An issue was discovered in slicer69 doas before 6.2 on certain platforms other than OpenBSD. On platforms without strtonum(3), sscanf was used without checking for error cases. Instead, the uninitialized variable errstr was checked and in some cases returned success even if sscanf failed. The result was that, instead of reporting that the supplied username or group name did not exist, it would execute the command as root.

This vulnerability exists in Milesight 4K/H.265 Series NVR models (MS-Nxxxx-xxG, MS-Nxxxx-xxE, MS-Nxxxx-xxT, MS-Nxxxx-xxH and MS-Nxxxx-xxC), due to improper authorization at the Milesight NVR web-based management interface. A remote attacker could exploit this vulnerability by sending a specially crafted http requests on the targeted device. Successful exploitation of this vulnerability could allow remote attacker to perform unauthorized activities on the targeted device.

Incorrect Authorization vulnerability in Apache Software Foundation Apache IoTDB.This issue affects the iotdb-web-workbench component on 0.13.3. iotdb-web-workbench is an optional component of IoTDB, providing a web console of the database. This problem is fixed from version 0.13.4 of iotdb-web-workbench onwards.

Improper access control in Calibre 6.9.0 ~ 7.14.0 allow unauthenticated attackers to achieve remote code execution.

An issue in Zimbra Collaboration (ZCS) v.8.8.15 and v.9.0 allows a remote attacker to escalate privileges and obtain sensitive information via the password and 2FA parameters.

Incorrect authorization in OMICRON StationGuard 1.10 through 2.20 and StationScout 1.30 through 2.20 allows an attacker to bypass intended access restrictions.

A flaw was found in ghostscript, versions 9.x before 9.50, in the setsystemparams procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.

Improper authentication vulnerability in T&D Corporation and ESPEC MIC CORP. data logger products allows a remote unauthenticated attacker to login to the product as a registered user. Affected products and versions are as follows: T&D Corporation data logger products (TR-71W/72W all firmware versions, RTR-5W all firmware versions, WDR-7 all firmware versions, WDR-3 all firmware versions, and WS-2 all firmware versions), and ESPEC MIC CORP. data logger products (RT-12N/RS-12N all firmware versions, RT-22BN all firmware versions, and TEU-12N all firmware versions).

An authentication bypass vulnerability in the Password Reset component of Gladinet CentreStack before 13.5.9808 allows remote attackers to set a new password for any valid user account, without needing the previous known password, resulting in a full authentication bypass.

An issue has been discovered in GitLab EE affecting all versions starting from 13.12 before 16.2.7, all versions starting from 16.3 before 16.3.4. It was possible for an attacker to run pipeline jobs as an arbitrary user via scheduled security scan policies. This was a bypass of [CVE-2023-3932](https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2023-3932) showing additional impact.

After Automation Direct CLICK PLC CPU Modules: C0-1x CPUs with firmware prior to v3.00 is unlocked by an authorized user, the unlocked state does not timeout. If the programming software is interrupted, the PLC remains unlocked. All subsequent programming connections are allowed without authorization. The PLC is only relocked by a power cycle, or when the programming software disconnects correctly.

Authentication Bypass vulnerability in D-Link DIR-885L FW102b01 allows remote attackers to gain escalated privileges via phpcgi. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Dompdf is an HTML to PDF converter. The URI validation on dompdf 2.0.1 can be bypassed on SVG parsing by passing `<image>` tags with uppercase letters. This may lead to arbitrary object unserialize on PHP < 8, through the `phar` URL wrapper. An attacker can exploit the vulnerability to call arbitrary URL with arbitrary protocols, if they can provide a SVG file to dompdf. In PHP versions before 8.0.0, it leads to arbitrary unserialize, that will lead to the very least to an arbitrary file deletion and even remote code execution, depending on classes that are available.

TOTOLINK A720R V4.1.5cu.532_ B20210610 is vulnerable to Incorrect Access Control.

All versions of Confluence Data Center and Server are affected by this unexploited vulnerability. This Improper Authorization vulnerability allows an unauthenticated attacker to reset Confluence and create a Confluence instance administrator account. Using this account, an attacker can then perform all administrative actions that are available to Confluence instance administrator leading to - but not limited to - full loss of confidentiality, integrity and availability.  Atlassian Cloud sites are not affected by this vulnerability. If your Confluence site is accessed via an atlassian.net domain, it is hosted by Atlassian and is not vulnerable to this issue.

On NXP Kinetis KV1x, Kinetis KV3x, and Kinetis K8x devices, Flash Access Controls (FAC) (a software IP protection method for execute-only access) can be defeated by observing CPU registers and the effect of code/instruction execution.

KubeOperator is an open source Kubernetes distribution focused on helping enterprises plan, deploy and operate production-level K8s clusters. In KubeOperator versions 3.16.3 and below, API interfaces with unauthorized entities and can leak sensitive information. This vulnerability could be used to take over the cluster under certain conditions. This issue has been patched in version 3.16.4.

On STMicroelectronics STM32L0, STM32L1, STM32L4, STM32F4, STM32F7, and STM32H7 devices, Proprietary Code Read Out Protection (PCROP) (a software IP protection method) can be defeated by observing CPU registers and the effect of code/instruction execution.

In Webgalamb through 7.0, system/ajax.php functionality is supposed to be available only to the administrator. However, by using one of the bgsend, atment_sddd1xGz, or xls_bgimport query parameters, most of these methods become available to unauthenticated users.

The REST API component of TIBCO Software Inc.'s TIBCO JasperReports Server, TIBCO JasperReports Server Community Edition, TIBCO JasperReports Server for ActiveMatrix BPM, TIBCO Jaspersoft for AWS with Multi-Tenancy, and TIBCO Jaspersoft Reporting and Analytics for AWS contains a vulnerability that theoretically allows unauthenticated users to bypass authorization checks for portions of the HTTP interface to the JasperReports Server. Affected releases are TIBCO Software Inc.'s TIBCO JasperReports Server: 6.4.0; 6.4.1; 6.4.2; 6.4.3; 7.1.0, TIBCO JasperReports Server Community Edition: versions up to and including 7.1.0, TIBCO JasperReports Server for ActiveMatrix BPM: versions up to and including 6.4.3, TIBCO Jaspersoft for AWS with Multi-Tenancy: versions up to and including 7.1.0, and TIBCO Jaspersoft Reporting and Analytics for AWS: versions up to and including 7.1.0.

An issue in Advanced Plugins reportsstatistics v1.3.20 and before allows a remote attacker to execute arbitrary code via the Sales Reports, Statistics, Custom Fields & Export module.

Wade Graphic Design FANTSY has a vulnerability of insufficient authorization check. An unauthenticated remote user can exploit this vulnerability by modifying URL parameters to gain administrator privileges to perform arbitrary system operation or disrupt service.

A vulnerability in the Remember Me function of Masa CMS v7.2, 7.3, and 7.4-beta allows attackers to bypass authentication via a crafted web request.

A client side rate limit issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain escalated privileges via brute force style attacks.

Teleport provides connectivity, authentication, access controls and audit for infrastructure. Community Edition versions before and including 17.5.1 are vulnerable to remote authentication bypass. At time of posting, there is no available open-source patch.

Franklin Fueling System FFS Colibri 1.9.22.8925 is affected by: File system overwrite. The impact is: File system rewrite (remote). ¶¶ An attacker can overwrite system files like [system.conf] and [passwd], this occurs because the insecure usage of "fopen" system function with the mode "wb" which allows overwriting file if exists. Overwriting files such as passwd, allows an attacker to escalate his privileges by planting backdoor user with root privilege or change root password.

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. In addition to running containers as build steps, BuildKit also provides APIs for running interactive containers based on built images. It was possible to use these APIs to ask BuildKit to run a container with elevated privileges. Normally, running such containers is only allowed if special `security.insecure` entitlement is enabled both by buildkitd configuration and allowed by the user initializing the build request. The issue has been fixed in v0.12.5 . Avoid using BuildKit frontends from untrusted sources.

An issue was discovered in LIVEBOX Collaboration vDesk before v018. Broken Access Control can occur under the /api/v1/registration/validateEmail endpoint, the /api/v1/vdeskintegration/user/adduser endpoint, and the /api/v1/registration/changePasswordUser endpoint. The web application is affected by flaws in authorization logic, through which a malicious user (with no privileges) is able to perform privilege escalation to the administrator role, and steal the accounts of any users on the system.

Zabbix Frontend provides a feature that allows admins to maintain the installation and ensure that only certain IP addresses can access it. In this way, any user will not be able to access the Zabbix Frontend while it is being maintained and possible sensitive data will be prevented from being disclosed. An attacker can bypass this protection and access the instance using IP address not listed in the defined range.

Grails Spring Security Core plugin is vulnerable to privilege escalation. The vulnerability allows an attacker access to one endpoint (i.e. the targeted endpoint) using the authorization requirements of a different endpoint (i.e. the donor endpoint). In some Grails framework applications, access to the targeted endpoint will be granted based on meeting the authorization requirements of the donor endpoint, which can result in a privilege escalation attack. This vulnerability has been patched in grails-spring-security-core versions 3.3.2, 4.0.5 and 5.1.1. Impacted Applications: Grails Spring Security Core plugin versions: 1.x 2.x >=3.0.0 <3.3.2 >=4.0.0 <4.0.5 >=5.0.0 <5.1.1 We strongly suggest that all Grails framework applications using the Grails Spring Security Core plugin be updated to a patched release of the plugin. Workarounds: Users should create a subclass extending one of the following classes from the `grails.plugin.springsecurity.web.access.intercept` package, depending on their security configuration: * `AnnotationFilterInvocationDefinition` * `InterceptUrlMapFilterInvocationDefinition` * `RequestmapFilterInvocationDefinition` In each case, the subclass should override the `calculateUri` method like so: ``` @Override protected String calculateUri(HttpServletRequest request) { UrlPathHelper.defaultInstance.getRequestUri(request) } ``` This should be considered a temporary measure, as the patched versions of grails-spring-security-core deprecates the `calculateUri` method. Once upgraded to a patched version of the plugin, this workaround is no longer needed. The workaround is especially important for version 2.x, as no patch is available version 2.x of the GSSC plugin.

The OWASP ModSecurity Core Rule Set (CRS) is affected by a partial rule set bypass by submitting a specially crafted HTTP Content-Type header field that indicates multiple character encoding schemes. A vulnerable back-end can potentially be exploited by declaring multiple Content-Type "charset" names and therefore bypassing the configurable CRS Content-Type header "charset" allow list. An encoded payload can bypass CRS detection this way and may then be decoded by the backend. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised to upgrade to 3.2.2 and 3.3.3 respectively.

The OWASP ModSecurity Core Rule Set (CRS) is affected by a partial rule set bypass for HTTP multipart requests by submitting a payload that uses a character encoding scheme via the Content-Type or the deprecated Content-Transfer-Encoding multipart MIME header fields that will not be decoded and inspected by the web application firewall engine and the rule set. The multipart payload will therefore bypass detection. A vulnerable backend that supports these encoding schemes can potentially be exploited. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised upgrade to 3.2.2 and 3.3.3 respectively. The mitigation against these vulnerabilities depends on the installation of the latest ModSecurity version (v2.9.6 / v3.0.8).

The REST/JSON project 7.x-1.x for Drupal allows node access bypass, aka SA-CONTRIB-2016-033. NOTE: This project is not covered by Drupal's security advisory policy.

The REST/JSON project 7.x-1.x for Drupal allows field access bypass, aka SA-CONTRIB-2016-033. NOTE: This project is not covered by Drupal's security advisory policy.

Incorrect Authorization vulnerability in Drupal Drupal REST & JSON API Authentication allows Forceful Browsing.This issue affects Drupal REST & JSON API Authentication: from 0.0.0 before 2.0.13.

The REST/JSON project 7.x-1.x for Drupal allows user registration bypass, aka SA-CONTRIB-2016-033. NOTE: This project is not covered by Drupal's security advisory policy.

Pebble Templates 3.1.5 allows attackers to bypass a protection mechanism and implement arbitrary code execution with springbok. NOTE: the vendor disputes this because input to the Pebble templating engine is intended to include arbitrary Java code, and thus either the input should not arrive from an untrusted source, or else the application using the engine should apply restrictions to the input. The engine is not responsible for validating the input.

The REST/JSON project 7.x-1.x for Drupal allows comment access bypass, aka SA-CONTRIB-2016-033. NOTE: This project is not covered by Drupal's security advisory policy.

An issue was discovered in Inductive Automation Ignition before 7.9.20 and 8.x before 8.1.17. Designer and Vision Client Session IDs are mishandled. An attacker can determine which session IDs were generated in the past and then hijack sessions assigned to these IDs via Randy.

Nexxt Nebula 1200-AC 15.03.06.60 allows authentication bypass and command execution by using the HTTPD service to enable TELNET.

Portainer 1.24.1 and earlier is affected by incorrect access control that may lead to remote arbitrary code execution. The restriction checks for bind mounts are applied only on the client-side and not the server-side, which can lead to spawning a container with bind mount. Once such a container is spawned, it can be leveraged to break out of the container leading to complete Docker host machine takeover.

Cacti is an open source platform which provides a robust and extensible operational monitoring and fault management framework for users. In affected versions a command injection vulnerability allows an unauthenticated user to execute arbitrary code on a server running Cacti, if a specific data source was selected for any monitored device. The vulnerability resides in the `remote_agent.php` file. This file can be accessed without authentication. This function retrieves the IP address of the client via `get_client_addr` and resolves this IP address to the corresponding hostname via `gethostbyaddr`. After this, it is verified that an entry within the `poller` table exists, where the hostname corresponds to the resolved hostname. If such an entry was found, the function returns `true` and the client is authorized. This authorization can be bypassed due to the implementation of the `get_client_addr` function. The function is defined in the file `lib/functions.php` and checks serval `$_SERVER` variables to determine the IP address of the client. The variables beginning with `HTTP_` can be arbitrarily set by an attacker. Since there is a default entry in the `poller` table with the hostname of the server running Cacti, an attacker can bypass the authentication e.g. by providing the header `Forwarded-For: <TARGETIP>`. This way the function `get_client_addr` returns the IP address of the server running Cacti. The following call to `gethostbyaddr` will resolve this IP address to the hostname of the server, which will pass the `poller` hostname check because of the default entry. After the authorization of the `remote_agent.php` file is bypassed, an attacker can trigger different actions. One of these actions is called `polldata`. The called function `poll_for_data` retrieves a few request parameters and loads the corresponding `poller_item` entries from the database. If the `action` of a `poller_item` equals `POLLER_ACTION_SCRIPT_PHP`, the function `proc_open` is used to execute a PHP script. The attacker-controlled parameter `$poller_id` is retrieved via the function `get_nfilter_request_var`, which allows arbitrary strings. This variable is later inserted into the string passed to `proc_open`, which leads to a command injection vulnerability. By e.g. providing the `poller_id=;id` the `id` command is executed. In order to reach the vulnerable call, the attacker must provide a `host_id` and `local_data_id`, where the `action` of the corresponding `poller_item` is set to `POLLER_ACTION_SCRIPT_PHP`. Both of these ids (`host_id` and `local_data_id`) can easily be bruteforced. The only requirement is that a `poller_item` with an `POLLER_ACTION_SCRIPT_PHP` action exists. This is very likely on a productive instance because this action is added by some predefined templates like `Device - Uptime` or `Device - Polling Time`. This command injection vulnerability allows an unauthenticated user to execute arbitrary commands if a `poller_item` with the `action` type `POLLER_ACTION_SCRIPT_PHP` (`2`) is configured. The authorization bypass should be prevented by not allowing an attacker to make `get_client_addr` (file `lib/functions.php`) return an arbitrary IP address. This could be done by not honoring the `HTTP_...` `$_SERVER` variables. If these should be kept for compatibility reasons it should at least be prevented to fake the IP address of the server running Cacti. This vulnerability has been addressed in both the 1.2.x and 1.3.x release branches with `1.2.23` being the first release containing the patch.

Power Distribution Units running on Powertek firmware (multiple brands) before 3.30.30 allows remote authorization bypass in the web interface. To exploit the vulnerability, an attacker must send an HTTP packet to the data retrieval interface (/cgi/get_param.cgi) with the tmpToken cookie set to an empty string followed by a semicolon. This bypasses an active session authorization check. This can be then used to fetch the values of protected sys.passwd and sys.su.name fields that contain the username and password in cleartext.

A vulnerability has been found in didi DDMQ 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the component Console Module. The manipulation with the input /;login leads to improper authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The vendor was contacted early about this disclosure but did not respond in any way.

An access control issue in Ingredient Stock Management System v1.0 allows attackers to take over user accounts via a crafted POST request to /isms/classes/Users.php.

Incorrect access control in nasapi in Buffalo TS5600D1206 version 3.61-0.10 allows attackers to bypass authentication by sending a modified HTTP Host header.

Zimbra Collaboration Open Source 8.8.15 does not encrypt the initial-login randomly created password (from the "zmprove ca" command). It is visible in cleartext on port UDP 514 (aka the syslog port). NOTE: a third party reports that this cannot be reproduced.

Apache Shiro before 1.9.1, A RegexRequestMatcher can be misconfigured to be bypassed on some servlet containers. Applications using RegExPatternMatcher with `.` in the regular expression are possibly vulnerable to an authorization bypass.

A vulnerability was found in withstars Books-Management-System 1.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file /allreaders.html of the component Background Interface. The manipulation leads to missing authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability, which was classified as critical, has been found in withstars Books-Management-System 1.0. This issue affects some unknown processing of the file /admin/article/list of the component Background Interface. The manipulation leads to missing authorization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.