity keys. This caused issues in computing safety numbers which would potentially be exploitable in the real world. Additionally there was inadequate encryption strength due to use of 1024-bit DSA keys. These issues are all fixed in version 2.3.0.

Jenkins Aqua Security Scanner Plugin 3.0.17 and earlier transmitted configured credentials in plain text as part of the global Jenkins configuration form, potentially resulting in their exposure.

Jenkins Inedo BuildMaster Plugin 2.4.0 and earlier transmitted configured credentials in plain text as part of the global Jenkins configuration form, potentially resulting in their exposure.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 196188.

Jenkins Inedo ProGet Plugin 1.2 and earlier transmitted configured credentials in plain text as part of the global Jenkins configuration form, potentially resulting in their exposure.

Jenkins SourceGear Vault Plugin transmits configured credentials in plain text as part of job configuration forms, potentially resulting in their exposure.

A vulnerability was found in ISS BlackICE PC Protection. It has been declared as problematic. Affected by this vulnerability is the component Update Handler which allows cleartext transmission of data. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Jenkins Aqua MicroScanner Plugin 1.0.7 and earlier transmitted configured credentials in plain text as part of the global Jenkins configuration form, potentially resulting in their exposure.

Cleartext Transmission of Sensitive InformationCleartext transmission of sensitive information vulnerability in MELSEC iQ-R series Safety CPU R08/16/32/120SFCPU firmware versions "26" and prior and MELSEC iQ-R series SIL2 Process CPU R08/16/32/120PSFCPU firmware versions "11" and prior allows a remote unauthenticated attacker to login to a target CPU module by obtaining credentials other than password.

In Fibaro Home Center 2 and Lite devices in all versions provide a web based management interface over unencrypted HTTP protocol. Communication between the user and the device can be eavesdropped to hijack sessions, tokens and passwords.

The Network Attached Storage (NAS) Administration Web Page for Iomega NAS A300U transmits passwords in cleartext, which allows remote attackers to sniff the administrative password.

Netgear Nighthawk R6700 version 1.0.4.120 does not utilize secure communication methods to the web interface. By default, all communication to/from the device's web interface is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext.

Netgear Nighthawk R6700 version 1.0.4.120 does not utilize secure communication methods to the SOAP interface. By default, all communication to/from the device's SOAP Interface (port 5000) is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext

The Citytv Video application 4.08.0 for Android and 3.35 for iOS sends Unencrypted Analytics.

A CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists which could leak sensitive information transmitted between the software and the Modicon M218, M241, M251, and M258 controllers.

**VERSION NOT SUPPORTED WHEN ASSIGNED** A vulnerability could cause certain data to be visible on the network when the 'password' feature is enabled. This vulnerability was discovered in and remediated in versions v4.9.1 and v4.10.1 on May 30, 2013. The 'password' feature is an additional optional check performed by TS1131 that it is connected to a specific controller. This data is sent as clear text and is visible on the network. This feature is not present in TriStation 1131 versions v4.9.1 and v4.10.1 through current. Therefore, the vulnerability is not present in these versions.

In Moxa ioLogik 2500 series firmware, Version 3.0 or lower, and IOxpress configuration utility, Version 2.3.0 or lower, sensitive information is transmitted over some web applications in clear text.

SAP Business Objects Business Intelligence Platform (CMC), version 4.1, 4.2, shows cleartext password in the response, leading to Information Disclosure. It involves social engineering in order to gain access to system and If password is known, it would give administrative rights to the attacker to read/modify delete the data and rights within the system.

"If port encryption is not enabled on the Domino Server, HCL Nomad on Android and iOS Platforms will communicate in clear text and does not currently have a user interface option to change the setting to request an encrypted communication channel with the Domino server. This can potentially expose sensitive information including but not limited to server names, user IDs and document content."

IBM API Connect V10 is impacted by insecure communications during database replication. As the data replication happens over insecure communication channels, an attacker can view unencrypted data leading to a loss of confidentiality.

Cleartext transmission of sensitive information via Moxa Service in NPort IA5000A series serial devices. Successfully exploiting the vulnerability could enable attackers to read authentication data, device configuration, and other sensitive data transmitted over Moxa Service.

Cleartext Transmission of Sensitive Information vulnerability in BASETech GE-131 BT-1837836 firmware 20180921 exists which could leak sensitive information transmitted between the mobile app and the camera device.

Cleartext transmission of sensitive information. The following products are affected: Acronis Cyber Protect 15 (Windows) before build 29240

DJI drone devices sold in 2017 through 2022 broadcast unencrypted information about the drone operator's physical location via the AeroScope protocol.

The affected Reolink P2P products do not sufficiently protect data transferred between the local device and Reolink servers. This can allow an attacker to access sensitive information, such as camera feeds.

The affected product transmits unencrypted sensitive information, which may allow an attacker to access this information on the NIO 50 (all versions).

A flaw was found in the Linux kernel in versions before 5.9-rc7. Traffic between two Geneve endpoints may be unencrypted when IPsec is configured to encrypt traffic for the specific UDP port used by the GENEVE tunnel allowing anyone between the two endpoints to read the traffic unencrypted. The main threat from this vulnerability is to data confidentiality.

The built-in WEB server for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower stores and transmits the credentials of third-party services in cleartext.

Jenkins Email Extension Plugin 2.72 and 2.73 transmits and displays the SMTP password in plain text as part of the global Jenkins configuration form, potentially resulting in its exposure.

A vulnerability has been identified in SICAM T (All versions < V3.0). Affected devices do not encrypt web traffic with clients but communicate in cleartext via HTTP. This could allow an unauthenticated attacker to capture the traffic and interfere with the functionality of the device.

Jenkins OpenShift Deployer Plugin 1.2.0 and earlier transmits configured credentials in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.

LaraCMS v1.0.1 transmits sensitive information in cleartext which can be intercepted by attackers.

Jenkins Logstash Plugin 2.3.1 and earlier transmits configured credentials in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.

Jenkins Repository Connector Plugin 1.2.6 and earlier transmits configured credentials in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.

Jenkins Quality Gates Plugin 2.5 and earlier transmits configured credentials in plain text as part of its global Jenkins configuration form, potentially resulting in their exposure.

An issue was discovered in Django 1.11 before 1.11.22, 2.1 before 2.1.10, and 2.2 before 2.2.3. An HTTP request is not redirected to HTTPS when the SECURE_PROXY_SSL_HEADER and SECURE_SSL_REDIRECT settings are used, and the proxy connects to Django via HTTPS. In other words, django.http.HttpRequest.scheme has incorrect behavior when a client uses HTTP.