An issue was discovered in Squid before 4.15 and 5.x before 5.0.6. Due to a buffer-management bug, it allows a denial of service. When resolving a request with the urn: scheme, the parser leaks a small amount of memory. However, there is an unspecified attack methodology that can easily trigger a large amount of memory consumption.

In Eclipse Mosquitto 1.4.15 and earlier, a Memory Leak vulnerability was found within the Mosquitto Broker. Unauthenticated clients can send crafted CONNECT packets which could cause a denial of service in the Mosquitto Broker.

A memory leak flaw was found in WildFly OpenSSL in versions prior to 1.1.3.Final, where it removes an HTTP session. It may allow the attacker to cause OOM leading to a denial of service. The highest threat from this vulnerability is to system availability.

Stormshield SNS with versions before 3.7.18, 3.11.6 and 4.1.6 has a memory-management defect in the SNMP plugin that can lead to excessive consumption of memory and CPU resources, and possibly a denial of service.

Memory leak in USB HID dissector in Wireshark 3.4.0 to 3.4.2 allows denial of service via packet injection or crafted capture file

Unicorn Engine v2.0.0-rc7 and below was discovered to contain a memory leak via the function uc_close at /my/unicorn/uc.c.

A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4), SINAMICS GH150 (All versions), SINAMICS GL150 (with option X30) (All versions), SINAMICS GM150 (with option X30) (All versions), SINAMICS SH150 (All versions), SINAMICS SL150 (All versions), SINAMICS SM120 (All versions), SINAMICS SM150 (All versions), SINAMICS SM150i (All versions). SmartVNC has a heap allocation leak vulnerability in the device layout handler on client side, which could result in a Denial-of-Service condition.

An uncontrolled resource consumption (memory leak) flaw was found in ZeroMQ's src/xpub.cpp in versions before 4.3.3. This flaw allows a remote unauthenticated attacker to send crafted PUB messages that consume excessive memory if the CURVE/ZAP authentication is disabled on the server, causing a denial of service. The highest threat from this vulnerability is to system availability.

Manage Engine Asset Explorer Agent 1.0.34 listens on port 9000 for incoming commands over HTTPS from Manage Engine Server. The HTTPS certificates are not verified which allows any arbitrary user on the network to send commands over port 9000. While these commands may not be executed (due to authtoken validation), the Asset Explorer agent will reach out to the manage engine server for an HTTP request. During this process, AEAgent.cpp allocates 0x66 bytes using "malloc". This memory is never free-ed in the program, causing a memory leak. Additionally, the instruction sent to aeagent (ie: NEWSCAN, DELTASCAN, etc) is converted to a unicode string, but is never freed. These memory leaks allow a remote attacker to exploit a Denial of Service scenario through repetitively sending these commands to an agent and eventually crashing it the agent due to an out-of-memory condition.

Due to a memory leak, a denial-of-service vulnerability exists in the Rockwell Automation affected products. A malicious actor could exploit this vulnerability by performing multiple actions on certain web pages of the product causing the affected products to become fully unavailable and require a power cycle to recover.

In Eclipse Mosquitto up to version 2.0.18a, an attacker can achieve memory leaking, segmentation fault or heap-use-after-free by sending specific sequences of "CONNECT", "DISCONNECT", "SUBSCRIBE", "UNSUBSCRIBE" and "PUBLISH" packets.

Memory leaks were discovered in the CoAP library in Arm Mbed OS 5.15.3 when using the Arm mbed-coap library 5.1.5. The CoAP parser is responsible for parsing received CoAP packets. The function sn_coap_parser_options_parse() parses the CoAP option number field of all options present in the input packet. Each option number is calculated as a sum of the previous option number and a delta of the current option. The delta and the previous option number are expressed as unsigned 16-bit integers. Due to lack of overflow detection, it is possible to craft a packet that wraps the option number around and results in the same option number being processed again in a single packet. Certain options allocate memory by calling a memory allocation function. In the cases of COAP_OPTION_URI_QUERY, COAP_OPTION_URI_PATH, COAP_OPTION_LOCATION_QUERY, and COAP_OPTION_ETAG, there is no check on whether memory has already been allocated, which in conjunction with the option number integer overflow may lead to multiple assignments of allocated memory to a single pointer. This has been demonstrated to lead to memory leak by buffer orphaning. As a result, the memory is never freed.

When a canister method is called via ic_cdk::call* , a new Future CallFuture is created and can be awaited by the caller to get the execution result. Internally, the state of the Future is tracked and stored in a struct called CallFutureState. A bug in the polling implementation of the CallFuture allows multiple references to be held for this internal state and not all references were dropped before the Future is resolved. Since we have unaccounted references held, a copy of the internal state ended up being persisted in the canister's heap and thus causing a memory leak. Impact Canisters built in Rust with ic_cdk and ic_cdk_timers are affected. If these canisters call a canister method, use timers or heartbeat, they will likely leak a small amount of memory on every such operation. In the worst case, this could lead to heap memory exhaustion triggered by an attacker. Motoko based canisters are not affected by the bug. PatchesThe patch has been backported to all minor versions between >= 0.8.0, <= 0.15.0. The patched versions available are 0.8.2, 0.9.3, 0.10.1, 0.11.6, 0.12.2, 0.13.5, 0.14.1, 0.15.1 and their previous versions have been yanked. WorkaroundsThere are no known workarounds at the moment. Developers are recommended to upgrade their canister as soon as possible to the latest available patched version of ic_cdk to avoid running out of Wasm heap memory. Upgrading the canisters (without updating `ic_cdk`) also frees the leaked memory but it's only a temporary solution.

pdf2xml v2.0 was discovered to contain a memory leak in the function TextPage::testLinkedText.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier is susceptible to increased memory usage in the case where an HTTP/2 client requests a large payload but does not send enough window updates to consume the entire stream and does not reset the stream.

When running with FIPS mode enabled, Mirantis Container Runtime 20.10.8 leaks memory during TLS Handshakes which could be abused to cause a denial of service.

Some ZTE products have a DoS vulnerability. Due to the improper handling of memory release in some specific scenarios, a remote attacker can trigger the vulnerability by performing a series of operations, resulting in memory leak, which may eventually lead to device denial of service. This affects: ZXR10 9904, ZXR10 9908, ZXR10 9916, ZXR10 9904-S, ZXR10 9908-S; all versions up to V1.01.10.B12.

A flaw was found in Privoxy in versions before 3.0.29. Memory leak if multiple filters are executed and the last one is skipped due to a pcre error leading to a system crash.

A flaw was found in Privoxy in versions before 3.0.29. Memory leak in the show-status CGI handler when no filter files are configured can lead to a system crash.

A flaw was found in Privoxy in versions before 3.0.29. Memory leaks when a response is buffered and the buffer limit is reached or Privoxy is running out of memory can lead to a system crash.

A flaw was found in Privoxy in versions before 3.0.29. Memory leaks in the show-status CGI handler when memory allocations fail can lead to a system crash.

A memory leak vulnerability was found in Privoxy before 3.0.29 in the show-status CGI handler when no action files are configured.

A flaw was found in Privoxy in versions before 3.0.29. Memory leak when client tags are active can cause a system crash.

A flaw was found in Privoxy in versions before 3.0.29. Memory leaks in the client-tags CGI handler when client tags are configured and memory allocations fail can lead to a system crash.

A flaw was found in Privoxy in versions before 3.0.31. A memory leak that occurs when decompression fails unexpectedly may lead to a denial of service. The highest threat from this vulnerability is to system availability.

A vulnerability in the IPv4 protocol handling of Cisco StarOS could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory leak that occurs during packet processing. An attacker could exploit this vulnerability by sending a series of crafted IPv4 packets through an affected device. A successful exploit could allow the attacker to exhaust the available memory and cause an unexpected restart of the npusim process, leading to a DoS condition on the affected device.

Multiple vulnerabilities in the ingress packet processing function of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1.

On Juniper Networks SRX Series devices with link aggregation (lag) configured, executing any operation that fetches Aggregated Ethernet (AE) interface statistics, including but not limited to SNMP GET requests, causes a slow kernel memory leak. If all the available memory is consumed, the traffic will be impacted and a reboot might be required. The following log can be seen if this issue happens. /kernel: rt_pfe_veto: Memory over consumed. Op 1 err 12, rtsm_id 0:-1, msg type 72 /kernel: rt_pfe_veto: free kmem_map memory = (20770816) curproc = kmd An administrator can use the following CLI command to monitor the status of memory consumption (ifstat bucket): user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 2588977 162708K - 19633958 <<<< user@device > show system virtual-memory no-forwarding | match ifstat Type InUse MemUse HighUse Limit Requests Limit Limit Size(s) ifstat 3021629 189749K - 22914415 <<<< This issue affects Juniper Networks Junos OS on SRX Series: 17.1 versions 17.1R3 and above prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S5; 18.2 versions prior to 18.2R3-S7, 18.2R3-S8; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S7, 18.4R3-S6; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R1-S6; 19.3 versions prior to 19.3R3-S1; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2. This issue does not affect Juniper Networks Junos OS prior to 17.1R3.

There is a memory leak vulnerability in some versions of Huawei CloudEngine product. An unauthenticated, remote attacker may exploit this vulnerability by sending specific message to the affected product. Due to not release the allocated memory properly, successful exploit may cause memory leak.

In Wireshark 3.2.0 to 3.2.1, 3.0.0 to 3.0.8, and 2.6.0 to 2.6.14, the LTE RRC dissector could leak memory. This was addressed in epan/dissectors/packet-lte-rrc.c by adjusting certain append operations.

Memory leak in sharkd 4.6.0 to 4.6.4 and 4.4.0 to 4.4.14 allows denial of service

An ni_dhcp4_fsm_process_dhcp4_packet memory leak in openSUSE wicked 0.6.55 and earlier allows network attackers to cause a denial of service by sending DHCP4 packets with a different client-id.

An ni_dhcp4_parse_response memory leak in openSUSE wicked 0.6.55 and earlier allows network attackers to cause a denial of service by sending DHCP4 packets without a message type option.

When a challenge ACK is to be sent tcp_respond() constructs and sends the challenge ACK and consumes the mbuf that is passed in. When no challenge ACK should be sent the function returns and leaks the mbuf. If an attacker is either on path with an established TCP connection, or can themselves establish a TCP connection, to an affected FreeBSD machine, they can easily craft and send packets which meet the challenge ACK criteria and cause the FreeBSD host to leak an mbuf for each crafted packet in excess of the configured rate limit settings i.e. with default settings, crafted packets in excess of the first 5 sent within a 1s period will leak an mbuf. Technically, off-path attackers can also exploit this problem by guessing the IP addresses, TCP port numbers and in some cases the sequence numbers of established connections and spoofing packets towards a FreeBSD machine, but this is harder to do effectively.

An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by memory leaks from unauthenticated connections.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2.3, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, when a virtual server is configured with HTTP explicit proxy and has an attached HTTP_PROXY_REQUEST iRule, POST requests sent to the virtual server cause an xdata memory leak.

An exploitable denial-of-service vulnerability exists in the resource allocation handling of Videolabs libmicrodns 0.1.0. When encountering errors while parsing mDNS messages, some allocated data is not freed, possibly leading to a denial-of-service condition via resource exhaustion. An attacker can send one mDNS message repeatedly to trigger this vulnerability through decoding of the domain name performed by rr_decode.

An exploitable denial-of-service vulnerability exists in the resource allocation handling of Videolabs libmicrodns 0.1.0. When encountering errors while parsing mDNS messages, some allocated data is not freed, possibly leading to a denial-of-service condition via resource exhaustion. An attacker can send one mDNS message repeatedly to trigger this vulnerability through the function rr_read_RR [5] reads the current resource record, except for the RDATA section. This is read by the loop at in rr_read. For each RR type, a different function is called. When the RR type is 0x10, the function rr_read_TXT is called at [6].

Multiple memory leaks in isakmpd in OpenBSD 3.4 and earlier allow remote attackers to cause a denial of service (memory exhaustion) via certain ISAKMP packets, as demonstrated by the Striker ISAKMP Protocol Test Suite.

Multiple memory leaks in t1_lib.c in OpenSSL before 1.0.1u, 1.0.2 before 1.0.2i, and 1.1.0 before 1.1.0a allow remote attackers to cause a denial of service (memory consumption) via large OCSP Status Request extensions.

In BIG-IP APM versions 12.1.0-12.1.5.1 and 11.6.1-11.6.5.2, RADIUS authentication leaks memory when the username for authentication is not set.

A memory leak in the TFTP service in B&R Automation Runtime versions <N4.26, <N4.34, <F4.45, <E4.53, <D4.63, <A4.73 and prior could allow an unauthenticated attacker with network access to cause a denial of service (DoS) condition.

A memory leak exists in the Grassroots DICOM library (GDCM). The bug occurs when parsing malformed DICOM files with non-standard VR types in file meta information. The vulnerability leads to vast memory allocations and resource depletion, triggering a denial-of-service condition. A maliciously crafted file can fill the heap in a single read operation without properly releasing it.

When storing unbounded types in a BTreeMap, a node is represented as a linked list of "memory chunks". It was discovered recently that when we deallocate a node, in some cases only the first memory chunk is deallocated, and the rest of the memory chunks remain (incorrectly) allocated, causing a memory leak. In the worst case, depending on how a canister uses the BTreeMap, an adversary could interact with the canister through its API and trigger interactions with the map that keep consuming memory due to the memory leak. This could potentially lead to using an excessive amount of memory, or even running out of memory. This issue has been fixed in #212 https://github.com/dfinity/stable-structures/pull/212  by changing the logic for deallocating nodes to ensure that all of a node's memory chunks are deallocated and users are asked to upgrade to version 0.6.4.. Tests have been added to prevent regressions of this nature moving forward. Note: Users of stable-structure < 0.6.0 are not affected. Users who are not storing unbounded types in BTreeMap are not affected and do not need to upgrade. Otherwise, an upgrade to version 0.6.4 is necessary.

llama.cpp provides LLM inference in C/C++. The unsafe `type` member in the `rpc_tensor` structure can cause `global-buffer-overflow`. This vulnerability may lead to memory data leakage. The vulnerability is fixed in b3561.

Denial of service while processing RTCP packets containing multiple SDES reports due to memory for last SDES packet is freed and rest of the memory is leaked in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Wearables