A race condition flaw was found in the Linux kernel sound subsystem due to improper locking. It could lead to a NULL pointer dereference while handling the SNDCTL_DSP_SYNC ioctl. A privileged local user (root or member of the audio group) could use this flaw to crash the system, resulting in a denial of service condition

A race condition accessing file object in the Linux kernel OverlayFS subsystem was found in the way users do rename in specific way with OverlayFS. A local user could use this flaw to crash the system.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: switchdev: Skip MDB replays of deferred events on offload Before this change, generation of the list of MDB events to replay would race against the creation of new group memberships, either from the IGMP/MLD snooping logic or from user configuration. While new memberships are immediately visible to walkers of br->mdb_list, the notification of their existence to switchdev event subscribers is deferred until a later point in time. So if a replay list was generated during a time that overlapped with such a window, it would also contain a replay of the not-yet-delivered event. The driver would thus receive two copies of what the bridge internally considered to be one single event. On destruction of the bridge, only a single membership deletion event was therefore sent. As a consequence of this, drivers which reference count memberships (at least DSA), would be left with orphan groups in their hardware database when the bridge was destroyed. This is only an issue when replaying additions. While deletion events may still be pending on the deferred queue, they will already have been removed from br->mdb_list, so no duplicates can be generated in that scenario. To a user this meant that old group memberships, from a bridge in which a port was previously attached, could be reanimated (in hardware) when the port joined a new bridge, without the new bridge's knowledge. For example, on an mv88e6xxx system, create a snooping bridge and immediately add a port to it: root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \ > ip link set dev x3 up master br0 And then destroy the bridge: root@infix-06-0b-00:~$ ip link del dev br0 root@infix-06-0b-00:~$ mvls atu ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a DEV:0 Marvell 88E6393X 33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . . 33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . . ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a root@infix-06-0b-00:~$ The two IPv6 groups remain in the hardware database because the port (x3) is notified of the host's membership twice: once via the original event and once via a replay. Since only a single delete notification is sent, the count remains at 1 when the bridge is destroyed. Then add the same port (or another port belonging to the same hardware domain) to a new bridge, this time with snooping disabled: root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \ > ip link set dev x3 up master br1 All multicast, including the two IPv6 groups from br0, should now be flooded, according to the policy of br1. But instead the old memberships are still active in the hardware database, causing the switch to only forward traffic to those groups towards the CPU (port 0). Eliminate the race in two steps: 1. Grab the write-side lock of the MDB while generating the replay list. This prevents new memberships from showing up while we are generating the replay list. But it leaves the scenario in which a deferred event was already generated, but not delivered, before we grabbed the lock. Therefore: 2. Make sure that no deferred version of a replay event is already enqueued to the switchdev deferred queue, before adding it to the replay list, when replaying additions.

The netfilter subsystem in the Linux kernel through 4.15.7 mishandles the case of a rule blob that contains a jump but lacks a user-defined chain, which allows local users to cause a denial of service (NULL pointer dereference) by leveraging the CAP_NET_RAW or CAP_NET_ADMIN capability, related to arpt_do_table in net/ipv4/netfilter/arp_tables.c, ipt_do_table in net/ipv4/netfilter/ip_tables.c, and ip6t_do_table in net/ipv6/netfilter/ip6_tables.c.

The rds_iw_laddr_check function in net/rds/iw.c in the Linux kernel through 3.14 allows local users to cause a denial of service (NULL pointer dereference and system crash) or possibly have unspecified other impact via a bind system call for an RDS socket on a system that lacks RDS transports.

In the Linux kernel, the following vulnerability has been resolved: l2tp: close all race conditions in l2tp_tunnel_register() The code in l2tp_tunnel_register() is racy in several ways: 1. It modifies the tunnel socket _after_ publishing it. 2. It calls setup_udp_tunnel_sock() on an existing socket without locking. 3. It changes sock lock class on fly, which triggers many syzbot reports. This patch amends all of them by moving socket initialization code before publishing and under sock lock. As suggested by Jakub, the l2tp lockdep class is not necessary as we can just switch to bh_lock_sock_nested().

In the Linux kernel, the following vulnerability has been resolved: phy: lynx-28g: serialize concurrent phy_set_mode_ext() calls to shared registers The protocol converter configuration registers PCC8, PCCC, PCCD (implemented by the driver), as well as others, control protocol converters from multiple lanes (each represented as a different struct phy). So, if there are simultaneous calls to phy_set_mode_ext() to lanes sharing the same PCC register (either for the "old" or for the "new" protocol), corruption of the values programmed to hardware is possible, because lynx_28g_rmw() has no locking. Add a spinlock in the struct lynx_28g_priv shared by all lanes, and take the global spinlock from the phy_ops :: set_mode() implementation. There are no other callers which modify PCC registers.

In the Linux kernel, the following vulnerability has been resolved: x86/sgx: Resolves SECS reclaim vs. page fault for EAUG race The SGX EPC reclaimer (ksgxd) may reclaim the SECS EPC page for an enclave and set secs.epc_page to NULL. The SECS page is used for EAUG and ELDU in the SGX page fault handler. However, the NULL check for secs.epc_page is only done for ELDU, not EAUG before being used. Fix this by doing the same NULL check and reloading of the SECS page as needed for both EAUG and ELDU. The SECS page holds global enclave metadata. It can only be reclaimed when there are no other enclave pages remaining. At that point, virtually nothing can be done with the enclave until the SECS page is paged back in. An enclave can not run nor generate page faults without a resident SECS page. But it is still possible for a #PF for a non-SECS page to race with paging out the SECS page: when the last resident non-SECS page A triggers a #PF in a non-resident page B, and then page A and the SECS both are paged out before the #PF on B is handled. Hitting this bug requires that race triggered with a #PF for EAUG. Following is a trace when it happens. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:sgx_encl_eaug_page+0xc7/0x210 Call Trace: ? __kmem_cache_alloc_node+0x16a/0x440 ? xa_load+0x6e/0xa0 sgx_vma_fault+0x119/0x230 __do_fault+0x36/0x140 do_fault+0x12f/0x400 __handle_mm_fault+0x728/0x1110 handle_mm_fault+0x105/0x310 do_user_addr_fault+0x1ee/0x750 ? __this_cpu_preempt_check+0x13/0x20 exc_page_fault+0x76/0x180 asm_exc_page_fault+0x27/0x30

In the Linux kernel, the following vulnerability has been resolved: spi: Fix null dereference on suspend A race condition exists where a synchronous (noqueue) transfer can be active during a system suspend. This can cause a null pointer dereference exception to occur when the system resumes. Example order of events leading to the exception: 1. spi_sync() calls __spi_transfer_message_noqueue() which sets ctlr->cur_msg 2. Spi transfer begins via spi_transfer_one_message() 3. System is suspended interrupting the transfer context 4. System is resumed 6. spi_controller_resume() calls spi_start_queue() which resets cur_msg to NULL 7. Spi transfer context resumes and spi_finalize_current_message() is called which dereferences cur_msg (which is now NULL) Wait for synchronous transfers to complete before suspending by acquiring the bus mutex and setting/checking a suspend flag.

A use-after-free flaw was found in the xorg-x11-server. An X server crash may occur in a very specific and legacy configuration (a multi-screen setup with multiple protocol screens, also known as Zaphod mode) if the pointer is warped from within a window on one screen to the root window of the other screen and if the original window is destroyed followed by another window being destroyed.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix handling of cached open files in nfsd4_open codepath Commit fb70bf124b05 ("NFSD: Instantiate a struct file when creating a regular NFSv4 file") added the ability to cache an open fd over a compound. There are a couple of problems with the way this currently works: It's racy, as a newly-created nfsd_file can end up with its PENDING bit cleared while the nf is hashed, and the nf_file pointer is still zeroed out. Other tasks can find it in this state and they expect to see a valid nf_file, and can oops if nf_file is NULL. Also, there is no guarantee that we'll end up creating a new nfsd_file if one is already in the hash. If an extant entry is in the hash with a valid nf_file, nfs4_get_vfs_file will clobber its nf_file pointer with the value of op_file and the old nf_file will leak. Fix both issues by making a new nfsd_file_acquirei_opened variant that takes an optional file pointer. If one is present when this is called, we'll take a new reference to it instead of trying to open the file. If the nfsd_file already has a valid nf_file, we'll just ignore the optional file and pass the nfsd_file back as-is. Also rework the tracepoints a bit to allow for an "opened" variant and don't try to avoid counting acquisitions in the case where we already have a cached open file.

NVIDIA Linux GPU Display Driver, all versions, contains a vulnerability in the UVM driver, in which a race condition may lead to a denial of service.

Array index error in arch/mips/kernel/scall64-o32.S in the Linux kernel before 2.6.28-rc8 on 64-bit MIPS platforms allows local users to cause a denial of service (system crash) via an o32 syscall with a small syscall number, which leads to an attempted read operation outside the bounds of the syscall table.

A flaw was found in pfn_swap_entry_to_page in memory management subsystem in the Linux Kernel. In this flaw, an attacker with a local user privilege may cause a denial of service problem due to a BUG statement referencing pmd_t x.

Xen 4.4.x and earlier, when using a large number of VCPUs, does not properly handle read and write locks, which allows local x86 guest users to cause a denial of service (write denial or NMI watchdog timeout and host crash) via a large number of read requests, a different vulnerability than CVE-2014-9065.

An issue was discovered in the Linux kernel through 6.5.9. During a race with SQ thread exit, an io_uring/fdinfo.c io_uring_show_fdinfo NULL pointer dereference can occur.

In the Linux kernel, the following vulnerability has been resolved: i2c: sprd: fix reference leak when pm_runtime_get_sync fails The PM reference count is not expected to be incremented on return in sprd_i2c_master_xfer() and sprd_i2c_remove(). However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced.

A NULL pointer dereference flaw was found in the Linux kernel’s Amateur Radio AX.25 protocol functionality in the way a user connects with the protocol. This flaw allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix kernel panic caused by race of smc_sock A crash occurs when smc_cdc_tx_handler() tries to access smc_sock but smc_release() has already freed it. [ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88 [ 4570.696048] #PF: supervisor write access in kernel mode [ 4570.696728] #PF: error_code(0x0002) - not-present page [ 4570.697401] PGD 0 P4D 0 [ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111 [ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0 [ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30 <...> [ 4570.711446] Call Trace: [ 4570.711746] <IRQ> [ 4570.711992] smc_cdc_tx_handler+0x41/0xc0 [ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560 [ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10 [ 4570.713489] tasklet_action_common.isra.17+0x66/0x140 [ 4570.714083] __do_softirq+0x123/0x2f4 [ 4570.714521] irq_exit_rcu+0xc4/0xf0 [ 4570.714934] common_interrupt+0xba/0xe0 Though smc_cdc_tx_handler() checked the existence of smc connection, smc_release() may have already dismissed and released the smc socket before smc_cdc_tx_handler() further visits it. smc_cdc_tx_handler() |smc_release() if (!conn) | | |smc_cdc_tx_dismiss_slots() | smc_cdc_tx_dismisser() | |sock_put(&smc->sk) <- last sock_put, | smc_sock freed bh_lock_sock(&smc->sk) (panic) | To make sure we won't receive any CDC messages after we free the smc_sock, add a refcount on the smc_connection for inflight CDC message(posted to the QP but haven't received related CQE), and don't release the smc_connection until all the inflight CDC messages haven been done, for both success or failed ones. Using refcount on CDC messages brings another problem: when the link is going to be destroyed, smcr_link_clear() will reset the QP, which then remove all the pending CQEs related to the QP in the CQ. To make sure all the CQEs will always come back so the refcount on the smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced by smc_ib_modify_qp_error(). And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we need to wait for all pending WQEs done, or we may encounter use-after- free when handling CQEs. For IB device removal routine, we need to wait for all the QPs on that device been destroyed before we can destroy CQs on the device, or the refcount on smc_connection won't reach 0 and smc_sock cannot be released.

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix cwnd update ordering After a reconnect, the reply handler is opening the cwnd (and thus enabling more RPC Calls to be sent) /before/ rpcrdma_post_recvs() can post enough Receive WRs to receive their replies. This causes an RNR and the new connection is lost immediately. The race is most clearly exposed when KASAN and disconnect injection are enabled. This slows down rpcrdma_rep_create() enough to allow the send side to post a bunch of RPC Calls before the Receive completion handler can invoke ib_post_recv().

In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: netjet: Fix crash in nj_probe: 'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100 ---truncated---

An issue was discovered in do_madvise in mm/madvise.c in the Linux kernel before 5.6.8. There is a race condition between coredump operations and the IORING_OP_MADVISE implementation, aka CID-bc0c4d1e176e.

An issue was discovered in the Linux kernel through 5.9.1, as used with Xen through 4.14.x. drivers/xen/events/events_base.c allows event-channel removal during the event-handling loop (a race condition). This can cause a use-after-free or NULL pointer dereference, as demonstrated by a dom0 crash via events for an in-reconfiguration paravirtualized device, aka CID-073d0552ead5.

In the Linux kernel, the following vulnerability has been resolved: udp: fix race between close() and udp_abort() Kaustubh reported and diagnosed a panic in udp_lib_lookup(). The root cause is udp_abort() racing with close(). Both racing functions acquire the socket lock, but udp{v6}_destroy_sock() release it before performing destructive actions. We can't easily extend the socket lock scope to avoid the race, instead use the SOCK_DEAD flag to prevent udp_abort from doing any action when the critical race happens. Diagnosed-and-tested-by: Kaustubh Pandey <kapandey@codeaurora.org>

In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix race condition of overwrite vs truncate pos_fsstress testcase complains a panic as belew: ------------[ cut here ]------------ kernel BUG at fs/f2fs/compress.c:1082! invalid opcode: 0000 [#1] SMP PTI CPU: 4 PID: 2753477 Comm: kworker/u16:2 Tainted: G OE 5.12.0-rc1-custom #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Workqueue: writeback wb_workfn (flush-252:16) RIP: 0010:prepare_compress_overwrite+0x4c0/0x760 [f2fs] Call Trace: f2fs_prepare_compress_overwrite+0x5f/0x80 [f2fs] f2fs_write_cache_pages+0x468/0x8a0 [f2fs] f2fs_write_data_pages+0x2a4/0x2f0 [f2fs] do_writepages+0x38/0xc0 __writeback_single_inode+0x44/0x2a0 writeback_sb_inodes+0x223/0x4d0 __writeback_inodes_wb+0x56/0xf0 wb_writeback+0x1dd/0x290 wb_workfn+0x309/0x500 process_one_work+0x220/0x3c0 worker_thread+0x53/0x420 kthread+0x12f/0x150 ret_from_fork+0x22/0x30 The root cause is truncate() may race with overwrite as below, so that one reference count left in page can not guarantee the page attaching in mapping tree all the time, after truncation, later find_lock_page() may return NULL pointer. - prepare_compress_overwrite - f2fs_pagecache_get_page - unlock_page - f2fs_setattr - truncate_setsize - truncate_inode_page - delete_from_page_cache - find_lock_page Fix this by avoiding referencing updated page.

Insufficient cleanup of passed-through device IRQs The management of IRQs associated with physical devices exposed to x86 HVM guests involves an iterative operation in particular when cleaning up after the guest's use of the device. In the case where an interrupt is not quiescent yet at the time this cleanup gets invoked, the cleanup attempt may be scheduled to be retried. When multiple interrupts are involved, this scheduling of a retry may get erroneously skipped. At the same time pointers may get cleared (resulting in a de-reference of NULL) and freed (resulting in a use-after-free), while other code would continue to assume them to be valid.

An issue was discovered in Xen through 4.14.x. There is a race condition when migrating timers between x86 HVM vCPUs. When migrating timers of x86 HVM guests between its vCPUs, the locking model used allows for a second vCPU of the same guest (also operating on the timers) to release a lock that it didn't acquire. The most likely effect of the issue is a hang or crash of the hypervisor, i.e., a Denial of Service (DoS). All versions of Xen are affected. Only x86 systems are vulnerable. Arm systems are not vulnerable. Only x86 HVM guests can leverage the vulnerability. x86 PV and PVH cannot leverage the vulnerability. Only guests with more than one vCPU can exploit the vulnerability.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between transaction aborts and fsyncs leading to use-after-free There is a race between a task aborting a transaction during a commit, a task doing an fsync and the transaction kthread, which leads to an use-after-free of the log root tree. When this happens, it results in a stack trace like the following: BTRFS info (device dm-0): forced readonly BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS: error (device dm-0) in cleanup_transaction:1958: errno=-5 IO failure BTRFS warning (device dm-0): lost page write due to IO error on /dev/mapper/error-test (-5) BTRFS warning (device dm-0): Skipping commit of aborted transaction. BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0xa4e8 len 4096 err no 10 BTRFS error (device dm-0): error writing primary super block to device 1 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e000 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e008 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e010 len 4096 err no 10 BTRFS: error (device dm-0) in write_all_supers:4110: errno=-5 IO failure (1 errors while writing supers) BTRFS: error (device dm-0) in btrfs_sync_log:3308: errno=-5 IO failure general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b68: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 2 PID: 2458471 Comm: fsstress Not tainted 5.12.0-rc5-btrfs-next-84 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x139/0xa40 Code: c0 74 19 (...) RSP: 0018:ffff9f18830d7b00 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b68 RBX: 0000000000000001 RCX: 0000000000000002 RDX: ffffffffb9c54d13 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff9f18830d7bc0 R08: 0000000000000000 R09: 0000000000000000 R10: ffff9f18830d7be0 R11: 0000000000000001 R12: ffff8c6cd199c040 R13: ffff8c6c95821358 R14: 00000000fffffffb R15: ffff8c6cbcf01358 FS: 00007fa9140c2b80(0000) GS:ffff8c6fac600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa913d52000 CR3: 000000013d2b4003 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? __btrfs_handle_fs_error+0xde/0x146 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] ? btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_log+0x7c1/0xf20 [btrfs] btrfs_sync_file+0x40c/0x580 [btrfs] do_fsync+0x38/0x70 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x33/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fa9142a55c3 Code: 8b 15 09 (...) RSP: 002b:00007fff26278d48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 0000563c83cb4560 RCX: 00007fa9142a55c3 RDX: 00007fff26278cb0 RSI: 00007fff26278cb0 RDI: 0000000000000005 RBP: 0000000000000005 R08: 0000000000000001 R09: 00007fff26278d5c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000340 R13: 00007fff26278de0 R14: 00007fff26278d96 R15: 0000563c83ca57c0 Modules linked in: btrfs dm_zero dm_snapshot dm_thin_pool (...) ---[ end trace ee2f1b19327d791d ]--- The steps that lead to this crash are the following: 1) We are at transaction N; 2) We have two tasks with a transaction handle attached to transaction N. Task A and Task B. Task B is doing an fsync; 3) Task B is at btrfs_sync_log(), and has saved fs_info->log_root_tree into a local variable named 'log_root_tree' at the top of btrfs_sync_log(). Task B is about to call write_all_supers(), but before that... 4) Task A calls btrfs_commit_transaction(), and after it sets the transaction state to TRANS_STATE_COMMIT_START, an error happens before it w ---truncated---

In the Linux kernel, the following vulnerability has been resolved: s390/qeth: fix deadlock during failing recovery Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed taking discipline_mutex inside qeth_do_reset(), fixing potential deadlocks. An error path was missed though, that still takes discipline_mutex and thus has the original deadlock potential. Intermittent deadlocks were seen when a qeth channel path is configured offline, causing a race between qeth_do_reset and ccwgroup_remove. Call qeth_set_offline() directly in the qeth_do_reset() error case and then a new variant of ccwgroup_set_offline(), without taking discipline_mutex.

In the Linux kernel, the following vulnerability has been resolved: dm: fix mempool NULL pointer race when completing IO dm_io_dec_pending() calls end_io_acct() first and will then dec md in-flight pending count. But if a task is swapping DM table at same time this can result in a crash due to mempool->elements being NULL: task1 task2 do_resume ->do_suspend ->dm_wait_for_completion bio_endio ->clone_endio ->dm_io_dec_pending ->end_io_acct ->wakeup task1 ->dm_swap_table ->__bind ->__bind_mempools ->bioset_exit ->mempool_exit ->free_io [ 67.330330] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ...... [ 67.330494] pstate: 80400085 (Nzcv daIf +PAN -UAO) [ 67.330510] pc : mempool_free+0x70/0xa0 [ 67.330515] lr : mempool_free+0x4c/0xa0 [ 67.330520] sp : ffffff8008013b20 [ 67.330524] x29: ffffff8008013b20 x28: 0000000000000004 [ 67.330530] x27: ffffffa8c2ff40a0 x26: 00000000ffff1cc8 [ 67.330535] x25: 0000000000000000 x24: ffffffdada34c800 [ 67.330541] x23: 0000000000000000 x22: ffffffdada34c800 [ 67.330547] x21: 00000000ffff1cc8 x20: ffffffd9a1304d80 [ 67.330552] x19: ffffffdada34c970 x18: 000000b312625d9c [ 67.330558] x17: 00000000002dcfbf x16: 00000000000006dd [ 67.330563] x15: 000000000093b41e x14: 0000000000000010 [ 67.330569] x13: 0000000000007f7a x12: 0000000034155555 [ 67.330574] x11: 0000000000000001 x10: 0000000000000001 [ 67.330579] x9 : 0000000000000000 x8 : 0000000000000000 [ 67.330585] x7 : 0000000000000000 x6 : ffffff80148b5c1a [ 67.330590] x5 : ffffff8008013ae0 x4 : 0000000000000001 [ 67.330596] x3 : ffffff80080139c8 x2 : ffffff801083bab8 [ 67.330601] x1 : 0000000000000000 x0 : ffffffdada34c970 [ 67.330609] Call trace: [ 67.330616] mempool_free+0x70/0xa0 [ 67.330627] bio_put+0xf8/0x110 [ 67.330638] dec_pending+0x13c/0x230 [ 67.330644] clone_endio+0x90/0x180 [ 67.330649] bio_endio+0x198/0x1b8 [ 67.330655] dec_pending+0x190/0x230 [ 67.330660] clone_endio+0x90/0x180 [ 67.330665] bio_endio+0x198/0x1b8 [ 67.330673] blk_update_request+0x214/0x428 [ 67.330683] scsi_end_request+0x2c/0x300 [ 67.330688] scsi_io_completion+0xa0/0x710 [ 67.330695] scsi_finish_command+0xd8/0x110 [ 67.330700] scsi_softirq_done+0x114/0x148 [ 67.330708] blk_done_softirq+0x74/0xd0 [ 67.330716] __do_softirq+0x18c/0x374 [ 67.330724] irq_exit+0xb4/0xb8 [ 67.330732] __handle_domain_irq+0x84/0xc0 [ 67.330737] gic_handle_irq+0x148/0x1b0 [ 67.330744] el1_irq+0xe8/0x190 [ 67.330753] lpm_cpuidle_enter+0x4f8/0x538 [ 67.330759] cpuidle_enter_state+0x1fc/0x398 [ 67.330764] cpuidle_enter+0x18/0x20 [ 67.330772] do_idle+0x1b4/0x290 [ 67.330778] cpu_startup_entry+0x20/0x28 [ 67.330786] secondary_start_kernel+0x160/0x170 Fix this by: 1) Establishing pointers to 'struct dm_io' members in dm_io_dec_pending() so that they may be passed into end_io_acct() _after_ free_io() is called. 2) Moving end_io_acct() after free_io().

The i915 driver in (1) drivers/char/drm/i915_dma.c in the Linux kernel 2.6.24 on Debian GNU/Linux and (2) sys/dev/pci/drm/i915_drv.c in OpenBSD does not restrict the DRM_I915_HWS_ADDR ioctl to the Direct Rendering Manager (DRM) master, which allows local users to cause a denial of service (memory corruption) via a crafted ioctl call, related to absence of the DRM_MASTER and DRM_ROOT_ONLY flags in the ioctl's configuration.

In the Linux kernel, the following vulnerability has been resolved: btrfs: use latest_dev in btrfs_show_devname The test case btrfs/238 reports the warning below: WARNING: CPU: 3 PID: 481 at fs/btrfs/super.c:2509 btrfs_show_devname+0x104/0x1e8 [btrfs] CPU: 2 PID: 1 Comm: systemd Tainted: G W O 5.14.0-rc1-custom #72 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: btrfs_show_devname+0x108/0x1b4 [btrfs] show_mountinfo+0x234/0x2c4 m_show+0x28/0x34 seq_read_iter+0x12c/0x3c4 vfs_read+0x29c/0x2c8 ksys_read+0x80/0xec __arm64_sys_read+0x28/0x34 invoke_syscall+0x50/0xf8 do_el0_svc+0x88/0x138 el0_svc+0x2c/0x8c el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x198/0x19c Reason: While btrfs_prepare_sprout() moves the fs_devices::devices into fs_devices::seed_list, the btrfs_show_devname() searches for the devices and found none, leading to the warning as in above. Fix: latest_dev is updated according to the changes to the device list. That means we could use the latest_dev->name to show the device name in /proc/self/mounts, the pointer will be always valid as it's assigned before the device is deleted from the list in remove or replace. The RCU protection is sufficient as the device structure is freed after synchronization.

An issue was discovered in Xen through 4.13.x, allowing x86 HVM guest OS users to cause a hypervisor crash. An inverted conditional in x86 HVM guests' dirty video RAM tracking code allows such guests to make Xen de-reference a pointer guaranteed to point at unmapped space. A malicious or buggy HVM guest may cause the hypervisor to crash, resulting in Denial of Service (DoS) affecting the entire host. Xen versions from 4.8 onwards are affected. Xen versions 4.7 and earlier are not affected. Only x86 systems are affected. Arm systems are not affected. Only x86 HVM guests using shadow paging can leverage the vulnerability. In addition, there needs to be an entity actively monitoring a guest's video frame buffer (typically for display purposes) in order for such a guest to be able to leverage the vulnerability. x86 PV guests, as well as x86 HVM guests using hardware assisted paging (HAP), cannot leverage the vulnerability.

The aac_send_raw_srb function in drivers/scsi/aacraid/commctrl.c in the Linux kernel through 3.12.1 does not properly validate a certain size value, which allows local users to cause a denial of service (invalid pointer dereference) or possibly have unspecified other impact via an FSACTL_SEND_RAW_SRB ioctl call that triggers a crafted SRB command.

The fib6_add function in net/ipv6/ip6_fib.c in the Linux kernel before 3.11.5 does not properly implement error-code encoding, which allows local users to cause a denial of service (NULL pointer dereference and system crash) by leveraging the CAP_NET_ADMIN capability for an IPv6 SIOCADDRT ioctl call.

The __udf_read_inode function in fs/udf/inode.c in the Linux kernel through 3.16.3 does not restrict the amount of ICB indirection, which allows physically proximate attackers to cause a denial of service (infinite loop or stack consumption) via a UDF filesystem with a crafted inode.

In the Linux kernel before 5.4.16, a race condition in tty->disc_data handling in the slip and slcan line discipline could lead to a use-after-free, aka CID-0ace17d56824. This affects drivers/net/slip/slip.c and drivers/net/can/slcan.c.

The ip6_append_data_mtu function in net/ipv6/ip6_output.c in the IPv6 implementation in the Linux kernel through 3.10.3 does not properly maintain information about whether the IPV6_MTU setsockopt option had been specified, which allows local users to cause a denial of service (BUG and system crash) via a crafted application that uses the UDP_CORK option in a setsockopt system call.

Buffer overflow in the exitcode_proc_write function in arch/um/kernel/exitcode.c in the Linux kernel before 3.12 allows local users to cause a denial of service or possibly have unspecified other impact by leveraging root privileges for a write operation.

Multiple buffer overflows in drivers/staging/wlags49_h2/wl_priv.c in the Linux kernel before 3.12 allow local users to cause a denial of service or possibly have unspecified other impact by leveraging the CAP_NET_ADMIN capability and providing a long station-name string, related to the (1) wvlan_uil_put_info and (2) wvlan_set_station_nickname functions.

The bridge multicast implementation in the Linux kernel through 3.10.3 does not check whether a certain timer is armed before modifying the timeout value of that timer, which allows local users to cause a denial of service (BUG and system crash) via vectors involving the shutdown of a KVM virtual machine, related to net/bridge/br_mdb.c and net/bridge/br_multicast.c.

Use-after-free vulnerability in the vhost_net_set_backend function in drivers/vhost/net.c in the Linux kernel through 3.10.3 allows local users to cause a denial of service (OOPS and system crash) via vectors involving powering on a virtual machine.

A flaw was found in the Linux kernel before 5.9-rc4. A failure of the file system metadata validator in XFS can cause an inode with a valid, user-creatable extended attribute to be flagged as corrupt. This can lead to the filesystem being shutdown, or otherwise rendered inaccessible until it is remounted, leading to a denial of service. The highest threat from this vulnerability is to system availability.

Memory leak in the unshare_userns function in kernel/user_namespace.c in the Linux kernel before 3.10.6 allows local users to cause a denial of service (memory consumption) via an invalid CLONE_NEWUSER unshare call.

The Intel VT-d Interrupt Remapping engine in Xen 3.3.x through 4.3.x allows local guests to cause a denial of service (kernel panic) via a malformed Message Signaled Interrupt (MSI) from a PCI device that is bus mastering capable that triggers a System Error Reporting (SERR) Non-Maskable Interrupt (NMI).

drivers/hid/hid-steelseries.c in the Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_HID_STEELSERIES is enabled, allows physically proximate attackers to cause a denial of service (heap-based out-of-bounds write) via a crafted device.

The Human Interface Device (HID) subsystem in the Linux kernel through 3.11, when CONFIG_LOGITECH_FF, CONFIG_LOGIG940_FF, or CONFIG_LOGIWHEELS_FF is enabled, allows physically proximate attackers to cause a denial of service (heap-based out-of-bounds write) via a crafted device, related to (1) drivers/hid/hid-lgff.c, (2) drivers/hid/hid-lg3ff.c, and (3) drivers/hid/hid-lg4ff.c.