Cheetahmobile CM Launcher 3D - Theme, wallpaper, Secure, Efficient, 5.0.3, 2017-09-19, Android application uses a hard-coded key for encryption. Data stored using this key can be decrypted by anyone able to access this key.

An issue was discovered on Athom Homey and Homey Pro devices before 5.0.0. ZigBee hub devices should generate a unique Standard Network Key that is then exchanged with all enrolled devices so that all inter-device communication is encrypted. However, the cited Athom products use another widely known key that is designed for testing purposes: "01030507090b0d0f00020406080a0c0d" (the decimal equivalent of 1 3 5 7 9 11 13 15 0 2 4 6 8 10 12 13), which is human generated and static across all issued devices.

DistinctDev, Inc., The Moron Test, 6.3.1, 2017-05-04, iOS application uses a hard-coded key for encryption. Data stored using this key can be decrypted by anyone able to access this key.

Moxa EDR-G903 series routers with firmware before 2.11 have a hardcoded account, which allows remote attackers to obtain unspecified device access via unknown vectors.

SonicOS Use of Hard-coded Password vulnerability in the 'dynHandleBuyToolbar' demo function.

D-Link DVX-2000MS contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values.

D-Link DVG-3104MS version 1.0.2.0.3, 1.0.2.0.4, and 1.0.2.0.4E contains hard-coded credentials for undocumented user accounts in the '/etc/passwd' file. As weak passwords have been used, the plaintext passwords can be recovered from the hash values. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

Hardcoded .htaccess Credentials for getlogs.cgi exist on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0.

A vulnerability has been identified in MXsecurity versions prior to v1.0.1. The vulnerability may put the confidentiality and integrity of SSH communications at risk on the affected device. This vulnerability is attributed to a hard-coded SSH host key, which might facilitate man-in-the-middle attacks and enable the decryption of SSH traffic.

The usage of hard-coded cryptographic keys within the ServiceAgent binary allows for the decryption of captured traffic across the network from or to the Moxa AWK-3131A firmware version 1.13.

An issue in Automatic Systems SOC FL9600 FirstLane V06 lego_T04E00 allows a remote attacker to obtain sensitive information because there is an automaticsystems super admin account with astech as its hardcoded password.

NVIDIA DGX servers, DGX-1 with BMC firmware versions prior to 3.38.30. DGX-2 with BMC firmware versions prior to 1.06.06 and all DGX A100 Servers with all BMC firmware versions, contains a vulnerability in the AMI BMC firmware in which the use of a hard-coded RSA 1024 key with weak ciphers may lead to information disclosure.

`tktchurch/website` contains the codebase for The King's Temple Church website. In version 0.1.0, a Stripe API key was found in the public code repository of the church's project. This sensitive information was unintentionally committed and subsequently exposed in the codebase. If an unauthorized party gains access to this key, they could potentially carry out transactions on behalf of the organization, leading to financial losses. Additionally, they could access sensitive customer information, leading to privacy violations and potential legal implications. The affected component is the codebase of our project, specifically the file(s) where the Stripe API key is embedded. The key should have been stored securely, and not committed to the codebase. The maintainers plan to revoke the leaked Stripe API key immediately, generate a new one, and not commit the key to the codebase.

IBM Spectrum Virtualize 8.2, 8.3, and 8.4 could allow an attacker to allow unauthorized access due to the reuse of support generated credentials. IBM X-Force ID: 212609.

In net.MCrypt in the "Diary with lock" (aka WriteDiary) application 4.72 for Android, hardcoded SecretKey and iv variables are used for the AES parameters, which makes it easier for attackers to obtain the cleartext of stored diary entries.

D-Link DIR-850L REV. A (with firmware through FW114WWb07_h2ab_beta1) and REV. B (with firmware through FW208WWb02) devices use the same hardcoded /etc/stunnel.key private key across different customers' installations, which allows remote attackers to defeat the HTTPS cryptographic protection mechanisms by leveraging knowledge of this key from another installation.

Enphase Installer Toolkit versions 3.27.0 has hard coded credentials embedded in binary code in the Android application. An attacker can exploit this and gain access to sensitive information.

Netmaker makes networks with WireGuard. Prior to versions 0.17.1 and 0.18.6, hardcoded DNS key usage has been found in Netmaker allowing unauth users to interact with DNS API endpoints. The issue is patched in 0.17.1 and fixed in 0.18.6. If users are using 0.17.1, they should run `docker pull gravitl/netmaker:v0.17.1` and `docker-compose up -d`. This will switch them to the patched users. If users are using v0.18.0-0.18.5, they should upgrade to v0.18.6 or later. As a workaround, someone who is using version 0.17.1 can pull the latest docker image of the backend and restart the server.

NVIDIA DGX servers, all BMC firmware versions prior to 3.38.30, contain a vulnerability in the AMI BMC firmware in which it uses a hard-coded RC4 cipher key, which may lead to information disclosure.

Musical.ly Inc., musical.ly - your video social network, 6.1.6, 2017-10-03, iOS application uses a hard-coded key for encryption. Data stored using this key can be decrypted by anyone able to access this key.

Use of Hard-coded Credentials vulnerability in PAVO Inc. PAVO Pay allows Read Sensitive Constants Within an Executable.This issue affects PAVO Pay: before 13.05.2025.

An issue was discovered in PTC ThingWorx Platform 6.5 through 8.2. There is a hardcoded encryption key.

An issue was discovered on FiberHome HG6245D devices through RP2613. There is a 6GFJdY4aAuUKJjdtSn7d password for the rdsadmin account.

TOTOLINK CA300-PoE V6.2c.884 was discovered to contain a hard code password for the telnet service which is stored in the component /etc/config/product.ini.

An issue was discovered in libac_des3.so on AudioCodes VoIP desk phones through 3.4.4.1000. Due to the use of hard-coded cryptographic key, an attacker with access to backup or configuration files is able to decrypt encrypted values and retrieve sensitive information, e.g., the device root password.

Selfwealth iOS mobile App 3.3.1 is vulnerable to Sensitive key disclosure. The application reveals hardcoded API keys.

Vulnerability in the Elasticsearch database used in the of Cisco SD-WAN vManage software could allow an unauthenticated, remote attacker to access the Elasticsearch configuration database of an affected device with the privileges of the elasticsearch user. These vulnerability is due to the presence of a static username and password configured on the vManage. An attacker could exploit this vulnerability by sending a crafted HTTP request to a reachable vManage on port 9200. A successful exploit could allow the attacker to view the Elasticsearch database content. There are workarounds that address this vulnerability.

Use of Hard-coded Password vulnerability in FTP function on Mitsubishi Electric Corporation MELSEC iQ-R Series EtherNet/IP module RJ71EIP91 and MELSEC iQ-F Series EtherNet/IP module FX5-ENET/IP allows a remote unauthenticated attacker to obtain a hard-coded password and access to the module via FTP.

Common encryption key appears to be used across all deployed instances of Serv-U FTP Server. Because of this an encrypted value that is exposed to an attacker can be simply recovered to plaintext.

Use of hard-coded credentials vulnerability in php component in Synology Calendar before 2.4.0-0761 allows remote attackers to obtain sensitive information via unspecified vectors.

Shenzen Tenda Technology IP Camera CP3 V11.10.00.2211041355 was discovered to contain a hard-coded default password for root which is stored using weak encryption. This vulnerability allows attackers to connect to the TELNET service (or UART) by using the exposed credentials.

An issue was discovered in Programi Bilanc build 007 release 014 31.01.2020 and possibly below. It relies on broken encryption with a weak and guessable static encryption key.

Out of the wired and wireless interfaces within MiR100, MiR200 and other vehicles from the MiR fleet, it's possible to access the Control Dashboard on a hardcoded IP address. Credentials to such wireless interface default to well known and widely spread users (omitted) and passwords (omitted). This information is also available in past User Guides and manuals which the vendor distributed. This flaw allows cyber attackers to take control of the robot remotely and make use of the default user interfaces MiR has created, lowering the complexity of attacks and making them available to entry-level attackers. More elaborated attacks can also be established by clearing authentication and sending network requests directly. We have confirmed this flaw in MiR100 and MiR200 but according to the vendor, it might also apply to MiR250, MiR500 and MiR1000.

One of the wireless interfaces within MiR100, MiR200 and possibly (according to the vendor) other MiR fleet vehicles comes pre-configured in WiFi Master (Access Point) mode. Credentials to such wireless Access Point default to well known and widely spread SSID (MiR_RXXXX) and passwords (omitted). This information is also available in past User Guides and manuals which the vendor distributed. We have confirmed this flaw in MiR100 and MiR200 but it might also apply to MiR250, MiR500 and MiR1000.

The SNMP daemon in UTStarcom F1000 VOIP WIFI Phone s2.0 running VxWorks 5.5.1 with kernel WIND 2.6 has hard-coded public credentials that cannot be changed, which allows attackers to obtain sensitive information.

A Use of Hard-Coded Cryptographic Key issue was discovered in MRD-305-DIN versions older than 1.7.5.0, and MRD-315, MRD-355, MRD-455 versions older than 1.7.5.0. The device utilizes hard-coded private cryptographic keys that may allow an attacker to decrypt traffic from any other source.

Cisco IP Phone (VoIP) 7920 1.0(8) contains certain hard-coded ("fixed") public and private SNMP community strings that cannot be changed, which allows remote attackers to obtain sensitive information.

DASAN H660RM devices with firmware 1.03-0022 use a hard-coded key for logs encryption. Data stored using this key can be decrypted by anyone able to access this key.

dirary0.js on D-Link DIR-140L, DIR-640L devices allows remote unauthenticated attackers to discover admin credentials.

Multiple vulnerabilities in the authentication mechanisms of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrative privileges on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A CWE-798: Use of Hardcoded Credentials vulnerability exists in Modicon Controllers (All versions of the following CPUs and Communication Module product references listed in the Security Notifications), which could cause the disclosure of FTP hardcoded credentials when using the Web server of the controller on an unsecure network.

Premisys Identicard version 3.1.190 stores user credentials and other sensitive information with a known weak encryption method (MD5 hash of a salt and password).

Premisys Identicard version 3.1.190 stores backup files as encrypted zip files. The password to the zip is hard-coded and unchangeable. An attacker with access to these backups can decrypt them and obtain sensitive data.

"HCL AppScan Enterprise uses hard-coded credentials which can be exploited by attackers to get unauthorized access to application's encrypted files."

An issue was discovered in Scytl sVote 2.1. Due to the implementation of the database manager, an attacker can access the OrientDB by providing admin as the admin password. A different password cannot be set because of the implementation in code.

An issue was discovered on AudioCodes VoIP desk phones through 3.4.4.1000. Due to the use of a hard-coded cryptographic key, an attacker is able to decrypt encrypted configuration files and retrieve sensitive information.

IBM Concert Software 1.0.0 through 1.1.0 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.

Use of a hard-coded cryptographic key to encrypt security sensitive data in local storage and configuration in FortiClient for Windows prior to 6.4.0 may allow an attacker with access to the local storage or the configuration backup file to decrypt the sensitive data via knowledge of the hard-coded key.