Orthanc server prior to version 1.5.8 does not enable basic authentication by default when remote access is enabled. This could result in unauthorized access by an attacker.

Instantel Micromate lacks authentication on a configuration port which could allow an attacker to execute commands if connected.

The InWave Jobs plugin for WordPress is vulnerable to privilege escalation via password reset in all versions up to, and including, 3.5.1. This is due to the plugin not properly validating a user's identity prior to updating their password. This makes it possible for unauthenticated attackers to change arbitrary user's passwords, including administrators, and leverage that to gain access to their account.

The Dingtian DT-R0 Series is vulnerable to an exploit that allows attackers to bypass login requirements by directly navigating to the main page.

ACTi cameras including the D, B, I, and E series using firmware version A1D-500-V6.11.31-AC fail to properly restrict access to the factory reset page. An unauthenticated, remote attacker can exploit this vulnerability by directly accessing the http://x.x.x.x/setup/setup_maintain_firmware-default.html page. This will allow an attacker to perform a factory reset on the device, leading to a denial of service condition or the ability to make use of default credentials (CVE-2017-3186).

Improper authentication vulnerability exists in KB-AHR series and KB-IRIP series. If this vulnerability is exploited, an arbitrary OS command may be executed on the product or the device settings may be altered. Affected products and versions are as follows: KB-AHR04D versions prior to 91110.1.101106.78, KB-AHR08D versions prior to 91210.1.101106.78, KB-AHR16D versions prior to 91310.1.101106.78, KB-IRIP04A versions prior to 95110.1.100290.78A, KB-IRIP08A versions prior to 95210.1.100290.78A, and KB-IRIP16A versions prior to 95310.1.100290.78A.

The airPASS from NetVision Information has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to access the specific administrative functionality to retrieve * all accounts and passwords.

The Four-Faith F3x36 router using firmware v2.0.0 is vulnerable to an authentication bypass vulnerability in the administrative web server. Authentication is not enforced on some administrative functionality when using the "bapply.cgi" endpoint instead of the normal "apply.cgi" endpoint. A remote and unauthenticated can use this vulnerability to modify settings or chain with existing authenticated vulnerabilities.

It is identified a vulnerability of insufficient authentication in the system configuration interface of Hitron Technologies CODA-5310. An unauthorized remote attacker can exploit this vulnerability to access system configuration interface, resulting in performing arbitrary system operation or disrupt service.

Enterprise Cloud Database from Ragic does not authenticate access to specific functionality, allowing unauthenticated remote attackers to use this functionality to obtain any user's session cookie.

Vendor: The Apache Software Foundation Versions Affected: Apache OpenMeetings from 2.0.0 before 7.0.0 Description: Attacker can elevate their privileges in any room

The BookIt plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 2.3.7. This is due to insufficient verification on the user being supplied during booking an appointment through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.

Array Networks Array AG Series and vxAG (9.4.0.481 and earlier) allow remote code execution. An attacker can browse the filesystem on the SSL VPN gateway using a flags attribute in an HTTP header without authentication. The product could then be exploited through a vulnerable URL. The 2023-03-09 vendor advisory stated "a new Array AG release with the fix will be available soon."

Orca HCM from LEARNING DIGITAL has an Missing Authentication vulnerability, allowing unauthenticated remote attacker to exploit this functionality to create an account with administrator privilege and subsequently use it to log in.

The User Email Verification for WooCommerce plugin for WordPress is vulnerable to authentication bypass via authenticate_user_by_email in versions up to, and including, 3.5.0. This is due to a random token generation weakness in the resend_verification_email function. This allows unauthenticated attackers to impersonate users and trigger an email address verification for arbitrary accounts, including administrative accounts, and automatically be logged in as that user, including any site administrators. This requires the Allow Automatic Login After Successful Verification setting to be enabled, which it is not by default.

Due to missing authentication and input sanitization of code the EventLogServiceCollector of SAP Diagnostics Agent - version 720, allows an attacker to execute malicious scripts on all connected Diagnostics Agents running on Windows. On successful exploitation, the attacker can completely compromise confidentiality, integrity and availability of the system.

The LatePoint plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.0.12. This is due to insufficient verification on the user being supplied during the booking customer step. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the user id. Note that logging in as a WordPress user is only possible if the "Use WordPress users as customers" setting is enabled, which is disabled by default. The vulnerability is partially patched in version 5.0.12 and fully patched in version 5.0.13.

A design flaw issue was found in the Red Hat OpenStack Platform director use of TripleO to enable libvirtd based live-migration. Libvirtd is deployed by default (by director) listening on 0.0.0.0 (all interfaces) with no-authentication or encryption. Anyone able to make a TCP connection to any compute host IP address, including 127.0.0.1, other loopback interface addresses, or in some cases possibly addresses that have been exposed beyond the management interface, could use this to open a virsh session to the libvirtd instance and gain control of virtual machine instances or possibly take over the host.

LightCMS v1.3.7 was discovered to contain a remote code execution (RCE) vulnerability via the image:make function.

Even if the authentication fails for local service authentication, the requested command could still execute regardless of authentication status.

OPW Fuel Management Systems SiteSentinel could allow an attacker to bypass authentication to the server and obtain full admin privileges.

An issue was discovered in Veritas NetBackup Flex Scale through 3.0 and Access Appliance through 8.0.100. Unauthenticated remote command execution can occur via the management portal.

The WooCommerce Photo Reviews Premium plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 1.3.13.2. This is due to the plugin not properly validating what user transient is being used in the login() function and not properly verifying the user's identity. This makes it possible for unauthenticated attackers to log in as user that has dismissed an admin notice in the past 30 days, which is often an administrator. Alternatively, a user can log in as any user with any transient that has a valid user_id as the value, though it would be more difficult to exploit this successfully.

The Jupiter X Core plugin for WordPress is vulnerable to authentication bypass in all versions up to, and including, 4.7.5. This is due to improper authentication via the Social Login widget. This makes it possible for unauthenticated attackers to log in as the first user to have logged in with a social media account, including administrator accounts. Attackers can exploit the vulnerability even if the Social Login element has been disabled, as long as it was previously enabled and used. The vulnerability was partially patched in version 4.7.5, and fully patched in version 4.7.8.

Certain switch models from PLANET Technology lack proper access control in firmware upload and download functionality, allowing unauthenticated remote attackers to download and upload firmware and system configurations, ultimately gaining full control of the devices.

Password recovery vulnerability in SICK SIM2000ST Partnumber 2086502 with firmware version <1.13.4 allows an unprivileged remote attacker to gain access to the userlevel defined as RecoverableUserLevel by invocating the password recovery mechanism method. This leads to an increase in their privileges on the system and thereby affecting the confidentiality integrity and availability of the system. An attacker can expect repeatable success by exploiting the vulnerability. The recommended solution is to update the firmware to a version >= 1.13.4 as soon as possible (available in SICK Support Portal).

Positron Broadcast Signal Processor TRA7005 v1.20 is vulnerable to an authentication bypass exploit that could allow an attacker to have unauthorized access to protected areas of the application.

Improper Authentication, Missing Authentication for Critical Function, Improper Authorization vulnerability in Profelis Informatics and Consulting PassBox allows Authentication Abuse.This issue affects PassBox: before v1.2.

In the default configuration of Apache SOAP, an RPCRouterServlet is available without authentication. This gives an attacker the possibility to invoke methods on the classpath that meet certain criteria. Depending on what classes are available on the classpath this might even lead to arbitrary remote code execution. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Missing authentication for a critical function in Palo Alto Networks Expedition can lead to an Expedition admin account takeover for attackers with network access to Expedition. Note: Expedition is a tool aiding in configuration migration, tuning, and enrichment. Configuration secrets, credentials, and other data imported into Expedition is at risk due to this issue.

A vulnerability has been identified in SiNVR/SiVMS Video Server (All versions < V5.0.0). The HTTP service (default port 5401/tcp) of the SiVMS/SiNVR Video Server contains an authentication bypass vulnerability, even when properly configured with enforced authentication. A remote attacker with network access to the Video Server could exploit this vulnerability to read the SiVMS/SiNVR users database, including the passwords of all users in obfuscated cleartext.

An issue in Quectel BC95-CNV V100R001C00SPC051 allows attackers to bypass authentication via a crafted NAS message.

The configuration backend allows an unauthenticated user to write arbitrary data with root privileges to the storage, which could lead to unauthenticated remote code execution and full system compromise.

The configuration backend of the web-based management can be used by unauthenticated users, although only authenticated users should be able to use the API. The vulnerability allows an unauthenticated attacker to read and set several device parameters that can lead to full compromise of the device.

Telepad allows remote unauthenticated users to send instructions to the server to execute arbitrary code without any previous authorization or authentication. CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

eQ-3 Homematic CCU2 2.47.20 and CCU3 3.47.18 with the Script Parser AddOn through 1.8 installed allow Remote Code Execution by unauthenticated attackers with access to the web interface via the exec.cgi script, which executes TCL script content from an HTTP POST request.

The default configuration of Lazy Mouse does not require a password, allowing remote unauthenticated users to execute arbitrary code with no prior authorization or authentication. CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

PC Keyboard allows remote unauthenticated users to send instructions to the server to execute arbitrary code without any previous authorization or authentication. CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

xlockmore 5.13 allows potential xlock bypass when FVWM switches to the same virtual desktop as a new Gaim window.

authentik is an open-source identity provider. Versions prior to 2022.11.2 and 2022.10.2 are vulnerable to unauthorized user creation and potential account takeover. With the default flows, unauthenticated users can create new accounts in authentik. If a flow exists that allows for email-verified password recovery, this can be used to overwrite the email address of admin accounts and take over their accounts. authentik 2022.11.2 and 2022.10.2 fix this issue. As a workaround, a policy can be created and bound to the `default-user-settings-flow flow` with the contents `return request.user.is_authenticated`.

Authentication Bypass Using an Alternate Path or Channel vulnerability in Realty Workstation allows Authentication Bypass.This issue affects Realty Workstation: from n/a through 1.0.45.

Authentication Bypass Using an Alternate Path or Channel vulnerability in MaanTheme MaanStore API allows Authentication Bypass.This issue affects MaanStore API: from n/a through 1.0.1.

Authentication Bypass Using an Alternate Path or Channel vulnerability in Vivek Tamrakar WP REST API FNS allows Authentication Bypass.This issue affects WP REST API FNS: from n/a through 1.0.0.

KubeView through 0.1.31 allows attackers to obtain control of a Kubernetes cluster because api/scrape/kube-system does not require authentication, and retrieves certificate files that can be used for authentication as kube-admin. NOTE: the vendor's position is that KubeView was a "fun side project and a learning exercise," and not "very secure."

A missing authentication for critical function in FortiManager 7.6.0, FortiManager 7.4.0 through 7.4.4, FortiManager 7.2.0 through 7.2.7, FortiManager 7.0.0 through 7.0.12, FortiManager 6.4.0 through 6.4.14, FortiManager 6.2.0 through 6.2.12, Fortinet FortiManager Cloud 7.4.1 through 7.4.4, FortiManager Cloud 7.2.1 through 7.2.7, FortiManager Cloud 7.0.1 through 7.0.12, FortiManager Cloud 6.4.1 through 6.4.7 allows attacker to execute arbitrary code or commands via specially crafted requests.

An issue discovered in Shenzhen Zhiboton Electronics ZBT WE1626 Router v 21.06.18 allows attackers to escalate privileges via WGET command to the Network Diagnosis endpoint.

A vulnerability has been identified in InterMesh 7177 Hybrid 2.0 Subscriber (All versions < V8.2.12), InterMesh 7707 Fire Subscriber (All versions < V7.2.12 only if the IP interface is enabled (which is not the default configuration)). The web server of affected devices does not authenticate GET requests that execute specific commands (such as `ping`) on operating system level.

An issue was discovered in FC46-WebBridge on GE Grid Solutions MS3000 devices before 3.7.6.25p0_3.2.2.17p0_4.7p0. Direct access to the API is possible on TCP port 8888 via programs located in the cgi-bin folder without any authentication.

An issue was discovered in BACKCLICK Professional 5.9.63. Due to exposed CORBA management services, arbitrary system commands can be executed on the server.

Sourcecodester Online Medicine Ordering System 1.0 is vulnerable to Incorrect Access Control. There is a lack of authorization checks for admin operations. Specifically, an attacker can perform admin-level actions without possessing a valid session token. The application does not verify whether the user is logged in as an admin or even check for a session token at all.