IBM DB2 9.7, 10.1, 10.5, and 11.1 libdb2e.so.1 is vulnerable to a stack based buffer overflow, caused by improper bounds checking which could allow an attacker to execute arbitrary code. IBM X-Force ID: 153316.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a stack overflow via the function setDiagnosisCfg.

H3C B5 Mini B5MiniV100R005 was discovered to contain a stack overflow via the function SetMacAccessMode.

NVIDIA libnvomx contains a possible out of bounds write due to a improper input validation which could lead to local escalation of privilege. This issue is rated as high. Product: Android. Version: N/A. Android: A-66969318. Reference: N-CVE-2017-6281.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function SetMobileAPInfoById.

An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. The destination buffer sp+0x440 is overflowed with the call to sprintf() for any ip values that are greater than 1024-len(‘/etc/config-tools/config_interfaces interface=X1 state=enabled ip-address=‘) in length. A ip value of length 0x3da will cause the service to crash.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function AddWlanMacList.

An elevation of privilege vulnerability exists in Windows when the Win32k component fails to properly handle objects in memory, aka 'Win32k Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2019-1394, CVE-2019-1395, CVE-2019-1396, CVE-2019-1408, CVE-2019-1434.

An exploitable stack buffer overflow vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can cause a stack buffer overflow, resulting in code execution. An attacker can send a specially crafted packet to trigger the parsing of this cache file.

TOTOLINK A3700R V9.1.2u.6134_B20201202 was discovered to contain a stack overflow via the command parameter in the function setTracerouteCfg.

Memory corruption in system firmware for Intel(R) NUC may allow a privileged user to potentially enable escalation of privilege, denial of service and/or information disclosure via local access.

u'Lack of check that the TX FIFO write and read indices that are read from shared RAM are less than the FIFO size results into memory corruption and potential information leakage' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, Bitra, IPQ6018, IPQ8074, Kamorta, MDM9150, MDM9205, MDM9206, MDM9607, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996, MSM8996AU, MSM8998, Nicobar, QCA8081, QCM2150, QCN7605, QCS404, QCS405, QCS605, QCS610, QM215, Rennell, SA415M, SA515M, SA6155P, Saipan, SC7180, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function EnableIpv6.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function AddMacList.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function SetMacAccessMode.

TOTOLINK N350RT V9.3.5u.6139_B20201216 was discovered to contain a command injection vulnerability via the lang parameter in the function setLanguageCfg.

H3C B5 Mini B5MiniV100R005 was discovered to contain a stack overflow via the function EditMacList.d.

An out-of-bounds write vulnerability in the Linux kernel's net/sched: sch_qfq component can be exploited to achieve local privilege escalation. The qfq_change_agg() function in net/sched/sch_qfq.c allows an out-of-bounds write because lmax is updated according to packet sizes without bounds checks. We recommend upgrading past commit 3e337087c3b5805fe0b8a46ba622a962880b5d64.

An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can cause a stack buffer overflow, resulting in code execution. An attacker can send a specially crafted packet to trigger the parsing of this cache file. The destination buffer sp+0x440 is overflowed with the call to sprintf() for any subnetmask values that are greater than 1024-len(‘/etc/config-tools/config_interfaces interface=X1 state=enabled subnet-mask=‘) in length. A subnetmask value of length 0x3d9 will cause the service to crash.

Tenda AX1803 v1.0.0.1 was discovered to contain a stack overflow via the shareSpeed parameter in the function fromSetWifiGusetBasic.

In Android before the 2018-06-05 security patch level, NVIDIA Tegra X1 TZ contains a possible out of bounds write due to missing bounds check which could lead to escalation of privilege from the kernel to the TZ. User interaction is not needed for exploitation. This issue is rated as high. Version: N/A. Android: A-69316825. Reference: N-CVE-2017-6294.

A flaw was found in the QEMU disk image utility (qemu-img) 'info' command. A specially crafted image file containing a `json:{}` value describing block devices in QMP could cause the qemu-img process on the host to consume large amounts of memory or CPU time, leading to denial of service or read/write to an existing external file.

An issue was discovered in yurex_read in drivers/usb/misc/yurex.c in the Linux kernel before 4.17.7. Local attackers could use user access read/writes with incorrect bounds checking in the yurex USB driver to crash the kernel or potentially escalate privileges.

A heap-based overflow vulnerability in GetCorrectDbLanguageTypeEsPKc function in libSDKRecognitionText.spensdk.samsung.so library prior to SMR Sep-2022 Release 1 allows attacker to cause memory access fault.

In Android before the 2018-05-05 security patch level, NVIDIA Tegra X1 TZ contains a vulnerability in Widevine TA where the software writes data past the end, or before the beginning, of the intended buffer, which may lead to escalation of Privileges. This issue is rated as high. Android: A-69377364. Reference: N-CVE-2017-6293.

An OOB heap buffer r/w access issue was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process.

Stack-based buffer overflow in oninit in IBM Informix Dynamic Server Enterprise Edition 12.1 allows an authenticated user to execute predefined code with root privileges, such as escalating to a root shell. IBM X-Force ID: 144441.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix error recovery leading to data corruption on ESE devices Extent Space Efficient (ESE) or thin provisioned volumes need to be formatted on demand during usual IO processing. The dasd_ese_needs_format function checks for error codes that signal the non existence of a proper track format. The check for incorrect length is to imprecise since other error cases leading to transport of insufficient data also have this flag set. This might lead to data corruption in certain error cases for example during a storage server warmstart. Fix by removing the check for incorrect length and replacing by explicitly checking for invalid track format in transport mode. Also remove the check for file protected since this is not a valid ESE handling case.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function Edit_BasicSSID.

H3C B5 Mini B5MiniV100R005 was discovered to contain a stack overflow via the function AddWlanMacList.

VMware ESXi (ESXi 6.5 without patch ESXi650-201707101-SG), Workstation (12.x before 12.5.7) and Fusion (8.x before 8.5.8) contain an out-of-bounds write vulnerability in SVGA device. This issue may allow a guest to execute code on the host.

A vulnerability was found in Sricam IP CCTV Camera. It has been classified as critical. Affected is an unknown function of the component Device Viewer. The manipulation leads to memory corruption. Local access is required to approach this attack.

A heap-based overflow vulnerability in HWR::EngJudgeModel::Construct() in libSDKRecognitionText.spensdk.samsung.so library prior to SMR Sep-2022 Release 1 allows attacker to cause memory access fault.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function edditactionlist.

TOTOLINK A7000R V9.1.0u.6115_B20201022 was discovered to contain a stack overflow via the command parameter at setting/setTracerouteCfg.

Tenda AX1803 v1.0.0.1 was discovered to contain a stack overflow via the list parameter at the function formSetQosBand.

Memory corruption may occur when invoking IOCTL calls from userspace to the camera kernel driver to dump request information, due to a missing memory requirement check.

A heap-based overflow vulnerability in HWR::EngineCJK::Impl::Construct() in libSDKRecognitionText.spensdk.samsung.so library prior to SMR Sep-2022 Release 1 allows attacker to cause memory access fault.

H3C Magic NX18 Plus NX18PV100R003 was discovered to contain a stack overflow via the function DEleteusergroup.

netCDF in GDAL 2.4.2 through 3.0.4 has a stack-based buffer overflow in nc4_get_att (called from nc4_get_att_tc and nc_get_att_text) and in uffd_cleanup (called from netCDFDataset::~netCDFDataset and netCDFDataset::~netCDFDataset).

Palo Alto Networks Terminal Services Agent before 7.0.7 allows local users to gain privileges via vectors that trigger an out-of-bounds write operation.

A buffer overflow issue was discovered in the Yubico-Piv 1.5.0 smartcard driver. The file lib/ykpiv.c contains the following code in the function `ykpiv_transfer_data()`: {% highlight c %} if(*out_len + recv_len - 2 > max_out) { fprintf(stderr, "Output buffer to small, wanted to write %lu, max was %lu.", *out_len + recv_len - 2, max_out); } if(out_data) { memcpy(out_data, data, recv_len - 2); out_data += recv_len - 2; *out_len += recv_len - 2; } {% endhighlight %} -- it is clearly checked whether the buffer is big enough to hold the data copied using `memcpy()`, but no error handling happens to avoid the `memcpy()` in such cases. This code path can be triggered with malicious data coming from a smartcard.

Possibility of heap-buffer-overflow during last iteration of loop while populating image version information in diag command response packet, in Snapdragon Auto, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Wearables in APQ8053, APQ8096AU, APQ8098, MDM9607, MDM9640, MSM8909W, MSM8917, MSM8953, Nicobar, QCS605, QM215, Rennell, SA6155P, Saipan, SDA660, SDM429, SDM439, SDM450, SDM632, SDM670, SDM710, SDM845, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

kernel writes to user passed address without any checks can lead to arbitrary memory write in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Mobile, Snapdragon Wired Infrastructure and Networking in IPQ6018, IPQ8074, MSM8996, MSM8996AU, Nicobar, QCS605, Rennell, Saipan, SC7180, SC8180X, SDM670, SDM710, SDM845, SDM850, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix reg_set_min_max corruption of fake_reg Juan reported that after doing some changes to buzzer [0] and implementing a new fuzzing strategy guided by coverage, they noticed the following in one of the probes: [...] 13: (79) r6 = *(u64 *)(r0 +0) ; R0=map_value(ks=4,vs=8) R6_w=scalar() 14: (b7) r0 = 0 ; R0_w=0 15: (b4) w0 = -1 ; R0_w=0xffffffff 16: (74) w0 >>= 1 ; R0_w=0x7fffffff 17: (5c) w6 &= w0 ; R0_w=0x7fffffff R6_w=scalar(smin=smin32=0,smax=umax=umax32=0x7fffffff,var_off=(0x0; 0x7fffffff)) 18: (44) w6 |= 2 ; R6_w=scalar(smin=umin=smin32=umin32=2,smax=umax=umax32=0x7fffffff,var_off=(0x2; 0x7ffffffd)) 19: (56) if w6 != 0x7ffffffd goto pc+1 REG INVARIANTS VIOLATION (true_reg2): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg1): range bounds violation u64=[0x7fffffff, 0x7ffffffd] s64=[0x7fffffff, 0x7ffffffd] u32=[0x7fffffff, 0x7ffffffd] s32=[0x7fffffff, 0x7ffffffd] var_off=(0x7fffffff, 0x0) REG INVARIANTS VIOLATION (false_reg2): const tnum out of sync with range bounds u64=[0x0, 0xffffffffffffffff] s64=[0x8000000000000000, 0x7fffffffffffffff] u32=[0x0, 0xffffffff] s32=[0x80000000, 0x7fffffff] var_off=(0x7fffffff, 0x0) 19: R6_w=0x7fffffff 20: (95) exit from 19 to 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: R0=0x7fffffff R6=scalar(smin=umin=smin32=umin32=2,smax=umax=smax32=umax32=0x7ffffffe,var_off=(0x2; 0x7ffffffd)) R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 21: (14) w6 -= 2147483632 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=14,var_off=(0x2; 0xfffffffd)) 22: (76) if w6 s>= 0xe goto pc+1 ; R6_w=scalar(smin=umin=umin32=2,smax=umax=0xffffffff,smin32=0x80000012,smax32=13,var_off=(0x2; 0xfffffffd)) 23: (95) exit from 22 to 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: R0=0x7fffffff R6_w=14 R7=map_ptr(ks=4,vs=8) R9=ctx() R10=fp0 fp-24=map_ptr(ks=4,vs=8) fp-40=mmmmmmmm 24: (14) w6 -= 14 ; R6_w=0 [...] What can be seen here is a register invariant violation on line 19. After the binary-or in line 18, the verifier knows that bit 2 is set but knows nothing about the rest of the content which was loaded from a map value, meaning, range is [2,0x7fffffff] with var_off=(0x2; 0x7ffffffd). When in line 19 the verifier analyzes the branch, it splits the register states in reg_set_min_max() into the registers of the true branch (true_reg1, true_reg2) and the registers of the false branch (false_reg1, false_reg2). Since the test is w6 != 0x7ffffffd, the src_reg is a known constant. Internally, the verifier creates a "fake" register initialized as scalar to the value of 0x7ffffffd, and then passes it onto reg_set_min_max(). Now, for line 19, it is mathematically impossible to take the false branch of this program, yet the verifier analyzes it. It is impossible because the second bit of r6 will be set due to the prior or operation and the constant in the condition has that bit unset (hex(fd) == binary(1111 1101). When the verifier first analyzes the false / fall-through branch, it will compute an intersection between the var_off of r6 and of the constant. This is because the verifier creates a "fake" register initialized to the value of the constant. The intersection result later refines both registers in regs_refine_cond_op(): [...] t = tnum_intersect(tnum_subreg(reg1->var_off), tnum_subreg(reg2->var_off)); reg1->var_o ---truncated---

Memory corruption issues in Intel(R) PROSet/Wireless WiFi Software extension DLL before version 21.40 may allow an authenticated user to potentially enable escalation of privilege, information disclosure and a denial of service via local access.

Memory corruption while sound model registration for voice activation with audio kernel driver.

VMware vCenter Server Appliance (vCSA) (6.5 before 6.5 U1d) contains a local privilege escalation vulnerability via the 'showlog' plugin. Successful exploitation of this issue could result in a low privileged user gaining root level privileges over the appliance base OS.

A flaw was found in the HFS filesystem. When reading an HFS volume's name at grub_fs_mount(), the HFS filesystem driver performs a strcpy() using the user-provided volume name as input without properly validating the volume name's length. This issue may read to a heap-based out-of-bounds writer, impacting grub's sensitive data integrity and eventually leading to a secure boot protection bypass.

A vulnerability was found in Sricam IP CCTV Camera and classified as critical. This issue affects some unknown processing of the component Device Viewer. The manipulation leads to memory corruption. An attack has to be approached locally. The exploit has been disclosed to the public and may be used.