A vulnerability was detected in UTT HiPER 520 1.7.7-160105. Affected is the function sub_44EFB4 of the file /goform/formReleaseConnect of the component Web Management Interface. The manipulation of the argument Isp_Name results in os command injection. The attack can be launched remotely. The exploit is now public and may be used.

A security vulnerability has been detected in UTT HiPER 520 1.7.7-160105. This impacts the function sub_44D264 of the file /goform/formPdbUpConfig of the component Web Management Interface. The manipulation of the argument policyNames leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.

A vulnerability was determined in UTT 进取 521G 3.1.1-190816. The impacted element is the function sub_446B18 of the file /goform/formPdbUpConfig. Executing a manipulation of the argument policyNames can lead to os command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized.

gl-inet GL-MT300N-V2 Mango v3.212 and GL-AX1800 Flint v3.214 were discovered to contain multiple command injection vulnerabilities via the ping_addr and trace_addr function parameters.

A command injection vulnerability was identified in TP-Link TL-WR802N v4, TL-WR841N v14, and TL-WR840N v6 due to improper neutralization of special elements used in an OS command. In the router configuration import function allows an authenticated attacker to upload a crafted configuration file that results in execution of OS commands with root privileges during port-trigger processing. Successful exploitation allows an authenticated attacker to execute system commands with root privileges, leading to full device compromise.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to execute persistent code at boot time and break the chain of trust. This vulnerability is due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit this vulnerability by installing code to a specific directory in the underlying operating system (OS) and setting a specific ROMMON variable. A successful exploit could allow the attacker to execute persistent code on the underlying OS. To exploit this vulnerability, the attacker would need access to the root shell on the device or have physical access to the device.

In Splunk Enterprise versions below 9.4.3, 9.3.5, 9.2.7, and 9.1.10, a user who holds a role that contains the high-privilege capability `edit_scripted` and `list_inputs` capability , could perform a remote command execution due to improper user input sanitization on the scripted input files.<br><br>See [Define roles on the Splunk platform with capabilities](https://docs.splunk.com/Documentation/Splunk/latest/Security/Rolesandcapabilities) and [Setting up a scripted input ](https://docs.splunk.com/Documentation/Splunk/9.4.2/AdvancedDev/ScriptSetup)for more information.

OS Command Injection Remote Code Execution Vulnerability in API in Progress LoadMaster allows an authenticated attacker with “User Administration” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in the API input parameters

OS Command Injection Remote Code Execution Vulnerability in API in Progress LoadMaster allows an authenticated attacker with “User Administration” permissions to execute arbitrary commands on the LoadMaster appliance by exploiting unsanitized input in the API input parameters

A post-authentication command injection vulnerability in the CGI program in the Zyxel GS1900-48 switch firmware version V2.80(AAHN.1)C0 and earlier could allow an authenticated, LAN-based attacker with administrator privileges to execute some operating system (OS) commands on an affected device by sending a crafted HTTP request.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "eMinute" parameter in setWiFiScheduleCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "week" parameter in setWiFiScheduleCfg.

An issue in TOTOLINK-CX-A3002RU V1.0.4-B20171106.1512 and TOTOLINK-CX-N150RT V2.1.6-B20171121.1002 and TOTOLINK-CX-N300RT V2.1.6-B20170724.1420 and TOTOLINK-CX-N300RT V2.1.8-B20171113.1408 and TOTOLINK-CX-N300RT V2.1.8-B20191010.1107 and TOTOLINK-CX-N302RE V2.0.2-B20170511.1523 allows a remote attacker to execute arbitrary code via the /boafrm/formSysCmd component.

Multiple TP-LINK products allow a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by restoring a crafted backup file. The affected device, with the initial configuration, allows login only from the LAN port or Wi-Fi.

OS command injection vulnerability in WRC-X5400GS-B v1.0.10 and earlier, and WRC-X5400GSA-B v1.0.10 and earlier allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product.

Netgear EX6120 v1.0.0.68, Netgear EX6100 v1.0.2.28, and Netgear EX3700 v1.0.0.96 are vulnerable to command injection in operating_mode.cgi via the ap_mode parameter.

IBM Security Directory Integrator 7.2.0 through 7.2.0.13 and 10.0.0 through 10.0.3 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product. Note that WMC-X1800GST-B is also included in e-Mesh Starter Kit "WMC-2LX-B".

Active debug code exists in Yamaha wireless LAN access point devices. If a logged-in user who knows how to use the debug function accesses the device's management page, this function can be enabled by performing specific operations. As a result, an arbitrary OS command may be executed and/or configuration settings of the device may be altered. Affected products and versions are as follows: WLX222 firmware Rev.24.00.03 and earlier, WLX413 firmware Rev.22.00.05 and earlier, WLX212 firmware Rev.21.00.12 and earlier, WLX313 firmware Rev.18.00.12 and earlier, and WLX202 firmware Rev.16.00.18 and earlier.

OS command injection vulnerability in ELECOM wireless LAN routers allows a network-adjacent attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to the product.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in setLedCfg. Authenticated Attackers can send malicious packet to execute arbitrary commands.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the iface parameter in the vif_disable function.

Multiple authenticated operating system (OS) command injection vulnerabilities exist in Firewalla Box Software versions before 1.979. A physically close attacker that is authenticated to the Bluetooth Low-Energy (BTLE) interface can use the network configuration service to inject commands in various configuration parameters including networkConfig.Interface.Phy.Eth0.Extra.PingTestIP, networkConfig.Interface.Phy.Eth0.Extra.DNSTestDomain, and networkConfig.Interface.Phy.Eth0.Gateway6. Additionally, because the configuration can be synced to the Firewalla cloud, the attacker may be able to persist access even after hardware resets and firmware re-flashes.

TOTOLINK A6000R V1.0.1-B20201211.2000 was discovered to contain a command injection vulnerability via the ifname parameter in the apcli_do_enr_pin_wps function.

LOGITEC LAN-W300N/PGRB allows an attacker with administrative privilege to execute arbitrary OS commands via unspecified vectors.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "desc" parameter in setWiFiScheduleCfg.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

Improper Input Validation vulnerability of Authenticated User in Progress LoadMaster allows : OS Command Injection. This issue affects:  Product Affected Versions LoadMaster From 7.2.55.0 to 7.2.60.1 (inclusive)    From 7.2.49.0 to 7.2.54.12 (inclusive)    7.2.48.12 and all prior versions ECS All prior versions to 7.2.60.1 (inclusive)

OS command injection vulnerability in WRC-X3000GSN v1.0.2, WRC-X3000GS v1.0.24 and earlier, and WRC-X3000GSA v1.0.24 and earlier allows a network-adjacent attacker with an administrative privilege to execute an arbitrary OS command by sending a specially crafted request to the product.

VR-S1000 firmware Ver. 2.37 and earlier allows an attacker with access to the product's web management page to execute arbitrary OS commands.

This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of D-Link DIR-1935 1.03 routers. Although authentication is required to exploit this vulnerability, the existing authentication mechanism can be bypassed. The specific flaw exists within the handling of SetIPv4FirewallSettings requests to the web management portal. When parsing subelements within the IPv4FirewallRule element, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-16146.

A vulnerability in the TFTP client of Zyxel GS1900 series firmware, XGS1210 series firmware, and XGS1250 series firmware, which could allow an authenticated LAN user to execute arbitrary OS commands via the GUI of the vulnerable device.

OS command injection vulnerability in Buffalo network devices allows a network-adjacent attacker with an administrative privilege to execute an arbitrary OS command if a specially crafted request is sent to a specific CGI program.

Due to an OS Command Injection vulnerability in SAP Business Connector, an authenticated attacker with administrative access and adjacent network access could upload specially crafted content to the server. If processed by the application, this content enables execution of arbitrary operating system commands. Successful exploitation could lead to full compromise of the system�s confidentiality, integrity, and availability.

DrayTek Vigor3910 devices through 4.3.2.6 are affected by an OS command injection vulnerability that allows an attacker to leverage the recvCmd binary to escape from the emulated instance and inject arbitrary commands into the host machine.

OS command injection vulnerability exists in ELECOM wireless LAN routers. A specially crafted request may be sent to the affected product by a logged-in user with an administrative privilege to execute an arbitrary OS command.

RFNTPS firmware versions System_01000004 and earlier, and Web_01000004 and earlier allow an attacker on the same network segment to execute arbitrary OS commands with a root privilege via unspecified vectors.

ELECOM LAN routers (WRH-733GBK firmware v1.02.9 and prior and WRH-733GWH firmware v1.02.9 and prior) allows a network-adjacent attacker with an administrator privilege to execute arbitrary OS commands via unspecified vectors.

LOGITEC LAN-W300N/PGRB allows an attacker with administrative privilege to execute arbitrary OS commands via unspecified vectors.

ELECOM LAN routers (WRH-733GBK firmware v1.02.9 and prior and WRH-733GWH firmware v1.02.9 and prior) allows a network-adjacent attacker with an administrator privilege to execute arbitrary OS commands via unspecified vectors.

There is a command injection vulnerability in ZTE MF258 Pro product. Due to insufficient validation of Ping Diagnosis interface parameter, an authenticated attacker could use the vulnerability to execute arbitrary commands.

ELECOM WRC-300FEBK-S allows an attacker with administrator rights to execute arbitrary OS commands via unspecified vectors.

A potential command injection vulnerability has been identified in the Poly Clariti Manager for versions prior to 10.12.2. The vulnerability could allow a privileged user to submit arbitrary input. HP has addressed the issue in the latest software update.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.34, R7500v2 before 1.0.3.26, R7800 before 1.0.2.42, R8900 before 1.0.3.10, R9000 before 1.0.3.10, WNDR4300v2 before 1.0.0.54, and WNDR4500v3 before 1.0.0.54.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects D7800 before 1.0.1.28, R6700 before 1.0.1.44, R6900 before 1.0.1.44, R7000 before 1.0.9.28, R7500v2 before 1.0.3.24, R7800 before 1.0.2.38, R9000 before 1.0.2.52, WNDR4300v2 before 1.0.0.50, and WNDR4500v3 before 1.0.0.50.

NETGEAR R7800 devices before 1.0.2.60 are affected by command injection by an authenticated user.