An Improper Input Validation issue was discovered in Rockwell Automation MicroLogix 1100 controllers 1763-L16BWA, 1763-L16AWA, 1763-L16BBB, and 1763-L16DWD. A remote, unauthenticated attacker could send a single, specially crafted Programmable Controller Communication Commands (PCCC) packet to the controller that could potentially cause the controller to enter a DoS condition.

Integer overflow in RNADiagnostics.dll in Rockwell Automation FactoryTalk Services Platform (FTSP) CPR9, CPR9-SR1, CPR9-SR2, CPR9-SR3, CPR9-SR4, CPR9-SR5, CPR9-SR5.1, and CPR9-SR6 allows remote attackers to cause a denial of service (service outage or RNADiagReceiver.exe daemon crash) via UDP data that specifies a large integer value.

An exploitable denial-of-service vulnerability exists in the IPv4 functionality of Allen-Bradley MicroLogix 1100 Programmable Logic Controller Systems Series B FRN 16.000, Series B FRN 15.002, Series B FRN 15.000, Series B FRN 14.000, Series B FRN 13.000, Series B FRN 12.000, Series B FRN 11.000 and Series B FRN 10.000. A specially crafted packet can cause a major error, resulting in a denial of service. An attacker can send a malicious packet to trigger this vulnerability.

A denial-of-service vulnerability exists in the Ethernet/IP server functionality of Rockwell Automation RSLinx Classic 2.57.00.14 CPR 9 SR 3. A specially crafted network request can lead to a denial of service. An attacker can send a sequence of malicious packets to trigger this vulnerability.

Due to a memory leak, a denial-of-service vulnerability exists in the Rockwell Automation affected products. A malicious actor could exploit this vulnerability by performing multiple actions on certain web pages of the product causing the affected products to become fully unavailable and require a power cycle to recover.

A malformed Class 3 common industrial protocol message with a cached connection can cause a denial-of-service condition in Rockwell Automation Logix Controllers, resulting in a major nonrecoverable fault. If the target device becomes unavailable, a user would have to clear the fault and redownload the user project file to bring the device back online.

FactoryTalk Linx versions 6.00, 6.10, and 6.11, RSLinx Classic v4.11.00 and prior,Connected Components Workbench: Version 12 and prior, ControlFLASH: Version 14 and later, ControlFLASH Plus: Version 1 and later, FactoryTalk Asset Centre: Version 9 and later, FactoryTalk Linx CommDTM: Version 1 and later, Studio 5000 Launcher: Version 31 and later Stud, 5000 Logix Designer software: Version 32 and prior is vulnerable. A vulnerability exists in the communication function that enables users to upload EDS files by FactoryTalk Linx. This may allow an attacker to upload a file with bad compression, consuming all the available CPU resources, leading to a denial-of-service condition.

CVE-2024-7515 IMPACT A denial-of-service vulnerability exists in the affected products. A malformed PTP management packet can cause a major nonrecoverable fault in the controller.

Where this vulnerability exists in the Rockwell Automation 1756-EN4* Ethernet/IP communication products, it could allow a malicious user to cause a denial of service by asserting the target system through maliciously crafted CIP messages.

CVE 2021-22681 https://www.rockwellautomation.com/en-us/trust-center/security-advisories/advisory.PN1550.html  and send a specially crafted CIP message to the device. If exploited, a threat actor could help prevent access to the legitimate user and end connections to connected devices including the workstation. To recover the controllers, a download is required which ends any process that the controller is running.

An input validation vulnerability exists in the Rockwell Automation 5015 - AENFTXT when a manipulated PTP packet is sent, causing the secondary adapter to result in a major nonrecoverable fault. If exploited, a power cycle is required to recover the product.

An unauthenticated attacker with network access to a victim's Rockwell Automation FactoryTalk Alarm and Events service could open a connection, causing the service to fault and become unavailable. The affected port could be used as a server ping port and uses messages structured with XML.

CVE-2024-45825 IMPACT A denial-of-service vulnerability exists in the affected products. The vulnerability occurs when a malformed CIP packet is sent over the network to the device and results in a major nonrecoverable fault causing a denial-of-service.

The device does not properly validate the data being sent to the buffer. An attacker can send a malformed CIP packet to Port 2222/TCP, Port 2222/UDP, Port 44818/TCP, or Port 44818/UDP, which creates a buffer overflow and causes the CPU to crash. Successful exploitation of this vulnerability could cause loss of availability and a disruption in communications with other connected devices. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

When an affected product receives a valid CIP message from an unauthorized or unintended source to Port 2222/TCP, Port 2222/UDP, Port 44818/TCP, or Port 44818/UDP that instructs the product to reset, a DoS can occur. This situation could cause loss of availability and a disruption of communication with other connected devices. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

An Improper Input Validation issue was discovered in Rockwell Automation FactoryTalk Alarms and Events, Version 2.90 and earlier. An unauthenticated attacker with remote access to a network with FactoryTalk Alarms and Events can send a specially crafted set of packets packet to Port 403/TCP (the history archiver service), causing the service to either stall or terminate.

An attacker-controlled memory allocation size can be passed to the C++ new operator in RnaDaSvr.dll by sending a specially crafted ConfigureItems message to TCP port 4241. This will cause an unhandled exception, resulting in termination of RSLinxNG.exe. Observed in FactoryTalk 6.11. All versions of FactoryTalk Linx are affected.

A Buffer Overflow issue was discovered in Rockwell Automation Allen-Bradley MicroLogix 1400 Controllers, Series B and C Versions 21.002 and earlier. The stack-based buffer overflow vulnerability has been identified, which may allow remote code execution.

Rockwell Automation MicroLogix 1400 Version 21.6 and below may allow a remote unauthenticated attacker to send a specially crafted Modbus packet allowing the attacker to retrieve or modify random values in the register. If successfully exploited, this may lead to a buffer overflow resulting in a denial-of-service condition. The FAULT LED will flash RED and communications may be lost. Recovery from denial-of-service condition requires the fault to be cleared by the user.

KEPServerEX is vulnerable to a buffer overflow which may allow an attacker to crash the product being accessed or leak information.

Buffer overflow vulnerability in the codec module Impact: Successful exploitation of this vulnerability may affect availability.

ASUS AC68U <=3.0.0.4.385.20852 is affected by a buffer overflow in blocking.cgi, which may cause a denial of service (DoS).

Buffer Overflow vulnerability in msoulier tftpy commit 467017b844bf6e31745138a30e2509145b0c529c allows a remote attacker to cause a denial of service via the parse function in the TftpPacketFactory class.

A buffer overflow vulnerability in the library "libclinkc" of the Zyxel VMG8825-T50K firmware version 5.50(ABOM.8)C0 could allow an unauthenticated attacker to cause denial of service (DoS) conditions by sending a crafted HTTP request to a vulnerable device.

The eglibc package before 2.14 incorrectly handled the getaddrinfo() function. An attacker could use this issue to cause a denial of service.

A heap buffer overflow in the XML Text Escaping component of Qualisys C++ SDK commit a32a21a allows attackers to cause Denial of Service (DoS) via escaping special XML characters.

Transient DOS may occur while processing the country IE.

Buffer Overflow vulnerability found in En3rgy WebcamServer v.0.5.2 allows a remote attacker to cause a denial of service via the WebcamServer.exe file.

Buffer overflow in NetRxPkt::ehdr_buf in hw/net/net_rx_pkt.c in QEMU (aka Quick Emulator), when the VLANSTRIP feature is enabled on the vmxnet3 device, allows remote attackers to cause a denial of service (out-of-bounds access and QEMU process crash) via vectors related to VLAN stripping.

In Memcached before 1.6.22, a buffer overflow exists when processing multiget requests in proxy mode, if there are many spaces after the "get" substring.

An issue was discovered in YottaDB through r1.32 and V7.0-000 and FIS GT.M through V7.0-000. Using crafted input, an attacker can cause a call to $Extract to force an signed integer holding the size of a buffer to take on a large negative number, which is then used as the length of a memcpy call that occurs on the stack, causing a buffer overflow.

Some Huawei products have a buffer error vulnerability. An unauthenticated, remote attacker could send specific MPLS Echo Request messages to the target products. Due to insufficient input validation of some parameters in the messages, successful exploit may cause the device to reset.

Serva 4.4.0 allows remote attackers to cause a denial of service (daemon crash) via a TFTP read (RRQ) request, aka opcode 1, a related issue to CVE-2013-0145.

Pinkie 2.15 allows remote attackers to cause a denial of service (daemon crash) via a TFTP read (RRQ) request, aka opcode 1.

A vulnerability has been identified in Opcenter Execution Foundation (All versions < V2407), Opcenter Quality (All versions < V2312), SIMATIC PCS neo (All versions < V4.1), SINEC NMS (All versions < V2.0 SP1), Totally Integrated Automation Portal (TIA Portal) V14 (All versions), Totally Integrated Automation Portal (TIA Portal) V15.1 (All versions), Totally Integrated Automation Portal (TIA Portal) V16 (All versions), Totally Integrated Automation Portal (TIA Portal) V17 (All versions < V17 Update 8), Totally Integrated Automation Portal (TIA Portal) V18 (All versions < V18 Update 3). The affected application contains an out of bounds write past the end of an allocated buffer when handling specific requests on port 4002/tcp and 4004/tcp. This could allow an attacker to crash the application. The corresponding service is auto-restarted after the crash.

The video framework has memory overwriting caused by addition overflow. Successful exploitation of this vulnerability may affect availability.

The video framework has memory overwriting caused by addition overflow. Successful exploitation of this vulnerability may affect availability.

A buffer overflow in modsecurity v3.0.12 allows attackers to cause a Denial of Service (DoS) via a crafted input inserted into the name parameter. NOTE: this is disputed by the Supplier because it cannot be reproduced. Also, the product's documentation indicates that it is not guaranteed to be usable with very large values of SecRequestBodyNoFilesLimit (which are required by the claimed issue).

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sProfileName parameter at wizfw.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

USG9500 with versions of V500R001C30;V500R001C60 have a denial of service vulnerability. Due to a flaw in the X.509 implementation in the affected products which can result in a large heap buffer overrun error, an attacker may exploit the vulnerability by a malicious certificate, resulting a denial of service on the affected products.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the extRadSrv2 parameter at cgiapp.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sCloudPass parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

A NULL pointer dereference in libcoap v4.3.5-rc2 and below allows a remote attacker to cause a denial of service via the coap_handle_request_put_block function in src/coap_block.c.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sSrvName parameter at service.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sProfileName parameter at fextobj.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the newProname parameter at v2x00.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.

Draytek Vigor 3910 v4.3.2.6 was discovered to contain a buffer overflow in the sPubKey parameter at dialin.cgi. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input.