KubeOperator is an open source Kubernetes distribution focused on helping enterprises plan, deploy and operate production-level K8s clusters. In KubeOperator versions 3.16.3 and below, API interfaces with unauthorized entities and can leak sensitive information. This vulnerability could be used to take over the cluster under certain conditions. This issue has been patched in version 3.16.4.

Pedro Lineu Orso chetcpasswd before 2.4 relies on the X-Forwarded-For HTTP header when verifying a client's status on an IP address ACL, which allows remote attackers to gain unauthorized access by spoofing this header.

In Delta Electronics InfraSuite Device Master versions prior to 1.0.5, an unauthenticated attacker could generate a valid token, which would lead to authentication bypass.

This vulnerability exists in Milesight 4K/H.265 Series NVR models (MS-Nxxxx-xxG, MS-Nxxxx-xxE, MS-Nxxxx-xxT, MS-Nxxxx-xxH and MS-Nxxxx-xxC), due to improper authorization at the Milesight NVR web-based management interface. A remote attacker could exploit this vulnerability by sending a specially crafted http requests on the targeted device. Successful exploitation of this vulnerability could allow remote attacker to perform unauthorized activities on the targeted device.

Sourcecodester Online Computer and Laptop Store 1.0 is vulnerable to Incorrect Access Control, which allows remote attackers to elevate privileges to the administrator's role.

In Webgalamb through 7.0, system/ajax.php functionality is supposed to be available only to the administrator. However, by using one of the bgsend, atment_sddd1xGz, or xls_bgimport query parameters, most of these methods become available to unauthenticated users.

The REST/JSON project 7.x-1.x for Drupal allows user registration bypass, aka SA-CONTRIB-2016-033. NOTE: This project is not covered by Drupal's security advisory policy.

The REST/JSON project 7.x-1.x for Drupal allows comment access bypass, aka SA-CONTRIB-2016-033. NOTE: This project is not covered by Drupal's security advisory policy.

An issue was discovered in freakchicken kafkaUI-lite 1.2.11 allows attackers on the same network to gain escalated privileges for the nodes running on it.

An authentication bypass vulnerability in the Password Reset component of Gladinet CentreStack before 13.5.9808 allows remote attackers to set a new password for any valid user account, without needing the previous known password, resulting in a full authentication bypass.

Incorrect Authorization vulnerability exists in EcoStruxure Control Expert (all versions prior to 14.1 Hot Fix), Unity Pro (all versions), Modicon M340 (all versions prior to V3.20) , and Modicon M580 (all versions prior to V3.10), which could cause a bypass of the authentication process between EcoStruxure Control Expert and the M340 and M580 controllers.

An issue discovered in Connectize AC21000 G6 641.139.1.1256 allows attackers to gain control of the device via the change password functionality as it does not prompt for the current password.

TOTOLINK A720R V4.1.5cu.532_ B20210610 is vulnerable to Incorrect Access Control.

Nexxt Nebula 1200-AC 15.03.06.60 allows authentication bypass and command execution by using the HTTPD service to enable TELNET.

A flaw was found in ghostscript, versions 9.x before 9.50, in the setsystemparams procedure where it did not properly secure its privileged calls, enabling scripts to bypass `-dSAFER` restrictions. A specially crafted PostScript file could disable security protection and then have access to the file system, or execute arbitrary commands.

A vulnerability in the Remember Me function of Masa CMS v7.2, 7.3, and 7.4-beta allows attackers to bypass authentication via a crafted web request.

IBM Jazz Foundation 7.0.2 to 7.0.2 iFix035, 7.0.3 to 7.0.3 iFix018, and 7.1.0 to 7.1.0 iFix004 could allow an unauthenticated remote attacker to update server property files that would allow them to perform unauthorized actions.

Cacti is an open source platform which provides a robust and extensible operational monitoring and fault management framework for users. In affected versions a command injection vulnerability allows an unauthenticated user to execute arbitrary code on a server running Cacti, if a specific data source was selected for any monitored device. The vulnerability resides in the `remote_agent.php` file. This file can be accessed without authentication. This function retrieves the IP address of the client via `get_client_addr` and resolves this IP address to the corresponding hostname via `gethostbyaddr`. After this, it is verified that an entry within the `poller` table exists, where the hostname corresponds to the resolved hostname. If such an entry was found, the function returns `true` and the client is authorized. This authorization can be bypassed due to the implementation of the `get_client_addr` function. The function is defined in the file `lib/functions.php` and checks serval `$_SERVER` variables to determine the IP address of the client. The variables beginning with `HTTP_` can be arbitrarily set by an attacker. Since there is a default entry in the `poller` table with the hostname of the server running Cacti, an attacker can bypass the authentication e.g. by providing the header `Forwarded-For: <TARGETIP>`. This way the function `get_client_addr` returns the IP address of the server running Cacti. The following call to `gethostbyaddr` will resolve this IP address to the hostname of the server, which will pass the `poller` hostname check because of the default entry. After the authorization of the `remote_agent.php` file is bypassed, an attacker can trigger different actions. One of these actions is called `polldata`. The called function `poll_for_data` retrieves a few request parameters and loads the corresponding `poller_item` entries from the database. If the `action` of a `poller_item` equals `POLLER_ACTION_SCRIPT_PHP`, the function `proc_open` is used to execute a PHP script. The attacker-controlled parameter `$poller_id` is retrieved via the function `get_nfilter_request_var`, which allows arbitrary strings. This variable is later inserted into the string passed to `proc_open`, which leads to a command injection vulnerability. By e.g. providing the `poller_id=;id` the `id` command is executed. In order to reach the vulnerable call, the attacker must provide a `host_id` and `local_data_id`, where the `action` of the corresponding `poller_item` is set to `POLLER_ACTION_SCRIPT_PHP`. Both of these ids (`host_id` and `local_data_id`) can easily be bruteforced. The only requirement is that a `poller_item` with an `POLLER_ACTION_SCRIPT_PHP` action exists. This is very likely on a productive instance because this action is added by some predefined templates like `Device - Uptime` or `Device - Polling Time`. This command injection vulnerability allows an unauthenticated user to execute arbitrary commands if a `poller_item` with the `action` type `POLLER_ACTION_SCRIPT_PHP` (`2`) is configured. The authorization bypass should be prevented by not allowing an attacker to make `get_client_addr` (file `lib/functions.php`) return an arbitrary IP address. This could be done by not honoring the `HTTP_...` `$_SERVER` variables. If these should be kept for compatibility reasons it should at least be prevented to fake the IP address of the server running Cacti. This vulnerability has been addressed in both the 1.2.x and 1.3.x release branches with `1.2.23` being the first release containing the patch.

OpenID Connect Issuer in LemonLDAP::NG 2.x through 2.0.5 may allow an attacker to bypass access control rules via a crafted OpenID Connect authorization request. To be vulnerable, there must exist an OIDC Relaying party within the LemonLDAP configuration with weaker access control rules than the target RP, and no filtering on redirection URIs.

An issue was discovered in slicer69 doas before 6.2 on certain platforms other than OpenBSD. On platforms without strtonum(3), sscanf was used without checking for error cases. Instead, the uninitialized variable errstr was checked and in some cases returned success even if sscanf failed. The result was that, instead of reporting that the supplied username or group name did not exist, it would execute the command as root.

In ATutor 2.2.4, an unauthenticated attacker can change the application settings and force it to use his crafted database, which allows him to gain access to the application. Next, he can change the directory that the application uploads files to, which allows him to achieve remote code execution. This occurs because install/include/header.php does not restrict certain changes (to db_host, db_login, db_password, and content_dir) within install/include/step5.php.

On STMicroelectronics STM32L0, STM32L1, STM32L4, STM32F4, STM32F7, and STM32H7 devices, Proprietary Code Read Out Protection (PCROP) (a software IP protection method) can be defeated by observing CPU registers and the effect of code/instruction execution.

On NXP Kinetis KV1x, Kinetis KV3x, and Kinetis K8x devices, Flash Access Controls (FAC) (a software IP protection method for execute-only access) can be defeated by observing CPU registers and the effect of code/instruction execution.

TCP Wrappers (tcp_wrappers) in FreeBSD 4.1.1 through 4.3 with the PARANOID ACL option enabled does not properly check the result of a reverse DNS lookup, which could allow remote attackers to bypass intended access restrictions via DNS spoofing.

Authentication Bypass vulnerability in D-Link DIR-645 firmware version 1.03 allows remote attackers to gain escalated privileges via function phpcgi_main in cgibin. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

The REST/JSON project 7.x-1.x for Drupal allows field access bypass, aka SA-CONTRIB-2016-033. NOTE: This project is not covered by Drupal's security advisory policy.

An issue was discovered in LIVEBOX Collaboration vDesk before v018. Broken Access Control can occur under the /api/v1/registration/validateEmail endpoint, the /api/v1/vdeskintegration/user/adduser endpoint, and the /api/v1/registration/changePasswordUser endpoint. The web application is affected by flaws in authorization logic, through which a malicious user (with no privileges) is able to perform privilege escalation to the administrator role, and steal the accounts of any users on the system.

Vasion Print (formerly PrinterLogic) before Virtual Appliance Host 22.0.933 Application 20.0.2368 allows Insecure Extension Installation by Trusting HTTP Permission Methods on the Server Side V-2024-005.

Zabbix Frontend provides a feature that allows admins to maintain the installation and ensure that only certain IP addresses can access it. In this way, any user will not be able to access the Zabbix Frontend while it is being maintained and possible sensitive data will be prevented from being disclosed. An attacker can bypass this protection and access the instance using IP address not listed in the defined range.

Franklin Fueling System FFS Colibri 1.9.22.8925 is affected by: File system overwrite. The impact is: File system rewrite (remote). ¶¶ An attacker can overwrite system files like [system.conf] and [passwd], this occurs because the insecure usage of "fopen" system function with the mode "wb" which allows overwriting file if exists. Overwriting files such as passwd, allows an attacker to escalate his privileges by planting backdoor user with root privilege or change root password.

Grails Spring Security Core plugin is vulnerable to privilege escalation. The vulnerability allows an attacker access to one endpoint (i.e. the targeted endpoint) using the authorization requirements of a different endpoint (i.e. the donor endpoint). In some Grails framework applications, access to the targeted endpoint will be granted based on meeting the authorization requirements of the donor endpoint, which can result in a privilege escalation attack. This vulnerability has been patched in grails-spring-security-core versions 3.3.2, 4.0.5 and 5.1.1. Impacted Applications: Grails Spring Security Core plugin versions: 1.x 2.x >=3.0.0 <3.3.2 >=4.0.0 <4.0.5 >=5.0.0 <5.1.1 We strongly suggest that all Grails framework applications using the Grails Spring Security Core plugin be updated to a patched release of the plugin. Workarounds: Users should create a subclass extending one of the following classes from the `grails.plugin.springsecurity.web.access.intercept` package, depending on their security configuration: * `AnnotationFilterInvocationDefinition` * `InterceptUrlMapFilterInvocationDefinition` * `RequestmapFilterInvocationDefinition` In each case, the subclass should override the `calculateUri` method like so: ``` @Override protected String calculateUri(HttpServletRequest request) { UrlPathHelper.defaultInstance.getRequestUri(request) } ``` This should be considered a temporary measure, as the patched versions of grails-spring-security-core deprecates the `calculateUri` method. Once upgraded to a patched version of the plugin, this workaround is no longer needed. The workaround is especially important for version 2.x, as no patch is available version 2.x of the GSSC plugin.

An issue in Advanced Plugins reportsstatistics v1.3.20 and before allows a remote attacker to execute arbitrary code via the Sales Reports, Statistics, Custom Fields & Export module.

DataEase is an open source business intelligence and data visualization tool. Prior to version 2.10.6, there is a flaw in the authentication in the io.dataease.auth.filter.TokenFilter class, which may cause the risk of unauthorized access. The vulnerability has been fixed in v2.10.6. No known workarounds are available.

In lunary-ai/lunary version v1.2.13, an incorrect authorization vulnerability exists that allows unauthorized users to access and manipulate projects within an organization they should not have access to. Specifically, the vulnerability is located in the `checkProjectAccess` method within the authorization middleware, which fails to adequately verify if a user has the correct permissions to access a specific project. Instead, it only checks if the user is part of the organization owning the project, overlooking the necessary check against the `account_project` table for explicit project access rights. This flaw enables attackers to gain complete control over all resources within a project, including the ability to create, update, read, and delete any resource, compromising the privacy and security of sensitive information.

Authentication vulnerability in MOSN v.0.23.0 allows attacker to escalate privileges via case-sensitive JWT authorization.

Deno is a runtime for JavaScript and TypeScript that uses V8 and is built in Rust. In Deno versions 1.5.0 to 1.10.1, modules that are dynamically imported through `import()` or `new Worker` might have been able to bypass network and file system permission checks when statically importing other modules. The vulnerability has been patched in Deno release 1.10.2.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions when ext-authz extension is sending request headers to the external authorization service it must merge multiple value headers according to the HTTP spec. However, only the last header value is sent. This may allow specifically crafted requests to bypass authorization. Attackers may be able to escalate privileges when using ext-authz extension or back end service that uses multiple value headers for authorization. A specifically constructed request may be delivered by an untrusted downstream peer in the presence of ext-authz extension. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes to the ext-authz extension to correctly merge multiple request header values, when sending request for authorization.

Envoy is an open source L7 proxy and communication bus designed for large modern service oriented architectures. In affected versions envoy incorrectly handled a URI '#fragment' element as part of the path element. Envoy is configured with an RBAC filter for authorization or similar mechanism with an explicit case of a final "/admin" path element, or is using a negative assertion with final path element of "/admin". The client sends request to "/app1/admin#foo". In Envoy prior to 1.18.0, or 1.18.0+ configured with path_normalization=false. Envoy treats fragment as a suffix of the query string when present, or as a suffix of the path when query string is absent, so it evaluates the final path element as "/admin#foo" and mismatches with the configured "/admin" path element. In Envoy 1.18.0+ configured with path_normalization=true. Envoy transforms this to /app1/admin%23foo and mismatches with the configured /admin prefix. The resulting URI is sent to the next server-agent with the offending "#foo" fragment which violates RFC3986 or with the nonsensical "%23foo" text appended. A specifically constructed request with URI containing '#fragment' element delivered by an untrusted client in the presence of path based request authorization resulting in escalation of Privileges when path based request authorization extensions. Envoy versions 1.19.1, 1.18.4, 1.17.4, 1.16.5 contain fixes that removes fragment from URI path in incoming requests.

A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Ventura 13.7.5, macOS Sequoia 15.4, macOS Sonoma 14.7.5. A malicious app may be able to read or write to protected files.

The OWASP ModSecurity Core Rule Set (CRS) is affected by a partial rule set bypass by submitting a specially crafted HTTP Content-Type header field that indicates multiple character encoding schemes. A vulnerable back-end can potentially be exploited by declaring multiple Content-Type "charset" names and therefore bypassing the configurable CRS Content-Type header "charset" allow list. An encoded payload can bypass CRS detection this way and may then be decoded by the backend. The legacy CRS versions 3.0.x and 3.1.x are affected, as well as the currently supported versions 3.2.1 and 3.3.2. Integrators and users are advised to upgrade to 3.2.2 and 3.3.3 respectively.

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow unauthenticated attackers access to /tmp path which contains some sensitive data (e.g. device serial number). Having those info, a possible loginId can be self-calculated in a brute force attack against BMX interface. This is usable and part of an attack chain to gain SSH root access.

vscode-restructuredtext before 146.0.0 contains an incorrect access control vulnerability, where a crafted project folder could execute arbitrary binaries via crafted workspace configuration.

In wlan AP driver, there is a possible way to inject arbitrary packet due to a missing permission check. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00413202; Issue ID: MSV-3303.

An issue was discovered on FiberHome HG6245D devices through RP2613. It is possible to bypass authentication by sending the decoded value of the GgpoZWxwCmxpc3QKd2hvCg== string to the telnet server.

BuildKit is a toolkit for converting source code to build artifacts in an efficient, expressive and repeatable manner. In addition to running containers as build steps, BuildKit also provides APIs for running interactive containers based on built images. It was possible to use these APIs to ask BuildKit to run a container with elevated privileges. Normally, running such containers is only allowed if special `security.insecure` entitlement is enabled both by buildkitd configuration and allowed by the user initializing the build request. The issue has been fixed in v0.12.5 . Avoid using BuildKit frontends from untrusted sources.

Pebble Templates 3.1.5 allows attackers to bypass a protection mechanism and implement arbitrary code execution with springbok. NOTE: the vendor disputes this because input to the Pebble templating engine is intended to include arbitrary Java code, and thus either the input should not arrive from an untrusted source, or else the application using the engine should apply restrictions to the input. The engine is not responsible for validating the input.

A vulnerability was found in SourceCodester Online Eyewear Shop 1.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file /classes/Users.php?f=save of the component User Creation Handler. The manipulation of the argument Type with the input 1 leads to improper authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

HaloITSM versions up to 2.146.1 are affected by a SAML XML Signature Wrapping (XSW) vulnerability. When having a SAML integration configured, anonymous actors could impersonate arbitrary HaloITSM users by just knowing their email address. HaloITSM versions past 2.146.1 (and patches starting from 2.143.61 ) fix the mentioned vulnerability.

This affects the package latte/latte before 2.10.6. There is a way to bypass allowFunctions that will affect the security of the application. When the template is set to allow/disallow the use of certain functions, adding control characters (x00-x08) after the function will bypass these restrictions.

oc_huff_tree_unpack in huffdec.c in libtheora in Theora through 1.0 7180717 has an invalid negative left shift. NOTE: this is disputed by third parties because there is no evidence of a security impact, e.g., an application would not crash.