visionmedia send before 0.8.4 for Node.js uses a partial comparison for verifying whether a directory is within the document root, which allows remote attackers to access restricted directories, as demonstrated using "public-restricted" under a "public" directory.

An exploitable buffer overflow exists in the Joyent SmartOS 20161110T013148Z Hyprlofs file system. The vulnerability is present in the Ioctl system call with the command HYPRLOFS_ADD_ENTRIES when dealing with native file systems. An attacker can craft an input that can cause a buffer overflow in the nm variable leading to an out of bounds memory access and could result in potential privilege escalation. This vulnerability is distinct from CVE-2016-9034.

An exploitable buffer overflow exists in the Joyent SmartOS 20161110T013148Z Hyprlofs file system. The vulnerability is present in the Ioctl system call with the command HYPRLOFS_ADD_ENTRIES when dealing with native file systems. An attacker can craft an input that can cause a buffer overflow in the path variable leading to an out of bounds memory access and could result in potential privilege escalation. This vulnerability is distinct from CVE-2016-9033.

An exploitable buffer overflow exists in the Joyent SmartOS 20161110T013148Z Hyprlofs file system. The vulnerability is present in the Ioctl system call with the command HYPRLOFS_ADD_ENTRIES when dealing with 32-bit file systems. An attacker can craft an input that can cause a buffer overflow in the nm variable leading to an out of bounds memory access and could result in potential privilege escalation. This vulnerability is distinct from CVE-2016-9032.

An exploitable buffer overflow exists in the Joyent SmartOS 20161110T013148Z Hyprlofs file system. The vulnerability is present in the Ioctl system call with the command HYPRLOFS_ADD_ENTRIES when dealing with native file systems. An attacker can craft an input that can cause a buffer overflow in the path variable leading to an out of bounds memory access and could result in potential privilege escalation. This vulnerability is distinct from CVE-2016-9035.

A vulnerability was found in TOTOLINK X15 1.0.0-B20230714.1105. It has been classified as critical. Affected is an unknown function of the file /boafrm/formMapDelDevice of the component HTTP POST Request Handler. The manipulation of the argument macstr leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

Potential buffer overflow vulnerability in mm_Plmncoordination.c in Shannon baseband prior to SMR May-2023 Release 1 allows remote attackers to cause invalid memory access.

A vulnerability regarding buffer copy without checking size of input ('Classic Buffer Overflow') is found in the libjansson component and it does not affect the upstream library. This allows remote attackers to execute arbitrary code via unspecified vectors. The following models with Synology Camera Firmware versions before 1.0.7-0298 may be affected: BC500 and TC500.

A vulnerability was identified in INSTAR 2K+ and 4K 3.11.1 Build 1124. This affects the function base64_decode of the component fcgi_server. The manipulation of the argument Authorization leads to buffer overflow. It is possible to initiate the attack remotely.

Buffer Overflow vulnerability in SunBK201 umicat through v.0.3.2 and fixed in v.0.3.3 allows an attacker to execute arbitrary code via the power(uct_int_t x, uct_int_t n) in src/uct_upstream.c.

A vulnerability was found in D-Link DIR-513 1.10. It has been rated as critical. Affected by this issue is the function websAspInit of the file /goform/formSetWanPPPoE. The manipulation of the argument curTime leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

The issue was addressed with improved bounds checks. This issue is fixed in iOS 15.7.1 and iPadOS 15.7.1, macOS Ventura 13, iOS 16.1 and iPadOS 16, macOS Monterey 12.6.1, macOS Big Sur 11.7.1. A buffer overflow may result in arbitrary code execution.

Multiple buffer overflows in STLport before 5.0.3 allow remote attackers to execute arbitrary code via unspecified vectors relating to (1) "print floats" and (2) a missing null termination in the "rope constructor."

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.x) software. There is an array overflow in a driver's input booster. The Samsung ID is SVE-2017-11816 (August 2018).

A vulnerability classified as critical has been found in D-Link DIR-513 1.10. This affects the function formSetWanPPTPcallback of the file /goform/formSetWanPPTPpath of the component HTTP POST Request Handler. The manipulation of the argument curTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

netgear R6250 Firmware Version 1.0.4.48 is vulnerable to Buffer Overflow after authentication.

Buffer overflow vulnerability in file ecma-builtin-array-prototype.c:909 in function ecma_builtin_array_prototype_object_slice in Jerryscript before commit e1ce7dd7271288be8c0c8136eea9107df73a8ce2 on Oct 20, 2021.

An issue was discovered on Samsung mobile devices with software through 2017-11-03 (S.LSI modem chipsets). The Exynos modem chipset has a baseband buffer overflow. The Samsung ID is SVE-2017-10745 (January 2018).

Buffer overflow in the gdImageStringFTEx function in gdft.c in GD Graphics Library 2.0.33 and earlier allows remote attackers to cause a denial of service (application crash) and possibly execute arbitrary code via a crafted string with a JIS encoded font.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects D7800 before 1.0.1.34, DM200 before 1.0.0.50, EX2700 before 1.0.1.32, EX6100v2 before 1.0.1.70, EX6150v2 before 1.0.1.70, EX6200v2 before 1.0.1.62, EX6400 before 1.0.1.78, EX7300 before 1.0.1.62, EX8000 before 1.0.0.114, R6100 before 1.0.1.22, R7500 before 1.0.0.122, R7500v2 before 1.0.3.26, R7800 before 1.0.2.40, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WN2000RPTv3 before 1.0.1.26, WN3000RPv2 before 1.0.0.56, WN3000RPv3 before 1.0.2.66, WN3100RPv2 before 1.0.0.56, WNDR4300 before 1.0.2.98, WNDR4300v2 before 1.0.0.54, WNDR4500v3 before 1.0.0.54, and WNR2000v5 before 1.0.0.64.

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.X) (Exynos chipsets) software. There is a Buffer overflow in the esecomm Trustlet, leading to arbitrary code execution. The Samsung ID is SVE-2018-12852 (October 2018).

An issue was discovered in MBed OS 6.16.0. When parsing hci reports, the hci parsing software dynamically determines the length of a list of reports by reading a byte from an input stream. It then fetches the length of the first report, uses it to calculate the beginning of the second report, etc. In doing this, it tracks the largest report so it can later allocate a buffer that fits every individual report (but only one at a time). It does not, however, validate that these addresses are all contained within the buffer passed to hciEvtProcessLeExtAdvReport. It is then possible, though unlikely, that the buffer designated to hold the reports is allocated in such a way that one of these out-of-bounds length fields is contained within the new buffer. When the (n-1)th report is copied, it overwrites the length field of the nth report. This now corrupted length field is then used for a memcpy into the new buffer, which may lead to a buffer overflow.

An issue was discovered on Samsung mobile devices with M(6.0) (Exynos or MediaTek chipsets) software. There is a buffer overflow in a Trustlet that can cause memory corruption. The Samsung ID is SVE-2018-11599 (July 2018).

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.0) software. The sem Trustlet has a buffer overflow that leads to arbitrary TEE code execution. The Samsung IDs are SVE-2018-13230, SVE-2018-13231, SVE-2018-13232, SVE-2018-13233 (December 2018).

On BIG-IP versions 16.0.x before 16.0.1.1, 15.1.x before 15.1.2.1, 14.1.x before 14.1.4, 13.1.x before 13.1.3.6, 12.1.x before 12.1.5.3, and 11.6.x before 11.6.5.3, a malicious HTTP response to an Advanced WAF/BIG-IP ASM virtual server with Login Page configured in its policy may trigger a buffer overflow, resulting in a DoS attack. In certain situations, it may allow remote code execution (RCE), leading to complete system compromise. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

nfs_lookup_reply in net/nfs.c in Das U-Boot through 2022.04 (and through 2022.07-rc2) has an unbounded memcpy with a failed length check, leading to a buffer overflow. NOTE: this issue exists because of an incorrect fix for CVE-2019-14196.

A buffer overflow vulnerability in the URL parser of the zhttpd web server in Zyxel VMG8825-T50K firmware versions prior to V5.50(ABOM.5)C0 could allow an unauthenticated attacker to cause denial-of-service (DoS) conditions and potentially execute arbitrary code by sending a specially crafted HTTP request.

Buffer Overflow found in Nginx NJS allows a remote attacker to execute arbitrary code via the njs_object_property parameter of the njs/njs_vm.c function.

Buffer overflow in the mipsnet_receive function in hw/net/mipsnet.c in QEMU, when the guest NIC is configured to accept large packets, allows remote attackers to cause a denial of service (memory corruption and QEMU crash) or possibly execute arbitrary code via a packet larger than 1514 bytes.

Rockwell Automation MicroLogix 1400 Version 21.6 and below may allow a remote unauthenticated attacker to send a specially crafted Modbus packet allowing the attacker to retrieve or modify random values in the register. If successfully exploited, this may lead to a buffer overflow resulting in a denial-of-service condition. The FAULT LED will flash RED and communications may be lost. Recovery from denial-of-service condition requires the fault to be cleared by the user.

A heap-based buffer overflow vulnerability exists in the XML Decompression DecodeTreeBlock functionality of AT&T Labs Xmill 0.7. Within `DecodeTreeBlock` which is called during the decompression of an XMI file, a UINT32 is loaded from the file and used as trusted input as the length of a buffer. An attacker can provide a malicious file to trigger this vulnerability.

A heap-based buffer overflow vulnerability exists in the XML Decompression DecodeTreeBlock functionality of AT&T Labs Xmill 0.7. In the default case of DecodeTreeBlock a label is created via CurPath::AddLabel in order to track the label for later reference. An attacker can provide a malicious file to trigger this vulnerability.

Buffer overflow vulnerability in Core FTP Server v1.2 Build 583, via a crafted username.

A CWE-120: Buffer Copy without Checking Size of Input vulnerability exists that could result in remote code execution due to missing length check on user supplied data, when a constructed message is received on the network. Affected Product: Interactive Graphical SCADA System Data Collector (dc.exe) (V15.0.0.21243 and prior)

A buffer overflow vulnerability exists in the httpd next_page functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to command execution. An attacker can send a network request to trigger this vulnerability.This buffer overflow is in the next_page parameter in the cgi_handler function.

A vulnerability was found in FreeFloat FTP Server 1.0 and classified as critical. This issue affects some unknown processing of the component RESTART Command Handler. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in UTT 进取 750W up to 5.0. It has been classified as critical. This affects the function strcpy of the file /goform/setSysAdm of the component API. The manipulation of the argument passwd1 leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in FreeFloat FTP Server 1.0. It has been rated as critical. Affected by this issue is some unknown functionality of the component REIN Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in FreeFloat FTP Server 1.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the component XMKD Command Handler. The manipulation leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

Potential buffer overflow vulnerability in auth api in mm_Authentication.c in Shannon baseband prior to SMR May-2023 Release 1 allows remote attackers to cause invalid memory access.

A heap-based buffer overflow vulnerability exists in the XML Decompression DecodeTreeBlock functionality of AT&T Labs Xmill 0.7. Within `DecodeTreeBlock` which is called during the decompression of an XMI file, a UINT32 is loaded from the file and used as trusted input as the length of a buffer. An attacker can provide a malicious file to trigger this vulnerability.

A stack buffer overflow vulnerability has been reported to affect QNAP device running QVR Elite, QVR Pro, QVR Guard. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of QVR Elite, QVR Pro, QVR Guard: QuTS hero h5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QuTS hero h4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 5.0.0: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Elite 2.1.4.0 (2021/12/06) and later QTS 4.5.4: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Pro 2.1.3.0 (2021/12/06) and later QTS 4.5.4: QVR Guard 2.1.3.0 (2021/12/06) and later QTS 5.0.0: QVR Guard 2.1.3.0 (2021/12/06) and later

A stack buffer overflow vulnerability has been reported to affect QNAP NAS running Surveillance Station. If exploited, this vulnerability allows attackers to execute arbitrary code. We have already fixed this vulnerability in the following versions of Surveillance Station: QTS 5.0.0 (64 bit): Surveillance Station 5.2.0.4.2 ( 2021/10/26 ) and later QTS 5.0.0 (32 bit): Surveillance Station 5.2.0.3.2 ( 2021/10/26 ) and later QTS 4.3.6 (64 bit): Surveillance Station 5.1.5.4.6 ( 2021/10/26 ) and later QTS 4.3.6 (32 bit): Surveillance Station 5.1.5.3.6 ( 2021/10/26 ) and later QTS 4.3.3: Surveillance Station 5.1.5.3.6 ( 2021/10/26 ) and later

A vulnerability was found in WAVLINK QUANTUM D2G, QUANTUM D3G, WL-WN530G3A, WL-WN530HG3, WL-WN532A3 and WL-WN576K1 up to V1410_240222 and classified as critical. Affected by this issue is the function sys_login of the file /cgi-bin/login.cgi of the component HTTP POST Request Handler. The manipulation of the argument login_page leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, has been found in FreeFloat FTP Server 1.0. Affected by this issue is some unknown functionality of the component PASSIVE Command Handler. The manipulation leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A buffer overflow issue was discovered in the HMI3 Control Panel contained within the Swisslog Healthcare Nexus Panel, operated by released versions of software before Nexus Software 7.2.5.7. A buffer overflow allows an attacker to overwrite an internal queue data structure and can lead to remote code execution.

WAYOS FBM-291W 19.09.11V was discovered to contain a buffer overflow via the component /upgrade_filter.asp.

An issue was discovered in Trusted Firmware-M through 2.1.0. User provided (and controlled) mailbox messages contain a pointer to a list of input arguments (in_vec) and output arguments (out_vec). These list pointers are never validated. Each argument list contains a buffer pointer and a buffer length field. After a PSA call, the length of the output arguments behind the unchecked pointer is updated in mailbox_direct_reply, regardless of the call result. This allows an attacker to write anywhere in the secure firmware, which can be used to take over the control flow, leading to remote code execution (RCE).

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formSysCmd function via the submit-url parameter.