Tenda ONT GPON AC1200 Dual band WiFi HG9 v1.0.1 is vulnerable to Command Injection via the Ping function.

An issue was discovered on AudioCodes 450HD IP Phone devices with firmware 3.0.0.535.106. The traceroute and ping functionality, which uses a parameter in a request to command.cgi from the Monitoring page in the web UI, unsafely puts user-alterable data directly into an OS command, leading to Remote Code Execution via shell metacharacters in the query string.

diag_ping.cmd on D-Link DSL-2640U devices with firmware IM_1.00 and ME_1.00, and DSL-2540U devices with firmware ME_1.00, allows authenticated remote attackers to execute arbitrary OS commands via shell metacharacters in the ipaddr field of an HTTP GET request.

A remote authenticated command injection vulnerability was discovered in Aruba ClearPass Policy Manager version(s): Prior to 6.9.5, 6.8.8-HF1, 6.7.14-HF1. A vulnerability in the ClearPass web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise.

Magento versions 2.4.1 (and earlier), 2.4.0-p1 (and earlier) and 2.3.6 (and earlier) are vulnerable to OS command injection via the scheduled operation module. Successful exploitation could lead to arbitrary code execution by an authenticated attacker. Access to the admin console is required for successful exploitation.

Devices in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04) are susceptible to OS command injection vulnerabilities due to improper filtering of data passed to and retrieved from NVRAM. Data entered into the 'Router Name' input field through the web portal is submitted to apply.cgi as the value to the 'machine_name' POST parameter. When the 'preinit' binary receives the SIGHUP signal, it enters a code path that continues until it reaches offset 0x0042B5C4 in the 'start_lltd' function. Within the 'start_lltd' function, a 'nvram_get' call is used to obtain the value of the user-controlled 'machine_name' NVRAM entry. This value is then entered directly into a command intended to write the host name to a file and subsequently executed.

An exploitable vulnerability exists in the notifications functionality of Circle with Disney running firmware 2.0.1. Specially crafted network packets can cause an OS command injection. An attacker can send an HTTP request to trigger this vulnerability.

Tenda AX1806 v1.0.0.1 was discovered to contain a command injection vulnerability in `SetIPv6Status` function

An exploitable operating system command injection exists in the Linksys ESeries line of routers (Linksys E1200 Firmware Version 2.0.09 and Linksys E2500 Firmware Version 3.0.04). Specially crafted entries to network configuration information can cause execution of arbitrary system commands, resulting in full control of the device. An attacker can send an authenticated HTTP request to trigger this vulnerability. Data entered into the 'Domain Name' input field through the web portal is submitted to apply.cgi as the value to the 'wan_domain' POST parameter. The wan_domain data goes through the nvram_set process described above. When the 'preinit' binary receives the SIGHUP signal it enters a code path that calls a function named 'set_host_domain_name' from its libshared.so shared object.

An exploitable command injection vulnerability exists in the ACEManager iplogging.cgi functionality of Sierra Wireless AirLink ES450 FW 4.9.3. A specially crafted HTTP request can inject arbitrary commands, resulting in arbitrary command execution. An attacker can send an authenticated HTTP request to trigger this vulnerability.

An exploitable command injection vulnerability exists in the iw_webs functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted iw_serverip parameter can cause user input to be reflected in a subsequent iw_system call, resulting in remote control over the device. An attacker can send commands while authenticated as a low privilege user to trigger this vulnerability.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to authenticated command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/device_Form?script/.

An exploitable authenticated command-injection vulnerability exists in the web server functionality of Moxa NPort W2x50A products with firmware before 2.2 Build_18082311. A specially crafted HTTP POST request to /goform/net_WebPingGetValue can result in running OS commands as the root user. This is similar to CVE-2017-12120.

An issue was discovered in MISP 2.4.9x before 2.4.99. In app/Model/Event.php (the STIX 1 import code), an unescaped filename string is used to construct a shell command. This vulnerability can be abused by a malicious authenticated user to execute arbitrary commands by tweaking the original filename of the STIX import.

The Alcatel Lucent I-240W-Q GPON ONT using firmware version 3FE54567BOZJ19 is vulnerable to command injection via crafted HTTP request sent by a remote, authenticated attacker to /GponForm/usb_restore_Form?script/.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. They allow remote attackers to execute arbitrary OS commands via shell metacharacters in the usrName parameter of a CGIProxy.fcgi addAccount action.

An exploitable command injection vulnerability exists in encrypted diagnostic script functionality of the Moxa AWK-3131A firmware version 1.13. A specially crafted diagnostic script file can cause arbitrary busybox commands to be executed, resulting in remote control over the device. An attacker can send diagnostic while authenticated as a low privilege user to trigger this vulnerability.

Seeds acmailer before 3.8.21 and 3.9.x before 3.9.15 Beta allows remote authenticated users to execute arbitrary OS commands via unspecified vectors.

A sandbox escape issue was discovered in VyOS 1.1.8. It provides a restricted management shell for operator users to administer the device. By issuing various shell special characters with certain commands, an authenticated operator user can break out of the management shell and gain access to the underlying Linux shell. The user can then run arbitrary operating system commands with the privileges afforded by their account.

A vulnerability has been found in ajenti 2.1.31 and classified as critical. This vulnerability affects unknown code of the component API. The manipulation leads to privilege escalation. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 2.1.32 is able to address this issue. The name of the patch is 7aa146b724e0e20cfee2c71ca78fafbf53a8767c. It is recommended to upgrade the affected component.

TRENDnet TEW-673GRU v1.00b40 devices have an OS command injection vulnerability in the start_arpping function of the timer binary, which allows remote attackers to execute arbitrary commands via three parameters (dhcpd_start, dhcpd_end, and lan_ipaddr) passed to the apply.cgi binary through a POST request.

Cerio DT-300N 1.1.6 through 1.1.12 devices allow OS command injection because of improper input validation of the web-interface PING feature's use of Save.cgi to execute a ping command, as exploited in the wild in October 2018.

pfSense before 2.3 allows remote authenticated users to execute arbitrary OS commands via a '|' character in the status_rrd_graph_img.php graph parameter, related to _rrd_graph_img.php.

Ruckus Wireless H500 web management interface authenticated command injection

The Port Forwarding functionality on DASAN H660GW devices allows remote attackers to execute arbitrary code via shell metacharacters in the cgi-bin/adv_nat_virsvr.asp Addr parameter (aka the Local IP Address field).

In Nagios XI 5.6.9, an authenticated user is able to execute arbitrary OS commands via shell metacharacters in the id parameter to schedulereport.php, in the context of the web-server user account.

An issue was discovered on D-Link DSL-3782 devices with firmware 1.01. An OS command injection vulnerability in Acl.asp allows a remote authenticated attacker to execute arbitrary OS commands via the ScrIPaddrEndTXT parameter.

pphoto in Ariadne before 2.6 allows remote authenticated users with certain privileges to execute arbitrary shell commands via vectors related to PINP programs and the annotate command. NOTE: some of these details are obtained from third party information.

An OS command injection vulnerability exists in the Web Manager Wireless Network Scanner functionality of Lantronix PremierWave 2050 8.9.0.0R4. A specially-crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

netflow_get_stats in functions_netflow.php in Pandora FMS 7.0NG allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the ip_src parameter in an index.php?operation/netflow/nf_live_view request. This issue has been fixed in Pandora FMS 7.0 NG 742.

An OS command injection vulnerability exists in the Web Manager Diagnostics: Traceroute functionality of Lantronix PremierWave 2050 8.9.0.0R4. A specially-crafted HTTP request can lead to arbitrary command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

IBM BigFix Platform 9.0, 9.1 before 9.1.8, and 9.2 before 9.2.8 allow remote authenticated users to execute arbitrary commands by leveraging report server access. IBM X-Force ID: 111302.

Incorrect input sanitation in text-oriented user interfaces (telnet, ssh) in Swisscom Centro Grande before 6.16.12 allows remote authenticated users to execute arbitrary commands via command injection.

BMC Control-M/Agent 7.0.00.000 allows OS Command Injection.

A command injection vulnerability in PWS in Imperva SecureSphere 13.0.0.10 and 13.1.0.10 Gateway allows an attacker with authenticated access to execute arbitrary OS commands on a vulnerable installation.

A command injection vulnerability in the web server functionality of Moxa EDR-810 V4.2 build 18041013 allows remote attackers to execute arbitrary OS commands with root privilege via the caname parameter to the /xml/net_WebCADELETEGetValue URI.

On certain TOTOLINK Realtek SDK based routers, an authenticated attacker may execute arbitrary OS commands via the sysCmd parameter to the boafrm/formSysCmd URI, even if the GUI (syscmd.htm) is not available. This allows for full control over the device's internals. This affects A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, N100RE through 3.4.0, and N302RE 2.0.2.

Command Injection in minPlayCommand.php in Centreon (19.04.4 and below) allows an attacker to achieve command injection via a plugin test.

sa-exim 4.2.1 allows attackers to execute arbitrary code if they can write a .cf file or a rule. This occurs because Greylisting.pm relies on eval (rather than direct parsing and/or use of the taint feature). This issue is similar to CVE-2018-11805.

The network diagnostic function (ping) in the Yeahlink Ultra-elegant IP Phone SIP-T41P (firmware 66.83.0.35) allows a remote authenticated attacker to trigger OS commands or open a reverse shell via command injection.

Dell OpenManage Enterprise-Modular (OME-M) versions prior to 1.30.00 contain a security bypass vulnerability. An authenticated malicious user with low privileges may potentially exploit the vulnerability to escape from the restricted environment and gain access to sensitive information in the system, resulting in information disclosure and elevation of privilege.

An authenticated command injection vulnerability exists in IPFire Firewall before 2.21 Core Update 124 in backup.cgi. This allows an authenticated user with privileges for the affected page to execute arbitrary commands.

/usr/lib/lua/luci/controller/admin/autoupgrade.lua on PHICOMM K2(PSG1218) V22.5.9.163 devices allows remote authenticated users to execute any command via shell metacharacters in the cgi-bin/luci autoUpTime parameter.

D-Link DIR-846 devices with firmware 100.26 allow remote attackers to execute arbitrary code as root via a SetNetworkTomographySettings request by leveraging admin access.

NUUO NVRMini2 version 3.9.1 is vulnerable to authenticated remote command injection. An attacker can send crafted requests to upgrade_handle.php to execute OS commands as root.

On SuperMicro X8STi-F motherboards with IPMI firmware 2.06 and BIOS 02.68, the Virtual Media feature allows OS Command Injection by authenticated attackers who can send HTTP requests to the IPMI IP address. This requires a POST to /rpc/setvmdrive.asp with shell metacharacters in ShareHost or ShareName. The attacker can achieve a persistent backdoor.

The Strapi framework before 3.0.0-beta.17.8 is vulnerable to Remote Code Execution in the Install and Uninstall Plugin components of the Admin panel, because it does not sanitize the plugin name, and attackers can inject arbitrary shell commands to be executed by the execa function.

A shell escape vulnerability in /webconsole/Controller in Admin Portal of Sophos XG firewall 17.0.8 MR-8 allow remote authenticated attackers to execute arbitrary OS commands via shell metacharacters in the "dbName" POST parameter.

Shanghai Feixun Data Communication Technology Co., Ltd router fir302b A2 was discovered to contain a remote command execution (RCE) vulnerability via the Ping function.

An issue was discovered on Tenda AC9 V15.03.05.19(6318)_CN and AC10 V15.03.06.23_CN devices. The mac parameter in a POST request is used directly in a doSystemCmd call, causing OS command injection.