Verint Workforce Optimization suite 15.1 (15.1.0.37634) has Unauthenticated Information Disclosure via API

The configuration file is encrypted with a static key derived from a static five-character password which allows an attacker to decrypt this file. The application hashes this five-character password with the outdated and broken MD5 algorithm (no salt) and uses the first five bytes as the key for RC4. The configuration file is then encrypted with these parameters.

Cisco IP Phone (VoIP) 7920 1.0(8) contains certain hard-coded ("fixed") public and private SNMP community strings that cannot be changed, which allows remote attackers to obtain sensitive information.

Certain TP-Link devices have a Hardcoded Encryption Key. This affects NC200 2.1.9 build 200225, N210 1.0.9 build 200304, NC220 1.3.0 build 200304, NC230 1.3.0 build 200304, NC250 1.3.0 build 200304, NC260 1.5.2 build 200304, and NC450 1.5.3 build 200304.

'OfferBox' App for Android versions 2.0.0 to 2.3.17 and 'OfferBox' App for iOS versions 2.1.7 to 2.6.14 use a hard-coded secret key for JWT. Secret key for JWT may be retrieved if the application binary is reverse-engineered.

A hardcoded privileged ID within Lumisxp v15.0.x to v16.1.x allows attackers to bypass authentication and access internal pages and other sensitive information.

IBM Security Verify Access Appliance 10.0.0 through 10.0.7 contains hard-coded credentials which it uses for its own inbound authentication that could be obtained by a malicious actor. IBM X-Force ID: 287317.

Baxter SIGMA Spectrum Infusion System version 6.05 (model 35700BAX) with wireless battery module (WBM) version 16 has a default account with hard-coded credentials used with the FTP protocol. Baxter asserts no files can be transferred to or from the WBM using this account. Baxter has released a new version of the SIGMA Spectrum Infusion System, Version 8, which incorporates hardware and software changes.

An issue in xui-xray v1.8.3 allows attackers to obtain sensitive information via default password.

NVIDIA DGX servers, DGX-1 with BMC firmware versions prior to 3.38.30. DGX-2 with BMC firmware versions prior to 1.06.06 and all DGX A100 Servers with all BMC firmware versions, contains a vulnerability in the AMI BMC firmware in which the use of a hard-coded RSA 1024 key with weak ciphers may lead to information disclosure.

One of the wireless interfaces within MiR100, MiR200 and possibly (according to the vendor) other MiR fleet vehicles comes pre-configured in WiFi Master (Access Point) mode. Credentials to such wireless Access Point default to well known and widely spread SSID (MiR_RXXXX) and passwords (omitted). This information is also available in past User Guides and manuals which the vendor distributed. We have confirmed this flaw in MiR100 and MiR200 but it might also apply to MiR250, MiR500 and MiR1000.

Out of the wired and wireless interfaces within MiR100, MiR200 and other vehicles from the MiR fleet, it's possible to access the Control Dashboard on a hardcoded IP address. Credentials to such wireless interface default to well known and widely spread users (omitted) and passwords (omitted). This information is also available in past User Guides and manuals which the vendor distributed. This flaw allows cyber attackers to take control of the robot remotely and make use of the default user interfaces MiR has created, lowering the complexity of attacks and making them available to entry-level attackers. More elaborated attacks can also be established by clearing authentication and sending network requests directly. We have confirmed this flaw in MiR100 and MiR200 but according to the vendor, it might also apply to MiR250, MiR500 and MiR1000.

Hardcoded .htaccess Credentials for getlogs.cgi exist on Altus Nexto, Nexto Xpress, and Hadron Xtorm devices. This affects Nexto NX3003 1.8.11.0, Nexto NX3004 1.8.11.0, Nexto NX3005 1.8.11.0, Nexto NX3010 1.8.3.0, Nexto NX3020 1.8.3.0, Nexto NX3030 1.8.3.0, Nexto NX5100 1.8.11.0, Nexto NX5101 1.8.11.0, Nexto NX5110 1.1.2.8, Nexto NX5210 1.1.2.8, Nexto Xpress XP300 1.8.11.0, Nexto Xpress XP315 1.8.11.0, Nexto Xpress XP325 1.8.11.0, Nexto Xpress XP340 1.8.11.0, and Hadron Xtorm HX3040 1.7.58.0.

Premisys Identicard version 3.1.190 stores user credentials and other sensitive information with a known weak encryption method (MD5 hash of a salt and password).

"HCL AppScan Enterprise uses hard-coded credentials which can be exploited by attackers to get unauthorized access to application's encrypted files."

Premisys Identicard version 3.1.190 stores backup files as encrypted zip files. The password to the zip is hard-coded and unchangeable. An attacker with access to these backups can decrypt them and obtain sensitive data.

The usage of hard-coded cryptographic keys within the ServiceAgent binary allows for the decryption of captured traffic across the network from or to the Moxa AWK-3131A firmware version 1.13.

INIM Electronics Smartliving SmartLAN/G/SI <=6.x contains hard-coded credentials in its Linux distribution image that cannot be changed through normal device operations. Attackers can exploit these persistent credentials to log in and gain unauthorized system access across multiple SmartLiving device models.

FaceSentry Access Control System 6.4.8 contains a critical authentication vulnerability with hard-coded SSH credentials for the wwwuser account. Attackers can leverage the insecure sudoers configuration to escalate privileges and gain root access by executing sudo commands without authentication.

QNAP VioCard 300 has hardcoded RSA private keys.

ifw8 Router ROM v4.31 allows credential disclosure by reading the action/usermanager.htm HTML source code.

Ricoh SP C250DN 1.05 devices have a fixed password. FTP service credential were found to be hardcoded within the printer firmware. This would allow to an attacker to access and read information stored on the shared FTP folders.

QNAP F_VioCard 2312 and F_VioGate 2308 have hardcoded entries in authorized_keys files. NOTE: 1. All active models are not affected. The last affected model was EOL since 2010. 2. The legacy authorization mechanism is no longer adopted in all active models

Xerox ColorCube and WorkCenter devices in 2013 had hardcoded FTP and shell user accounts.

Medtronic Valleylab Exchange Client version 3.4 and below, Valleylab FT10 Energy Platform (VLFT10GEN) software version 4.0.0 and below, and Valleylab FX8 Energy Platform (VLFX8GEN) software version 1.1.0 and below use multiple sets of hard-coded credentials. If discovered, they can be used to read files on the device.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Project data stored on the device, which is accessible via port 10005/tcp, can be decrypted due to a hardcoded encryption key. The security vulnerability could be exploited by an unauthenticated attacker with network access to port 10005/tcp. No user interaction is required to exploit this security vulnerability. The vulnerability impacts confidentiality of the device. At the time of advisory publication no public exploitation of this security vulnerability was known.

An issue was discovered on AudioCodes VoIP desk phones through 3.4.4.1000. Due to the use of a hard-coded cryptographic key, an attacker is able to decrypt encrypted configuration files and retrieve sensitive information.

Use of hard-coded credentials vulnerability in php component in Synology Calendar before 2.4.0-0761 allows remote attackers to obtain sensitive information via unspecified vectors.

An issue was discovered in CommentsService.ashx in OnyakTech Comments Pro 3.8. An attacker can download a copy of the installer, decompile it, and discover a hardcoded IV used to encrypt the username and userid in the comment POST request. Additionally, the attacker can decrypt the encrypted encryption key (sent as a parameter in the comment form request) by setting this encrypted value as the username, which will appear on the comment page in its decrypted form. Using these two values (combined with the encryption functionality discovered in the decompiled installer), the attacker can encrypt another user's ID and username. These values can be used as part of the comment posting request in order to spoof the user.

An attacker can gain VxWorks Shell after login due to hard-coded credentials on a KUKA KR C4 control software for versions prior to 8.7 or any product running KSS.

Philips e-Alert Unit (non-medical device), Version R2.1 and prior. The software contains hard-coded cryptographic key, which it uses for encryption of internal data.

The IMM2 First Failure Data Capture function collects management module logs and diagnostic information when a hardware error is detected. This information is made available for download through an SFTP server hosted on the IMM2 management network interface. In versions earlier than 4.90 for Lenovo System x and earlier than 6.80 for IBM System x, the credentials to access the SFTP server are hard-coded and described in the IMM2 documentation, allowing an attacker with management network access to obtain the collected FFDC data. After applying the update, the IMM2 will create random SFTP credentials for use with OneCLI.

Heatmiser Netmonitor 3.03 contains a hardcoded credentials vulnerability in the networkSetup.htm page with predictable admin login credentials. Attackers can access the device by using the hard-coded username 'admin' and password 'admin' in the hidden form input fields.

Use of Hard-coded Credentials in GitHub repository microweber/microweber prior to 2.0.

eWON Firmware versions 12.2 to 13.0 contain an authentication bypass vulnerability that allows attackers with minimal privileges to retrieve sensitive user data by exploiting the wsdReadForm endpoint. Attackers can send POST requests to /wrcgi.bin/wsdReadForm with base64-encoded partial credentials and a crafted wsdList parameter to extract encrypted passwords for all users, which can be decrypted using a hardcoded XOR key.

The account validation endpoint /v1/User/validate returns comprehensive user profile data sheets, which can be crawled by iterating predictable identification strings.

Use of Hard-coded Password vulnerability in FTP function on Mitsubishi Electric Corporation MELSEC iQ-R Series EtherNet/IP module RJ71EIP91 and MELSEC iQ-F Series EtherNet/IP module FX5-ENET/IP allows a remote unauthenticated attacker to obtain a hard-coded password and access to the module via FTP.

An issue was discovered on FiberHome HG6245D devices through RP2613. Credentials in /fhconf/umconfig.txt are obfuscated via XOR with the hardcoded *j7a(L#yZ98sSd5HfSgGjMj8;Ss;d)(*&^#@$a2s0i3g key. (The webs binary has details on how XOR is used.)

An issue was discovered on FiberHome HG6245D devices through RP2613. A hardcoded GEPON password for root is defined inside /etc/init.d/system-config.sh.

An issue was discovered on FiberHome HG6245D devices through RP2613. There is a password of four hexadecimal characters for the admin account. These characters are generated in init_3bb_password in libci_adaptation_layer.so.

A use of hard-coded cryptographic key vulnerability in the SSLVPN of FortiOS before 7.0.1 may allow an attacker to retrieve the key by reverse engineering.

An issue was discovered in svc-login.php in Void Aural Rec Monitor 9.0.0.1. Passwords are stored in unencrypted source-code text files. This was noted when accessing the svc-login.php file. The value is used to authenticate a high-privileged user upon authenticating with the server.

A reliance on a static, hard-coded credential in the design of the cloud-based storage system of Practecol's Guardzilla All-In-One Video Security System allows an attacker to view the private data of all users of the Guardzilla device.

An Authentication Bypass vulnerability exists in the web interface in Zavio IP Cameras through 1.6.03 due to a hardcoded admin account found in boa.conf, which lets a remote malicious user obtain sensitive information.

Hardcoded credentials in Dietly v1.25.0 for android allows attackers to gain sensitive information.

An attacker can gain full access (read/write/delete) to sensitive folders due to hard-coded credentials on KUKA KR C4 control software for versions prior to 8.7 or any product running KSS.

Usage of hard-coded cryptographic keys to encrypt configuration files and debug logs in FortiAuthenticator versions before 6.3.0 may allow an attacker with access to the files or the CLI configuration to decrypt the sensitive data, via knowledge of the hard-coded key.

Vulnerability in the Elasticsearch database used in the of Cisco SD-WAN vManage software could allow an unauthenticated, remote attacker to access the Elasticsearch configuration database of an affected device with the privileges of the elasticsearch user. These vulnerability is due to the presence of a static username and password configured on the vManage. An attacker could exploit this vulnerability by sending a crafted HTTP request to a reachable vManage on port 9200. A successful exploit could allow the attacker to view the Elasticsearch database content. There are workarounds that address this vulnerability.

A Security Bypass vulnerability exists in TP-LINK IP Cameras TL-SC 3130, TL-SC 3130G, 3171G, 4171G, and 3130 1.6.18P12 due to default hard-coded credentials for the administrative Web interface, which could let a malicious user obtain unauthorized access to CGI files.

Retty App for Android versions prior to 4.8.13 and Retty App for iOS versions prior to 4.11.14 uses a hard-coded API key for an external service. By exploiting this vulnerability, API key for an external service may be obtained by analyzing data in the app.