An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service "I/O-Check" functionality of WAGO PFC 200. An attacker can send a specially crafted packet to trigger the parsing of this cache file. At 0x1ea28 the extracted state value from the xml file is used as an argument to /etc/config-tools/config_interfaces interface=X1 state=<contents of state node> using sprintf(). The destination buffer sp+0x40 is overflowed with the call to sprintf() for any state values that are greater than 512-len("/etc/config-tools/config_interfaces interface=X1 state=") in length. Later, at 0x1ea08 strcpy() is used to copy the contents of the stack buffer that was overflowed sp+0x40 into sp+0x440. The buffer sp+0x440 is immediately adjacent to sp+0x40 on the stack. Therefore, there is no NULL termination on the buffer sp+0x40 since it overflowed into sp+0x440. The strcpy() will result in invalid memory access. An state value of length 0x3c9 will cause the service to crash.
Crafted web server requests may cause a heap-based buffer overflow and could therefore trigger a denial-of- service condition due to a crash in the CODESYS V2 web server prior to V1.1.9.22.
In WAGO I/O-Check Service in multiple products an unauthenticated remote attacker can send a specially crafted packet containing OS commands to crash the iocheck process and write memory resulting in loss of integrity and DoS.
In WAGO I/O-Check Service in multiple products an attacker can send a specially crafted packet containing OS commands to crash the diagnostic tool and write memory.
CODESYS V2 runtime system SP before 2.4.7.55 has a Heap-based Buffer Overflow.
CODESYS V2 Web-Server before 1.1.9.20 has a Stack-based Buffer Overflow.
CODESYS V2 runtime system SP before 2.4.7.55 has a Stack-based Buffer Overflow.
CODESYS V2 Web-Server before 1.1.9.20 has a a Buffer Copy without Checking the Size of the Input.
eap.c in pppd in ppp 2.4.2 through 2.4.8 has an rhostname buffer overflow in the eap_request and eap_response functions.
An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can cause a stack buffer overflow, resulting in code execution. An attacker can send a specially crafted packet to trigger the parsing of this cache file. The destination buffer sp+0x440 is overflowed with the call to sprintf() for any subnetmask values that are greater than 1024-len(‘/etc/config-tools/config_interfaces interface=X1 state=enabled subnet-mask=‘) in length. A subnetmask value of length 0x3d9 will cause the service to crash.
An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). The destination buffer sp+0x440 is overflowed with the call to sprintf() for any domainname values that are greater than 1024-len(‘/etc/config-tools/edit_dns_server domain-name=‘) in length. A domainname value of length 0x3fa will cause the service to crash.
An exploitable heap buffer overflow vulnerability exists in the iocheckd service ''I/O-Chec'' functionality of WAGO PFC 200 Firmware version 03.01.07(13) and 03.00.39(12), and WAGO PFC100 Firmware version 03.00.39(12). A specially crafted set of packets can cause a heap buffer overflow, potentially resulting in code execution. An attacker can send unauthenticated packets to trigger this vulnerability.
An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file.The destination buffer sp+0x440 is overflowed with the call to sprintf() for any type values that are greater than 1024-len(‘/etc/config-tools/config_interfaces interface=X1 state=enabled config-type=‘) in length. A type value of length 0x3d9 will cause the service to crash.
An exploitable stack buffer overflow vulnerability exists in the iocheckd service ''I/O-Check'' functionality of WAGO PFC200 Firmware version 03.01.07(13), WAGO PFC200 Firmware version 03.00.39(12) and WAGO PFC100 Firmware version 03.00.39(12). A specially crafted set of packets can cause a stack buffer overflow, resulting in code execution. An attacker can send unauthenticated packets to trigger this vulnerability.
An exploitable heap buffer overflow vulnerability exists in the iocheckd service I/O-Check functionality of WAGO PFC200 Firmware version 03.01.07(13), WAGO PFC200 Firmware version 03.00.39(12), and WAGO PFC100 Firmware version 03.00.39(12). A specially crafted set of packets can cause a heap buffer overflow, potentially resulting in code execution. An attacker can send unauthenticated packets to trigger this vulnerability.
An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. The destination buffer sp+0x440 is overflowed with the call to sprintf() for any hostname values that are greater than 1024-len(‘/etc/config-tools/change_hostname hostname=‘) in length. A hostname value of length 0x3fd will cause the service to crash.
An exploitable stack buffer overflow vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 version 03.02.02(14). A specially crafted XML cache file written to a specific location on the device can cause a stack buffer overflow, resulting in code execution. An attacker can send a specially crafted packet to trigger the parsing of this cache file.
An exploitable stack buffer overflow vulnerability exists in the command line utility getcouplerdetails of WAGO PFC200 Firmware versions 03.01.07(13) and 03.00.39(12), and WAGO PFC100 Firmware version 03.00.39(12). A specially crafted set of packets sent to the iocheckd service "I/O-Check" can cause a stack buffer overflow in the sub-process getcouplerdetails, resulting in code execution. An attacker can send unauthenticated packets to trigger this vulnerability.
An exploitable heap buffer overflow vulnerability exists in the iocheckd service "I/O-Check" functionality of WAGO PFC200 Firmware versions 03.01.07(13) and 03.00.39(12), and WAGO PFC100 Firmware version 03.00.39(12). A specially crafted set of packets can cause a heap buffer overflow, potentially resulting in code execution. An attacker can send unauthenticated packets to trigger this vulnerability.
An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file. The destination buffer sp+0x440 is overflowed with the call to sprintf() for any ip values that are greater than 1024-len(‘/etc/config-tools/config_interfaces interface=X1 state=enabled ip-address=‘) in length. A ip value of length 0x3da will cause the service to crash.
An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file.
An unauthenticated remote attacker can abuse unsafe sscanf calls within the check_account() function to write arbitrary data into fixed-size stack buffers which leads to full device compromise.
An unautheticated remote attacker could send specifically crafted packets to a affected device. If an authenticated user then views that data in a specific page of the web-based management a buffer overflow will be triggered to gain full access of the device.
CODESYS V2 Web-Server before 1.1.9.20 has an Out-of-bounds Write.
An exploitable stack buffer overflow vulnerability vulnerability exists in the iocheckd service ‘I/O-Check’ functionality of WAGO PFC 200 Firmware version 03.02.02(14). An attacker can send a specially crafted packet to trigger the parsing of this cache file.The destination buffer sp+0x40 is overflowed with the call to sprintf() for any gateway values that are greater than 512-len(‘/etc/config-tools/config_default_gateway number=0 state=enabled value=‘) in length. A gateway value of length 0x7e2 will cause the service to crash.
An unauthenticated remote attacker can abuse unsafe sscanf calls within the check_cookie() function to write arbitrary data into fixed-size stack buffers which leads to full device compromise.
A flaw was found in the Linux kernel's handle_rx() function in the [vhost_net] driver. A malicious virtual guest, under specific conditions, can trigger an out-of-bounds write in a kmalloc-8 slab on a virtual host which may lead to a kernel memory corruption and a system panic. Due to the nature of the flaw, privilege escalation cannot be fully ruled out. Versions from v4.16 and newer are vulnerable.
An out-of-bounds memory write flaw was found in the Linux kernel’s Transport Layer Security functionality in how a user calls a function splice with a ktls socket as the destination. This flaw allows a local user to crash or potentially escalate their privileges on the system.
An issue was discovered in the aovec crate through 2020-12-10 for Rust. Because Aovec<T> does not have bounds on its Send trait or Sync trait, a data race and memory corruption can occur.
The command-line argument parser in tcpdump before 4.99.0 has a buffer overflow in tcpdump.c:read_infile(). To trigger this vulnerability the attacker needs to create a 4GB file on the local filesystem and to specify the file name as the value of the -F command-line argument of tcpdump.
Redis is an in-memory database that persists on disk. A specially crafted `XAUTOCLAIM` command on a stream key in a specific state may result with heap overflow, and potentially remote code execution. This problem affects versions on the 7.x branch prior to 7.0.4. The patch is released in version 7.0.4.
An issue was discovered in the gfwx crate before 0.3.0 for Rust. Because ImageChunkMut does not have bounds on its Send trait or Sync trait, a data race and memory corruption can occur.
A race condition was found in the Linux kernel's IP framework for transforming packets (XFRM subsystem) when multiple calls to xfrm_probe_algs occurred simultaneously. This flaw could allow a local attacker to potentially trigger an out-of-bounds write or leak kernel heap memory by performing an out-of-bounds read and copying it into a socket.
u'Non-secure memory is touched multiple times during TrustZone\u2019s execution and can lead to privilege escalation or memory corruption' in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8098, IPQ8074, Kamorta, MDM9150, MDM9206, MDM9607, MDM9650, MSM8905, MSM8909, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8998, QCA8081, QCS404, QCS605, QCS610, QM215, Rennell, SA415M, SC7180, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX24, SM6150, SM7150, SM8150, SXR1130
A TOCTOU mismatch in the NFS client code in the Linux kernel before 5.8.3 could be used by local attackers to corrupt memory or possibly have unspecified other impact because a size check is in fs/nfs/nfs4proc.c instead of fs/nfs/nfs4xdr.c, aka CID-b4487b935452.
QEMU 5.0.0 has a heap-based Buffer Overflow in flatview_read_continue in exec.c because hw/sd/sdhci.c mishandles a write operation in the SDHC_BLKSIZE case.
An out-of-bounds write issue was addressed with improved bounds checking. This issue is fixed in macOS Monterey 12.4. An attacker that has already achieved code execution in macOS Recovery may be able to escalate to kernel privileges.
A vulnerability was found in perl 5.30.0 through 5.38.0. This issue occurs when a crafted regular expression is compiled by perl, which can allow an attacker controlled byte buffer overflow in a heap allocated buffer.
A heap out-of-bounds write vulnerability in the Linux kernel's Performance Events system component can be exploited to achieve local privilege escalation. A perf_event's read_size can overflow, leading to an heap out-of-bounds increment or write in perf_read_group(). We recommend upgrading past commit 382c27f4ed28f803b1f1473ac2d8db0afc795a1b.
A Memory Corruption vulnerability for DWF and DWFX files in Autodesk AutoCAD 2022, 2021, 2020, 2019 and Autodesk Navisworks 2022 may lead to code execution through maliciously crafted DLL files.
Insufficient checking of memory buffer in ASP Secure OS may allow an attacker with a malicious TA to read/write to the ASP Secure OS kernel virtual address space, potentially leading to privilege escalation.
Win32k Elevation of Privilege Vulnerability
In preloader (usb), there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege, for an attacker who has physical access to the device, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS06160806; Issue ID: ALPS06160485.
In preloader (usb), there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege, for an attacker who has physical access to the device, with no additional execution privileges needed. User interaction is needed for exploitation. Patch ID: ALPS06160806; Issue ID: ALPS06160820.
This vulnerability allows local attackers to escalate privileges on vulnerable installations of Joyent SmartOS release-20170803-20170803T064301Z. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the DTrace DOF files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated object. An attacker can leverage this vulnerability to execute code under the context of the host OS. Was ZDI-CAN-5106.
This vulnerability allows local attackers to escalate privileges on vulnerable installations of Joyent SmartOS release-20170803-20170803T064301Z. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability. The specific flaw exists within the SMB_IOC_SVCENUM IOCTL. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a fixed-length, heap-based buffer. An attacker can leverage this vulnerability to execute code under the context of the host OS. Was ZDI-CAN-4983.
In the Linux kernel, the following vulnerability has been resolved: drm/dp_mst: Fix resetting msg rx state after topology removal If the MST topology is removed during the reception of an MST down reply or MST up request sideband message, the drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with the reading/parsing of the message from another thread via drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is possible since the reader/parser doesn't hold any lock while accessing the reception state. This in turn can lead to a memory corruption in the reader/parser as described by commit bd2fccac61b4 ("drm/dp_mst: Fix MST sideband message body length check"). Fix the above by resetting the message reception state if needed before reading/parsing a message. Another solution would be to hold the drm_dp_mst_topology_mgr::lock for the whole duration of the message reception/parsing in drm_dp_mst_handle_down_rep() and drm_dp_mst_handle_up_req(), however this would require a bigger change. Since the fix is also needed for stable, opting for the simpler solution in this patch.
In thermal, there is a possible out of bounds write due to a race condition. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS09698599; Issue ID: MSV-3228.
A Memory Corruption vulnerability may lead to code execution through maliciously crafted DLL files through PDFTron earlier than 9.0.7 version.
Out-of-bounds write in handling of macro blocks for MPEG4 codec in libsavsvc.so prior to Android 15 allows local attackers to write out-of-bounds memory.