An exploitable local privilege elevation vulnerability exists in the file system permissions of Advantech WebAccess/SCADA 9.0.1 installation. In COM Server Application Privilege Escalation, an attacker can either replace binary or loaded modules to execute code with NT SYSTEM privilege.
Advantech WebAccess 8.3.1 and earlier has an improper privilege management vulnerability, which may allow an attacker to access those files and perform actions at a system administrator level.
WebAccess Versions 8.3.2 and prior. During installation, the application installer disables user access control and does not re-enable it after the installation is complete. This could allow an attacker to run elevated arbitrary code.
Stack-based buffer overflow in Advantech WebAccess, formerly BroadWin WebAccess, before 8.0 allows remote attackers to execute arbitrary code via a crafted ip_address parameter in an HTML document.
An exploitable local privilege elevation vulnerability exists in the file system permissions of Advantech WebAccess/SCADA 9.0.1 installation. In webvrpcs Run Key Privilege Escalation in installation folder of WebAccess, an attacker can either replace binary or loaded modules to execute code with NT SYSTEM privilege.
A privilege escalation vulnerability exists in the Windows version of installation for Advantech R-SeeNet Advantech R-SeeNet 2.4.15 (30.07.2021). A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.
A privilege escalation vulnerability exists in the Windows version of installation for Advantech R-SeeNet Advantech R-SeeNet 2.4.15 (30.07.2021). A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.
A privilege escalation vulnerability exists in the Windows version of installation for Advantech R-SeeNet Advantech R-SeeNet 2.4.15 (30.07.2021). A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.
A privilege escalation vulnerability exists in the installation of Advantech DeviceOn/iService 1.1.7. A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.
A privilege escalation vulnerability exists in Advantech SQ Manager Server 1.0.6. A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.
A privilege escalation vulnerability exists in the installation of Advantech DeviceOn/iEdge Server 1.0.2. A specially-crafted file can be replaced in the system to escalate privileges to NT SYSTEM authority. An attacker can provide a malicious file to trigger this vulnerability.
This vulnerability could allow an attacker to disclose information and execute arbitrary code on affected installations of WebAccess/MHI Designer
An exploitable local privilege elevation vulnerability exists in the file system permissions of Advantech WebAccess/SCADA 9.0.1 installation. In webvrpcs Run Key Privilege Escalation in installation folder of WebAccess, an attacker can either replace binary or loaded modules to execute code with NT SYSTEM privilege.
An exploitable local privilege elevation vulnerability exists in the file system permissions of Advantech WebAccess/SCADA 9.0.1 installation. In privilege escalation via PostgreSQL executable, an attacker can either replace binary or loaded modules to execute code with NT SYSTEM privilege.
An exploitable local privilege elevation vulnerability exists in the file system permissions of Advantech WebAccess/SCADA 9.0.1 installation. In privilege escalation via multiple service executables in installation folder of WebAccess, an attacker can either replace binary or loaded modules to execute code with NT SYSTEM privilege.
An issue was discovered in Advantech SUISAccess Server Version 3.0 and prior. The admin password is stored in the system and is encrypted with a static key hard-coded in the program. Attackers could reverse the admin account password for use.
Incorrect permissions are set to default on the ‘Project Management’ page of WebAccess/SCADA portal of WebAccess/SCADA Versions 9.0.1 and prior, which may allow a low-privileged user to update an administrator’s password and login as an administrator to escalate privileges on the system.
An Incorrect Permission Assignment for Critical Resource issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. Multiple files and folders with ACLs that affect other users are allowed to be modified by non-administrator accounts.
An elevation of privilege vulnerability exists when NTFS improperly checks access, aka "NTFS Elevation of Privilege Vulnerability." This affects Windows 7, Windows Server 2012 R2, Windows RT 8.1, Windows Server 2008, Windows Server 2019, Windows Server 2012, Windows 8.1, Windows Server 2016, Windows Server 2008 R2, Windows 10, Windows 10 Servers.
Dell ThinOS 10, versions prior to 2508_10.0127, contains an Incorrect Permission Assignment for Critical Resource vulnerability. A local low-privileged attacker could potentially exploit this vulnerability leading to Elevation of Privileges and Unauthorized Access.
Multiple Zoho ManageEngine products suffer from local privilege escalation due to improper permissions for the %SYSTEMDRIVE%\ManageEngine directory and its sub-folders. Moreover, the services associated with said products try to execute binaries such as sc.exe from the current directory upon system start. This will effectively allow non-privileged users to escalate privileges to NT AUTHORITY\SYSTEM. This affects Desktop Central 10.0.380, EventLog Analyzer 12.0.2, ServiceDesk Plus 10.0.0, SupportCenter Plus 8.1, O365 Manager Plus 4.0, Mobile Device Manager Plus 9.0.0, Patch Connect Plus 9.0.0, Vulnerability Manager Plus 9.0.0, Patch Manager Plus 9.0.0, OpManager 12.3, NetFlow Analyzer 11.0, OpUtils 11.0, Network Configuration Manager 11.0, FireWall 12.0, Key Manager Plus 5.6, Password Manager Pro 9.9, Analytics Plus 1.0, and Browser Security Plus.
Adobe Photoshop Elements 8.0 installs the Adobe Active File Monitor V8 service with an insecure security descriptor, which allows local users to (1) stop the service via the stop command, (2) execute arbitrary commands as SYSTEM by using the config command to modify the binPath variable, or (3) restart the service via the start command.
TrustPort Antivirus before 2.8.0.2266 and PC Security before 2.0.0.1291 use weak permissions (Everyone: Full Control) for files under %PROGRAMFILES%, which allows local users to gain privileges by replacing executables with Trojan horse programs.
A vulnerability in the privilege management functionality of all Cisco BroadWorks server types could allow an authenticated, local attacker to elevate privileges to root on an affected system. This vulnerability is due to incorrect implementation of user role permissions. An attacker could exploit this vulnerability by authenticating to the application as a user with the BWORKS or BWSUPERADMIN role and issuing crafted commands on an affected system. A successful exploit could allow the attacker to execute commands beyond the sphere of their intended access level, including initiating installs or running operating system commands with elevated permissions. There are workarounds that address this vulnerability.
RoboDK versions 5.5.3 and prior contain an insecure permission assignment to critical directories vulnerability, which could allow a local user to escalate privileges and write files to the RoboDK process and achieve code execution.
The svpn and policyserver components of the F5 BIG-IP APM client prior to version 7.1.7.1 for Linux and macOS runs as a privileged process and can allow an unprivileged user to get ownership of files owned by root on the local client host. A malicious local unprivileged user may gain knowledge of sensitive information, manipulate certain data, or assume super-user privileges on the local client host.
dp-golang is a Puppet module for Go installations. Prior to 1.2.7, dp-golang could install files — including the compiler binary — with the wrong ownership when Puppet was run as root and the installed package was On macOS: Go version 1.4.3 through 1.21rc3, inclusive, go1.4-bootstrap-20170518.tar.gz, or go1.4-bootstrap-20170531.tar.gz. The user and group specified in Puppet code were ignored for files within the archive. dp-puppet version 1.2.7 will recreate installations if the owner or group of any file or directory within that installation does not match the requested owner or group
The g_file_copy function in glib 2.0 sets the permissions of a target file to the permissions of a symbolic link (777), which allows user-assisted local users to modify files of other users, as demonstrated by using Nautilus to modify the permissions of the user home directory.
An exploitable local privilege elevation vulnerability exists in the file system permissions of GOG Galaxy's “Games” directory, version 1.2.48.36 (Windows 64-bit Installer). An attacker can overwrite executables of installed games to exploit this vulnerability and execute arbitrary code with elevated privileges.
In Delta Electronics InfraSuite Device Master versions prior to 1.0.5, an attacker could set incorrect directory permissions, which could result in local privilege escalation.
An exploitable local privilege escalation vulnerability exists in the privileged helper tool of GOG Galaxy's Games, version 1.2.47 for macOS. An attacker can globally adjust folder permissions leading to execution of arbitrary code with elevated privileges.
An exploitable local privilege elevation vulnerability exists in the file system permissions of GOG Galaxy's install directory. An attacker can overwrite an executable that is launched as a system service on boot by default to exploit this vulnerability and execute arbitrary code with system privileges.
Incorrect permission assignment for critical resource exists in CONPROSYS HMI System (CHS) versions prior to 3.5.3. ACL (Access Control List) is not appropriately set to the local folder where the affected product is installed, therefore a wide range of privileges is permitted to a user of the PC where the affected product is installed. As a result, the user may be able to destroy the system and/or execute a malicious program.
Insecure inherited permissions in some Intel(R) HID Event Filter software installers before version 2.2.2.1 may allow an authenticated user to potentially enable escalation of privilege via local access.
vRealize Operations (7.x before 7.0.0.11287810, 6.7.x before 6.7.0.11286837 and 6.6.x before 6.6.1.11286876) contains a local privilege escalation vulnerability due to improper permissions of support scripts. Admin user of the vROps application with shell access may exploit this issue to elevate the privileges to root on a vROps machine. Note: the admin user (non-sudoer) should not be confused with root of the vROps machine.
The Canon TR150 print driver through 3.71.2.10 is vulnerable to a privilege escalation issue. During the add printer process, a local attacker can overwrite CNMurGE.dll and, if timed properly, the overwritten DLL will be loaded into a SYSTEM process resulting in escalation of privileges. This occurs because the driver drops a world-writable DLL into a CanonBJ %PROGRAMDATA% location that gets loaded by printisolationhost (a system process).
Insecure inherited permissions in some Flexlm License Daemons for Intel(R) FPGA software before version v11.19.5.0 may allow an authenticated user to potentially enable escalation of privilege via local access.
A vulnerability allows local attackers to escalate privilege on Rapid Scada 5.5.0 because of weak C:\SCADA permissions. The specific flaw exists within the access control that is set and modified during the installation of the product. The product sets weak access control restrictions. An attacker can leverage this vulnerability to execute arbitrary code under the context of Administrator, the IUSR account, or SYSTEM.
Insecure permissions in the packaging of tomcat allow local users that win a race during package installation to escalate to root
In Rapid Software LLC's Rapid SCADA versions prior to Version 5.8.4, an authorized user can write directly to the Scada directory. This may allow privilege escalation.
Insecure inherited permissions in some Intel(R) XTU software before version 7.14.0.15 may allow an authenticated user to potentially enable escalation of privilege via local access.
Insecure inherited permissions for the Intel(R) NUC Pro Software Suite before version 2.0.0.3 may allow an authenticated user to potentially enable escalation of privilege via local access.
Improper permissions in the installer for the ITE Tech* Consumer Infrared Driver for Windows 10 versions before 5.4.3.0 may allow an authenticated user to potentially enable escalation of privilege via local access.
The MacOS version of Multipass, version 1.7.0, fixed in 1.7.2, accidentally installed the application directory with incorrect owner.
Hypervisor-Protected Code Integrity (HVCI) Security Feature Bypass Vulnerability
Docker Desktop before 3.6.0 suffers from incorrect access control. If a low-privileged account is able to access the server running the Windows containers, it can lead to a full container compromise in both process isolation and Hyper-V isolation modes. This security issue leads an attacker with low privilege to read, write and possibly even execute code inside the containers.
A code injection vulnerability in the Debian package component of Taegis Endpoint Agent (Linux) versions older than 1.3.10 allows local users arbitrary code execution as root. Redhat-based systems using RPM packages are not affected.
Insecure Permissions vulnerability in PDQ Smart Deploy V.3.0.2040 allows a local attacker to execute arbtirary code via the \HKLM\SYSTEM\Setup\SmartDeploy component
IBM WebSphere MQ 8.0.0.0 through 8.0.0.9 and 9.0.0.0 through 9.1.1 could allow a local non privileged user to execute code as an administrator due to incorrect permissions set on MQ installation directories. IBM X-Force ID: 157190.
A local low-level user on the server machine with credentials to the running OAS services can create and execute a report with an rdlx file on the server system itself. Any code within the rdlx file of the report executes with SYSTEM privileges, resulting in privilege escalation.