_account_forgot_password.ajax.php in MFScripts YetiShare 3.5.2 through 4.5.3 takes a different amount of time to return depending on whether an email address is configured for the account name provided. This can be used by an attacker to enumerate accounts by guessing email addresses.

MFScripts YetiShare 3.5.2 through 4.5.3 does not set the Secure flag on session cookies, allowing the cookie to be sent over cleartext channels.

_account_forgot_password.ajax.php in MFScripts YetiShare 3.5.2 through 4.5.3 displays a message indicating whether an email address is configured for the account name provided. This can be used by an attacker to enumerate accounts by guessing email addresses.

MFScripts YetiShare v3.5.2 through v4.5.4 places sensitive information in the Referer header. If this leaks, then third parties may discover password-reset hashes, file-delete links, or other sensitive information.

In Brocade SANnav, before Brocade SANnav v2.3.0, syslog traffic received clear text. This could allow an unauthenticated, remote attacker to capture sensitive information.

This vulnerability applies to the Micro Air Vehicle Link (MAVLink) protocol and allows a remote attacker to gain access to sensitive information provided it has access to the communication medium. MAVLink is a header-based protocol that does not perform encryption to improve transfer (and reception speed) and efficiency by design. The increasing popularity of the protocol (used accross different autopilots) has led to its use in wired and wireless mediums through insecure communication channels exposing sensitive information to a remote attacker with ability to intercept network traffic.

Technicolor TC7337NET 08.89.17.23.03 devices allow remote attackers to discover passwords by sniffing the network for an "Authorization: Basic" HTTP header.

A flaw was found in OpenStack. Multiple components show plain-text passwords in /var/log/messages during the OpenStack overcloud update run, leading to a disclosure of sensitive information problem.

pam_ldap and nss_ldap, when used with OpenLDAP and connecting to a slave using TLS, does not use TLS for the subsequent connection if the client is referred to a master, which may cause a password to be sent in cleartext and allows remote attackers to sniff the password.

An issue in Horizon Business Services Inc. Caterease 16.0.1.1663 through 24.0.1.2405 and possibly later versions, allows a remote attacker to perform a Sniffing Network Traffic attack due to the cleartext transmission of sensitive information.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. Sensitive information is sent to the web server in cleartext, which may allow an attacker to discover the credentials if they are able to observe traffic between the web browser and the server.

An issue was discovered on MOBOTIX S14 MX-V4.2.1.61 devices. The default management application is delivered over cleartext HTTP with Basic Authentication, as demonstrated by the /admin/index.html URI.

An issue in CloudExplorer Lite 1.3.1 allows an attacker to obtain sensitive information via the login key component.

Plain text credentials and session ID can be captured with a network sniffer.

SkyScrape is a GUI Dashboard for AWS Infrastructure and Managing Resources and Usage Costs. SkyScrape's API requests are currently unsecured HTTP requests, leading to potential vulnerabilities for the user's temporary credentials and data. This affects version 1.0.0.

Multiple LDAP injections vulnerabilities exist in SecurEnvoy MFA before 9.4.514 due to improper validation of user-supplied input. An unauthenticated remote attacker could exfiltrate data from Active Directory through blind LDAP injection attacks against the DESKTOP service exposed on the /secserver HTTP endpoint. This may include ms-Mcs-AdmPwd, which has a cleartext password for the Local Administrator Password Solution (LAPS) feature.

In the "NQ Contacts Backup & Restore" application 1.1 for Android, no HTTPS is used for transmitting login and synced user data. When logging in, the username is transmitted in cleartext along with an SHA-1 hash of the password. The attacker can either crack this hash or use it for further attacks where only the hash value is required.

A CWE-319: Cleartext Transmission of Sensitive Information vulnerability exists in Modicon M580, Modicon M340, Modicon Premium , Modicon Quantum (all firmware versions), which could cause the disclosure of information when transferring applications to the controller using Modbus TCP protocol.

The Vibease Wireless Remote Vibrator app for Android and the Vibease Chat app for iOS use cleartext to exchange messages with other apps and the PLAIN SASL mechanism to send auth tokens to Vibease servers, which allows remote attackers to obtain user credentials, messages, and other sensitive information by sniffing the network for XMPP traffic.

Mirasys Video Management System (VMS) 6.x before 6.4.6, 7.x before 7.5.15, and 8.x before 8.1.1 has a login process in which cleartext data is sent from a server to a client, and not all of this data is required for the client functionality.

In TARGIT Decision Suite 23.2.15007.0 before Autumn 2023, the session token is part of the URL and may be sent in a cleartext HTTP session.

A vulnerability was found in Intergard SGS 8.7.0. It has been declared as problematic. This vulnerability affects unknown code of the component SQL Query Handler. The manipulation leads to cleartext transmission of sensitive information. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-234448. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, SNMP exposes sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is inserted into various profile types and accessed using SNMPv2.

DTEN D5 before 1.3 and D7 before 1.3 devices transfer customer data files via unencrypted HTTP.

ONTAP Select Deploy administration utility versions 2.2 through 2.12.1 transmit credentials in plaintext.

Moxa IKS-G6824A series Versions 4.5 and prior, EDS-405A series Version 3.8 and prior, EDS-408A series Version 3.8 and prior, and EDS-510A series Version 3.8 and prior use plaintext transmission of sensitive data, which may allow an attacker to capture sensitive data such as an administrative password.

Oncommand Insight versions prior to 7.3.5 shipped without certain HTTP Security headers configured which could allow an attacker to obtain sensitive information via unspecified vectors.

The ksmbd server through 3.4.2, as used in the Linux kernel through 5.15.8, sometimes communicates in cleartext even though encryption has been enabled. This occurs because it sets the SMB2_GLOBAL_CAP_ENCRYPTION flag when using the SMB 3.1.1 protocol, which is a violation of the SMB protocol specification. When Windows 10 detects this protocol violation, it disables encryption.

OKI C5510MFP Printer CU H2.15, PU 01.03.01, System F/W 1.01, and Web Page 1.00 sends the configuration of the printer in cleartext, which allows remote attackers to obtain the administrative password by connecting to TCP port 5548 or 7777.

SaTECH BCU in its firmware version 2.1.3 uses the HTTP protocol. The use of the HTTP protocol for web browsing has the problem that information is exchanged in unencrypted text. Since sensitive data such as credentials are exchanged, an attacker could obtain them and log in legitimately.

OnCommand Workflow Automation versions prior to 5.0 shipped without certain HTTP Security headers configured which could allow an attacker to obtain sensitive information via unspecified vectors.

TOTOLINK X5000R v9.1.0u.6118_B20201102 was discovered to use the HTTP protocol for authentication into the admin interface, allowing attackers to intercept user credentials via packet capture software.

On BIG-IP 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, SNMP may expose sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is used with various profile types and is accessed using SNMPv2.

IBM Security Information Queue (ISIQ) 1.0.0, 1.0.1, and 1.0.2 is missing the HTTP Strict Transport Security header. Users can navigate by mistake to the unencrypted version of the web application or accept invalid certificates. This leads to sensitive data being sent unencrypted over the wire. IBM X-Force ID: 158661.

A cleartext transmission vulnerability exists in the network communication functionality of WAGO e!Cockpit version 1.5.1.1. An attacker with access to network traffic can easily intercept, interpret, and manipulate data coming from, or destined for e!Cockpit. This includes passwords, configurations, and binaries being transferred to endpoints.

ELOG 3.1.4-57bea22 and below is affected by an information disclosure vulnerability. A remote unauthenticated attacker can access the server's configuration file by sending an HTTP GET request. Amongst the configuration data, the attacker may gain access to valid admin usernames and, in older versions of ELOG, passwords.

A cleartext transmission of sensitive information vulnerability exists in the OAS Engine configuration communications functionality of Open Automation Software OAS Platform V16.00.0112. A targeted network sniffing attack can lead to a disclosure of sensitive information. An attacker can sniff network traffic to trigger this vulnerability.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 171826.

IBM API Connect 5.0.0.0 through 5.0.8.6 could allow an unauthorized user to obtain sensitive information about the system users using specially crafted HTTP requests. IBM X-Force ID: 162162.

IBM Sterling File Gateway 2.2.0.0 through 6.0.1.0 displays sensitive information in HTTP requests which could be used in further attacks against the system. IBM X-Force ID: 160503.

Datalust Seq.App.EmailPlus (aka seq-app-htmlemail) 3.1.0-dev-00148, 3.1.0-dev-00170, and 3.1.0-dev-00176 can use cleartext SMTP on port 25 in some cases where encryption on port 465 was intended.

Fresenius Kabi Agilia Link + version 3.0 does not enforce transport layer encryption. Therefore, transmitted data may be sent in cleartext. Transport layer encryption is offered on Port TCP/443, but the affected service does not perform an automated redirect from the unencrypted service on Port TCP/80 to the encrypted service.

ELOG 3.1.4-57bea22 and below is affected by an information disclosure vulnerability. A remote unauthenticated attacker can recover a user's password hash by sending a crafted HTTP POST request.

Pivotal Apps Manager Release, versions 665.0.x prior to 665.0.28, versions 666.0.x prior to 666.0.21, versions 667.0.x prior to 667.0.7, contain an invitation service that accepts HTTP. A remote unauthenticated user could listen to network traffic and gain access to the authorization credentials used to make the invitation requests.

A vulnerability was found in whohas. It has been rated as problematic. This issue affects some unknown processing of the component Package Information Handler. The manipulation leads to cleartext transmission of sensitive information. The attack may be initiated remotely. The real existence of this vulnerability is still doubted at the moment. The name of the patch is 667c3e2e9178f15c23d7918b5db25cd0792c8472. It is recommended to apply a patch to fix this issue. The associated identifier of this vulnerability is VDB-216251. NOTE: Most sources redirect to the encrypted site which limits the possibilities of an attack.

The affected products contain vulnerable firmware, which could allow an attacker to sniff the traffic and decrypt login credential details. This could give an attacker admin rights through the HTTP web server.

In phpipam/phpipam version 1.5.1, the Secure attribute for sensitive cookies in HTTPS sessions is not set. This could cause the user agent to send those cookies in plaintext over an HTTP session, potentially exposing sensitive information. The issue is fixed in version 1.7.0.

Procom NetFORCE 800 4.02 M10 Build 20 and possibly other versions sends the NIS password map (passwd.nis) as a file attachment in diagnostic e-mail messages, which allows remote attackers to obtain the cleartext NIS password hashes.

The Credova_Financial WordPress plugin discloses a site's associated Credova API account username and password in plaintext via an AJAX action whenever a site user goes to checkout on a page that has the Credova Financing option enabled. This affects versions up to, and including, 1.4.8.

An information disclosure vulnerability exists in the Web Application functionality of Moxa MXView Series 3.2.4. Network sniffing can lead to a disclosure of sensitive information. An attacker can sniff network traffic to exploit this vulnerability.