Privilege Escalation in OpenText Dimensions RM allows an authenticated user to escalate there privilege to the privilege of another user via HTTP Request
Glewlwyd 2.0.0, fixed in 2.6.1 is affected by an incorrect access control vulnerability. One user can attempt to log in as another user without its password.
The HomeAutomationGateway service in MiCasaVerde VeraLite with firmware 1.5.408 allows (1) remote attackers to execute arbitrary Lua code via a RunLua action in a request to upnp/control/hag on port 49451 or (2) remote authenticated users to execute arbitrary Lua code via a RunLua action in a request to port_49451/upnp/control/hag.
eLabFTW is an electronic lab notebook manager for research teams. In versions prior to 4.2.0 there is a vulnerability which allows any authenticated user to gain access to arbitrary accounts by setting a specially crafted email address. This vulnerability impacts all instances that have not set an explicit email domain name allowlist. Note that whereas neither administrators nor targeted users are notified of a change, an attacker will need to control an account. The default settings require administrators to validate newly created accounts. The problem has been patched. Users should upgrade to at least version 4.2.0. For users unable to upgrade enabling an email domain allow list (from Sysconfig panel, Security tab) will completely resolve the issue.
Insufficient security checks exist in the recovery procedure used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A HTTP request can allow for a user to perform a firmware upgrade using a crafted image. Before any firmware upgrades in this image are flashed to the device, binaries as well as arguments to shell commands contained in the image are executed with elevated privileges.
It was found that there were no permission checks performed in the Distributed Fork plugin before and including 1.5.0 for Jenkins that provides the dist-fork CLI command beyond the basic check for Overall/Read permission, allowing anyone with that permission to run arbitrary shell commands on all connected nodes.
An issue was discovered in OverIT Geocall 6.3 before build 2:346977. Weak authentication and session management allows an authenticated user to obtain access to the Administrative control panel and execute administrative functions.
A flaw was found in the reset credential flow in all Keycloak versions before 8.0.0. This flaw allows an attacker to gain unauthorized access to the application.
Adobe Commerce versions 2.4.7-p2, 2.4.6-p7, 2.4.5-p9, 2.4.4-p10 and earlier are affected by an Improper Authentication vulnerability that could result in a security feature bypass. A low-privileged attacker could leverage this vulnerability to gain unauthorized access without proper credentials. Exploitation of this issue does not require user interaction.
A authentication bypass vulnerability exists in GitLab CE/EE <v12.3.2, <v12.2.6, and <v12.1.10 in the Salesforce login integration that could be used by an attacker to create an account that bypassed domain restrictions and email verification requirements.
ArmorX Android APP's multi-factor authentication (MFA) for the login function is not properly implemented. Remote attackers who obtain user credentials can bypass MFA, allowing them to successfully log into the APP.
An improper authentication vulnerability [CWE-287] in FortiOS versions 7.4.1 and below, versions 7.2.6 and below, and versions 7.0.12 and below when configured with FortiAuthenticator in HA may allow a readonly user to gain read-write access via successive login attempts.
A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02; SIPROTEC 7SJ686 : All versions < V 4.87; SIPROTEC 7UT686 : All versions < V 4.02; SIPROTEC 7SD686 : All versions < V 4.05; SIPROTEC 7SJ66 : All versions < V 4.30. Attackers with network access to the device's web interface (port 80/tcp) could possibly circumvent authentication and perform certain administrative operations. A legitimate user must be logged into the web interface for the attack to be successful.
A flaw was found in SSSD version 1.9.0. The SSSD's access-provider logic causes the result of the HBAC rule processing to be ignored in the event that the access-provider is also handling the setup of the user's SELinux user context.
AIMANAGER before B115 on MONITORAPP Application Insight Web Application Firewall (AIWAF) devices with Manager 2.1.0 has Improper Authentication. An attacker can gain administrative access by modifying the response to an authentication check request.
An issue has been discovered in GitLab CE/EE affecting all versions starting from 7.8 before 16.9.6, all versions starting from 16.10 before 16.10.4, all versions starting from 16.11 before 16.11.1. Under certain conditions, an attacker with their Bitbucket account credentials may be able to take over a GitLab account linked to another user's Bitbucket account, if Bitbucket is used as an OAuth 2.0 provider on GitLab.
The LDAP over SSL (aka LDAPS) implementation in Active Directory, Active Directory Application Mode (ADAM), and Active Directory Lightweight Directory Service (AD LDS) in Microsoft Windows XP SP2 and SP3, Windows Server 2003 SP2, Windows Vista SP2, Windows Server 2008 SP2, R2, and R2 SP1, and Windows 7 Gold and SP1 does not examine Certificate Revocation Lists (CRLs), which allows remote authenticated users to bypass intended certificate restrictions and access Active Directory resources by leveraging a revoked X.509 certificate for a domain account, aka "LDAPS Authentication Bypass Vulnerability."
Improper authentication in Microsoft Dataverse allows an authorized attacker to elevate privileges over a network.
A vulnerability has been identified in the management interface of Citrix NetScaler Application Delivery Controller (ADC) and NetScaler Gateway 10.1 before build 135.18, 10.5 before build 66.9, 10.5e before build 60.7010.e, 11.0 before build 70.16, 11.1 before build 55.13, and 12.0 before build 53.13 (except for build 41.24) that, if exploited, could allow an attacker with access to the NetScaler management interface to gain administrative access to the appliance.
Symfony is a PHP framework for web and console applications and a set of reusable PHP components. A vulnerability related to firewall authentication is in Symfony starting with version 5.3.0 and prior to 5.3.2. When an application defines multiple firewalls, the token authenticated by one of the firewalls was available for all other firewalls. This could be abused when the application defines different providers for each part of the application, in such a situation, a user authenticated on a part of the application could be considered authenticated on the rest of the application. Starting in version 5.3.2, a patch ensures that the authenticated token is only available for the firewall that generates it.
An improper authentication vulnerability has been reported to affect Music Station. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following version: Music Station 5.4.0 and later
SOOTEWAY Wi-Fi Range Extender v1.5 was discovered to use default credentials (the admin password for the admin account) to access the TELNET service, allowing attackers to erase/read/write the firmware remotely.
In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, under certain conditions, authentication is bypassed by unprivileged users who are accessing the Web UI. This issue affects: Arista Metamako Operating System MOS-0.34.0 and prior releases
Grav is a content management system (CMS). Prior to version 1.7.43, users who may write a page may use the `frontmatter` feature due to insufficient permission validation and inadequate file name validation. This may lead to remote code execution. Version 1.7.43 fixes this issue.
OpenObserve is a observability platform built specifically for logs, metrics, traces, analytics, designed to work at petabyte scale. A vulnerability has been identified in the "/api/{org_id}/users" endpoint. This vulnerability allows any authenticated regular user ('member') to add new users with elevated privileges, including the 'root' role, to an organization. This issue circumvents the intended security controls for role assignments. The vulnerability resides in the user creation process, where the payload does not validate the user roles. A regular user can manipulate the payload to assign root-level privileges. This vulnerability leads to Unauthorized Privilege Escalation and significantly compromises the application's role-based access control system. It allows unauthorized control over application resources and poses a risk to data security. All users, particularly those in administrative roles, are impacted. This issue has been addressed in release version 0.8.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.
Mattermost versions 8.1.x before 8.1.10, 9.2.x before 9.2.6, 9.3.x before 9.3.2, and 9.4.x before 9.4.3 fail to correctly verify account ownership when switching from email to SAML authentication, allowing an authenticated attacker to take over other user accounts via a crafted switch request under specific conditions.
The All in One SEO WordPress plugin before 4.1.5.3 is affected by a Privilege Escalation issue, which was discovered during an internal audit by the Jetpack Scan team, and may grant bad actors access to protected REST API endpoints they shouldn’t have access to. This could ultimately enable users with low-privileged accounts, like subscribers, to perform remote code execution on affected sites.
Apache Guacamole 1.2.0 and 1.3.0 do not properly validate responses received from a SAML identity provider. If SAML support is enabled, this may allow a malicious user to assume the identity of another Guacamole user.
An Authentication Bypass vulnerability in the SAML Authentication component of BlackBerry Workspaces Server (deployed with Appliance-X) version(s) 10.1, 9.1 and earlier could allow an attacker to potentially gain access to the application in the context of the targeted user’s account.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.
A vulnerability was found in Ruijie RG-EW1200G 07161417 r483. It has been rated as critical. Affected by this issue is some unknown functionality of the file /api/sys/login. The manipulation leads to improper authentication. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-237518 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.
Improper authorization in some Zoom clients may allow an authorized user to conduct an escalation of privilege via network access.
** UNSUPPORTED WHEN ASSIGNED **An improper authentication vulnerability [CWE-287] in Fortinet FortiWAN version 5.2.0 through 5.2.1 and version 5.1.1 through 5.1.2 may allow an authenticated attacker to escalate his privileges via HTTP or HTTPs requests with crafted JWT token values.
Improper Authentication vulnerability in smp7, wp.Insider Simple Membership.This issue affects Simple Membership: from n/a through 4.3.4.
Improper access control in Citrix Workspace app for Windows 1912 CU1 and 2006.1 causes privilege escalation and code execution when the automatic updater service is running.
A vulnerability has been identified in SIPORT MP (All versions < 3.2.1). Vulnerable versions of the device could allow an authenticated attacker to impersonate other users of the system and perform (potentially administrative) actions on behalf of those users if the single sign-on feature ("Allow logon without password") is enabled.
Improper authentication vulnerability in multiple digital video recorders provided by TAKENAKA ENGINEERING CO., LTD. allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter the device settings.
An issue was discovered in Aviatrix Gateway before 6.6.5712 and 6.7.x before 6.7.1376. Because Gateway API functions mishandle authentication, an authenticated VPN user can inject arbitrary commands.
In Django User Sessions (django-user-sessions) before 1.7.1, the views provided allow users to terminate specific sessions. The session key is used to identify sessions, and thus included in the rendered HTML. In itself this is not a problem. However if the website has an XSS vulnerability, the session key could be extracted by the attacker and a session takeover could happen.
The logins command in HP-UX B.11.31, B.11.23, and B.11.11 does not correctly report password status, which allows remote attackers to obtain privileges when certain "password issues" are not detected.
Improper authentication in the SMA100 SSL-VPN virtual office portal allows a remote authenticated attacker to create an identical external domain user using accent characters, resulting in an MFA bypass.
Improper authentication vulnerability in the CBC products allows a remote authenticated attacker to execute an arbitrary OS command on the device or alter its settings. As for the affected products/versions, see the detailed information provided by the vendor. Note that NR4H, NR8H, NR16H series and DR-16F, DR-8F, DR-4F, DR-16H, DR-8H, DR-4H, DR-4M41 series are no longer supported, therefore updates for those products are not provided.
Warpgate is an SSH, HTTPS and MySQL bastion host for Linux that doesn't need special client apps. When logging in as a user with SSO enabled an attacker may authenticate as an other user. Any user account which does not have a second factor enabled could be compromised. This issue has been addressed in commit `8173f6512a` and in releases starting with version 0.7.3. Users are advised to upgrade. Users unable to upgrade should require their users to use a second factor in authentication.
The vulnerability allows a remote attacker to access sensitive data inside exported packages or obtain up to Remote Code Execution (RCE) with root privileges on the device. The vulnerability can be exploited directly by authenticated users, via crafted HTTP requests, or indirectly by unauthenticated users, by accessing already-exported backup packages, or crafting an import package and inducing an authenticated victim into sending the HTTP upload request.
Search Guard Kibana Plugin versions before 5.6.8-7 and before 6.x.y-12 had an issue that an authenticated Kibana user could impersonate as kibanaserver user when providing wrong credentials when all of the following conditions a-c are true: a) Kibana is configured to use Single-Sign-On as authentication method, one of Kerberos, JWT, Proxy, Client certificate. b) The kibanaserver user is configured to use HTTP Basic as the authentication method. c) Search Guard is configured to use an SSO authentication domain and HTTP Basic at the same time
Improper Authentication vulnerability in Pluggabl LLC Booster for WooCommerce allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Booster for WooCommerce: from n/a through 7.1.2.
A vulnerability exists in the Equipment Tag Out authentication, when configured with Single Sign-On (SSO) with password validation in T214. This vulnerability can be exploited by an authenticated user per-forming an Equipment Tag Out holder action (Accept, Release, and Clear) for another user and entering an arbitrary password in the holder action confirmation dialog box. Despite entering an arbitrary password in the confirmation box, the system will execute the selected holder action.
An issue was discovered in Cassia Access Controller 2.1.1.2303271039. The Web SSH terminal endpoint (spawned console) can be accessed without authentication. Specifically, there is no session cookie validation on the Access Controller; instead, there is only Basic Authentication to the SSH console.
Improper Authentication vulnerability in Snow Software AB Snow License Manager on Windows allows a networked attacker to perform an Authentication Bypass if Active Directory Authentication is enabled.This issue affects Snow License Manager: from 9.33.2 through 9.34.0.
Walchem Intuition 9 firmware versions prior to v4.21 are vulnerable to improper authentication. Login credentials are stored in a format that could allow an attacker to use them as-is to login and gain access to the device.