PowerDNS Authoritative Server 3.3.0 up to 4.1.4 excluding 4.1.5 and 4.0.6, and PowerDNS Recursor 3.2 up to 4.1.4 excluding 4.1.5 and 4.0.9, are vulnerable to a memory leak while parsing malformed records that can lead to remote denial of service.
LiteCart before 2.1.2 allows remote attackers to cause a denial of service (memory consumption) via URIs that do not exist, because public_html/logs/not_found.log grows without bound, and is loaded into memory for each request.
Hawk is an HTTP authentication scheme providing mechanisms for making authenticated HTTP requests with partial cryptographic verification of the request and response, covering the HTTP method, request URI, host, and optionally the request payload. Hawk used a regular expression to parse `Host` HTTP header (`Hawk.utils.parseHost()`), which was subject to regular expression DoS attack - meaning each added character in the attacker's input increases the computation time exponentially. `parseHost()` was patched in `9.0.1` to use built-in `URL` class to parse hostname instead. `Hawk.authenticate()` accepts `options` argument. If that contains `host` and `port`, those would be used instead of a call to `utils.parseHost()`.
Argo Events is an event-driven workflow automation framework for Kubernetes. Prior to version 1.7.1, several `HandleRoute` endpoints make use of the deprecated `ioutil.ReadAll()`. `ioutil.ReadAll()` reads all the data into memory. As such, an attacker who sends a large request to the Argo Events server will be able to crash it and cause denial of service. A patch for this vulnerability has been released in Argo Events version 1.7.1.
A vulnerability was found in Braces versions prior to 2.3.1. Affected versions of this package are vulnerable to Regular Expression Denial of Service (ReDoS) attacks.
erlang-jose (aka JOSE for Erlang and Elixir) through 1.11.6 allow attackers to cause a denial of service (CPU consumption) via a large p2c (aka PBES2 Count) value in a JOSE header.
On Juniper Networks MX Series and EX9200 Series platforms with Trio-based MPC (Modular Port Concentrator) where Integrated Routing and Bridging (IRB) interface is configured and it is mapped to a VPLS instance or a Bridge-Domain, certain network events at Customer Edge (CE) device may cause memory leak in the MPC which can cause an out of memory and MPC restarts. When this issue occurs, there will be temporary traffic interruption until the MPC is restored. An administrator can use the following CLI command to monitor the status of memory usage level of the MPC: user@device> show system resource-monitor fpc FPC Resource Usage Summary Free Heap Mem Watermark : 20 % Free NH Mem Watermark : 20 % Free Filter Mem Watermark : 20 % * - Watermark reached Slot # % Heap Free RTT Average RTT 1 87 PFE # % ENCAP mem Free % NH mem Free % FW mem Free 0 NA 88 99 1 NA 89 99 When the issue is occurring, the value of “% NH mem Free” will go down until the MPC restarts. This issue affects MX Series and EX9200 Series with Trio-based PFEs (Packet Forwarding Engines). Please refer to https://kb.juniper.net/KB25385 for the list of Trio-based PFEs. This issue affects Juniper Networks Junos OS on MX Series, EX9200 Series: 17.3R3-S8; 17.4R3-S2; 18.2R3-S4, 18.2R3-S5; 18.3R3-S2, 18.3R3-S3; 18.4 versions starting from 18.4R3-S1 and later versions prior to 18.4R3-S6; 19.2 versions starting from 19.2R2 and later versions prior to 19.2R3-S1; 19.4 versions starting from 19.4R2 and later versions prior to 19.4R2-S3, 19.4R3; 20.2 versions starting from 20.2R1 and later versions prior to 20.2R1-S3, 20.2R2. This issue does not affect Juniper Networks Junos OS: 18.1, 19.1, 19.3, 20.1.
On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5, 14.1.x versions prior to 14.1.4.6, and 13.1.x versions prior to 13.1.5, when a Real Time Streaming Protocol (RTSP) profile is configured on a virtual server, undisclosed traffic can cause an increase in Traffic Management Microkernel (TMM) resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
It was discovered that the is-my-json-valid JavaScript library used an inefficient regular expression to validate JSON fields defined to have email format. A specially crafted JSON file could cause it to consume an excessive amount of CPU time when validated.
On F5 BIG-IP 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, when multiple route domains are configured, undisclosed requests to big3d can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
Envoy is a cloud-native high-performance proxy. In versions prior to 1.22.1 secompressors accumulate decompressed data into an intermediate buffer before overwriting the body in the decode/encodeBody. This may allow an attacker to zip bomb the decompressor by sending a small highly compressed payload. Maliciously constructed zip files may exhaust system memory and cause a denial of service. Users are advised to upgrade. Users unable to upgrade may consider disabling decompression.
Memcached version 1.5.5 contains an Insufficient Control of Network Message Volume (Network Amplification, CWE-406) vulnerability in the UDP support of the memcached server that can result in denial of service via network flood (traffic amplification of 1:50,000 has been reported by reliable sources). This attack appear to be exploitable via network connectivity to port 11211 UDP. This vulnerability appears to have been fixed in 1.5.6 due to the disabling of the UDP protocol by default.
On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, when the stream profile is configured on a virtual server, undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
aaugustin websockets version 4 contains a CWE-409: Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in Servers and clients, unless configured with compression=None that can result in Denial of Service by memory exhaustion. This attack appear to be exploitable via Sending a specially crafted frame on an established connection. This vulnerability appears to have been fixed in 5.
Bitcoin SV before 0.1.1 allows uncontrolled resource consumption when deserializing transactions.
The Multipass service was found to have code paths that could be abused to cause a denial of service for authentication or authorization operations. A malicious attacker could perform an application-level denial of service attack, potentially causing authentication and/or authorization operations to fail for the duration of the attack. This could lead to performance degradation or login failures for customer Palantir Foundry environments. This vulnerability is resolved in Multipass 3.647.0. This issue affects: Palantir Foundry Multipass versions prior to 3.647.0.
CNCF Envoy through 1.13.0 may consume excessive amounts of memory when responding internally to pipelined requests.
In JetBrains Toolbox App before 2.2 a DoS attack was possible via a malicious SVG image
Apache ATS 6.0.0 to 6.2.3, 7.0.0 to 7.1.9, and 8.0.0 to 8.0.6 is vulnerable to a HTTP/2 slow read attack.
The vCenter Server contains a denial-of-service vulnerability in the content library service. A malicious actor with network access to port 443 on vCenter Server may exploit this issue to trigger a denial-of-service condition by sending a specially crafted header.
libvirt version before 4.2.0-rc1 is vulnerable to a resource exhaustion as a result of an incomplete fix for CVE-2018-5748 that affects QEMU monitor but now also triggered via QEMU guest agent.
LogMeIn LastPass through 4.15.0 allows remote attackers to cause a denial of service (browser hang) via an HTML document because the resource consumption of onloadwff.js grows with the number of INPUT elements.
A vulnerability of Uncontrolled Resource Consumption has been identified in STARDOM provided by Yokogawa Electric Corporation. This vulnerability may allow to a remote attacker to cause a denial-of-service condition to the FCN/FCJ controller by sending a crafted packet. While sending the packet, the maintenance homepage of the controller could not be accessed. Therefore, functions of the maintenance homepage, changing configuration, viewing logs, etc. are not available. But the controller’s operation is not stopped by the condition. The affected products and versions are as follows: STARDOM FCN/FCJ R1.01 to R4.31.
In Moxa NPort 5210, 5230, and 5232 versions 2.9 build 17030709 and prior, the amount of resources requested by a malicious actor are not restricted, allowing for a denial-of-service condition.
libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.
OPC UA Legacy Java Stack 2022-04-01 allows a remote attacker to cause a server to stop processing messages by sending crafted messages that exhaust available resources.
Memory leak in the ReadPSDLayers function in coders/psd.c in ImageMagick 6.8.9.9 allows remote attackers to cause a denial of service (memory consumption) via unspecified vectors.
OPC UA .NET Standard Stack 1.04.368 allows a remote attacker to cause a server to crash via a large number of messages that trigger Uncontrolled Resource Consumption.
Martem TELEM GW6 and GWM devices with firmware 2018.04.18-linux_4-01-601cb47 and prior allow the creation of new connections to one or more IOAs, without closing them properly, which may cause a denial of service within the industrial process control channel.
A wrong check in Nextcloud Server 19 and prior allowed to perform a denial of service attack when resetting the password for a user.
Bitcoin SV before 0.1.1 allows uncontrolled resource consumption when receiving sendheaders messages.
Sympa 6.2.38 through 6.2.52 allows remote attackers to cause a denial of service (disk consumption from temporary files, and a flood of notifications to listmasters) via a series of requests with malformed parameters.
Bitcoin SV before 0.1.1 allows uncontrolled resource consumption when receiving messages with invalid checksums.
An issue was discovered in iPortalis iCS 7.1.13.0. Attackers can send a sequence of requests to rapidly cause .NET Input Validation errors. This increases the size of the log file on the remote server until memory is exhausted, therefore consuming the maximum amount of resources (triggering a denial of service condition).
In CmpBlkDrvTcp of CODESYS V3 in multiple versions an uncontrolled ressource consumption allows an unauthorized attacker to block new TCP connections. Existing connections are not affected.
A vulnerability in IPv6 ingress packet processing for Cisco UCS Central Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high CPU utilization on the targeted device. The vulnerability is due to insufficient rate limiting protection for IPv6 ingress traffic. An attacker could exploit this vulnerability by sending the affected device a high rate of IPv6 packets. Successful exploitation could allow the attacker to cause a DoS condition due to CPU and resource constraints. Cisco Bug IDs: CSCuv34544.
Envoy version 1.14.2, 1.13.2, 1.12.4 or earlier may exhaust file descriptors and/or memory when accepting too many connections.
lestrrat-go/jwx is a Go module implementing various JWx (JWA/JWE/JWK/JWS/JWT, otherwise known as JOSE) technologies. A p2c parameter set too high in JWE's algorithm PBES2-* could lead to a denial of service. The JWE key management algorithms based on PBKDF2 require a JOSE Header Parameter called p2c (PBES2 Count). This parameter dictates the number of PBKDF2 iterations needed to derive a CEK wrapping key. Its primary purpose is to intentionally slow down the key derivation function, making password brute-force and dictionary attacks more resource- intensive. Therefore, if an attacker sets the p2c parameter in JWE to a very large number, it can cause a lot of computational consumption, resulting in a denial of service. This vulnerability has been addressed in commit `64f2a229b` which has been included in release version 1.2.27 and 2.0.18. Users are advised to upgrade. There are no known workarounds for this vulnerability.
In CmpChannelServer of CODESYS V3 in multiple versions an uncontrolled ressource consumption allows an unauthorized attacker to block new communication channel connections. Existing connections are not affected.
A vulnerability in the application server of the Cisco Unified Customer Voice Portal (CVP) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to malformed SIP INVITE traffic received on the CVP during communications with the Cisco Virtualized Voice Browser (VVB). An attacker could exploit this vulnerability by sending malformed SIP INVITE traffic to the targeted appliance. An exploit could allow the attacker to impact the availability of services and data on the device, causing a DoS condition. This vulnerability affects Cisco Unified CVP running any software release prior to 11.6(1). Cisco Bug IDs: CSCve85840.
A vulnerability in management interface access control list (ACL) configuration of Cisco NX-OS System Software could allow an unauthenticated, remote attacker to bypass configured ACLs on the management interface. This could allow traffic to be forwarded to the NX-OS CPU for processing, leading to high CPU utilization and a denial of service (DoS) condition. The vulnerability is due to a bad code fix in the 7.3.2 code train that could allow traffic to the management interface to be misclassified and not match the proper configured ACLs. An attacker could exploit this vulnerability by sending crafted traffic to the management interface. An exploit could allow the attacker to bypass the configured management interface ACLs and impact the CPU of the targeted device, resulting in a DoS condition. This vulnerability affects the following Cisco products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvf31132.
Lexiglot through 2014-11-20 allows denial of service because api/update.php launches svn update operations that use a great deal of resources.
The Security Team noticed that the termination condition of the for loop in the readExternal method is a controllable variable, which, if tampered with, may lead to CPU exhaustion. As a fix, we added an upper bound and termination condition in the read and write logic. We classify it as a "low-priority but useful improvement". SystemDS is a distributed system and needs to serialize/deserialize data but in many code paths (e.g., on Spark broadcast/shuffle or writing to sequence files) the byte stream is anyway protected by additional CRC fingerprints. In this particular case though, the number of decoders is upper-bounded by twice the number of columns, which means an attacker would need to modify two entries in the byte stream in a consistent manner. By adding these checks robustness was strictly improved with almost zero overhead. These code changes are available in versions higher than 2.2.1.
Prototype pollution in json-bigint npm package < 1.0.0 may lead to a denial-of-service (DoS) attack.
Citrix ADC and Citrix Gateway 13.0 before 13.0-64.35, Citrix ADC and NetScaler Gateway 12.1 before 12.1-58.15, Citrix ADC 12.1-FIPS before 12.1-55.187, Citrix ADC and NetScaler Gateway 12.0, Citrix ADC and NetScaler Gateway 11.1 before 11.1-65.12, Citrix SD-WAN WANOP 11.2 before 11.2.1a, Citrix SD-WAN WANOP 11.1 before 11.1.2a, Citrix SD-WAN WANOP 11.0 before 11.0.3f, Citrix SD-WAN WANOP 10.2 before 10.2.7b are vulnerable to a denial of service attack originating from the management network.
A Node.js application that allows an attacker to trigger a DNS request for a host of their choice could trigger a Denial of Service in versions < 15.2.1, < 14.15.1, and < 12.19.1 by getting the application to resolve a DNS record with a larger number of responses. This is fixed in 15.2.1, 14.15.1, and 12.19.1.
A vulnerability in the Routing Protocols Daemon (RPD) with Juniper Extension Toolkit (JET) support can allow a network based unauthenticated attacker to cause a severe memory exhaustion condition on the device. This can have an adverse impact on the system performance and availability. This issue only affects devices with JET support running Junos OS 17.2R1 and subsequent releases. Other versions of Junos OS are unaffected by this vulnerability. Affected releases are Juniper Networks Junos OS: 17.2 versions prior to 17.2R1-S7, 17.2R2-S6, 17.2R3; 17.2X75 versions prior to 17.2X75-D102, 17.2X75-D110; 17.3 versions prior to 17.3R2-S4, 17.3R3; 17.4 versions prior to 17.4R1-S5, 17.4R2; 18.1 versions prior to 18.1R2-S3, 18.1R3;
Receipt of a specific MPLS packet may cause MPC7/8/9, PTX-FPC3 (FPC-P1, FPC-P2) line cards or PTX1K to crash and restart. By continuously sending specific MPLS packets, an attacker can repeatedly crash the line cards or PTX1K causing a sustained Denial of Service. Affected releases are Juniper Networks Junos OS with MPC7/8/9 or PTX-FPC3 (FPC-P1, FPC-P2) installed and PTX1K: 15.1F versions prior to 15.1F6-S10; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 16.1 versions prior to 16.1R3-S8, 16.1R4-S9, 16.1R5-S4, 16.1R6-S3, 16.1R7; 16.1X65 versions prior to 16.1X65-D46; 16.2 versions prior to 16.2R1-S6, 16.2R2-S5, 16.2R3; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S4, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D70, 17.2X75-D90; 17.3 versions prior to 17.3R1-S4, 17.3R2, 17.4 versions prior to 17.4R1-S2, 17.4R2. Refer to KB25385 for more information about PFE line cards.
A denial of service vulnerability in the telnetd service on Junos OS allows remote unauthenticated users to cause high CPU usage which may affect system performance. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D81 on SRX Series; 12.3 versions prior to 12.3R12-S11; 12.3X48 versions prior to 12.3X48-D80 on SRX Series; 15.1 versions prior to 15.1R7; 15.1X49 versions prior to 15.1X49-D150, 15.1X49-D160 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D68 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D235 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D495 on NFX Series; 16.1 versions prior to 16.1R4-S12, 16.1R6-S6, 16.1R7; 16.2 versions prior to 16.2R2-S7, 16.2R3; 17.1 versions prior to 17.1R2-S9, 17.1R3; 17.2 versions prior to 17.2R2-S6, 17.2R3; 17.2X75 versions prior to 17.2X75-D100; 17.3 versions prior to 17.3R2-S4, 17.3R3; 17.4 versions prior to 17.4R1-S5, 17.4R2; 18.2X75 versions prior to 18.2X75-D5.
The package ua-parser-js before 0.7.22 are vulnerable to Regular Expression Denial of Service (ReDoS) via the regex for Redmi Phones and Mi Pad Tablets UA.