Baxter ExactaMix EM 2400 Versions 1.10, 1.11 and ExactaMix EM1200 Versions 1.1, 1.2 systems use cleartext messages to communicate order information with an order entry system. This could allow an attacker with network access to view sensitive data including PHI.

Baxter PrismaFlex all versions, PrisMax all versions prior to 3.x, The affected devices do not implement data-in-transit encryption (e.g., TLS/SSL) when configured to send treatment data to a PDMS (Patient Data Management System) or an EMR (Electronic Medical Record) system. An attacker could observe sensitive data sent from the device.

Baxter PrismaFlex all versions, PrisMax all versions prior to 3.x, The affected devices do not implement data-in-transit encryption (e.g., TLS/SSL) when configured to send treatment data to a PDMS (Patient Data Management System) or an EMR (Electronic Medical Record) system. An attacker could observe sensitive data sent from the device.

Phoenix Hemodialysis Delivery System SW 3.36 and 3.40, The Phoenix Hemodialysis device does not support data-in-transit encryption (e.g., TLS/SSL) when transmitting treatment and prescription data on the network between the Phoenix system and the Exalis dialysis data management tool. An attacker with access to the network could observe sensitive treatment and prescription data sent between the Phoenix system and the Exalis tool.

Baxter SIGMA Spectrum Infusion System version 6.05 (model 35700BAX) with wireless battery module (WBM) version 16 has a default account with hard-coded credentials used with the FTP protocol. Baxter asserts no files can be transferred to or from the WBM using this account. Baxter has released a new version of the SIGMA Spectrum Infusion System, Version 8, which incorporates hardware and software changes.

In Connex health portal released before8/30/2024, SQL injection vulnerabilities were found that could have allowed an unauthenticated attacker to gain unauthorized access to Connex portal's database.  An attacker could have submitted a crafted payload to Connex portal that could have resulted in modification and disclosure of database content and/or perform administrative operations including shutting down the database.

The impacted products, when configured to use SSO, are affected by an improper authentication vulnerability. This vulnerability allows the application to accept manual entry of any active directory (AD) account provisioned in the application without supplying a password, resulting in access to the application as the supplied AD account, with all associated privileges.

The Baxter Spectrum WBM (v17, v20D29, v20D30, v20D31, and v22D24) when used in conjunction with a Baxter Spectrum v8.x (model 35700BAX2), operates a Telnet service on Port 1023 with hard-coded credentials.

The Baxter Spectrum WBM (v17, v20D29, v20D30, v20D31, and v22D24) when configured for wireless networking the FTP service operating on the WBM remains operational until the WBM is rebooted.

Baxter ExactaMix EM 2400 & EM 1200, Versions ExactaMix EM2400 Versions 1.10, 1.11, 1.13, 1.14, ExactaMix EM1200 Versions 1.1, 1.2, 1.4, 1.5, Baxter ExactaMix EM 2400 Versions 1.10, 1.11, 1.13, 1.14 and ExactaMix EM1200 Versions 1.1, 1.2, 1.4 and 1.5 have hard-coded administrative account credentials for the ExactaMix operating system. Successful exploitation of this vulnerability may allow an attacker who has gained unauthorized access to system resources, including access to execute software or to view/update files, directories, or system configuration. This could allow an attacker with network access to view sensitive data including PHI.

The Baxter Spectrum WBM (v17, v20D29, v20D30, v20D31, and v22D24), when used with a Baxter Spectrum v8.x (model 35700BAX2) in a factory-default wireless configuration enables an FTP service with hard-coded credentials.

Improper data protection on the ventilator's serial interface could allow an attacker to send and receive messages that result in unauthorized disclosure of information and/or have unintended impacts on device settings and performance.

Handling of the close_notify SSL/TLS message does not lead to a connection closure, leading the server to retain the socket opened and to have the client potentially receive clear text messages afterward. Mitigation: 2.0.20 users should migrate to 2.0.21, 2.1.0 users should migrate to 2.1.1. This issue affects: Apache MINA.

There are few web pages associated with the genie app on the Netgear WNDR4500 running firmware version V1.0.1.40_1.0.6877. Genie app adds some capabilities over the Web GUI and can be accessed even when you are away from home. A remote attacker can access genie_ping.htm or genie_ping2.htm or genie_ping3.htm page without authentication. Once accessed, the page will be redirected to the aCongratulations2.htma page, which reveals some sensitive information such as 2.4GHz & 5GHz Wireless Network Name (SSID) and Network Key (Password) in clear text.

The FSX / P3Dv4 installer 2.0.1.231 for Flight Sim Labs A320-X sends a user's Google account credentials to http://installLog.flightsimlabs.com/LogHandler3.ashx if a pirated serial number has been entered, which allows remote attackers to obtain sensitive information, e.g., by sniffing the network for cleartext HTTP traffic. This behavior was removed in 2.0.1.232.

A cleartext transmission of sensitive information vulnerability exists in Schneider Electric's 66074 MGE Network Management Card Transverse installed in MGE UPS and MGE STS. he integrated web server (Port 80/443/TCP) of the affected devices could allow remote attackers to discover an administrative account. If default on device, it is not using a SSL in settings and if multiple request of the page "Access Control" (IP-address device/ups/pas_cont.htm) account data will be sent in cleartext

An issue was discovered in certain Apple products. iOS before 11.4 is affected. macOS before 10.13.5 is affected. The issue involves the "Mail" component. It allows remote attackers to read the cleartext content of S/MIME encrypted messages via direct exfiltration.

A CWE-319: Cleartext transmission of sensitive information vulnerability exists that could cause disclosure of sensitive information, denial of service, or modification of data if an attacker is able to intercept network traffic.

Some device communications in some Motorola-branded Binatone Hubble Cameras with backend Hubble services are not encrypted which could lead to the communication channel being accessible by an attacker.

The Syrus4 IoT gateway utilizes an unsecured MQTT server to download and execute arbitrary commands, allowing a remote unauthenticated attacker to execute code on any Syrus4 device connected to the cloud service. The MQTT server also leaks the location, video and diagnostic data from each connected device. An attacker who knows the IP address of the server is able to connect and perform the following operations: * Get location data of the vehicle the device is connected to * Send CAN bus messages via the ECU module ( https://syrus.digitalcomtech.com/docs/ecu-1 https://syrus.digitalcomtech.com/docs/ecu-1 ) * Immobilize the vehicle via the safe-immobilizer module ( https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization https://syrus.digitalcomtech.com/docs/system-tools#safe-immobilization ) * Get live video through the connected video camera * Send audio messages to the driver ( https://syrus.digitalcomtech.com/docs/system-tools#apx-tts https://syrus.digitalcomtech.com/docs/system-tools#apx-tts )

Philips Vue PACS versions 12.2.x.x and prior transmits sensitive or security-critical data in cleartext in a communication channel that can be sniffed by unauthorized actors.

Automation Direct CLICK PLC CPU Modules: C0-1x CPUs with firmware prior to v3.00 passwords are sent as plaintext during unlocking and project transfers. An attacker who has network visibility can observe the password exchange.

The affected ThroughTek P2P products (SDKs using versions before 3.1.5, any versions with nossl tag, device firmware not using AuthKey for IOTC conneciton, firmware using AVAPI module without enabling DTLS mechanism, and firmware using P2PTunnel or RDT module) do not sufficiently protect data transferred between the local device and ThroughTek servers. This can allow an attacker to access sensitive information, such as camera feeds.

The Google Cardboard application 1.8 for Android and 1.2 for iOS sends potentially private cleartext information to the Unity 3D Stats web site, as demonstrated by device make, model, and OS.

In JetBrains WebStorm before 2021.1, HTTP requests were used instead of HTTPS.

A cleartext transmission of sensitive information vulnerability has been reported to affect certain QTS devices. If exploited, this vulnerability allows a remote attacker to gain access to sensitive information. QNAP have already fixed this vulnerability in the following versions: QTS 4.4.3.1354 build 20200702 (and later)

An issue was discovered on COROS PACE 3 devices through 3.0808.0. It implements a function to connect the watch to a WLAN. With WLAN access, the COROS Pace 3 downloads firmware files via HTTP. However, the communication is not encrypted and allows sniffing and machine-in-the-middle attacks.

A vulnerability has been identified in SICAM PAS/PQS (All versions < V7.0). Affected software transmits the database credentials for the inbuilt SQL server in cleartext. In combination with the by default enabled xp_cmdshell feature unauthenticated remote attackers could execute custom OS commands. At the time of assigning the CVE, the affected firmware version of the component has already been superseded by succeeding mainline versions.

An issue was discovered in the Daimler Mercedes-Benz Me app 2.11.0-846 for iOS. The encrypted Connected Vehicle API data exchange between the app and a server might be intercepted. The app can be used to operate the Remote Parking Pilot, unlock the vehicle, or obtain sensitive information such as latitude, longitude, and direction of travel.

When users are configured to use startTLS with RBAC LDAP, at login time, the user's credentials are sent via plaintext to the LDAP server. This affects Puppet Enterprise 2018.1.3, 2017.3.9, and 2016.4.14, and is fixed in Puppet Enterprise 2018.1.4, 2017.3.10, and 2016.4.15. It scored an 8.5 CVSS score.

D-Link DIR-865L Ax 1.20B01 Beta devices have Cleartext Transmission of Sensitive Information.

BigFix Inventory up to v10.0.2 does not set the secure flag for the session cookie in an https session, which can cause the cookie to be sent in http requests and make it easier for remote attackers to capture this cookie.

Moxa OnCell G3100-HSPA Series version 1.6 Build 17100315 and prior use a proprietary monitoring protocol that does not provide confidentiality, integrity, and authenticity security controls. All information is sent in plain text, and can be intercepted and modified. The protocol is vulnerable to remote unauthenticated disclosure of sensitive information, including the administrator's password. Under certain conditions, it's also possible to retrieve additional information, such as content of HTTP requests to the device, or the previously used password, due to memory leakages.

Cleartext Transmission of Sensitive Information in /northstar/Admin/login.jsp in Northstar Technologies Inc NorthStar Club Management 6.3 allows remote local user to intercept users credentials transmitted in cleartext over HTTP.

GE UR firmware versions prior to version 8.1x web server interface is supported on UR over HTTP protocol. It allows sensitive information exposure without authentication.

DELL ESI (Enterprise Storage Integrator) for SAP LAMA, version 10.0, contains an information disclosure vulnerability in EHAC component. An remote unauthenticated attacker could potentially exploit this vulnerability by eavesdropping the network traffic to gain admin level credentials.

Joomla! 1.5.8 does not set the secure flag for the session cookie in an https session, which makes it easier for remote attackers to capture this cookie by intercepting its transmission within an http session.

CloudClassroom-PHP-Project v1.0 is affected by an insecure credential transmission vulnerability. The application transmits passwords over unencrypted HTTP during the login process, exposing sensitive credentials to potential interception by network-based attackers. A remote attacker with access to the same network (e.g., public Wi-Fi or compromised router) can capture login credentials via Man-in-the-Middle (MitM) techniques. If the attacker subsequently uses the credentials to log in and exploit administrative functions (e.g., file upload), this may lead to remote code execution depending on the environment.

Intuit Lacerte 2017 for Windows in a client/server environment transfers the entire customer list in cleartext over SMB, which allows attackers to (1) obtain sensitive information by sniffing the network or (2) conduct man-in-the-middle (MITM) attacks via unspecified vectors. The customer list contains each customer's full name, social security number (SSN), address, job title, phone number, Email address, spouse's phone/Email address, and other sensitive information. After the client software authenticates to the server database, the server sends the customer list. There is no need for further exploitation as all sensitive data is exposed. This vulnerability was validated on Intuit Lacerte 2017, however older versions of Lacerte may be vulnerable.

Technicolor TC7337NET 08.89.17.23.03 devices allow remote attackers to discover passwords by sniffing the network for an "Authorization: Basic" HTTP header.

A user can tell curl >= 7.20.0 and <= 7.78.0 to require a successful upgrade to TLS when speaking to an IMAP, POP3 or FTP server (`--ssl-reqd` on the command line or`CURLOPT_USE_SSL` set to `CURLUSESSL_CONTROL` or `CURLUSESSL_ALL` withlibcurl). This requirement could be bypassed if the server would return a properly crafted but perfectly legitimate response.This flaw would then make curl silently continue its operations **withoutTLS** contrary to the instructions and expectations, exposing possibly sensitive data in clear text over the network.

A CWE-319: Cleartext transmission of sensitive information vulnerability exists in PowerLogic ION7400, ION7650, ION7700/73xx, ION83xx/84xx/85xx/8600, ION8650, ION8800, ION9000 and PM800 (see notification for affected versions), that could cause disclosure of user credentials when a malicious actor intercepts Telnet network traffic between a user and the device.

A CWE-319: Cleartext transmission of sensitive information vulnerability exists in PowerLogic ION7400, ION7650, ION83xx/84xx/85xx/8600, ION8650, ION8800, ION9000 and PM800 (see notification for affected versions), that could cause disclosure of user credentials when a malicious actor intercepts HTTP network traffic between a user and the device.

Wrongthink peer-to-peer, end-to-end encrypted messenger with PeerJS and Axolotl ratchet. In wrongthink from version 2.0.0 and before 2.3.0 there was a set of vulnerabilities causing inadequate encryption strength. Part of the secret identity key was disclosed by the fingerprint used for connection. Additionally, the safety number was improperly calculated. It was computed using part of one of the public identity keys instead of being derived from both public identity keys. This caused issues in computing safety numbers which would potentially be exploitable in the real world. Additionally there was inadequate encryption strength due to use of 1024-bit DSA keys. These issues are all fixed in version 2.3.0.

Cleartext Transmission of Sensitive InformationCleartext transmission of sensitive information vulnerability in MELSEC iQ-R series Safety CPU R08/16/32/120SFCPU firmware versions "26" and prior and MELSEC iQ-R series SIL2 Process CPU R08/16/32/120PSFCPU firmware versions "11" and prior allows a remote unauthenticated attacker to login to a target CPU module by obtaining credentials other than password.

In Fibaro Home Center 2 and Lite devices in all versions provide a web based management interface over unencrypted HTTP protocol. Communication between the user and the device can be eavesdropped to hijack sessions, tokens and passwords.

Video Insight VMS versions prior to 7.8 allows a remote attacker to execute arbitrary code with the system user privilege by sending a specially crafted request.

IBM Security Verify Information Queue 1.0.6 and 1.0.7 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques. IBM X-Force ID: 196188.

Netgear Nighthawk R6700 version 1.0.4.120 does not utilize secure communication methods to the web interface. By default, all communication to/from the device's web interface is sent via HTTP, which causes potentially sensitive information (such as usernames and passwords) to be transmitted in cleartext.

An issue was discovered in certain Apple products. iOS before 11 is affected. The issue involves the "MobileBackup" component. It allows remote attackers to obtain sensitive cleartext information in opportunistic circumstances by leveraging read access to a backup archive that was supposed to have been encrypted.