NEC Univerge Sv9100 WebPro 6.00.00 devices have Cleartext Password Storage in the Web UI.

This vulnerability allows remote attackers to disclose sensitive information on affected installations of NEC ESMPRO Manager 6.42. Authentication is not required to exploit this vulnerability. The specific flaw exists within the GetEuaLogDownloadAction class. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to disclose information in the context of SYSTEM. Was ZDI-CAN-9607.

This vulnerability allows remote attackers to disclose sensitive information on affected installations of NEC ExpressCluster 4.1. Authentication is not required to exploit this vulnerability. The specific flaw exists within the clpwebmc executable. Due to the improper restriction of XML External Entity (XXE) references, a specially-crafted document specifying a URI causes the XML parser to access the URI and embed the contents back into the XML document for further processing. An attacker can leverage this vulnerability to disclose information in the context of SYSTEM. Was ZDI-CAN-10801.

Aspire-derived NEC PBXes operating InMail software, including all versions of SV8100, SV9100, SL1100 and SL2100 devices allow unauthenticated read-only access to voicemails, greetings, and voice response system content through a system's WebPro administration interface.

Improper authentication vulnerability in NEC Corporation Aterm WG1800HP4, WG1200HS3, WG1900HP2, WG1200HP3, WG1800HP3, WG1200HS2, WG1900HP, WG1200HP2, W1200EX(-MS), WG1200HS, WG1200HP, WF300HP2, W300P, WF800HP, WR8165N, WG2200HP, WF1200HP2, WG1800HP2, WF1200HP, WG600HP, WG300HP, WF300HP, WG1800HP, WG1400HP, WR8175N, WR9300N, WR8750N, WR8160N, WR9500N, WR8600N, WR8370N, WR8170N, WR8700N, WR8300N, WR8150N, WR4100N, WR4500N, WR8100N, WR8500N, CR2500P, WR8400N, WR8200N, WR1200H, WR7870S, WR6670S, WR7850S, WR6650S, WR6600H, WR7800H, WM3400RN, WM3450RN, WM3500R, WM3600R, WM3800R, WR8166N, MR01LN MR02LN, WG1810HP(JE) and WG1810HP(MF) all versions allows a attacker to view device information.

UNIVERGE DT 820 V3.2.7.0 and prior, UNIVERGE DT 830 V5.2.7.0 and prior, UNIVERGE DT 930 V2.4.0.0 and prior, IP Phone Manager V8.9.1 and prior, Data Maintenance Tool for DT900 Series V5.3.0.0 and prior, Data Maintenance Tool for DT800 Series V4.2.0.0 and prior allows a remote attacker who can access to the internal network, the configuration information may be obtained.

Improper access control vulnerability in NEC Aterm WG2600HS firmware Ver1.5.1 and earlier, and Aterm WX3000HP firmware Ver1.1.2 and earlier allows a device connected to the LAN side to be accessed from the WAN side due to the defect in the IPv6 firewall function.

Improper input validation vulnerability in the Transaction Server CLUSTERPRO X 4.3 for Windows and earlier, EXPRESSCLUSTER X 4.3 for Windows and earlier, CLUSTERPRO X 4.3 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 4.3 SingleServerSafe for Windows and earlier allows attacker to read files upload via network..

NEC Univerge Sv9100 WebPro 6.00.00 devices have Predictable Session IDs that result in Account Information Disclosure via Home.htm?sessionId=#####&GOTO(8) URIs.

Incorrect implementation of authentication algorithm issue in UNIVERGE SV9500 series from V1 to V7and SV8500 series from S6 to S8 allows an attacker to access the remote system maintenance feature and obtain the information by sending a specially crafted request to a specific URL.

The Open Connectivity Foundation UPnP specification before 2020-04-17 does not forbid the acceptance of a subscription request with a delivery URL on a different network segment than the fully qualified event-subscription URL, aka the CallStranger issue.

Weak File and Folder Permissions vulnerability in CLUSTERPRO X 5.0 for Windows and earlier, EXPRESSCLUSTER X 5.0 for Windows and earlier, CLUSTERPRO X 5.0 SingleServerSafe for Windows and earlier, EXPRESSCLUSTER X 5.0 SingleServerSafe for Windows and earlier allows a remote unauthenticated attacker to overwrite existing files on the file system and to potentially execute arbitrary code.

Dell Wyse ThinOS 8.6 and prior versions contain an insecure default configuration vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability to gain access to the sensitive information on the local network, leading to the potential compromise of impacted thin clients.

In JetBrains Kotlin before 1.4.21, a vulnerable Java API was used for temporary file and folder creation. An attacker was able to read data from such files and list directories due to insecure permissions.

In Mahara before 20.10.5, 21.04.4, 21.10.2, and 22.04.0, a site using Isolated Institutions is vulnerable if more than ten groups are used. They are all shown from page 2 of the group results list (rather than only being shown for the institution that the viewer is a member of).

GitLab EE 8.9 and later through 12.7.2 has Insecure Permission

In Nintex Automation 5.6 and 5.7 before 5.8, the K2 SmartForms Designer folder has configuration files (web.config) containing passwords that are readable by unauthorized users.

In JetBrains YouTrack before 2020.4.4701, an attacker could enumerate users via the REST API without appropriate permissions.

An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). The intermediate-level directories of the filesystem cache had the system's standard umask rather than 0o077.

An issue was discovered in Django 2.2 before 2.2.16, 3.0 before 3.0.10, and 3.1 before 3.1.1 (when Python 3.7+ is used). FILE_UPLOAD_DIRECTORY_PERMISSIONS mode was not applied to intermediate-level directories created in the process of uploading files. It was also not applied to intermediate-level collected static directories when using the collectstatic management command.

SICK Package Analytics software up to and including version V04.0.0 are vulnerable due to incorrect default permissions settings. An unauthorized attacker could read sensitive data from the system by querying for known files using the REST API directly.

A vulnerability in the web-based management interface of Cisco Vision Dynamic Signage Director could allow an unauthenticated, remote attacker to view potentially sensitive information on an affected device. The vulnerability is due to incorrect permissions within Apache configuration. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web-based management interface. A successful exploit could allow the attacker to view potentially sensitive information on the affected device.

Access bypass vulnerability in of Drupal Core Workspaces allows an attacker to access data without correct permissions. The Workspaces module doesn't sufficiently check access permissions when switching workspaces, leading to an access bypass vulnerability. An attacker might be able to see content before the site owner intends people to see the content. This vulnerability is mitigated by the fact that sites are only vulnerable if they have installed the experimental Workspaces module. This issue affects Drupal Core8.8.X versions prior to 8.8.10; 8.9.X versions prior to 8.9.6; 9.0.X versions prior to 9.0.6.

Joomla Guru extension 5.2.5 is affected by: Insecure Permissions. The impact is: obtain sensitive information (remote). The component is: Access to private information and components, possibility to view other users' information. Information disclosure Access to private information and components, possibility to view other users' information.

pgAdmin <= 8.8 has an installation Directory permission issue. Because of this issue, attackers can gain unauthorised access to the installation directory on the Debian or RHEL 8 platforms.

openITCOCKPIT through 3.7.2 allows remote attackers to configure the self::DEVELOPMENT or self::STAGING option by placing a hostname containing "dev" or "staging" in the HTTP Host header.

An issue has been discovered in GitLab affecting all versions starting from 12.4 before 14.10.5, all versions starting from 15.0 before 15.0.4, all versions starting from 15.1 before 15.1.1. GitLab was leaking Conan packages names due to incorrect permissions verification.

Sonatype Nexus Repository Manager before 3.17.0 has a weak default of giving any unauthenticated user read permissions on the repository files and images.

SAP Commerce Cloud, versions- 1808,1811,1905,2005, allows an attacker to bypass existing authentication and permission checks via the '/medias' endpoint hence gaining access to Secure Media folders. This folder could contain sensitive files that results in disclosure of sensitive information and impact system configuration confidentiality.

A User enumeration vulnerability in AquilaCMS 1.409.20 and prior allows unauthenticated attackers to obtain email addresses via the "Add a user" feature. The vulnerability occurs due to insufficiently validated user input being processed as a regular expression, which is then matched against email addresses to find duplicate entries.

A discrepancy between responses for valid and invalid e-mail accounts in the Forgot your Login? module of eSoft Planner 3.24.08271-USA allows attackers to enumerate valid user e-mail accounts.

Insecure permissions (777) are set on $HOME/.singularity when it is newly created by Singularity (version from 3.3.0 to 3.5.1), which could lead to an information leak, and malicious redirection of operations performed against Sylabs cloud services.

handler/upload_handler.jsp in DEXT5 Editor through 3.5.1402961 allows an attacker to download arbitrary files via the savefilepath field.

Insufficient permission checks in scheduled pipeline API in GitLab CE/EE 13.0+ allows an attacker to read variable names and values for scheduled pipelines on projects visible to the attacker. Affected versions are >=13.0, <13.3.9,>=13.4.0, <13.4.5,>=13.5.0, <13.5.2.

In JetBrains TeamCity before 2019.1.2, secure values could be exposed to users with the "View build runtime parameters and data" permission.

XWiki AdminTools integrates administrative tools for managing a running XWiki instance. Prior to version 1.1, users without admin rights have access to AdminTools.SpammedPages. View rights are not restricted only to admin users for AdminTools.SpammedPages. While no data is visible to non admin users, the page is still accessible. This issue has been patched in version 1.1. A workaround involves setting the view rights for the AdminTools space to be only available for the XWikiAdminGroup.

The Anonymous Restricted Content plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.6.5 via the WordPress core search feature. This makes it possible for unauthenticated attackers to extract sensitive data from posts that have been restricted to logged-in users.

The Simple Membership plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 4.5.5 via the WordPress core search feature. This makes it possible for unauthenticated attackers to extract sensitive data from posts that have been restricted to higher-level roles such as administrator.

Contao 4.0 through 4.8.5 has Insecure Permissions. Back end users can manipulate the details view URL to show pages and articles that have not been enabled for them.

Permission verification vulnerability in the lock screen module. Impact: Successful exploitation of this vulnerability will affect availability.

HwSEServiceAPP has a vulnerability in permission management. Successful exploitation of this vulnerability may cause disclosure of the Card Production Life Cycle (CPLC) information.

A flaw in Node.js's permission model allows a file's access and modification timestamps to be changed via `futimes()` even when the process has only read permissions. Unlike `utimes()`, `futimes()` does not apply the expected write-permission checks, which means file metadata can be modified in read-only directories. This behavior could be used to alter timestamps in ways that obscure activity, reducing the reliability of logs. This vulnerability affects users of the permission model on Node.js v20, v22, v24, and v25.

Discourse is an open source platform for community discussion. In stable versions prior to 2.8.3 and beta versions prior 2.9.0.beta4 erroneously expose groups. When a group with restricted visibility has been used to set the permissions of a category, the name of the group is leaked to any user that is able to see the category. To workaround the problem, a site administrator can remove groups with restricted visibility from any category's permissions setting.

An issue was discovered in MediaWiki before 1.35.5, 1.36.x before 1.36.3, and 1.37.x before 1.37.1. It is possible to use action=edit&undo= followed by action=mcrundo and action=mcrrestore to view private pages on a private wiki that has at least one page set in $wgWhitelistRead.

Insecure permissions in the file database.sdb of BatFlat CMS v1.3.6 allows attackers to dump the entire database.

The Nextcloud Android app is the Android client for Nextcloud, a self-hosted productivity platform. An issue in versions prior to 3.17.1 may lead to sensitive information disclosure. An unauthorized app that does not have the otherwise required `MANAGE_DOCUMENTS` permission may view image thumbnails for images it does not have permission to view. Version 3.17.1 contains a patch. There are no known workarounds.

There is a Vulnerability of obtaining broadcast information improperly due to improper broadcast permission settings in Smartphones.Successful exploitation of this vulnerability may affect service confidentiality.

There is a permission control vulnerability in the PMS module. Successful exploitation of this vulnerability can lead to sensitive system information being obtained without authorization.

The cellular module has a vulnerability in permission management. Successful exploitation of this vulnerability may affect data confidentiality.