Zoho ManageEngine SharePoint Manager Plus before 4329 allows account takeover because authorization is mishandled.

Vulnerability of incomplete read and write permission verification in the GPU module. Successful exploitation of this vulnerability may affect service confidentiality, integrity, and availability.

Vulnerability of incomplete read and write permission verification in the GPU module. Successful exploitation of this vulnerability may affect service confidentiality, integrity, and availability.

An authorization bypass vulnerability in Monitorr v1.7.6m in Monitorr/assets/config/_installation/_register.php allows an unauthorized person to create valid credentials.

A vulnerability in the web management interface of Cisco Prime License Manager (PLM) Software could allow an unauthenticated, remote attacker to gain unauthorized access to an affected device. The vulnerability is due to insufficient validation of user input on the web management interface. An attacker could exploit this vulnerability by submitting a malicious request to an affected system. An exploit could allow the attacker to gain administrative-level privileges on the system. The attacker needs a valid username to exploit this vulnerability.

In BlackBerry QNX Software Development Platform (SDP) 6.6.0, an elevation of privilege vulnerability in the default configuration of the QNX SDP with QNet enabled on networks comprising two or more QNet nodes could allow an attacker to access local and remote files or take ownership of files on other QNX nodes regardless of permissions by executing commands targeting arbitrary nodes from a secondary QNX 6.6.0 QNet node.

Mastodon before 3.3.2 and 3.4.x before 3.4.6 has incorrect access control because it does not compact incoming signed JSON-LD activities. (JSON-LD signing has been supported since version 1.6.0.)

A traffic classification vulnerability in Juniper Networks Junos OS on the SRX Series Services Gateways may allow an attacker to bypass Juniper Deep Packet Inspection (JDPI) rules and access unauthorized networks or resources, when 'no-syn-check' is enabled on the device. While JDPI correctly classifies out-of-state asymmetric TCP flows as the dynamic-application UNKNOWN, this classification is not provided to the policy module properly and hence traffic continues to use the pre-id-default-policy, which is more permissive, causing the firewall to allow traffic to be forwarded that should have been denied. This issue only occurs when 'set security flow tcp-session no-syn-check' is configured on the device. This issue affects Juniper Networks Junos OS on SRX Series: 18.4 versions prior to 18.4R2-S10, 18.4R3-S10; 19.1 versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R2-S2, 21.1R3; 21.2 versions prior to 21.2R2. This issue does not affect Juniper Networks Junos OS versions prior to 18.4R1.

Zulip is an open-source team collaboration tool with topic-based threading. Zulip Server version 2.0.0 and above are vulnerable to insufficient access control with multi-use invitations. A Zulip Server deployment which hosts multiple organizations is vulnerable to an attack where an invitation created in one organization (potentially as a role with elevated permissions) can be used to join any other organization. This bypasses any restrictions on required domains on users' email addresses, may be used to gain access to organizations which are only accessible by invitation, and may be used to gain access with elevated privileges. This issue has been patched in release 4.10. There are no known workarounds for this issue. ### Patches _Has the problem been patched? What versions should users upgrade to?_ ### Workarounds _Is there a way for users to fix or remediate the vulnerability without upgrading?_ ### References _Are there any links users can visit to find out more?_ ### For more information If you have any questions or comments about this advisory, you can discuss them on the [developer community Zulip server](https://zulip.com/developer-community/), or email the [Zulip security team](mailto:security@zulip.com).

An issue was discovered on Samsung mobile devices with O(8.x), P(9.0), and Q(10.0) software. The persona service allows attackers (who control an unprivileged SecureFolder process) to bypass admin restrictions in KnoxContainer. The Samsung ID is SVE-2020-18133 (August 2020).

Portainer 1.24.1 and earlier is affected by incorrect access control that may lead to remote arbitrary code execution. The restriction checks for bind mounts are applied only on the client-side and not the server-side, which can lead to spawning a container with bind mount. Once such a container is spawned, it can be leveraged to break out of the container leading to complete Docker host machine takeover.

White Shark System (WSS) 1.3.2 is vulnerable to unauthorized access via user_edit_password.php, remote attackers can modify the password of any user.

Incorrect Access Control in Lin-CMS-Flask v0.1.1 allows remote attackers to obtain sensitive information and/or gain privileges due to the application not invalidating a user's authentication token upon logout, which allows for replaying packets.

Users Account Pre-Takeover or Users Account Takeover. in GitHub repository microweber/microweber prior to 1.2.15. Victim Account Take Over. Since, there is no email confirmation, an attacker can easily create an account in the application using the Victim’s Email. This allows an attacker to gain pre-authentication to the victim’s account. Further, due to the lack of proper validation of email coming from Social Login and failing to check if an account already exists, the victim will not identify if an account is already existing. Hence, the attacker’s persistence will remain. An attacker would be able to see all the activities performed by the victim user impacting the confidentiality and attempt to modify/corrupt the data impacting the integrity and availability factor. This attack becomes more interesting when an attacker can register an account from an employee’s email address. Assuming the organization uses G-Suite, it is much more impactful to hijack into an employee’s account.

<p>An elevation of privilege vulnerability exists in the way Azure Functions validate access keys.</p> <p>An unauthenticated attacker who successfully exploited this vulnerability could invoke an HTTP Function without proper authorization.</p> <p>This security update addresses the vulnerability by correctly validating access keys used to access HTTP Functions.</p>

In CWP (aka Control Web Panel or CentOS Web Panel) before 0.9.8.1107, attackers can make a crafted request to api/?api=add_server&DHCP= to add an authorized_keys text file in the /resources/ folder.

Apache Solr versions 6.6.0 to 6.6.6, 7.0.0 to 7.7.3 and 8.0.0 to 8.6.2 prevents some features considered dangerous (which could be used for remote code execution) to be configured in a ConfigSet that's uploaded via API without authentication/authorization. The checks in place to prevent such features can be circumvented by using a combination of UPLOAD/CREATE actions.

The Login Security module 6.x-1.x before 6.x-1.3 and 7.x-1.x before 7.x-1.3 for Drupal allows attackers to bypass intended restrictions via a crafted username.

Wire is an open source secure messenger. In affected versions if the an attacker gets an old but valid access token they can take over an account by changing the email. This issue has been resolved in version 3.86 which uses a new endpoint which additionally requires an authentication cookie. See wire-ios-sync-engine and wire-ios-transport references. This is the root advisory that pulls the changes together.

In Unisys Stealth 3.4.x, 4.x and 5.x before 5.0.026, if certificate-based authorization is used without HTTPS, an endpoint could be authorized without a private key.

Teleport provides connectivity, authentication, access controls and audit for infrastructure. Community Edition versions before and including 17.5.1 are vulnerable to remote authentication bypass. At time of posting, there is no available open-source patch.

Incorrect Authorization vulnerability in Micro Focus Container Deployment Foundation component affects products: - Hybrid Cloud Management. Versions 2018.05 to 2019.11. - ArcSight Investigate. versions 2.4.0, 3.0.0 and 3.1.0. - ArcSight Transformation Hub. versions 3.0.0, 3.1.0, 3.2.0. - ArcSight Interset. version 6.0.0. - ArcSight ESM (when ArcSight Fusion 1.0 is installed). version 7.2.1. - Service Management Automation (SMA). versions 2018.05 to 2020.02 - Operation Bridge Suite (Containerized). Versions 2018.05 to 2020.02. - Network Operation Management. versions 2017.11 to 2019.11. - Data Center Automation Containerized. versions 2018.05 to 2019.11 - Identity Intelligence. versions 1.1.0 and 1.1.1. The vulnerability could be exploited to provide unauthorized access to the Container Deployment Foundation.

Authentication Bypass vulnerability in D-Link DIR-885L FW102b01 allows remote attackers to gain escalated privileges via phpcgi. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered in SMA Solar Technology products. A secondary authentication system is available for Installers called the Grid Guard system. This system uses predictable codes, and a single Grid Guard code can be used on any SMA inverter. Any such code, when combined with the installer account, allows changing very sensitive parameters. NOTE: the vendor reports that Grid Guard is not an authentication feature; it is only a tracing feature. Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

Google Chrome before 25.0.1364.97 on Windows and Linux, and before 25.0.1364.99 on Mac OS X, does not properly enforce a user gesture requirement before proceeding with a file download, which might make it easier for remote attackers to execute arbitrary code via a crafted file.

BMC Server Automation before 8.9.01 patch 1 allows Process Spawner command execution because of authentication bypass.

OneFuzz is an open source self-hosted Fuzzing-As-A-Service platform. Starting with OneFuzz 2.12.0 or greater, an incomplete authorization check allows an authenticated user from any Azure Active Directory tenant to make authorized API calls to a vulnerable OneFuzz instance. To be vulnerable, a OneFuzz deployment must be both version 2.12.0 or greater and deployed with the non-default --multi_tenant_domain option. This can result in read/write access to private data such as software vulnerability and crash information, security testing tools and proprietary code and symbols. Via authorized API calls, this also enables tampering with existing data and unauthorized code execution on Azure compute resources. This issue is resolved starting in release 2.31.0, via the addition of application-level check of the bearer token's `issuer` against an administrator-configured allowlist. As a workaround users can restrict access to the tenant of a deployed OneFuzz instance < 2.31.0 by redeploying in the default configuration, which omits the `--multi_tenant_domain` option.

In Dialer, there is a possible way to manipulate visual voicemail settings due to a missing permission check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation.Product: AndroidVersions: Android-12LAndroid ID: A-186405146

IBM WebSphere Application Server (WAS) 6.1 before 6.1.0.47, 7.0 before 7.0.0.29, 8.0 before 8.0.0.6, and 8.5 before 8.5.0.2 on Linux, Solaris, and HP-UX, when a Local OS registry is used, does not properly validate user accounts, which allows remote attackers to bypass intended access restrictions via unspecified vectors.

An Access Control issue discovered in Extreme Networks Switch Engine (EXOS) before 32.5.1.5, also fixed in 22.7, 31.7.2 allows attackers to gain escalated privileges using crafted telnet commands via Redis server.

An exploitable improper authorization vulnerability exists in miner_setEtherbase API of cpp-ethereum's JSON-RPC (commit 4e1015743b95821849d001618a7ce82c7c073768). A JSON request can cause an access to the restricted functionality resulting in authorization bypass.

An exploitable improper authorization vulnerability exists in miner_start API of cpp-ethereum's JSON-RPC (commit 4e1015743b95821849d001618a7ce82c7c073768). A JSON request can cause an access to the restricted functionality resulting in authorization bypass. An attacker can send JSON to trigger this vulnerability.

An exploitable improper authorization vulnerability exists in miner_stop API of cpp-ethereum's JSON-RPC (commit 4e1015743b95821849d001618a7ce82c7c073768). An attacker can send JSON to trigger this vulnerability.

An exploitable improper authorization vulnerability exists in admin_addPeer API of cpp-ethereum's JSON-RPC (commit 4e1015743b95821849d001618a7ce82c7c073768). A JSON request can cause an access to the restricted functionality resulting in authorization bypass. An attacker can send JSON to trigger this vulnerability.

An exploitable improper authorization vulnerability exists in admin_nodeInfo API of cpp-ethereum's JSON-RPC (commit 4e1015743b95821849d001618a7ce82c7c073768). A JSON request can cause an access to the restricted functionality resulting in authorization bypass. An attacker can send JSON to trigger this vulnerability.

An exploitable improper authorization vulnerability exists in miner_setGasPrice API of cpp-ethereum's JSON-RPC (commit 4e1015743b95821849d001618a7ce82c7c073768). A JSON request can cause an access to the restricted functionality resulting in authorization bypass. An attacker can send JSON to trigger this vulnerability.

This improper access control vulnerability allows remote attackers to gain unauthorized access to the system. To fix these vulnerabilities, QNAP recommend updating Photo Station to their latest versions.

Canonical snapd before version 2.37.1 incorrectly performed socket owner validation, allowing an attacker to run arbitrary commands as root. This issue affects: Canonical snapd versions prior to 2.37.1.

Veritas APTARE versions prior to 10.5 did not perform adequate authorization checks. This vulnerability could allow for remote code execution by an unauthenticated user.

Incorrect Authorization vulnerability in Artbees JupiterX Core allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects JupiterX Core: from n/a through 3.3.8.

A security vulnerability in MICS Admin Portal in Ivanti MobileIron Sentry versions 9.18.0 and below, which may allow an attacker to bypass authentication controls on the administrative interface due to an insufficiently restrictive Apache HTTPD configuration.

Authentication Bypass vulnerability in D-Link DIR-859 FW105b03 allows remote attackers to gain escalated privileges via via phpcgi_main. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Authentication Bypass vulnerability in D-Link DIR-895 FW102b07 allows remote attackers to gain escalated privileges via via function phpcgi_main in cgibin. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

VMware Aria Operations for Logs contains an authentication bypass vulnerability. An unauthenticated, malicious actor can inject files into the operating system of an impacted appliance which can result in remote code execution.

Sealos is an open source cloud operating system distribution based on the Kubernetes kernel. In versions of Sealos prior to 4.2.1-rc4 an improper configuration of role based access control (RBAC) permissions resulted in an attacker being able to obtain cluster control permissions, which could control the entire cluster deployed with Sealos, as well as hundreds of pods and other resources within the cluster. This issue has been addressed in version 4.2.1-rc4. Users are advised to upgrade. There are no known workarounds for this vulnerability.

In JetBrains TeamCity before 2023.05 bypass of permission checks allowing to perform admin actions was possible

The Linux DVS server component of Mitel MiVoice Connect through 19.3 SP2 (22.24.1500.0) could allow an unauthenticated attacker with internal network access to execute arbitrary scripts due to improper access control.

Milesight NCR/camera version 71.8.0.6-r5 allows authentication bypass through an unspecified method.

Insufficient policy enforcement in iframe sandbox in Google Chrome prior to 96.0.4664.45 allowed a remote attacker to bypass navigation restrictions via a crafted HTML page.

Incorrect Authorization vulnerability in Apache Software Foundation Apache IoTDB.This issue affects the iotdb-web-workbench component on 0.13.3. iotdb-web-workbench is an optional component of IoTDB, providing a web console of the database. This problem is fixed from version 0.13.4 of iotdb-web-workbench onwards.