Cisco Wireless LAN Controller (WLC) devices with software 7.5(102.0) and 7.6(1.62) allow remote attackers to cause a denial of service (device crash) by triggering an exception during attempted forwarding of unspecified IPv6 packets to a non-IPv6 device, aka Bug ID CSCuj01046.

The wireless web-authentication subsystem on Cisco Wireless LAN Controller (WLC) devices 7.5.x and 7.6.x before 7.6.120 allows remote attackers to cause a denial of service (process crash and device restart) via a crafted value, aka Bug ID CSCum03269.

The DHCP implementation in Cisco IOS on Aironet access points does not properly handle error conditions with short leases and unsuccessful lease-renewal attempts, which allows remote attackers to cause a denial of service (device restart) by triggering a transition into a recovery state that was intended to involve a network-interface restart but actually involves a full device restart, aka Bug ID CSCtn16281.

The packet driver in Cisco IOS allows remote attackers to cause a denial of service (device reload) via a series of (1) Virtual Switching Systems (VSS) or (2) Bidirectional Forwarding Detection (BFD) packets, aka Bug IDs CSCug41049 and CSCue61890.

The Ethernet frame-forwarding implementation in Cisco NX-OS on Nexus 7000 devices allows remote attackers to cause a denial of service (forwarding loop and service outage) via a crafted frame, aka Bug ID CSCug47098.

A vulnerability in the Cisco Discovery Protocol (CDP) module of Cisco IOS XE Software Releases 16.6.1 and 16.6.2 could allow an unauthenticated, adjacent attacker to cause a memory leak that may lead to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain CDP packets. An attacker could exploit this vulnerability by sending certain CDP packets to an affected device. A successful exploit could cause an affected device to continuously consume memory and eventually result in a memory allocation failure that leads to a crash, triggering a reload of the affected device.

A vulnerability in the UDP broadcast forwarding function of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of UDP broadcast packets that are forwarded to an IPv4 helper address. An attacker could exploit this vulnerability by sending multiple UDP broadcast packets to the affected device. An exploit could allow the attacker to cause a buffer leak on the affected device, eventually resulting in a DoS condition requiring manual intervention to recover. This vulnerability affects all Cisco IOS XR platforms running 6.3.1, 6.2.3, or earlier releases of Cisco IOS XR Software when at least one IPv4 helper address is configured on an interface of the device. Cisco Bug IDs: CSCvi35625.

A vulnerability in the Internet Group Management Protocol (IGMP) packet-processing functionality of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust buffers on an affected device, resulting in a denial of service (DoS) condition, aka a Memory Leak. The vulnerability is due to the affected software insufficiently processing IGMP Membership Query packets that are sent to an affected device. An attacker could exploit this vulnerability by sending a large number of IGMP Membership Query packets, which contain certain values, to an affected device. A successful exploit could allow the attacker to exhaust buffers on the affected device, resulting in a DoS condition that requires the device to be reloaded manually. This vulnerability affects: Cisco Catalyst 4500 Switches with Supervisor Engine 8-E, if they are running Cisco IOS XE Software Release 3.x.x.E and IP multicast routing is configured; Cisco devices that are running Cisco IOS XE Software Release 16.x, if IP multicast routing is configured. Cisco Bug IDs: CSCuw09295, CSCve94496.

A vulnerability in the Pong tool of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software attempts to free the same area of memory twice. An attacker could exploit this vulnerability by sending a pong request to an affected device from a location on the network that causes the pong reply packet to egress both a FabricPath port and a non-FabricPath port. An exploit could allow the attacker to cause a dual or quad supervisor virtual port-channel (vPC) to reload. This vulnerability affects the following products when running Cisco NX-OS Software Release 7.2(1)D(1), 7.2(2)D1(1), or 7.2(2)D1(2) with both the Pong and FabricPath features enabled and the FabricPath port is actively monitored via a SPAN session: Cisco Nexus 7000 Series Switches and Cisco Nexus 7700 Series Switches. Cisco Bug IDs: CSCuv98660.

A vulnerability in the Cisco Discovery Protocol of Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect processing of certain Cisco Discovery Protocol packets. An attacker could exploit this vulnerability by sending certain Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DOS condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the Autonomic Networking feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause autonomic nodes of an affected system to reload, resulting in a denial of service (DoS) condition. More Information: CSCvd88936. Known Affected Releases: Denali-16.2.1 Denali-16.3.1.

A vulnerability in the IP Address Resolution Protocol (ARP) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers with a 20-Gbps Embedded Services Processor (ESP) installed could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service condition. The vulnerability is due to insufficient error handling when an affected device has reached platform limitations. An attacker could exploit this vulnerability by sending a malicious series of IP ARP messages to an affected device. A successful exploit could allow the attacker to exhaust system resources, which would eventually cause the affected device to reload.

The Network Processing Unit (NPU) in the Cisco Wireless LAN Controller (WLC) before 3.2.193.5, 4.0.x before 4.0.206.0, and 4.1.x allows remote attackers on a local wireless network to cause a denial of service (loss of packet forwarding) via (1) crafted SNAP packets, (2) malformed 802.11 traffic, or (3) packets with certain header length values, aka Bug ID CSCsg36361.

The Network Processing Unit (NPU) in the Cisco Wireless LAN Controller (WLC) before 3.2.171.5, 4.0.x before 4.0.206.0, and 4.1.x allows remote attackers on a local wireless network to cause a denial of service (loss of packet forwarding) via (1) crafted SNAP packets, (2) malformed 802.11 traffic, or (3) packets with certain header length values, aka Bug IDs CSCsg15901 and CSCsh10841.

The HTTP Profiler on the Cisco Aironet Access Point with software 15.2 and earlier does not properly manage buffers, which allows remote attackers to cause a denial of service (device reload) via crafted HTTP requests, aka Bug ID CSCuc62460.

Unspecified vulnerability in Cisco IOS 12.2SXA, SXB, SXD, and SXF; and the MSFC2, MSFC2a and MSFC3 running in Hybrid Mode on Cisco Catalyst 6000, 6500 and Cisco 7600 series systems; allows remote attackers on a local network segment to cause a denial of service (software reload) via a certain MPLS packet.

A vulnerability in the Cisco Discovery Protocol of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, adjacent attacker to cause a kernel panic on an affected system, resulting in a denial of service (DoS) condition. This vulnerability is due to incorrect processing of certain Cisco Discovery Protocol packets. An attacker could exploit this vulnerability by continuously sending certain Cisco Discovery Protocol packets to an affected device. A successful exploit could allow the attacker to cause a kernel panic on the system that is running the affected software, resulting in a DoS condition.

A vulnerability in the Ethernet packet handling of Cisco Aironet Access Points (APs) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by connecting as a wired client to the Ethernet interface of an affected device and sending a series of specific packets within a short time frame. A successful exploit could allow the attacker to cause a NULL pointer access that results in a reload of the affected device.

A vulnerability in the Cisco Discovery Protocol service of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause the service to restart, resulting in a denial of service (DoS) condition. This vulnerability is due to improper handling of Cisco Discovery Protocol messages that are processed by the Cisco Discovery Protocol service. An attacker could exploit this vulnerability by sending a series of malicious Cisco Discovery Protocol messages to an affected device. A successful exploit could allow the attacker to cause the Cisco Discovery Protocol service to fail and restart. In rare conditions, repeated failures of the process could occur, which could cause the entire device to restart.

Cisco Adaptive Security Appliance (ASA) Software 9.3(2) allows remote attackers to cause a denial of service (system reload) by sending crafted OSPFv2 packets on the local network, aka Bug ID CSCut52679.

Buffer overflow in Cisco NX-OS on Nexus 1000V devices for VMware vSphere 7.3(0)ZN(0.81), Nexus 3000 devices 7.3(0)ZN(0.81), Nexus 4000 devices 4.1(2)E1(1c), Nexus 7000 devices 7.2(0)N1(0.1), and Nexus 9000 devices 7.3(0)ZN(0.81) allows remote attackers to cause a denial of service (IGMP process restart) via a malformed IGMPv3 packet that is mishandled during memory allocation, aka Bug IDs CSCuv69713, CSCuv69717, CSCuv69723, CSCuv69732, and CSCuv48908.

Cisco Adaptive Security Appliance (ASA) Software 9.3(2.243) and 100.13(0.21) allows remote attackers to cause a denial of service (device reload) by sending crafted OSPFv2 packets on the local network, aka Bug ID CSCus84220.

Cisco IOS 15.4S, 15.4SN, and 15.5S and IOS XE 3.13S and 3.14S allow remote attackers to cause a denial of service (device crash) by including an IA_NA option in a DHCPv6 Solicit message on the local network, aka Bug ID CSCur29956.

The ISDN implementation in Cisco IOS 15.3S allows remote attackers to cause a denial of service (device reload) via malformed Q931 SETUP messages, aka Bug ID CSCut37890.

The Overlay Transport Virtualization (OTV) implementation in Cisco IOS XE 3.10S allows remote attackers to cause a denial of service (device reload) via a series of packets that are considered oversized and trigger improper fragmentation handling, aka Bug IDs CSCup37676 and CSCup30335.

A vulnerability in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause an affected IP camera to reload. This vulnerability is due to missing checks when processing Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected IP camera. A successful exploit could allow the attacker to cause the affected IP camera to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Multiple vulnerabilities in the implementation of the Cisco Discovery Protocol and Link Layer Discovery Protocol (LLDP) for Cisco Video Surveillance 7000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause a memory leak, which could lead to a denial of service (DoS) condition on an affected device. These vulnerabilities are due to incorrect processing of certain Cisco Discovery Protocol and LLDP packets at ingress time. An attacker could exploit these vulnerabilities by sending crafted Cisco Discovery Protocol or LLDP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to continuously consume memory, which could cause the device to crash and reload, resulting in a DoS condition. Note: Cisco Discovery Protocol and LLDP are Layer 2 protocols. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business RV Series Routers. An unauthenticated, adjacent attacker could execute arbitrary code or cause an affected router to leak system memory or reload. A memory leak or device reload would cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the deep packet inspection (DPI) engine of Cisco SD-WAN vEdge Routers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient handling of malformed packets. An attacker could exploit this vulnerability by sending crafted packets through an affected device. A successful exploit could allow the attacker to cause the device to reboot, resulting in a DoS condition.

The OSPF functionality in Cisco IOS and IOS XE allows remote attackers to cause a denial of service (device reload) via crafted options in an LSA type 11 packet, aka Bug ID CSCui21030.

The NTP implementation in Cisco IOS 12.0 through 12.4 and 15.0 through 15.1, and IOS XE 2.1 through 3.3, does not properly handle encapsulation of multicast NTP packets within MSDP SA messages, which allows remote attackers to cause a denial of service (device reload) by leveraging an MSDP peer relationship, aka Bug ID CSCuc81226.

The PPTP-ALG component in CRS Carrier Grade Services Engine (CGSE) and ASR 9000 Integrated Service Module (ISM) in Cisco IOS XR allows remote attackers to cause a denial of service (module reset) via crafted packet streams, aka Bug ID CSCue91963.

Cisco IOS XE 3.4 before 3.4.2S and 3.5 before 3.5.1S on 1000 ASR devices allows remote attackers to cause a denial of service (device reload) via malformed ICMP error packets associated with a (1) TCP or (2) UDP session that is under inspection by the Zone-Based Firewall (ZBFW) component, aka Bug ID CSCtt26470.

The T1/E1 driver-queue functionality in Cisco IOS 12.2 and 15.0 through 15.3, when an HDLC32 driver is used, allows remote attackers to cause a denial of service (interface queue wedge) via bursty network traffic, aka Bug ID CSCub67465.

The DNS-over-TCP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 DNS TCP stream, aka Bug ID CSCuf28733.

The PPTP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via crafted TCP port-1723 packets, aka Bug ID CSCtq14817.

Buffer overflow in the web-application interface on Cisco 9900 IP phones allows remote attackers to cause a denial of service (webapp interface outage) via long values in unspecified fields, aka Bug ID CSCuh10343.

Open Network Environment Platform (ONEP) in Cisco NX-OS allows remote authenticated users to cause a denial of service (network-element reload) via a crafted packet, aka Bug ID CSCui51551.

Apache Log4j2 versions 2.0-beta7 through 2.17.0 (excluding security fix releases 2.3.2 and 2.12.4) are vulnerable to a remote code execution (RCE) attack when a configuration uses a JDBC Appender with a JNDI LDAP data source URI when an attacker has control of the target LDAP server. This issue is fixed by limiting JNDI data source names to the java protocol in Log4j2 versions 2.17.1, 2.12.4, and 2.3.2.

A vulnerability in the batch provisioning feature in Cisco Prime Collaboration Provisioning Tool could allow an authenticated, remote attacker to overwrite system files as root. The vulnerability is due to lack of input validation of the parameters in BatchFileName and Directory. An attacker could exploit this vulnerability by manipulating the parameters of the batch action file function. Cisco Bug IDs: CSCvd61766.

A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235.

A vulnerability in the Internet Key Exchange Version 1 (IKEv1) XAUTH code of Cisco ASA Software could allow an authenticated, remote attacker to cause a reload of an affected system. The vulnerability is due to insufficient validation of the IKEv1 XAUTH parameters passed during an IKEv1 negotiation. An attacker could exploit this vulnerability by sending crafted parameters. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability only affects systems configured in routed firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid IKEv1 Phase 1 needs to be established to exploit this vulnerability, which means that an attacker would need to have knowledge of a pre-shared key or have a valid certificate for phase 1 authentication. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.7) 9.2(4.11) 9.4(4) 9.5(3) 9.6(1.5). Cisco Bug IDs: CSCuz11685.

A vulnerability in the Telnet CLI command of Cisco NX-OS System Software 7.1 through 7.3 running on Cisco Nexus Series Switches could allow an authenticated, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting crafted command arguments into the Telnet CLI command. An exploit could allow the attacker to read or write arbitrary files at the user's privilege level outside of the user's path. Cisco Bug IDs: CSCvb86771.