In OrangeHRM 4.3.1 and before, there is an input validation error within admin/listMailConfiguration (txtSendmailPath parameter) that allows authenticated attackers to achieve arbitrary command execution.

In Pulse Secure Pulse Connect Secure version 9.0RX before 9.0R3.4, 8.3RX before 8.3R7.1, 8.2RX before 8.2R12.1, and 8.1RX before 8.1R15.1 and Pulse Policy Secure version 9.0RX before 9.0R3.2, 5.4RX before 5.4R7.1, 5.3RX before 5.3R12.1, 5.2RX before 5.2R12.1, and 5.1RX before 5.1R15.1, the admin web interface allows an authenticated attacker to inject and execute commands.

Possible Command Injection in iManager GET parameter has been discovered in OpenText™ iManager 3.2.6.0000.

Multiple improper neutralization of special elements used in an OS Command ('OS Command Injection') vulnerabilities [CWE-78] in FortiWeb version 7.0.1 and below, 6.4 all versions, version 6.3.19 and below may allow an authenticated attacker to execute unauthorized code or commands via crafted parameters of HTTP requests.

A privilege escalation vulnerability exists in SolarWinds Serv-U before 15.1.7 for Linux.

A vulnerability in the IBM TS7700 Management Interface 8.51.2.12, 8.52.200.111, 8.52.102.13, and 8.53.0.63 could allow an authenticated user to submit a specially crafted URL leading to privilege escalation and remote code execution. IBM X-Force ID: 246320.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/printAsXml with a crafted module parameter, an authenticated user can execute an arbitrary command. All SDC setups that include admportal are affected.

An authenticated mySCADA myPRO 8.26.0 user may be able to modify parameters to run commands directly in the operating system.

An issue was discovered in ONAP SDNC before Dublin. By executing sla/printAsGv with a crafted module parameter, an authenticated user can execute an arbitrary command. All SDC setups that include admportal are affected.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered in Softing uaGate SI 1.60.01. A CGI script is vulnerable to command injection with a maliciously crafted url parameter.

app/operator_panel/exec.php in the Operator Panel module in FusionPBX 4.4.3 suffers from a command injection vulnerability due to a lack of input validation that allows authenticated non-administrative attackers to execute commands on the host. This can further lead to remote code execution when combined with an XSS vulnerability also present in the FusionPBX Operator Panel module.

An issue was discovered in LibreNMS through 1.47. There is a command injection vulnerability in html/includes/graphs/device/collectd.inc.php where user supplied parameters are filtered with the mysqli_escape_real_string function. This function is not the appropriate function to sanitize command arguments as it does not escape a number of command line syntax characters such as ` (backtick), allowing an attacker to inject commands into the variable $rrd_cmd, which gets executed via passthru().

Grandstream UCM6204 before 1.0.19.20 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the backupUCMConfig file-backup parameter to the /cgi? URI.

Grandstream GWN7000 before 1.0.6.32 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/uci.apply update_nds_webroot_from_tmp API call.

An issue discovered in TenghuTOS TWS-200 firmware version:V4.0-201809201424 allows a remote attacker to execute arbitrary code via crafted command on the ping page component.

Grandstream GXV3370 before 1.0.1.41 and WP820 before 1.0.3.6 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in a /manager?action=getlogcat priority field.

Grandstream GWN7610 before 1.0.8.18 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the filename in a /ubus/controller.icc.update_nds_webroot_from_tmp update_nds_webroot_from_tmp API call.

Grandstream GXV3611IR_HD before 1.0.3.23 devices allow remote authenticated users to execute arbitrary code via shell metacharacters in the /goform/systemlog?cmd=set logserver field.

Shell Metacharacter Injection in the package installer on Zyxel NAS 326 version 5.21 and below allows an authenticated attacker to execute arbitrary code via multiple different requests.

A vulnerability in the web-based management interface of Cisco Identity Services Engine could allow an authenticated, remote attacker to inject arbitrary commands on the underlying operating system. This vulnerability is due to improper validation of user input within requests as part of the web-based management interface. An attacker could exploit this vulnerability by manipulating requests to the web-based management interface to contain operating system commands. A successful exploit could allow the attacker to execute arbitrary operating system commands on the underlying operating system with the privileges of the web services user. Cisco has not yet released software updates that address this vulnerability.

A vulnerability in the web management interface of the Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient validation of user-supplied parameters for certain API endpoints. An attacker could exploit this vulnerability by sending crafted input to an affected API endpoint. A successful exploit could allow an attacker to execute arbitrary commands on the device with low system privileges. To successfully exploit this vulnerability, an attacker would need valid credentials for a user with Device permissions: by default, only Administrators, Security Approvers and Network Admins user accounts have these permissions.

Authenticated user can execute arbitrary commands in the context of the root user by providing payload in the "destination" field of the network test tools. This is similar to the vulnerability CVE-2021-28151 mitigated on the user interface level by blacklisting characters with JavaScript, however, it can still be exploited by sending POST requests directly.

A vulnerability in the web management interface of the Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system. The vulnerability is due to insufficient validation of user-supplied parameters for certain API endpoints. An attacker could exploit this vulnerability by sending crafted input to an affected API endpoint. A successful exploit could allow an attacker to execute arbitrary commands on the device with low system privileges. To successfully exploit this vulnerability, an attacker would need valid credentials for a user with Device permissions: by default, only Administrators, Security Approvers and Network Admins user accounts have these permissions.

Jenkins Git Client Plugin 2.8.4 and earlier and 3.0.0-rc did not properly restrict values passed as URL argument to an invocation of 'git ls-remote', resulting in OS command injection.

An low privileged remote attacker can execute OS commands with root privileges due to improper neutralization of special elements in user data.

A vulnerability in the “Remote Logging” functionality of the web application of ctrlX OS allows a remote authenticated (low-privileged) attacker to execute arbitrary OS commands in the context of user “root” via a crafted HTTP request.

In some Lenovo ThinkServer-branded servers, a command injection vulnerability exists in the BMC firmware download command. This allows a privileged user to download and execute arbitrary code inside the BMC. This can only be exploited by authorized privileged users.

A vulnerability was found in Raisecom MSG1200, MSG2100E, MSG2200 and MSG2300 3.90. It has been classified as critical. This affects the function sslvpn_config_mod of the file /vpn/list_service_manage.php of the component Web Interface. The manipulation of the argument template/stylenum leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-273561 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

IBM Security Guardium 11.3, 11.4, 11.5, and 12.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 271524.

A vulnerability, which was classified as critical, has been found in Ruijie RG-UAC 1.0. Affected by this issue is the function get_ip_addr_details of the file /view/dhcp/dhcpConfig/commit.php. The manipulation of the argument ethname leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-269156. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Ruijie RG-UAC 1.0 and classified as critical. This vulnerability affects unknown code of the file /view/vpn/autovpn/sub_commit.php. The manipulation of the argument key leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-269158 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Insert or Embed Articulate Content into WordPress plugin before 4.3000000024 does not prevent authors from uploading arbitrary files to the site, which may allow them to upload PHP shells on affected sites.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "user" parameter in setVpnAccountCfg.

TOTOLINK X5000R V9.1.0cu.2350_B20230313 was discovered to contain an OS command injection vulnerability via the "recHour" parameter in setScheduleCfg.

An OS command injection vulnerability exists in multiple D-Link routers—confirmed on DIR-300 rev A (v1.05) and DIR-615 rev D (v4.13)—via the authenticated tools_vct.xgi CGI endpoint. The web interface fails to properly sanitize user-supplied input in the pingIp parameter, allowing attackers with valid credentials to inject arbitrary shell commands. Exploitation enables full device compromise, including spawning a telnet daemon and establishing a root shell. The vulnerability is present in firmware versions that expose tools_vct.xgi and use the Mathopd/1.5p6 web server. No vendor patch is available, and affected models are end-of-life.

A vulnerability has been found in Sangfor Operation and Maintenance Management System up to 3.0.8. This vulnerability affects the function uploadCN of the file VersionController.java. The manipulation of the argument filename leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A Remote Code Execution (RCE) vulnerability was found in includes/baijiacms/common.inc.php in baijiacms v4.

Jenkins Docker Commons Plugin 1.17 and earlier does not sanitize the name of an image or a tag, resulting in an OS command execution vulnerability exploitable by attackers with Item/Configure permission or able to control the contents of a previously configured job's SCM repository.

An OS command injection vulnerability has been reported to affect Video Station. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following version: Video Station 5.7.2 ( 2023/11/23 ) and later

OS command injection vulnerability in the WEB UI (the setting page) exists in Wi-Fi AP UNIT 'AC-WPS-11ac series'. If exploited, an arbitrary OS command may be executed by a remote attacker who can log in to the product.

An authenticated user may be able to misuse parameters to inject arbitrary operating system commands into mySCADA myPRO versions 8.25.0 and prior.

OS Command Injection vulnerability in the db_optimize component of Device42 Asset Management Appliance allows an authenticated attacker to execute remote code on the device. This issue affects: Device42 CMDB version 18.01.00 and prior versions.

A low privileged remote attacker can trigger the execution of arbitrary OS commands as root due to improper neutralization of special elements in the variable PROXY_HTTP_PORT in mGuard devices.

ASUS RT-AX55’s authentication-related function has a vulnerability of insufficient filtering of special characters within its code-authentication module. An authenticated remote attacker can exploit this vulnerability to perform a Command Injection attack to execute arbitrary commands, disrupt the system or terminate services.

A low privileged remote attacker can read and write files as root due to improper neutralization of special elements in the variable EMAIL_RELAY_PASSWORD in mGuard devices.

meterN 1.2.3 contains an authenticated remote code execution vulnerability in admin_meter2.php and admin_indicator2.php scripts. Attackers can exploit the 'COMMANDx' and 'LIVECOMMANDx' POST parameters to execute arbitrary system commands with administrative privileges.

In TOTOLINK X5000r v9.1.0cu.2350_b20230313, the file /cgi-bin/cstecgi.cgi contains an OS command injection vulnerability in delBlacklist. Authenticated Attackers can send malicious packet to execute arbitrary commands.