Coolify is an open-source and self-hostable tool for managing servers, applications, and databases. Prior to version 4.0.0-beta.420.7, a Remote Code Execution (RCE)*vulnerability exists in Coolify's application deployment workflow. This flaw allows a low-privileged member to inject arbitrary Docker Compose directives during project creation or updates. By defining a malicious service that mounts the host filesystem, an attacker can achieve root-level command execution on the host OS, completely bypassing container isolation. Version 4.0.0-beta.420.7 contains a patch for the issue.

Due to programming error in function module and report, IS-OIL component in SAP ECC and SAP S/4HANA allows an authenticated attacker to inject an arbitrary operating system command into an unprotected parameter in a common (default) extension.  On successful exploitation, the attacker can read or modify the system data as well as shut down the system.

Atos Unify OpenScape Session Border Controller through V10 R3.01.03 allows execution of OS commands as root user by low-privileged authenticated users.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with low privileges may use a command injection in a HTTP POST request releated to font configuration operations to gain full access to the device.

A vulnerability was found in TamronOS up to 20230703. It has been classified as critical. This affects an unknown part of the file /api/ping. The manipulation of the argument host leads to os command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-233475. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

An OS command injection vulnerability exists in the api.cgi cmd.mvpn.x509.write functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.This vulnerability is specifically for the `system` call in the file `/web/MANGA/cgi-bin/api.cgi` for firmware version 6.3.5 at offset 0x4bddb8.

A vulnerability was found in Ruijie BCR810W 2.5.10. It has been rated as critical. This issue affects some unknown processing of the component Tracert Page. The manipulation leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-233477 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

IBM Security Guardium 10.6, 11.3, 11.4, and 11.5 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 258824.

An OS Command Injection vulnerability in the Admin panel in Curo UC300 5.42.1.7.1.63R1 allows local attackers to inject arbitrary OS Commands via the "IP Addr" parameter.

In PHOENIX CONTACTs WP 6xxx series web panels in versions prior to 4.0.10 a remote attacker with low privileges may use a specific HTTP POST releated to certificate operations to gain full access to the device.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

OctoPrint provides a web interface for controlling consumer 3D printers. OctoPrint versions up until and including 1.11.2 contain a vulnerability that allows an authenticated attacker to upload a file under a specially crafted filename that will allow arbitrary command execution if said filename becomes included in a command defined in a system event handler and said event gets triggered. If no event handlers executing system commands with uploaded filenames as parameters have been configured, this vulnerability does not have an impact. The vulnerability is patched in version 1.11.3. As a workaround, OctoPrint administrators who have event handlers configured that include any kind of filename based placeholders should disable those by setting their `enabled` property to `False` or unchecking the "Enabled" checkbox in the GUI based Event Manager. Alternatively, OctoPrint administrators should set `feature.enforceReallyUniversalFilenames` to `true` in `config.yaml` and restart OctoPrint, then vet the existing uploads and make sure to delete any suspicious looking files. As always, OctoPrint administrators are advised to not expose OctoPrint on hostile networks like the public internet, and to vet who has access to their instance.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow authenticated administrators to execute commands via a network. QuTScloud is not affected. We have already fixed the vulnerability in the following versions: QuTS hero h4.5.4.2626 build 20231225 and later QTS 4.5.4.2627 build 20231225 and later

An OS command injection vulnerability exists in the data.cgi xfer_dns functionality of peplink Surf SOHO HW1 v6.3.5 (in QEMU). A specially crafted HTTP request can lead to command execution. An attacker can make an authenticated HTTP request to trigger this vulnerability.

Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in SonicWall GMS, SonicWall Analytics enables an authenticated attacker to execute arbitrary code with root privileges. This issue affects GMS: 9.3.2-SP1 and earlier versions; Analytics: 2.5.0.4-R7 and earlier versions.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

IBM Security Verify Governance, Identity Manager 10.0 could allow a remote authenticated attacker to execute arbitrary commands on the system by sending a specially crafted request. IBM X-Force ID: 257873.

TN-5900 Series firmware versions v3.3 and prior are vulnerable to command-injection vulnerability. This vulnerability stems from insufficient input validation and improper authentication in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

OS command injection occurring in versions of OpenEMR before 5.0.1.4 allows a remote authenticated attacker to execute arbitrary commands by making a crafted request to interface/fax/fax_dispatch.php after modifying the "hylafax_enscript" global variable in interface/super/edit_globals.php.

mailcow is a mail server suite based on Dovecot, Postfix and other open source software, that provides a modern web UI for user/server administration. A vulnerability has been discovered in mailcow which allows an attacker to manipulate internal Dovecot variables by using specially crafted passwords during the authentication process. The issue arises from the behavior of the `passwd-verify.lua` script, which is responsible for verifying user passwords during login attempts. Upon a successful login, the script returns a response in the format of "password=<valid-password>", indicating the successful authentication. By crafting a password with additional key-value pairs appended to it, an attacker can manipulate the returned string and influence the internal behavior of Dovecot. For example, using the password "123 mail_crypt_save_version=0" would cause the `passwd-verify.lua` script to return the string "password=123 mail_crypt_save_version=0". Consequently, Dovecot will interpret this string and set the internal variables accordingly, leading to unintended consequences. This vulnerability can be exploited by an authenticated attacker who has the ability to set their own password. Successful exploitation of this vulnerability could result in unauthorized access to user accounts, bypassing security controls, or other malicious activities. This issue has been patched in version `2023-05a`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. QuTScloud, QVR, QES are not affected. We have already fixed the vulnerability in the following versions: QTS 4.5.4.2790 build 20240605 and later QuTS hero h4.5.4.2626 build 20231225 and later

AMI BMC contains a vulnerability in the SPX REST API, where an attacker with the required privileges can inject arbitrary shell commands, which may lead to code execution, denial of service, information disclosure, or data tampering.

A improper neutralization of special elements used in an os command ('os command injection') in Fortinet FortiWLM version 8.6.0 through 8.6.5 and 8.5.0 through 8.5.4 allows attacker to execute unauthorized code or commands via specifically crafted HTTP get request parameters.

When adding a remote backup location, an authenticated user can pass arbitrary OS commands through the username field. The username is passed without sanitization into CMD running as NT/Authority System. An authenticated attacker can leverage this vulnerability to execute arbitrary code with system-level access to the CyberPower PowerPanel Enterprise server.

An OS Command injection vulnerability exists in Suprema BioStar 2 before V2.9.1, which allows authenticated users to execute arbitrary OS commands on the BioStar 2 server.

The Dataprobe iBoot PDU running firmware version 1.43.03312023 or earlier is vulnerable to command injection via the `user-name` URL parameter. An authenticated malicious agent can exploit this vulnerability to execute arbitrary command on the underlying Linux operating system.

Improper input sanitization within the restricted administration shell on UCOPIA Wireless Appliance devices using firmware version 5.1.x before 5.1.13 allows authenticated remote attackers to escape the shell and escalate their privileges by adding a LocalCommand to the SSH configuration file in the user home folder.

TN-4900 Series firmware versions v1.2.4 and prior and TN-5900 Series firmware versions v3.3 and prior are vulnerable to the command injection vulnerability. This vulnerability stems from insufficient input validation in the key-generation function, which could potentially allow malicious users to execute remote code on affected devices.

A vulnerability arises out of a failure to comprehensively sanitize the processing of a zip file(s). Incomplete neutralization of external commands used to control the process execution of the .zip application allows an authorized user to obtain control of the .zip application to execute arbitrary commands or obtain elevation of system privileges.

A post-authentication command injection vulnerability in the NTP feature of Zyxel NBG6604 firmware version V1.01(ABIR.1)C0 could allow an authenticated attacker to execute some OS commands remotely by sending a crafted HTTP request.

OS Command Injection vulnerability in Ruijie X30-PRO X30-PRO-V1_09241521 allowing attackers to execute arbitrary commands via a crafted POST request to the module_get in file /usr/local/lua/dev_sta/host_access_delay.lua.

Versions 00.07.00 through 00.07.03 of Teltonika’s RUT router firmware contain an operating system (OS) command injection vulnerability in a Lua service. An attacker could exploit a parameter in the vulnerable function that calls a user-provided package name by instead providing a package with a malicious name that contains an OS command injection payload.

OS Command Injection vulnerability in Ruijie RG-EW1200 EW_3.0(1)B11P227_EW1200_11130208RG-EW1200 V1.00 allowing attackers to execute arbitrary commands via a crafted POST request to the module_get in file /usr/local/lua/dev_sta/networkConnect.lua.

OS Command Injection vulnerability in Ruijie RG-EW1800GX PRO B11P226_EW1800GX-PRO_10223117 allowing attackers to execute arbitrary commands via a crafted POST request to the module_set in file /usr/local/lua/dev_config/config_retain.lua.

OS Command Injection vulnerability in Ruijie M18 EW_3.0(1)B11P226_M18_10223116 allowing attackers to execute arbitrary commands via a crafted POST request to the module_get in file /usr/local/lua/dev_sta/networkConnect.lua.

Improper neutralization of active check command arguments in Checkmk < 2.1.0p32, < 2.0.0p38, < 2.2.0p4 leads to arbitrary command execution for authenticated users.

OS Command Injection vulnerability in Ruijie RG-BCR RG-BCR600W allowing attackers to execute arbitrary commands via a crafted POST request to the run_tcpdump in file /usr/lib/lua/luci/controller/admin/common_tcpdump.lua.

OS Command Injection vulnerability in Ruijie RG-S1930 S1930SWITCH_3.0(1)B11P230 allowing attackers to execute arbitrary commands via a crafted POST request to the module_update in file /usr/local/lua/dev_config/ace_sw.lua.

OS Command Injection vulnerability in Ruijie X30-PRO X30-PRO-V1_09241521 allowing attackers to execute arbitrary commands via a crafted POST request to the setWisp in file /usr/lib/lua/luci/modules/wireless.lua.

OS Command Injection vulnerability in Ruijie X60 PRO X60_10212014RG-X60 PRO V1.00/V2.00 allowing attackers to execute arbitrary commands via a crafted POST request to the module_set in file /usr/local/lua/dev_config/config_retain.lua.

A vulnerability was found in D-Link DCS-932L 2.18.01. It has been rated as critical. Affected by this issue is the function setSystemWizard/setSystemControl of the file /setSystemWizard. The manipulation of the argument AdminID leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

IPFire versions prior to 2.29 (Core Update 198) contain a command injection vulnerability that allows an authenticated attacker to execute arbitrary commands as the 'nobody' user via the BE_NAME parameter when installing a blacklist. When a blacklist is installed the application issues an HTTP POST to /cgi-bin/urlfilter.cgi and interpolates the value of BE_NAME directly into a shell invocation without appropriate sanitation. Crafted input can inject shell metacharacters, leading to arbitrary command execution in the context of the 'nobody' user.

OS Command Injection vulnerability in Ruijie RG-EW1200G PRO RG-EW1200G PRO V1.00/V2.00/V3.00/V4.00 allowing attackers to execute arbitrary commands via a crafted POST request to the module_get in file /usr/local/lua/dev_sta/networkConnect.lua.

OS Command Injection vulnerability in Ruijie RG-RAP2200(E) 247 2200 allowing attackers to execute arbitrary commands via a crafted POST request to the module_set in file /usr/local/lua/dev_sta/nbr_cwmp.lua.

Kiwi TCMS is an open source test management system. In kiwitcms/Kiwi v12.2 and prior and kiwitcms/enterprise v12.2 and prior, the `changelog.yml` workflow is vulnerable to command injection attacks because of using an untrusted `github.head_ref` field. The `github.head_ref` value is an attacker-controlled value. Assigning the value to `zzz";echo${IFS}"hello";#` can lead to command injection. Since the permission is not restricted, the attacker has a write-access to the repository. Commit 834c86dfd1b2492ccad7ebbfd6304bfec895fed2 of the kiwitcms/Kiwi repository and commit e39f7e156fdaf6fec09a15ea6f4e8fec8cdbf751 of the kiwitcms/enterprise repository contain a fix for this issue.

OS Command Injection vulnerability in Ruijie RG-EW1800GX B11P226_EW1800GX_10223121 allowing attackers to execute arbitrary commands via a crafted POST request to the module_set in file /usr/local/lua/dev_sta/nbr_cwmp.lua.

A remote authenticated arbitrary command execution vulnerability was discovered in Aruba AirWave Management Platform version(s): Prior to 8.2.12.0. Vulnerabilities in the AirWave web-base management interface could allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as a lower privileged user on the underlying operating system leading to partial system compromise.

OS Command Injection vulnerability in Ruijie RG-EW1800GX PRO B11P226_EW1800GX-PRO_10223117 allowing attackers to execute arbitrary commands via a crafted POST request to the module_set in file /usr/local/lua/dev_sta/nbr_cwmp.lua.