Stack-based buffer overflow in hw/scsi/scsi-bus.c in QEMU, when built with SCSI-device emulation support, allows guest OS users with CAP_SYS_RAWIO permissions to cause a denial of service (instance crash) via an invalid opcode in a SCSI command descriptor block.

An integer overflow was found in QEMU 4.0.1 through 4.2.0 in the way it implemented ATI VGA emulation. This flaw occurs in the ati_2d_blt() routine in hw/display/ati-2d.c while handling MMIO write operations through the ati_mm_write() callback. A malicious guest could abuse this flaw to crash the QEMU process, resulting in a denial of service.

In QEMU through 5.0.0, an integer overflow was found in the SM501 display driver implementation. This flaw occurs in the COPY_AREA macro while handling MMIO write operations through the sm501_2d_engine_write() callback. A local attacker could abuse this flaw to crash the QEMU process in sm501_2d_operation() in hw/display/sm501.c on the host, resulting in a denial of service.

A divide-by-zero issue was found in dwc2_handle_packet in hw/usb/hcd-dwc2.c in the hcd-dwc2 USB host controller emulation of QEMU. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service.

A potential DoS flaw was found in the virtio-fs shared file system daemon (virtiofsd) implementation of the QEMU version >= v5.0. Virtio-fs is meant to share a host file system directory with a guest via virtio-fs device. If the guest opens the maximum number of file descriptors under the shared directory, a denial of service may occur. This flaw allows a guest user/process to cause this denial of service on the host.

The sosendto function in slirp/udp.c in QEMU before 2.1.2 allows local users to cause a denial of service (NULL pointer dereference) by sending a udp packet with a value of 0 in the source port and address, which triggers access of an uninitialized socket.

Use-after-free vulnerability in hw/pci/pcie.c in QEMU (aka Quick Emulator) allows local guest OS users to cause a denial of service (QEMU instance crash) via hotplug and hotunplug operations of Virtio block devices.

QEMU, possibly before 2.0.0, allows local users to cause a denial of service (divide-by-zero error and crash) via a zero value in the (1) tracks field to the seek_to_sector function in block/parallels.c or (2) extent_size field in the bochs function in block/bochs.c.

A flaw was found in the vhost-vsock device of QEMU. In case of error, an invalid element was not detached from the virtqueue before freeing its memory, leading to memory leakage and other unexpected results. Affected QEMU versions <= 6.2.0.

hw/ide/pci.c in QEMU before 5.1.1 can trigger a NULL pointer dereference because it lacks a pointer check before an ide_cancel_dma_sync call.

QEMU 5.0.0 has a use-after-free in hw/usb/hcd-xhci.c because the usb_packet_map return value is not checked.

fdctrl_write_data in hw/block/fdc.c in QEMU 5.0.0 has a NULL pointer dereference via a NULL block pointer for the current drive.

A reachable assertion issue was found in the USB EHCI emulation code of QEMU. It could occur while processing USB requests due to missing handling of DMA memory map failure. A malicious privileged user within the guest may abuse this flaw to send bogus USB requests and crash the QEMU process on the host, resulting in a denial of service.

An integer overflow issue was found in the vmxnet3 NIC emulator of the QEMU for versions up to v5.2.0. It may occur if a guest was to supply invalid values for rx/tx queue size or other NIC parameters. A privileged guest user may use this flaw to crash the QEMU process on the host resulting in DoS scenario.

Memory leak in QEMU (aka Quick Emulator), when built with IDE AHCI Emulation support, allows local guest OS privileged users to cause a denial of service (memory consumption) by repeatedly hot-unplugging the AHCI device.

Memory leak in the virtio_gpu_set_scanout function in hw/display/virtio-gpu.c in QEMU (aka Quick Emulator) allows local guest OS users to cause a denial of service (memory consumption) via a large number of "VIRTIO_GPU_CMD_SET_SCANOUT:" commands.

The (1) v9fs_create and (2) v9fs_lcreate functions in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allow local guest OS privileged users to cause a denial of service (file descriptor or memory consumption) via vectors related to an already in-use fid.

The ohci_service_ed_list function in hw/usb/hcd-ohci.c in QEMU (aka Quick Emulator) before 2.9.0 allows local guest OS users to cause a denial of service (infinite loop) via vectors involving the number of link endpoint list descriptors, a different vulnerability than CVE-2017-9330.

QEMU 0.8.2 allows local users to halt a virtual machine by executing the icebp instruction.

In QEMU 4.2.0, a MemoryRegionOps object may lack read/write callback methods, leading to a NULL pointer dereference.

QEMU 0.8.2 allows local users to crash a virtual machine via the divisor operand to the aam instruction, as demonstrated by "aam 0x0," which triggers a divide-by-zero error.

In QEMU through 5.0.0, an assertion failure can occur in the network packet processing. This issue affects the e1000e and vmxnet3 network devices. A malicious guest user/process could use this flaw to abort the QEMU process on the host, resulting in a denial of service condition in net_tx_pkt_add_raw_fragment in hw/net/net_tx_pkt.c.

QEMU (aka Quick Emulator) built with the TPR optimization for 32-bit Windows guests support is vulnerable to a null pointer dereference flaw. It occurs while doing I/O port write operations via hmp interface. In that, 'current_cpu' remains null, which leads to the null pointer dereference. A user or process could use this flaw to crash the QEMU instance, resulting in DoS issue.

QEMU 4.2.0 has a use-after-free in hw/net/e1000e_core.c because a guest OS user can trigger an e1000e packet with the data's address set to the e1000e's MMIO address.

oss_write in audio/ossaudio.c in QEMU before 5.0.0 mishandles a buffer position.

The mode4and5 write functions in hw/display/cirrus_vga.c in Qemu allow local OS guest privileged users to cause a denial of service (out-of-bounds write access and Qemu process crash) via vectors related to dst calculation.

A flaw was found in the QEMU implementation of VMWare's paravirtual RDMA device. The issue occurs while handling a "PVRDMA_CMD_CREATE_MR" command due to improper memory remapping (mremap). This flaw allows a malicious guest to crash the QEMU process on the host. The highest threat from this vulnerability is to system availability.

A stack overflow vulnerability was found in the Intel HD Audio device (intel-hda) of QEMU. A malicious guest could use this flaw to crash the QEMU process on the host, resulting in a denial of service condition. The highest threat from this vulnerability is to system availability. This flaw affects QEMU versions prior to 7.0.0.

A flaw was found in the USB redirector device (usb-redir) of QEMU. Small USB packets are combined into a single, large transfer request, to reduce the overhead and improve performance. The combined size of the bulk transfer is used to dynamically allocate a variable length array (VLA) on the stack without proper validation. Since the total size is not bounded, a malicious guest could use this flaw to influence the array length and cause the QEMU process to perform an excessive allocation on the stack, resulting in a denial of service.

A NULL pointer dereference flaw was found in the floppy disk emulator of QEMU. This issue occurs while processing read/write ioport commands if the selected floppy drive is not initialized with a block device. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

The intel_hda_xfer function in hw/audio/intel-hda.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) via an entry with the same value for buffer length and pointer position.

A NULL pointer dereference flaw was found in the am53c974 SCSI host bus adapter emulation of QEMU in versions before 6.0.0. This issue occurs while handling the 'Information Transfer' command. This flaw allows a privileged guest user to crash the QEMU process on the host, resulting in a denial of service. The highest threat from this vulnerability is to system availability.

The rtl8139_cplus_transmit function in hw/net/rtl8139.c in QEMU (aka Quick Emulator) allows local guest OS administrators to cause a denial of service (infinite loop and CPU consumption) by leveraging failure to limit the ring descriptor count.

Multiple integer overflows in the (1) v9fs_xattr_read and (2) v9fs_xattr_write functions in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allow local guest OS administrators to cause a denial of service (QEMU process crash) via a crafted offset, which triggers an out-of-bounds access.

Integer overflow in the emulated_apdu_from_guest function in usb/dev-smartcard-reader.c in Quick Emulator (Qemu), when built with the CCID Card device emulator support, allows local users to cause a denial of service (application crash) via a large Application Protocol Data Units (APDU) unit.

A stack-buffer-overflow was found in QEMU in the NVME component. The flaw lies in nvme_changed_nslist() where a malicious guest controlling certain input can read out of bounds memory. A malicious user could use this flaw leading to disclosure of sensitive information.

QEMU, through version 2.10 and through version 3.1.0, is vulnerable to an out-of-bounds read of up to 128 bytes in the hw/i2c/i2c-ddc.c:i2c_ddc() function. A local attacker with permission to execute i2c commands could exploit this to read stack memory of the qemu process on the host.

A heap out-of-bounds memory read flaw was found in the virtual nvme device in QEMU. The QEMU process does not validate an offset provided by the guest before computing a host heap pointer, which is used for copying data back to the guest. Arbitrary heap memory relative to an allocated buffer can be disclosed.

The load_multiboot function in hw/i386/multiboot.c in Quick Emulator (aka QEMU) allows local guest OS users to execute arbitrary code on the QEMU host via a mh_load_end_addr value greater than mh_bss_end_addr, which triggers an out-of-bounds read or write memory access.

An OOB heap buffer r/w access issue was found in the NVM Express Controller emulation in QEMU. It could occur in nvme_cmb_ops routines in nvme device. A guest user/process could use this flaw to crash the QEMU process resulting in DoS or potentially run arbitrary code with privileges of the QEMU process.

The megasas_lookup_frame function in QEMU, when built with MegaRAID SAS 8708EM2 Host Bus Adapter emulation support, allows local guest OS administrators to cause a denial of service (out-of-bounds read and crash) via unspecified vectors.

ide_atapi_cmd_reply_end in hw/ide/atapi.c in QEMU 5.1.0 allows out-of-bounds read access because a buffer index is not validated.

An out-of-bounds read flaw was found in the QXL display device emulation in QEMU. The qxl_phys2virt() function does not check the size of the structure pointed to by the guest physical address, potentially reading past the end of the bar space into adjacent pages. A malicious guest user could use this flaw to crash the QEMU process on the host causing a denial of service condition.

QEMU (aka Quick Emulator) built with the NE2000 device emulation support is vulnerable to an OOB r/w access issue. It could occur while performing 'ioport' r/w operations. A privileged (CAP_SYS_RAWIO) user/process could use this flaw to leak or corrupt QEMU memory bytes.

iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose unrelated information from process memory to an attacker.

An out-of-bounds read/write access flaw was found in the USB emulator of the QEMU in versions before 5.2.0. This issue occurs while processing USB packets from a guest when USBDevice 'setup_len' exceeds its 'data_buf[4096]' in the do_token_in, do_token_out routines. This flaw allows a guest user to crash the QEMU process, resulting in a denial of service, or the potential execution of arbitrary code with the privileges of the QEMU process on the host.

hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host controller driver.

Quick emulator (QEMU) built with the Cirrus CLGD 54xx VGA emulator support is vulnerable to an out-of-bounds access issue. It could occur while copying VGA data via bitblt copy in backward mode. A privileged user inside a guest could use this flaw to crash the QEMU process resulting in DoS or potentially execute arbitrary code on the host with privileges of QEMU process on the host.

An out-of-bounds memory access issue was found in Quick Emulator (QEMU) before 1.7.2 in the VNC display driver. This flaw could occur while refreshing the VNC display surface area in the 'vnc_refresh_server_surface'. A user inside a guest could use this flaw to crash the QEMU process.

Quick emulator (QEMU) before 2.8 built with the Cirrus CLGD 54xx VGA Emulator support is vulnerable to an out-of-bounds access issue. The issue could occur while copying VGA data in cirrus_bitblt_cputovideo. A privileged user inside guest could use this flaw to crash the QEMU process OR potentially execute arbitrary code on host with privileges of the QEMU process.